HomeSort by: relevance | last modified time | path
    Searched hist:1.1012 (Results 1 - 19 of 19) sorted by relevancy

  /src/sys/dev/mii/
igphyreg.h 1.4.86.1 Wed Jan 27 22:27:41 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
inbmphyreg.h 1.1.2.2 Wed Jan 27 22:27:41 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
  /src/sys/dev/pci/
if_wmvar.h 1.2.46.2 Wed Jan 27 22:27:42 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
pcidevs.h 1.1012 Tue Jan 19 00:00:51 UTC 2010 mbalmer regenerate
1.963.4.10 Wed Jan 27 22:27:42 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
pcidevs_data.h 1.1012 Fri Jan 22 08:01:49 UTC 2010 hubertf regen - thanks for the reminder @ veego
1.962.4.10 Wed Jan 27 22:27:42 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
if_wmreg.h 1.24.20.4 Wed Jan 27 22:27:42 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
pcidevs 1.1012 Tue Jan 12 21:23:38 UTC 2010 msaitoh rename some wm devices to know PHY type
1.962.4.10 Wed Jan 27 22:27:42 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
if_wm.c 1.162.4.12 Wed Jan 27 22:27:41 UTC 2010 sborrill Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
sys/dev/pci/if_wm.c 1.184-1.192, 1.194
sys/dev/pci/if_wmreg.h 1.29-1.35
sys/dev/pci/if_wmvar.h 1.5-1.8
sys/dev/pci/pcidevs 1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
sys/dev/pci/pcidevs.h regen
sys/dev/pci/pcidevs_data.h regen
sys/dev/mii/igphyreg.h 1.5
sys/dev/mii/inbmphyreg.h 1.1

- Add support for i82583V.
- Add some ICH9 and ICH10 devices.
- Add support for PCH.
- Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
- Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
chips don't set EECD_EE_PRES.
- Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
- Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
in PR#42422.
- PBA setting for i82574 is not 12K but 20K.
- Enable checking the management mode on 82574.
- Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
sometimes the driver misunderstood PHYs in mii_attach(). It was reported
by MATSUI Yoshihiro. We observed it on ICH9.
- Fix the checking of jumbo frame function
- Remove the extra macro definition for the offset 0x1a in EEPROM.
- Add missing break in wm_reset()...
- Fix the offset of WMREG_PBS...
- Make wm_reset() and wm_gmii_reset() close to e1000 driver.
At least, this change make wm_attach() stable on ICH9.
- Reset GMII interface after wm_reset() in wm_init().
- Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
the PHY.
- Add code about LPLU(Low Power Link Up) function. It seems that we have to
do the same work for ICH9.
- Fixes the rx stall problem on 82578 by MANY workaround code. We need more
work for 82577.
  /src/usr.bin/make/
var.c 1.1012 Fri Feb 11 21:44:10 UTC 2022 rillig make: remove comment about environment variable with empty name

At least on NetBSD, make cannot be fooled with an environment variable
having an empty name. When running '/usr/bin/env =undefined make', the
argument is parsed as a variable assignment, but putenv(3) refuses to
process an empty variable name. Calling execve(2) directly got a step
further, the kernel didn't filter '=undefined' from the environment
variables. But getenv(3) always returns NULL when querying the
environment variable with the empty name.

On other operating systems, things may be different. Trying to set an
environment variable with an empty name may cause errors in env(1),
putenv(3), execve(2), getenv(3) or other places, so don't add an
automatic test for now.
  /src/sys/arch/i386/conf/
GENERIC 1.1012 Sun Feb 13 04:22:41 UTC 2011 jym Add missing PUFFS (commented out).
  /src/sys/conf/
files 1.1012 Tue May 17 04:18:06 UTC 2011 mrg move and rename the uvm history code out of uvm_stat to "kernhist".

rename "UVMHIST" option to enable the uvm histories.

TODO:
- make UVMHIST properly depend upon KERNHIST
- enable dynamic registration of histories. this is mostly just
allocating something in a bitmap, and is only for viewing multiple
histories in a merged form.


tested on amd64 and sparc64.
  /src/doc/
CHANGES 1.1012 Thu Jan 31 00:37:02 UTC 2008 jmcneill Document improvements to azalia's Analog Devices AD1984 support.
3RDPARTY 1.1012 Sat Mar 16 01:00:16 UTC 2013 christos mention new tzcode
  /src/distrib/sets/lists/tests/
mi 1.1012 Sun Jan 17 23:00:41 UTC 2021 rillig lint: add more tests for system headers in strict bool mode
  /src/share/mk/
bsd.own.mk 1.1012 Sun Jul 23 20:45:31 UTC 2017 mrg GCC 5.3 now lives in gcc.old.
add Xfont2 to X11 list.
  /src/distrib/sets/lists/base/
mi 1.1012 Sun Nov 04 16:26:53 UTC 2012 christos add TPM sets.
shl.mi 1.1012 Sat Sep 06 18:31:03 UTC 2025 kre /libunbound/s/so.9/so.10/ (and obsolete libunbound.so.9.0.debug)

Hopefully will fix the build after unbound update.
  /src/distrib/sets/lists/man/
mi 1.1012 Fri Jun 29 23:30:18 UTC 2007 rumble Add read-only support for SGI's Extent File System.

Reviewed by pooka@.
  /src/distrib/sets/lists/comp/
mi 1.1012 Mon Feb 26 10:55:36 UTC 2007 yamt add syncobj.h.

Completed in 2124 milliseconds