| /src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/ |
| bcm2835-rpi.dtsi | 1 #include <dt-bindings/power/raspberrypi-power.h>
24 power: power { label
25 compatible = "raspberrypi,bcm2835-power";
27 #power-domain-cells = <1>;
67 power-domains = <&power RPI_POWER_DOMAIN_USB>;
71 power-domains = <&power RPI_POWER_DOMAIN_VEC>
[all...] |
| rk3036.dtsi | 9 #include <dt-bindings/power/rk3036-power.h>
115 power-domains = <&power RK3036_PD_GPU>;
128 power-domains = <&power RK3036_PD_VPU>;
137 power-domains = <&power RK3036_PD_VPU>;
150 power-domains = <&power RK3036_PD_VIO>
344 power: power-controller { label in label:grf
[all...] |
| /src/games/trek/ |
| impulse.c | 46 ** move under impulse power
54 int power; local in function:impulse
68 power = 20 + 100 * dist;
69 percent = 100 * power / Ship.energy + 0.5;
|
| warp.c | 49 ** MOVE UNDER WARP POWER
80 double power; local in function:warp
101 /* check to see that we are not using an absurd amount of power */
102 power = (dist + 0.05) * Ship.warp3;
103 percent = 100 * power / Ship.energy + 0.5;
|
| /src/sys/dev/fdt/ |
| fdt_power.c | 55 struct fdtbus_power_controller *power; local in function:fdtbus_register_power_controller
57 power = kmem_alloc(sizeof(*power), KM_SLEEP);
58 power->power_dev = dev;
59 power->power_phandle = phandle;
60 power->power_funcs = funcs;
62 LIST_INSERT_HEAD(&fdtbus_power_controllers, power, power_next);
70 struct fdtbus_power_controller *power; local in function:fdtbus_power_reset
72 LIST_FOREACH(power, &fdtbus_power_controllers, power_next) {
73 if (power->power_funcs->reset
81 struct fdtbus_power_controller *power; local in function:fdtbus_power_poweroff
[all...] |
| /src/sbin/nvmectl/ |
| power.c | 1 /* $NetBSD: power.c,v 1.6 2020/09/27 18:17:35 jdolecek Exp $ */
31 __RCSID("$NetBSD: power.c,v 1.6 2020/09/27 18:17:35 jdolecek Exp $");
33 __FBSDID("$FreeBSD: head/sbin/nvmecontrol/power.c 329824 2018-02-22 13:32:31Z wma $");
110 err(1, "set feature power mgmt request failed");
113 errx(1, "set feature power mgmt request returned error");
126 err(1, "set feature power mgmt request failed");
129 errx(1, "set feature power mgmt request returned error");
131 printf("Current Power State is %d, Workload Hint %d\n",
137 power(int argc, char *argv[]) function in typeref:typename:void
156 fprintf(stderr, "Invalid power state number: %s\n", optarg)
[all...] |
| /src/sys/arch/hpcmips/tx/ |
| tx39iovar.h | 35 txreg_t dir, in, out, power; member in struct:tx39io_port_status
|
| /src/games/warp/ |
| score.c | 375 double power, effectscore, starscore, pi_over_2; local in function:wavescore
385 power = pow((double)inumenemies+ /* total number of enemies */
395 power += (350.0 - (double)inumstars) * ((double)inumenemies - 5.0);
397 power += ((double)inumstars - 850.0) * ((double)inumenemies - 2.0);
399 atan2(power, (double) timer + 1.0) / pi_over_2;
410 effectscore, power, timer + 1);
|
| /src/games/battlestar/ |
| globals.c | 283 int pleasure, power, ego; variable in typeref:typename:int
|
| /src/sys/arch/macppc/dev/ |
| apm.c | 130 * SCFLAG_NOPRINT: do not output APM power messages due to
131 * a power change event.
133 * SCFLAG_PCTPRINT: do not output APM power messages due to
134 * to a power change event unless the battery
252 struct apm_power_info *power; local in function:apmioctl
299 power = (struct apm_power_info *)data;
303 power->ac_state = ((batt.flags & PMU_PWR_AC_PRESENT) ?
305 power->battery_life =
314 power->battery_state = APM_BATT_UNKNOWN;
315 power->minutes_left = 0
[all...] |
| drivebay.c | 162 CTLTYPE_INT, "power", "drive power",
259 int power = (reg & I_POWER) != 0; local in function:sysctl_power
263 node.sysctl_data = &power;
266 power = *(int *)node.sysctl_data;
268 if (power != 0) reg |= O_POWER;
280 node.sysctl_data = &power;
|
| /src/sys/dev/ic/ |
| pl181.c | 365 uint32_t power; local in function:plmmc_bus_rod
368 power = MMCI_READ(sc, MMCI_POWER_REG);
370 power |= MMCI_POWER_ROD;
372 power &= ~MMCI_POWER_ROD;
374 MMCI_WRITE(sc, MMCI_POWER_REG, power);
|
| arn9285.c | 415 /* No PA calibration needed for high power solutions. */
435 /* Power down PA drivers. */
533 /* Power down PA drivers. */
769 /* NB: No open loop power control for AR9285. */
805 int16_t power[ATHN_POWER_COUNT]; local in function:ar9285_set_txpower
811 /* Compute transmit power reduction due to antenna gain. */
847 memset(power, 0, sizeof(power));
849 power[ATHN_POWER_OFDM6 ] =
850 power[ATHN_POWER_OFDM9 ]
[all...] |
| arn9287.c | 122 /* Determine if open loop power control should be used. */
400 /* Closed loop power control. */
444 int16_t pwr = 0, power[ATHN_POWER_COUNT]; local in function:ar9287_set_txpower
450 /* Compute transmit power reduction due to antenna gain. */
456 * Reduce scaled power by number of active chains to get per-chain
457 * transmit power level.
495 memset(power, 0, sizeof(power));
497 power[ATHN_POWER_OFDM6 ] =
498 power[ATHN_POWER_OFDM9 ]
[all...] |
| arn9380.c | 171 * Some 3-stream chips may exceed the PCIe power requirements,
723 int16_t power[ATHN_POWER_COUNT]; local in function:ar9380_set_txpower
769 memset(power, 0, sizeof(power));
771 power[ATHN_POWER_OFDM6 ] =
772 power[ATHN_POWER_OFDM9 ] =
773 power[ATHN_POWER_OFDM12] =
774 power[ATHN_POWER_OFDM18] =
775 power[ATHN_POWER_OFDM24] = tpow_ofdm[0];
776 power[ATHN_POWER_OFDM36] = tpow_ofdm[1]
[all...] |
| arn5416.c | 528 int16_t pwr = 0, pwroff, max_ant_gain, power[ATHN_POWER_COUNT]; local in function:ar5416_set_txpower
536 /* Compute transmit power reduction due to antenna gain. */
542 * Reduce scaled power by number of active chains to get per-chain
543 * transmit power level.
613 memset(power, 0, sizeof(power));
615 power[ATHN_POWER_OFDM6 ] =
616 power[ATHN_POWER_OFDM9 ] =
617 power[ATHN_POWER_OFDM12] =
618 power[ATHN_POWER_OFDM18]
[all...] |
| /src/sys/external/bsd/drm2/dist/drm/i2c/ |
| ch7006_mode.c | 301 uint8_t *power = &priv->state.regs[CH7006_POWER]; local in function:ch7006_setup_power_state
307 *power = CH7006_POWER_RESET;
312 *power |= bitfs(CH7006_POWER_LEVEL, CVBS_OFF);
315 *power |= bitfs(CH7006_POWER_LEVEL, SVIDEO_OFF);
318 *power |= bitfs(CH7006_POWER_LEVEL, NORMAL) |
325 *power |= bitfs(CH7006_POWER_LEVEL, FULL_POWER_OFF);
327 *power |= bitfs(CH7006_POWER_LEVEL, POWER_OFF);
|
| /src/sys/external/bsd/drm2/dist/drm/i915/gt/ |
| intel_rps_types.h | 71 u8 rp1_freq; /* "less than" RP0 power/freqency */
85 } power; member in struct:intel_rps
|
| /src/usr.bin/moduli/qsieve/ |
| qsieve.c | 221 int power; local in function:main
238 * Set power to the length in bits of the prime to be generated.
241 power = (int) strtoul(argv[2], NULL, 10);
242 if ((unsigned)power > TEST_MAXIMUM) {
243 errx(1, "Too many bits: %d > %lu.", power,
245 } else if (power < TEST_MINIMUM) {
246 errx(1, "Too few bits: %d < %lu.", power,
250 power--; /* decrement before squaring */
259 (power * power) >> (SHIFT_WORD - TEST_POWER))
[all...] |
| /src/sys/dev/i2c/ |
| dbcool_var.h | 143 struct dbcool_power_control *power; member in struct:chip_id
|
| ihidev.c | 255 /* power down until we're opened */
258 aprint_error_dev(sc->sc_dev, "failed to power down\n");
262 aprint_error_dev(self, "couldn't establish power handler\n");
280 aprint_error_dev(sc->sc_dev, "failed to power down\n");
302 printf("ihidev power off\n");
305 aprint_error_dev(sc->sc_dev, "failed to power down\n");
318 printf("ihidev power reset\n");
542 int power = *(int *)arg; local in function:ihidev_hid_command
546 power,
551 device_xname(sc->sc_dev), power));
[all...] |
| /src/sys/dev/pcmcia/ |
| pcmcia_cis.c | 1051 u_int power, timing, iospace, irq, memspace, misc; local in function:decode_cftable_entry
1151 power = reg & PCMCIA_TPCE_FS_POWER_MASK;
1158 if (power) {
1159 /* skip over power, don't save */
1161 for (i = 0; i < power; i++) {
|
| /src/sys/external/bsd/drm2/dist/drm/nouveau/nvkm/engine/disp/ |
| ior.h | 60 void (*power)(struct nvkm_ior *, bool normal, bool pu, member in struct:nvkm_ior_func
77 void (*power)(struct nvkm_ior *, int nr); member in struct:nvkm_ior_func::__anonfa17732f0508
|
| nouveau_nvkm_engine_disp_dp.c | 276 ior->func->dp.power(ior, ior->dp.nr);
391 /* Ensure sink is not in a low-power state. */
522 OUTP_DBG(&dp->outp, "aux power -> always");
533 OUTP_DBG(&dp->outp, "aux power -> demand");
586 * to on) before doing any AUX channel transactions. LVDS panel power
590 int power = nvkm_gpio_get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff); local in function:nvkm_dp_init
591 if (power == 0)
604 * the panel power GPIO to avoid breaking another output.
606 if (!nvkm_dp_enable(dp, true) && power == 0)
|
| /src/sys/dev/pci/ |
| if_wpivar.h | 116 int8_t power; member in struct:wpi_power_sample
|
