HomeSort by: relevance | last modified time | path
    Searched hist:1.348 (Results 1 - 25 of 2868) sorted by relevancy

1 2 3 4 5 6 7 8 91011>>

  /src/share/man/man4/
ptcd.4 1.4.4.2 Sun Jun 23 11:09:54 UTC 2013 bouyer Pull up following revision(s) (requested by mbalmer in ticket #1863):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/gpio.4: revision 1.24
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
share/man/man4/Makefile: revision 1.593
share/man/man4/ptcd.4: revision 1.1, 1.3, 1.4
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
Mention ptcd(4) in the synopsis.

1.5.6.2 Thu Apr 16 07:01:38 UTC 2015 snj Pull up following revision(s) (requested by mbalmer in ticket #891):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/Makefile: revision 1.593
share/man/man4/gpio.4: revision 1.24
share/man/man4/ptcd.4: revision 1.1-1.4
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
--
Mention ptcd(4) in the synopsis.
--
Add ptcd(4).
--
Mention ibmcd(4).
--
Sort sections.
--
Sort SEE ALSO.

gpio.4 1.7.4.1 Sun Jun 23 11:09:54 UTC 2013 bouyer Pull up following revision(s) (requested by mbalmer in ticket #1863):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/gpio.4: revision 1.24
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
share/man/man4/Makefile: revision 1.593
share/man/man4/ptcd.4: revision 1.1, 1.3, 1.4
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
Mention ptcd(4) in the synopsis.

1.23.2.1 Thu Apr 16 07:01:38 UTC 2015 snj Pull up following revision(s) (requested by mbalmer in ticket #891):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/Makefile: revision 1.593
share/man/man4/gpio.4: revision 1.24
share/man/man4/ptcd.4: revision 1.1-1.4
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
--
Mention ptcd(4) in the synopsis.
--
Add ptcd(4).
--
Mention ibmcd(4).
--
Sort sections.
--
Sort SEE ALSO.

  /src/sys/dev/isa/
ptcd.c 1.3.22.2 Thu Apr 16 07:01:39 UTC 2015 snj Pull up following revision(s) (requested by mbalmer in ticket #891):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/Makefile: revision 1.593
share/man/man4/gpio.4: revision 1.24
share/man/man4/ptcd.4: revision 1.1-1.4
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
--
Mention ptcd(4) in the synopsis.
--
Add ptcd(4).
--
Mention ibmcd(4).
--
Sort sections.
--
Sort SEE ALSO.

1.3.4.2 Sun Jun 23 11:09:54 UTC 2013 bouyer Pull up following revision(s) (requested by mbalmer in ticket #1863):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/gpio.4: revision 1.24
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
share/man/man4/Makefile: revision 1.593
share/man/man4/ptcd.4: revision 1.1, 1.3, 1.4
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
Mention ptcd(4) in the synopsis.

  /src/sys/sys/
spawn.h 1.1.2.1 Thu Apr 12 17:05:38 UTC 2012 riz Pull up following revision(s) (requested by martin in ticket #175):
sys/kern/kern_exit.c: revision 1.238
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.4
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.5
sys/uvm/uvm_extern.h: revision 1.183
lib/libc/gen/posix_spawn_fileactions.c: revision 1.2
sys/kern/kern_exec.c: revision 1.348
sys/kern/kern_exec.c: revision 1.349
sys/compat/netbsd32/syscalls.master: revision 1.95
sys/uvm/uvm_glue.c: revision 1.159
sys/uvm/uvm_map.c: revision 1.317
sys/compat/netbsd32/netbsd32.h: revision 1.95
sys/kern/exec_elf.c: revision 1.38
sys/sys/spawn.h: revision 1.2
sys/sys/exec.h: revision 1.135
sys/compat/netbsd32/netbsd32_execve.c: revision 1.34
Rework posix_spawn locking and memory management:
- always provide a vmspace for the new proc, initially borrowing from proc0
(this part fixes PR 46286)
- increase parallelism between parent and child if arguments allow this,
avoiding a potential deadlock on exec_lock
- add a new flag for userland to request old (lockstepped) behaviour for
better error reporting
- adapt test cases to the previous two and add a new variant to test the
diagnostics flag
- fix a few memory (and lock) leaks
- provide netbsd32 compat
Fix asynchronous posix_spawn child exit status (and test for it).

exec.h 1.134.2.1 Thu Apr 12 17:05:38 UTC 2012 riz Pull up following revision(s) (requested by martin in ticket #175):
sys/kern/kern_exit.c: revision 1.238
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.4
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.5
sys/uvm/uvm_extern.h: revision 1.183
lib/libc/gen/posix_spawn_fileactions.c: revision 1.2
sys/kern/kern_exec.c: revision 1.348
sys/kern/kern_exec.c: revision 1.349
sys/compat/netbsd32/syscalls.master: revision 1.95
sys/uvm/uvm_glue.c: revision 1.159
sys/uvm/uvm_map.c: revision 1.317
sys/compat/netbsd32/netbsd32.h: revision 1.95
sys/kern/exec_elf.c: revision 1.38
sys/sys/spawn.h: revision 1.2
sys/sys/exec.h: revision 1.135
sys/compat/netbsd32/netbsd32_execve.c: revision 1.34
Rework posix_spawn locking and memory management:
- always provide a vmspace for the new proc, initially borrowing from proc0
(this part fixes PR 46286)
- increase parallelism between parent and child if arguments allow this,
avoiding a potential deadlock on exec_lock
- add a new flag for userland to request old (lockstepped) behaviour for
better error reporting
- adapt test cases to the previous two and add a new variant to test the
diagnostics flag
- fix a few memory (and lock) leaks
- provide netbsd32 compat
Fix asynchronous posix_spawn child exit status (and test for it).

proc.h 1.348 Wed May 09 19:55:35 UTC 2018 kre branches: 1.348.2;

Cause a process's user and system times to become non-decreasing.

This alters the invented values (ie: statistically calculated)
that are returned - for small values, the values are likely going to
be different than they were, but that's largely nonsense anyway
(except that the sum of utime & stime does equal cpu time consumed
by the process). Once the values get large enough to be meaningful
the difference made by this change will be in the noise, and irrelevant.

This needs a couple of additions to struct proc, so we are now into 8.99.17
Wed May 09 19:55:35 UTC 2018 kre branches: 1.348.2;

Cause a process's user and system times to become non-decreasing.

This alters the invented values (ie: statistically calculated)
that are returned - for small values, the values are likely going to
be different than they were, but that's largely nonsense anyway
(except that the sum of utime & stime does equal cpu time consumed
by the process). Once the values get large enough to be meaningful
the difference made by this change will be in the noise, and irrelevant.

This needs a couple of additions to struct proc, so we are now into 8.99.17
1.348.2.2 Mon Apr 13 08:05:20 UTC 2020 martin Mostly merge changes from HEAD upto 20200411
1.348.2.1 Mon Jun 10 22:09:57 UTC 2019 christos Sync with HEAD
  /src/lib/libc/gen/
posix_spawn_fileactions.c 1.1.2.1 Thu Apr 12 17:05:37 UTC 2012 riz branches: 1.1.2.1.4; 1.1.2.1.6;
Pull up following revision(s) (requested by martin in ticket #175):
sys/kern/kern_exit.c: revision 1.238
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.4
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.5
sys/uvm/uvm_extern.h: revision 1.183
lib/libc/gen/posix_spawn_fileactions.c: revision 1.2
sys/kern/kern_exec.c: revision 1.348
sys/kern/kern_exec.c: revision 1.349
sys/compat/netbsd32/syscalls.master: revision 1.95
sys/uvm/uvm_glue.c: revision 1.159
sys/uvm/uvm_map.c: revision 1.317
sys/compat/netbsd32/netbsd32.h: revision 1.95
sys/kern/exec_elf.c: revision 1.38
sys/sys/spawn.h: revision 1.2
sys/sys/exec.h: revision 1.135
sys/compat/netbsd32/netbsd32_execve.c: revision 1.34
Rework posix_spawn locking and memory management:
- always provide a vmspace for the new proc, initially borrowing from proc0
(this part fixes PR 46286)
- increase parallelism between parent and child if arguments allow this,
avoiding a potential deadlock on exec_lock
- add a new flag for userland to request old (lockstepped) behaviour for
better error reporting
- adapt test cases to the previous two and add a new variant to test the
diagnostics flag
- fix a few memory (and lock) leaks
- provide netbsd32 compat
Fix asynchronous posix_spawn child exit status (and test for it).

  /src/tests/lib/libc/gen/posix_spawn/
t_fileactions.c 1.2.2.2 Thu Apr 12 17:05:37 UTC 2012 riz Pull up following revision(s) (requested by martin in ticket #175):
sys/kern/kern_exit.c: revision 1.238
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.4
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.5
sys/uvm/uvm_extern.h: revision 1.183
lib/libc/gen/posix_spawn_fileactions.c: revision 1.2
sys/kern/kern_exec.c: revision 1.348
sys/kern/kern_exec.c: revision 1.349
sys/compat/netbsd32/syscalls.master: revision 1.95
sys/uvm/uvm_glue.c: revision 1.159
sys/uvm/uvm_map.c: revision 1.317
sys/compat/netbsd32/netbsd32.h: revision 1.95
sys/kern/exec_elf.c: revision 1.38
sys/sys/spawn.h: revision 1.2
sys/sys/exec.h: revision 1.135
sys/compat/netbsd32/netbsd32_execve.c: revision 1.34
Rework posix_spawn locking and memory management:
- always provide a vmspace for the new proc, initially borrowing from proc0
(this part fixes PR 46286)
- increase parallelism between parent and child if arguments allow this,
avoiding a potential deadlock on exec_lock
- add a new flag for userland to request old (lockstepped) behaviour for
better error reporting
- adapt test cases to the previous two and add a new variant to test the
diagnostics flag
- fix a few memory (and lock) leaks
- provide netbsd32 compat
Fix asynchronous posix_spawn child exit status (and test for it).

  /src/etc/
Makefile 1.348 Wed Nov 21 16:23:30 UTC 2007 njoly branches: 1.348.4; 1.348.6; 1.348.8;
Add tests to the obsolete files list to be installed.
Wed Nov 21 16:23:30 UTC 2007 njoly branches: 1.348.4; 1.348.6; 1.348.8;
Add tests to the obsolete files list to be installed.
.4; 1.348.6; 1.348.8;
Add tests to the obsolete files list to be installed.
.6; 1.348.8;
Add tests to the obsolete files list to be installed.
1.348.8.5 Sat Jan 17 20:43:41 UTC 2009 mjf Sync with HEAD.
1.348.8.4 Sun Oct 05 20:11:18 UTC 2008 mjf Sync with HEAD.
1.348.8.3 Mon Jun 02 13:21:19 UTC 2008 mjf Sync with HEAD.
1.348.8.2 Thu Apr 03 13:54:11 UTC 2008 mjf Sync with HEAD.
1.348.8.1 Thu Feb 21 20:44:54 UTC 2008 mjf Start where the mjf-devfs branch left off.
1.348.6.1 Mon Mar 24 07:14:40 UTC 2008 keiichi sync with head.
  /src/sys/dev/mii/
ukphy.c 1.43.14.1 Fri May 06 18:43:34 UTC 2016 snj Pull up following revision(s) (requested by msaitoh in ticket #1366):
sys/dev/pci/if_wm.c: 1.281, 1.318, 1.320, 1.324-1.332, 1.334, 1.336, 1.343-1.344, 1.347-1.348, 1.350, 1.376-1.382, 1.386-1.387, 1.389 via patch
sys/dev/pci/if_wmreg.h: 1.68-1.70, 1.73-1.77, 1.79-1.80, 1.82, 1.86-1.88 via patch
sys/dev/pci/if_wmvar.h: 1.22-1.23, 1.25-1.30 via patch
sys/dev/mii/igphy.c: 1.25
sys/dev/mii/ukphy.c: 1.48
Sync wm(4) as of if_wm.c rev 1.389 except SERDES, MSI/MSI-X, multiqueue
and NET_MPSAFE:
- Set ICH9 and ICH10's PBA size to 14K if the RX buffer size is more
than 4096. Almost the same as other OSes.
- For 82576 and newer devices, the PBA register is deleted. Don't write
PBA for those chips. Also change the calculation of RX packet buffer
size in new way.
- Print NVM image version and option ROM version.
- Add workaround for I210 Errata 25 and I211 Errata 10 (PLL bug). This
workaround is required if the NVM image version < 3.25.
- Fix a bug that wm_detach() didn't unmap the FHASH's area. Now
"drvctl -d wm0" -> "drvctl -r pci0" works on ICH* and PCH*.
- Add workaround for 82574 Errata 25 and 82583 Errata 12 "Dropped RX
packets" and for 82573 (unknown). Set GCR_L1_ACT_WITHOUT_L0S_RX bit.
The NVM Image version 2.1.4 and newer have this workaround.
- Check PHY type correctly. This change is required to use igphy(4)
device correctly.
- Disable LPLU (Low Power Link Up) on D0 state on 82574, 82583 and ICH*
too.
- Call wm_get_hw_control() correctly. This change fixes a bug that some
AMT based systems doesn't linkup at 1000BaseT. The problem was
observed on HP Compaq dc7700. A lot of fixes have been done for wm(4)
and igphy(4), so now PR#44893 should be fixed.
- Call wm_get_wakeup(sc) before checking WM_F_HAS_AMT. It's required to
check the existence of AMT correctly.
- Fix a problem that wm_gate_hw_phy_config_ich8lan() isn't called in
wm_reset() on PCH2.
- Clear WMREG_WUC in wm_reset() if the chip >= 82544. This might fix
the behavior on suspend/resume.
- Fix logic of wm_check_reset_block() on ICH* and PCH*. This change
might fix a problem that PHY's read/write functions can't get
semaphore.
- On ICH8, call wm_gig_downshift_workaround_ich8lan() when link changed
down.
- Drop PHY_CTRL_GBE_DIS explicitly in wm_lplu_d0_disable() in case BIOS
sets this bit.
- Fix two bugs in wm_kmrn_lock_loss_workaround_ich8lan(). Now the
function checks the status correctly but it causes linkdown up to 10
times, so it's disabled for the time being.
- PR/50527: David Binderman: Fix impossible code. Odd offsets need
special treatment.
- Fix RAL table's size of PCH2 and PCH_LPT.
- PCH_LPT (and newer device) is required to check FWSM_WLOCK_MAC bit to
determine the range of the RAL.
- Use sc->sc_itr instead of hard-coded number.
- Rename wm_tbi_check_link() to wm_tbi_tick() because this function
acts as mii_tick().
- ACK Accelerate Disable in the RFCTL register is not bit 13 but 12.
No binary change because this definition has not used yet.
- Add ACK data Disable bit's definition (not used yet).
- PHY_CTRL_GBE_DIS is not bit 4 but bit 6. This change has no any
effect by default because WM_WOL is not defined yet and
m_kmrn_lock_loss_workaround_ich8lan() is broken.
- Fix wm_check_mng_mode_ich8lan(). This function is used only when
WM_WOL is defined and it's disabled by default.
- Rename wm_check_reset_block() to wm_phy_resetisblocked() and make it
returns bool. No functional change.
- Reorder function definitions and macro definitions. No functional
change.
- Fix comment. Add comment. Update comment.
- KNF.
1.46.8.1 Fri Feb 26 22:08:17 UTC 2016 snj Pull up following revision(s) (requested by msaitoh in ticket #1102):
sys/dev/mii/igphy.c: 1.25
sys/dev/mii/ukphy.c: 1.48
sys/dev/pci/if_wm.c: revisions 1.308, 1.318, 1.320, 1.324-1.332, 1.334, 1.336, 1.343-1.344, 1.347-1.348, 1.350, 1.376-1.382, 1.386-1.389 via patch
sys/dev/pci/if_wmreg.h: revisions 1.68-1.70, 1.73-1.77, 1.79-1.80, 1.82, 1.86-1.88 via patch
sys/dev/pci/if_wmvar.h: revisions 1.22-1.23, 1.25-1.30 via patch
Sync wm(4) as of if_wm.c rev 1.389 except MSI/MSI-X, multiqueue and NET_MPSAFE:
- Add C2000 KX and 2.5G support.
- Set ICH9 and ICH10's PBA size to 14K if the RX buffer size is more than
4096. Almost the same as other OSes.
- For 82576 and newer devices, the PBA register is deleted. Don't write PBA
for those chips. Also change the calculation of RX packet buffer size in
new way.
- Fix a lot of bugs to make 82575 and newer SERDES based systems work.
- Print NVM image version and option ROM version.
- Add workaround for I210 Errata 25 and I211 Errata 10 (PLL bug). This
workaround is required if the NVM image version < 3.25.
- Fix a bug that wm_detach() didn't unmap the FHASH's area. Now
"drvct -d wm0" -> "drvctl -r pci0" works on ICH* and PCH*.
- Add workaround for 82574 Errata 25 and 82583 Errata 12 "Dropped RX packets"
and for 82573 (unknown). Set GCR_L1_ACT_WITHOUT_L0S_RX bit. The NVM Image
version 2.1.4 and newer have this workaround.
- Check PHY type correctly. This change is required to use igphy(4) device
correctly.
- Disable LPLU (Low Power Link Up) on D0 state on 82574, 82583 and ICH* too.
- Call wm_get_hw_control() correctly. This change fixes a bug that some AMT
based systems doesn't linkup at 1000BaseT. The problem was observed on HP
Compaq dc7700. A lot of fixes have been done for wm(4) and igphy(4), so now
PR#44893 should be fixed.
- Call wm_get_wakeup(sc) before checking WM_F_HAS_AMT. It's required to
check the existence of AMT correctly.
- Fix a problem that wm_gate_hw_phy_config_ich8lan() isn't called in
wm_reset() on PCH2.
- Clear WMREG_WUC in wm_reset() if the chip >= 82544. This might fix the
behavior on suspend/resume.
- Fix logic of wm_check_reset_block() on ICH* and PCH*. This change might fix
a problem that PHY's read/write functions can't get semaphore.
- On ICH8, call wm_gig_downshift_workaround_ich8lan() when link changed down.
- Drop PHY_CTRL_GBE_DIS explicitly in wm_lplu_d0_disable() in case BIOS sets
this bit.
- Fix two bugs in wm_kmrn_lock_loss_workaround_ich8lan(). Now the function
checks the status correctly but it causes linkdown up to 10 times, so it's
disabled for the time being.
- PR/50527: David Binderman: Fix impossible code. Odd offsets need special
treatment.
- Fix RAL table's size of PCH2 and PCH_LPT.
- PCH_LPT (and newer device) is required to check FWSM_WLOCK_MAC bit to
determine the range of the RAL.
- Use sc->sc_itr instead of hard-coded number.
- Rename wm_tbi_check_link() to wm_tbi_tick() because this function acts as
mii_tick().
- ACK Accelerate Disable in the RFCTL register is not bit 13 but 12.
No binary change because this definition has not used yet.
- Add ACK data Disable bit's definition (not used yet).
- PHY_CTRL_GBE_DIS is not bit 4 but bit 6. This change has no any effect by
default because WM_WOL is not defined yet and
m_kmrn_lock_loss_workaround_ich8lan() is broken.
- Fix wm_check_mng_mode_ich8lan(). This function is used only when WM_WOL is
defined and it's disabled by default.
- Rename wm_check_reset_block() to wm_phy_resetisblocked() and make it returns
bool. No functional change.
- Reorder function definitions and macro definitions. No functional change.
- Fix comment. Add comment. Update comment.
- KNF.
igphy.c 1.21.16.2 Fri May 06 18:43:34 UTC 2016 snj Pull up following revision(s) (requested by msaitoh in ticket #1366):
sys/dev/pci/if_wm.c: 1.281, 1.318, 1.320, 1.324-1.332, 1.334, 1.336, 1.343-1.344, 1.347-1.348, 1.350, 1.376-1.382, 1.386-1.387, 1.389 via patch
sys/dev/pci/if_wmreg.h: 1.68-1.70, 1.73-1.77, 1.79-1.80, 1.82, 1.86-1.88 via patch
sys/dev/pci/if_wmvar.h: 1.22-1.23, 1.25-1.30 via patch
sys/dev/mii/igphy.c: 1.25
sys/dev/mii/ukphy.c: 1.48
Sync wm(4) as of if_wm.c rev 1.389 except SERDES, MSI/MSI-X, multiqueue
and NET_MPSAFE:
- Set ICH9 and ICH10's PBA size to 14K if the RX buffer size is more
than 4096. Almost the same as other OSes.
- For 82576 and newer devices, the PBA register is deleted. Don't write
PBA for those chips. Also change the calculation of RX packet buffer
size in new way.
- Print NVM image version and option ROM version.
- Add workaround for I210 Errata 25 and I211 Errata 10 (PLL bug). This
workaround is required if the NVM image version < 3.25.
- Fix a bug that wm_detach() didn't unmap the FHASH's area. Now
"drvctl -d wm0" -> "drvctl -r pci0" works on ICH* and PCH*.
- Add workaround for 82574 Errata 25 and 82583 Errata 12 "Dropped RX
packets" and for 82573 (unknown). Set GCR_L1_ACT_WITHOUT_L0S_RX bit.
The NVM Image version 2.1.4 and newer have this workaround.
- Check PHY type correctly. This change is required to use igphy(4)
device correctly.
- Disable LPLU (Low Power Link Up) on D0 state on 82574, 82583 and ICH*
too.
- Call wm_get_hw_control() correctly. This change fixes a bug that some
AMT based systems doesn't linkup at 1000BaseT. The problem was
observed on HP Compaq dc7700. A lot of fixes have been done for wm(4)
and igphy(4), so now PR#44893 should be fixed.
- Call wm_get_wakeup(sc) before checking WM_F_HAS_AMT. It's required to
check the existence of AMT correctly.
- Fix a problem that wm_gate_hw_phy_config_ich8lan() isn't called in
wm_reset() on PCH2.
- Clear WMREG_WUC in wm_reset() if the chip >= 82544. This might fix
the behavior on suspend/resume.
- Fix logic of wm_check_reset_block() on ICH* and PCH*. This change
might fix a problem that PHY's read/write functions can't get
semaphore.
- On ICH8, call wm_gig_downshift_workaround_ich8lan() when link changed
down.
- Drop PHY_CTRL_GBE_DIS explicitly in wm_lplu_d0_disable() in case BIOS
sets this bit.
- Fix two bugs in wm_kmrn_lock_loss_workaround_ich8lan(). Now the
function checks the status correctly but it causes linkdown up to 10
times, so it's disabled for the time being.
- PR/50527: David Binderman: Fix impossible code. Odd offsets need
special treatment.
- Fix RAL table's size of PCH2 and PCH_LPT.
- PCH_LPT (and newer device) is required to check FWSM_WLOCK_MAC bit to
determine the range of the RAL.
- Use sc->sc_itr instead of hard-coded number.
- Rename wm_tbi_check_link() to wm_tbi_tick() because this function
acts as mii_tick().
- ACK Accelerate Disable in the RFCTL register is not bit 13 but 12.
No binary change because this definition has not used yet.
- Add ACK data Disable bit's definition (not used yet).
- PHY_CTRL_GBE_DIS is not bit 4 but bit 6. This change has no any
effect by default because WM_WOL is not defined yet and
m_kmrn_lock_loss_workaround_ich8lan() is broken.
- Fix wm_check_mng_mode_ich8lan(). This function is used only when
WM_WOL is defined and it's disabled by default.
- Rename wm_check_reset_block() to wm_phy_resetisblocked() and make it
returns bool. No functional change.
- Reorder function definitions and macro definitions. No functional
change.
- Fix comment. Add comment. Update comment.
- KNF.
1.23.2.1 Fri Feb 26 22:08:17 UTC 2016 snj Pull up following revision(s) (requested by msaitoh in ticket #1102):
sys/dev/mii/igphy.c: 1.25
sys/dev/mii/ukphy.c: 1.48
sys/dev/pci/if_wm.c: revisions 1.308, 1.318, 1.320, 1.324-1.332, 1.334, 1.336, 1.343-1.344, 1.347-1.348, 1.350, 1.376-1.382, 1.386-1.389 via patch
sys/dev/pci/if_wmreg.h: revisions 1.68-1.70, 1.73-1.77, 1.79-1.80, 1.82, 1.86-1.88 via patch
sys/dev/pci/if_wmvar.h: revisions 1.22-1.23, 1.25-1.30 via patch
Sync wm(4) as of if_wm.c rev 1.389 except MSI/MSI-X, multiqueue and NET_MPSAFE:
- Add C2000 KX and 2.5G support.
- Set ICH9 and ICH10's PBA size to 14K if the RX buffer size is more than
4096. Almost the same as other OSes.
- For 82576 and newer devices, the PBA register is deleted. Don't write PBA
for those chips. Also change the calculation of RX packet buffer size in
new way.
- Fix a lot of bugs to make 82575 and newer SERDES based systems work.
- Print NVM image version and option ROM version.
- Add workaround for I210 Errata 25 and I211 Errata 10 (PLL bug). This
workaround is required if the NVM image version < 3.25.
- Fix a bug that wm_detach() didn't unmap the FHASH's area. Now
"drvct -d wm0" -> "drvctl -r pci0" works on ICH* and PCH*.
- Add workaround for 82574 Errata 25 and 82583 Errata 12 "Dropped RX packets"
and for 82573 (unknown). Set GCR_L1_ACT_WITHOUT_L0S_RX bit. The NVM Image
version 2.1.4 and newer have this workaround.
- Check PHY type correctly. This change is required to use igphy(4) device
correctly.
- Disable LPLU (Low Power Link Up) on D0 state on 82574, 82583 and ICH* too.
- Call wm_get_hw_control() correctly. This change fixes a bug that some AMT
based systems doesn't linkup at 1000BaseT. The problem was observed on HP
Compaq dc7700. A lot of fixes have been done for wm(4) and igphy(4), so now
PR#44893 should be fixed.
- Call wm_get_wakeup(sc) before checking WM_F_HAS_AMT. It's required to
check the existence of AMT correctly.
- Fix a problem that wm_gate_hw_phy_config_ich8lan() isn't called in
wm_reset() on PCH2.
- Clear WMREG_WUC in wm_reset() if the chip >= 82544. This might fix the
behavior on suspend/resume.
- Fix logic of wm_check_reset_block() on ICH* and PCH*. This change might fix
a problem that PHY's read/write functions can't get semaphore.
- On ICH8, call wm_gig_downshift_workaround_ich8lan() when link changed down.
- Drop PHY_CTRL_GBE_DIS explicitly in wm_lplu_d0_disable() in case BIOS sets
this bit.
- Fix two bugs in wm_kmrn_lock_loss_workaround_ich8lan(). Now the function
checks the status correctly but it causes linkdown up to 10 times, so it's
disabled for the time being.
- PR/50527: David Binderman: Fix impossible code. Odd offsets need special
treatment.
- Fix RAL table's size of PCH2 and PCH_LPT.
- PCH_LPT (and newer device) is required to check FWSM_WLOCK_MAC bit to
determine the range of the RAL.
- Use sc->sc_itr instead of hard-coded number.
- Rename wm_tbi_check_link() to wm_tbi_tick() because this function acts as
mii_tick().
- ACK Accelerate Disable in the RFCTL register is not bit 13 but 12.
No binary change because this definition has not used yet.
- Add ACK data Disable bit's definition (not used yet).
- PHY_CTRL_GBE_DIS is not bit 4 but bit 6. This change has no any effect by
default because WM_WOL is not defined yet and
m_kmrn_lock_loss_workaround_ich8lan() is broken.
- Fix wm_check_mng_mode_ich8lan(). This function is used only when WM_WOL is
defined and it's disabled by default.
- Rename wm_check_reset_block() to wm_phy_resetisblocked() and make it returns
bool. No functional change.
- Reorder function definitions and macro definitions. No functional change.
- Fix comment. Add comment. Update comment.
- KNF.
  /src/sys/arch/sparc/sparc/
pmap.c 1.348 Sun Jan 29 11:49:58 UTC 2012 para branches: 1.348.6;
fix sparc after kmem_map is gone
Sun Jan 29 11:49:58 UTC 2012 para branches: 1.348.6;
fix sparc after kmem_map is gone
1.348.6.4 Sun Dec 03 11:36:43 UTC 2017 jdolecek update from HEAD
1.348.6.3 Wed Aug 20 00:03:24 UTC 2014 tls Rebase to HEAD as of a few days ago.
1.348.6.2 Mon Feb 25 00:28:58 UTC 2013 tls resync with head
1.348.6.1 Tue Nov 20 03:01:44 UTC 2012 tls Resync to 2012-11-19 00:00:00 UTC
  /src/sys/dev/ic/
com.c 1.348 Sun May 27 17:05:06 UTC 2018 jmcneill branches: 1.348.2;
Rename COM_TYPE_SUNXI -> COM_TYPE_DW_APB
Sun May 27 17:05:06 UTC 2018 jmcneill branches: 1.348.2;
Rename COM_TYPE_SUNXI -> COM_TYPE_DW_APB
1.348.2.3 Mon Apr 13 08:04:21 UTC 2020 martin Mostly merge changes from HEAD upto 20200411
1.348.2.2 Wed Apr 08 14:08:06 UTC 2020 martin Merge changes from current as of 20200406
1.348.2.1 Mon Jun 10 22:07:10 UTC 2019 christos Sync with HEAD
  /src/sys/kern/
vfs_syscalls.c 1.348 Fri Mar 28 05:02:08 UTC 2008 dholland branches: 1.348.2; 1.348.4;
Yet another rename workaround - this time check for . and .. early because
relookup() objects to being asked to handle them.
Fri Mar 28 05:02:08 UTC 2008 dholland branches: 1.348.2; 1.348.4;
Yet another rename workaround - this time check for . and .. early because
relookup() objects to being asked to handle them.
.2; 1.348.4;
Yet another rename workaround - this time check for . and .. early because
relookup() objects to being asked to handle them.
1.348.4.3 Tue Jun 17 09:15:03 UTC 2008 yamt sync with head.
1.348.4.2 Wed Jun 04 02:05:40 UTC 2008 yamt sync with head
1.348.4.1 Sun May 18 00:35:12 UTC 2008 yamt sync with head.
1.348.2.5 Sat Dec 27 23:14:24 UTC 2008 christos merge with head.
1.348.2.4 Thu Nov 20 20:45:39 UTC 2008 christos merge with head.
1.348.2.3 Sun Nov 09 01:54:31 UTC 2008 christos fix fhstat
make major and minor ull
1.348.2.2 Sat Nov 01 21:22:28 UTC 2008 christos Sync with head.
exec_elf.c 1.37.2.1 Thu Apr 12 17:05:36 UTC 2012 riz branches: 1.37.2.1.4; 1.37.2.1.6;
Pull up following revision(s) (requested by martin in ticket #175):
sys/kern/kern_exit.c: revision 1.238
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.4
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.5
sys/uvm/uvm_extern.h: revision 1.183
lib/libc/gen/posix_spawn_fileactions.c: revision 1.2
sys/kern/kern_exec.c: revision 1.348
sys/kern/kern_exec.c: revision 1.349
sys/compat/netbsd32/syscalls.master: revision 1.95
sys/uvm/uvm_glue.c: revision 1.159
sys/uvm/uvm_map.c: revision 1.317
sys/compat/netbsd32/netbsd32.h: revision 1.95
sys/kern/exec_elf.c: revision 1.38
sys/sys/spawn.h: revision 1.2
sys/sys/exec.h: revision 1.135
sys/compat/netbsd32/netbsd32_execve.c: revision 1.34
Rework posix_spawn locking and memory management:
- always provide a vmspace for the new proc, initially borrowing from proc0
(this part fixes PR 46286)
- increase parallelism between parent and child if arguments allow this,
avoiding a potential deadlock on exec_lock
- add a new flag for userland to request old (lockstepped) behaviour for
better error reporting
- adapt test cases to the previous two and add a new variant to test the
diagnostics flag
- fix a few memory (and lock) leaks
- provide netbsd32 compat
Fix asynchronous posix_spawn child exit status (and test for it).
  /src/sys/compat/netbsd32/
netbsd32_execve.c 1.33.2.1 Thu Apr 12 17:05:38 UTC 2012 riz branches: 1.33.2.1.4;
Pull up following revision(s) (requested by martin in ticket #175):
sys/kern/kern_exit.c: revision 1.238
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.4
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.5
sys/uvm/uvm_extern.h: revision 1.183
lib/libc/gen/posix_spawn_fileactions.c: revision 1.2
sys/kern/kern_exec.c: revision 1.348
sys/kern/kern_exec.c: revision 1.349
sys/compat/netbsd32/syscalls.master: revision 1.95
sys/uvm/uvm_glue.c: revision 1.159
sys/uvm/uvm_map.c: revision 1.317
sys/compat/netbsd32/netbsd32.h: revision 1.95
sys/kern/exec_elf.c: revision 1.38
sys/sys/spawn.h: revision 1.2
sys/sys/exec.h: revision 1.135
sys/compat/netbsd32/netbsd32_execve.c: revision 1.34
Rework posix_spawn locking and memory management:
- always provide a vmspace for the new proc, initially borrowing from proc0
(this part fixes PR 46286)
- increase parallelism between parent and child if arguments allow this,
avoiding a potential deadlock on exec_lock
- add a new flag for userland to request old (lockstepped) behaviour for
better error reporting
- adapt test cases to the previous two and add a new variant to test the
diagnostics flag
- fix a few memory (and lock) leaks
- provide netbsd32 compat
Fix asynchronous posix_spawn child exit status (and test for it).

syscalls.master 1.91.2.1 Thu Apr 12 17:05:37 UTC 2012 riz Pull up following revision(s) (requested by martin in ticket #175):
sys/kern/kern_exit.c: revision 1.238
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.4
tests/lib/libc/gen/posix_spawn/t_fileactions.c: revision 1.5
sys/uvm/uvm_extern.h: revision 1.183
lib/libc/gen/posix_spawn_fileactions.c: revision 1.2
sys/kern/kern_exec.c: revision 1.348
sys/kern/kern_exec.c: revision 1.349
sys/compat/netbsd32/syscalls.master: revision 1.95
sys/uvm/uvm_glue.c: revision 1.159
sys/uvm/uvm_map.c: revision 1.317
sys/compat/netbsd32/netbsd32.h: revision 1.95
sys/kern/exec_elf.c: revision 1.38
sys/sys/spawn.h: revision 1.2
sys/sys/exec.h: revision 1.135
sys/compat/netbsd32/netbsd32_execve.c: revision 1.34
Rework posix_spawn locking and memory management:
- always provide a vmspace for the new proc, initially borrowing from proc0
(this part fixes PR 46286)
- increase parallelism between parent and child if arguments allow this,
avoiding a potential deadlock on exec_lock
- add a new flag for userland to request old (lockstepped) behaviour for
better error reporting
- adapt test cases to the previous two and add a new variant to test the
diagnostics flag
- fix a few memory (and lock) leaks
- provide netbsd32 compat
Fix asynchronous posix_spawn child exit status (and test for it).
  /src/sys/arch/mac68k/mac68k/
machdep.c 1.348 Sun Aug 17 21:17:44 UTC 2014 joerg branches: 1.348.2;
Reorganize symbol table embedding. The existing option SYMTAB_SPACE is
replaced by the make option COPY_SYMTAB set to any value. The copy of
the symbol table is no longer put into a buffer in kern_ksyms.o, but a
small helper object. This object is build first with a dummy size, then
the kernel is linked to compute the real dimension of the symbol table
buffer. After that, the helper object is rebuild and the kernel linked
again.
Sun Aug 17 21:17:44 UTC 2014 joerg branches: 1.348.2;
Reorganize symbol table embedding. The existing option SYMTAB_SPACE is
replaced by the make option COPY_SYMTAB set to any value. The copy of
the symbol table is no longer put into a buffer in kern_ksyms.o, but a
small helper object. This object is build first with a dummy size, then
the kernel is linked to compute the real dimension of the symbol table
buffer. After that, the helper object is rebuild and the kernel linked
again.
1.348.2.2 Mon Aug 28 17:51:44 UTC 2017 skrll Sync with HEAD
1.348.2.1 Tue Sep 22 00:05:46 UTC 2015 skrll Sync with HEAD
  /src/sys/arch/amd64/conf/
GENERIC 1.348 Sun Jan 22 06:44:29 UTC 2012 christos branches: 1.348.2;
add a tpm driver from bsssd.sourceforge.net
Sun Jan 22 06:44:29 UTC 2012 christos branches: 1.348.2;
add a tpm driver from bsssd.sourceforge.net
1.348.2.7 Mon Sep 29 18:40:43 UTC 2014 msaitoh Pull up following revision(s) (requested by riastradh in ticket #1129):
sys/arch/amd64/conf/GENERIC: revision 1.385
Enable options VND_COMPRESSION in amd64/GENERIC.
1.348.2.6 Wed Aug 15 15:32:59 UTC 2012 sborrill Pull up the following revisions(s) (requested by martin in ticket #502):
sys/arch/cobalt/conf/GENERIC: patch
sys/arch/i386/conf/GENERIC: patch
sys/arch/i386/conf/XEN3_DOM0: patch
sys/arch/i386/conf/XEN3_DOMU: patch
sys/arch/mvmeppc/conf/GENERIC: patch
sys/arch/shark/conf/GENERIC: patch
sys/arch/sparc64/conf/GENERIC: patch
sys/arch/sparc64/conf/GENERIC.DEBUG: patch
sys/arch/zaurus/conf/GENERIC: patch

Switch off DIAGNOSTIC and/or DEBUG on release kernels.
Enable DIAGNOSTIC in DEBUG kernels to allow for option
being switched off in GENERIC.
1.348.2.5 Fri Jun 15 08:48:45 UTC 2012 sborrill Pull up the following revisions(s) (requested by riz in ticket #343):
sys/dev/usb/files.usb: revision 1.122
sys/dev/usb/if_urtw.c: revision 1.1
sys/dev/usb/if_urtwreg.h: revision 1.1
share/man/man4/Makefile: revision 1.586
share/man/man4/urtw.4: revision 1.1
distrib/sets/lists/man/mi: revision 1.1393
sys/dev/usb/usbdevs: revision 1.617
sys/arch/i386/conf/GENERIC: revision 1.357
sys/arch/amd64/conf/GENERIC: revision 1.1075 via patch

Add urtw(4) driver for Realtek RTL8187/RTL8187B 802.11b/g USB wireless
adapter. From OpenBSD.
1.348.2.4 Thu Jun 14 09:48:46 UTC 2012 sborrill Pull up the following revisions(s) (requested by riz in ticket #326):
distrib/sets/lists/base/mi: 1.989
distrib/sets/lists/man/mi: 1.1385
etc/mtree/NetBSD.dist.base: 1.99
share/man/man4/Makefile: 1.583
share/man/man4/urtwn.4: 1.1
share/man/man4/usb.4: 1.97
sys/arch/amd64/conf/GENERIC: 1.351
sys/arch/i386/conf/GENERIC: 1.1068
sys/dev/usb/files.usb: 1.121
sys/dev/usb/if_urtwn.c: 1.1-1.4
sys/dev/usb/if_urtwn_data.h: 1.1
sys/dev/usb/if_urtwnreg.h: 1.1
sys/dev/usb/if_urtwnvar.h: 1.1
sys/dev/usb/usbdevices.config: 1.13
sys/dev/usb/usbdevs: 1.621 via patch
sys/dev/usb/usbdevs.h: regen
sys/dev/usb/usbdevs_data.h: regen
sys/modules/if_urtwn/Makefile: 1.1
sys/modules/if_urtwn/if_urtwn.ioconf: 1.1

Add support for urtwn(4) wireless. Ported from OpenBSD
1.348.2.3 Tue Jun 12 22:07:07 UTC 2012 riz Remove test changes which accidentally snuck in on the netbsd-6 branch.
Oops.
1.348.2.2 Tue Jun 12 17:48:03 UTC 2012 riz Pull up following revision(s) (requested by abs in ticket #311):
sys/arch/netwinder/conf/GENERIC: revision 1.112
sys/arch/i386/conf/GENERIC: revision 1.1074
sys/arch/atari/conf/MILAN.in: revision 1.26
sys/arch/zaurus/conf/GENERIC: revision 1.54
sys/arch/shark/conf/GENERIC: revision 1.101
sys/arch/hpcmips/conf/MPC303: revision 1.60
sys/arch/i386/conf/XEN3_DOM0: revision 1.67
sys/arch/evbarm/conf/MPCSA_GENERIC: revision 1.29
sys/arch/vax/conf/GENERIC: revision 1.181
sys/arch/sparc/conf/KRUPS: revision 1.59
sys/arch/evbarm/conf/BEAGLEBOARD: revision 1.27
sys/arch/i386/conf/INSTALL_FLOPPY: revision 1.16
sys/arch/prep/conf/GENERIC: revision 1.163
sys/arch/hpcmips/conf/GENERIC: revision 1.216
sys/arch/sparc/conf/TADPOLE3GX: revision 1.56
sys/arch/shark/conf/INSTALL: revision 1.50
sys/arch/next68k/conf/GENERIC: revision 1.127
sys/arch/evbppc/conf/VIRTEX_GSRD2: revision 1.16
sys/arch/evbppc/conf/VIRTEX_DFC: revision 1.17
sys/arch/evbppc/conf/EXPLORA451: revision 1.48
sys/arch/bebox/conf/INSTALL: revision 1.54
sys/arch/next68k/conf/SLAB: revision 1.46
sys/arch/i386/conf/GENERIC_TINY: revision 1.132
sys/arch/bebox/conf/GENERIC: revision 1.131
sys/arch/amd64/conf/XEN3_DOM0: revision 1.84
sys/arch/amd64/conf/GENERIC: revision 1.356
sys/arch/evbarm/conf/MMNET_GENERIC: revision 1.6
share/man/man4/wscons.4: revision 1.31
sys/arch/hpcmips/conf/TX3912: revision 1.79
sys/arch/evbarm/conf/ARMADILLO9: revision 1.35
sys/arch/hpcsh/conf/GENERIC: revision 1.97
sys/arch/i386/conf/ALL: revision 1.339
sys/arch/hpcmips/conf/TX3922: revision 1.93
sys/arch/cats/conf/INSTALL: revision 1.82
sys/arch/sparc64/conf/GENERIC: revision 1.151
sys/arch/i386/conf/INSTALL_TINY: revision 1.135
sys/arch/evbppc/conf/VIRTEX_GSRD1: revision 1.15
sys/arch/evbarm/conf/TS7200: revision 1.49
sys/arch/hpcmips/conf/VR41XX: revision 1.55
sys/arch/hp700/conf/GENERIC: revision 1.115
sys/arch/cats/conf/GENERIC: revision 1.140
Mention wsconscfg(8) needs WSDISPLAY_COMPAT_USL
If a port is going to have wscons for virtual terminals then it really make=
s
sense to enable WSDISPLAY_COMPAT_USL so the system can switch between the
virtual terminals...
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.
1.348.2.1 Mon Apr 23 16:31:37 UTC 2012 riz Pull up following revision(s) (requested by bouyer in ticket #193):
sys/arch/i386/conf/GENERIC: revision 1.1072
sys/dev/pci/mpii.c: revision 1.1
sys/arch/i386/conf/XEN3_DOM0: revision 1.66
sys/dev/pci/files.pci: revision 1.357
share/man/man4/Makefile: revision 1.584
distrib/sets/lists/man/mi: revision 1.1387
share/man/man4/mpii.4: revision 1.1
sys/arch/amd64/conf/GENERIC: revision 1.354
sys/arch/amd64/conf/XEN3_DOM0: revision 1.83
sys/arch/i386/conf/ALL: revision 1.337
Add mpii(4), a driver for LSI Logic Fusion-MPT Message Passing Interface II
SAS controllers. Ported from OpenBSD.
  /src/sys/dev/ata/
wd.c 1.348 Wed Oct 31 09:51:20 UTC 2007 jnemeth branches: 1.348.2;
PR/37251 - Brian Buhrow -- FORCE_LBA48 on seagate drives larger then 1TB
Wed Oct 31 09:51:20 UTC 2007 jnemeth branches: 1.348.2;
PR/37251 - Brian Buhrow -- FORCE_LBA48 on seagate drives larger then 1TB
1.348.2.3 Mon Feb 18 21:05:36 UTC 2008 mjf Sync with HEAD.
1.348.2.2 Thu Dec 27 00:44:56 UTC 2007 mjf Sync with HEAD.
1.348.2.1 Mon Nov 19 00:47:43 UTC 2007 mjf Sync with HEAD.
  /src/
build.sh 1.348 Fri May 14 22:06:34 UTC 2021 christos ignore cvslatest errors in expert mode
1.316.4.3 Wed Sep 15 05:07:42 UTC 2021 msaitoh Pull up following revision(s) (requested by martin in ticket #1695):
build.sh: revision 1.348
build.sh: revision 1.349
build.sh: revision 1.350
build.sh: revision 1.351
build.sh: revision 1.352
build.sh: revision 1.356
ignore cvslatest errors in expert mode
Handle git and mercurial for reproducible builds.
for mercurial, use the latest revision instead of limiting the output to 1
(requested by joerg)
handle different flavors of date(1)
kre@ does not like the subshell :-)
Add a new operation "mkrepro-timestamp" to extract the timestamp a
build with -P would use. Example usage:
./build.sh -T /usr/tools -P mkrepro-timestamp
This allows us to extract this information once, make other use of it,
and replicate it on other machines with -V MKREPRO=yes -V MKREPRO_TIMESTAMP=..
1.333.2.1 Tue Sep 14 02:21:34 UTC 2021 msaitoh Pull up following revision(s) (requested by martin in ticket #1345):
build.sh: revision 1.348
build.sh: revision 1.349
build.sh: revision 1.350
build.sh: revision 1.351
build.sh: revision 1.352
build.sh: revision 1.356
ignore cvslatest errors in expert mode
Handle git and mercurial for reproducible builds.
for mercurial, use the latest revision instead of limiting the output to 1
(requested by joerg)
handle different flavors of date(1)
kre@ does not like the subshell :-)
Add a new operation "mkrepro-timestamp" to extract the timestamp a
build with -P would use. Example usage:
./build.sh -T /usr/tools -P mkrepro-timestamp
This allows us to extract this information once, make other use of it,
and replicate it on other machines with -V MKREPRO=yes -V MKREPRO_TIMESTAMP=..
  /src/sys/arch/i386/conf/
files.i386 1.348 Thu Apr 16 15:34:23 UTC 2009 rmind - Add macros to handle (some) trapframe registers for common x86 code.
- Merge i386 and amd64 syscall.c into x86. No functional changes intended.

Proposed on (port-i386 & port-amd64). Unfortunately, I cannot merge these
lists into the single port-x86. :(
1.338.6.5 Sun Jun 23 11:09:54 UTC 2013 bouyer Pull up following revision(s) (requested by mbalmer in ticket #1863):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/gpio.4: revision 1.24
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
share/man/man4/Makefile: revision 1.593
share/man/man4/ptcd.4: revision 1.1, 1.3, 1.4
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
Mention ptcd(4) in the synopsis.
1.362.6.1 Thu Apr 16 07:01:38 UTC 2015 snj Pull up following revision(s) (requested by mbalmer in ticket #891):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/Makefile: revision 1.593
share/man/man4/gpio.4: revision 1.24
share/man/man4/ptcd.4: revision 1.1-1.4
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
--
Mention ptcd(4) in the synopsis.
--
Add ptcd(4).
--
Mention ibmcd(4).
--
Sort sections.
--
Sort SEE ALSO.
ALL 1.348 Sun Dec 16 18:52:17 UTC 2012 mbalmer Add ptcd(4).
1.183.4.11 Sun Jun 23 11:09:54 UTC 2013 bouyer Pull up following revision(s) (requested by mbalmer in ticket #1863):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/gpio.4: revision 1.24
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
share/man/man4/Makefile: revision 1.593
share/man/man4/ptcd.4: revision 1.1, 1.3, 1.4
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
Mention ptcd(4) in the synopsis.
1.332.2.5 Thu Apr 16 07:01:38 UTC 2015 snj Pull up following revision(s) (requested by mbalmer in ticket #891):
distrib/sets/lists/man/mi: revision 1.1411
share/man/man4/Makefile: revision 1.593
share/man/man4/gpio.4: revision 1.24
share/man/man4/ptcd.4: revision 1.1-1.4
sys/arch/i386/conf/ALL: revision 1.348
sys/arch/i386/conf/files.i386: revision 1.369
sys/dev/isa/ptcd.c: revision 1.1
ptcd(4) is a device driver for the cash drawer port found on Protech PS3100
point of sale terminals. It controls the cash drawer using a gpio(4) device
that attaches at ptcd0: Pin 0 controls the drawer, pin 1 reports the current
state. For details read the manual page.
--
Mention ptcd(4) in the synopsis.
--
Add ptcd(4).
--
Mention ibmcd(4).
--
Sort sections.
--
Sort SEE ALSO.
  /src/doc/
BRANCHES 1.348 Mon Jan 28 00:43:54 UTC 2019 jdolecek remove obsolete part of description for kqueue
  /src/sys/dev/pci/
if_wmvar.h 1.12.10.7 Fri May 06 18:43:34 UTC 2016 snj Pull up following revision(s) (requested by msaitoh in ticket #1366):
sys/dev/pci/if_wm.c: 1.281, 1.318, 1.320, 1.324-1.332, 1.334, 1.336, 1.343-1.344, 1.347-1.348, 1.350, 1.376-1.382, 1.386-1.387, 1.389 via patch
sys/dev/pci/if_wmreg.h: 1.68-1.70, 1.73-1.77, 1.79-1.80, 1.82, 1.86-1.88 via patch
sys/dev/pci/if_wmvar.h: 1.22-1.23, 1.25-1.30 via patch
sys/dev/mii/igphy.c: 1.25
sys/dev/mii/ukphy.c: 1.48
Sync wm(4) as of if_wm.c rev 1.389 except SERDES, MSI/MSI-X, multiqueue
and NET_MPSAFE:
- Set ICH9 and ICH10's PBA size to 14K if the RX buffer size is more
than 4096. Almost the same as other OSes.
- For 82576 and newer devices, the PBA register is deleted. Don't write
PBA for those chips. Also change the calculation of RX packet buffer
size in new way.
- Print NVM image version and option ROM version.
- Add workaround for I210 Errata 25 and I211 Errata 10 (PLL bug). This
workaround is required if the NVM image version < 3.25.
- Fix a bug that wm_detach() didn't unmap the FHASH's area. Now
"drvctl -d wm0" -> "drvctl -r pci0" works on ICH* and PCH*.
- Add workaround for 82574 Errata 25 and 82583 Errata 12 "Dropped RX
packets" and for 82573 (unknown). Set GCR_L1_ACT_WITHOUT_L0S_RX bit.
The NVM Image version 2.1.4 and newer have this workaround.
- Check PHY type correctly. This change is required to use igphy(4)
device correctly.
- Disable LPLU (Low Power Link Up) on D0 state on 82574, 82583 and ICH*
too.
- Call wm_get_hw_control() correctly. This change fixes a bug that some
AMT based systems doesn't linkup at 1000BaseT. The problem was
observed on HP Compaq dc7700. A lot of fixes have been done for wm(4)
and igphy(4), so now PR#44893 should be fixed.
- Call wm_get_wakeup(sc) before checking WM_F_HAS_AMT. It's required to
check the existence of AMT correctly.
- Fix a problem that wm_gate_hw_phy_config_ich8lan() isn't called in
wm_reset() on PCH2.
- Clear WMREG_WUC in wm_reset() if the chip >= 82544. This might fix
the behavior on suspend/resume.
- Fix logic of wm_check_reset_block() on ICH* and PCH*. This change
might fix a problem that PHY's read/write functions can't get
semaphore.
- On ICH8, call wm_gig_downshift_workaround_ich8lan() when link changed
down.
- Drop PHY_CTRL_GBE_DIS explicitly in wm_lplu_d0_disable() in case BIOS
sets this bit.
- Fix two bugs in wm_kmrn_lock_loss_workaround_ich8lan(). Now the
function checks the status correctly but it causes linkdown up to 10
times, so it's disabled for the time being.
- PR/50527: David Binderman: Fix impossible code. Odd offsets need
special treatment.
- Fix RAL table's size of PCH2 and PCH_LPT.
- PCH_LPT (and newer device) is required to check FWSM_WLOCK_MAC bit to
determine the range of the RAL.
- Use sc->sc_itr instead of hard-coded number.
- Rename wm_tbi_check_link() to wm_tbi_tick() because this function
acts as mii_tick().
- ACK Accelerate Disable in the RFCTL register is not bit 13 but 12.
No binary change because this definition has not used yet.
- Add ACK data Disable bit's definition (not used yet).
- PHY_CTRL_GBE_DIS is not bit 4 but bit 6. This change has no any
effect by default because WM_WOL is not defined yet and
m_kmrn_lock_loss_workaround_ich8lan() is broken.
- Fix wm_check_mng_mode_ich8lan(). This function is used only when
WM_WOL is defined and it's disabled by default.
- Rename wm_check_reset_block() to wm_phy_resetisblocked() and make it
returns bool. No functional change.
- Reorder function definitions and macro definitions. No functional
change.
- Fix comment. Add comment. Update comment.
- KNF.
1.19.2.4 Fri Feb 26 22:08:17 UTC 2016 snj branches: 1.19.2.4.2;
Pull up following revision(s) (requested by msaitoh in ticket #1102):
sys/dev/mii/igphy.c: 1.25
sys/dev/mii/ukphy.c: 1.48
sys/dev/pci/if_wm.c: revisions 1.308, 1.318, 1.320, 1.324-1.332, 1.334, 1.336, 1.343-1.344, 1.347-1.348, 1.350, 1.376-1.382, 1.386-1.389 via patch
sys/dev/pci/if_wmreg.h: revisions 1.68-1.70, 1.73-1.77, 1.79-1.80, 1.82, 1.86-1.88 via patch
sys/dev/pci/if_wmvar.h: revisions 1.22-1.23, 1.25-1.30 via patch
Sync wm(4) as of if_wm.c rev 1.389 except MSI/MSI-X, multiqueue and NET_MPSAFE:
- Add C2000 KX and 2.5G support.
- Set ICH9 and ICH10's PBA size to 14K if the RX buffer size is more than
4096. Almost the same as other OSes.
- For 82576 and newer devices, the PBA register is deleted. Don't write PBA
for those chips. Also change the calculation of RX packet buffer size in
new way.
- Fix a lot of bugs to make 82575 and newer SERDES based systems work.
- Print NVM image version and option ROM version.
- Add workaround for I210 Errata 25 and I211 Errata 10 (PLL bug). This
workaround is required if the NVM image version < 3.25.
- Fix a bug that wm_detach() didn't unmap the FHASH's area. Now
"drvct -d wm0" -> "drvctl -r pci0" works on ICH* and PCH*.
- Add workaround for 82574 Errata 25 and 82583 Errata 12 "Dropped RX packets"
and for 82573 (unknown). Set GCR_L1_ACT_WITHOUT_L0S_RX bit. The NVM Image
version 2.1.4 and newer have this workaround.
- Check PHY type correctly. This change is required to use igphy(4) device
correctly.
- Disable LPLU (Low Power Link Up) on D0 state on 82574, 82583 and ICH* too.
- Call wm_get_hw_control() correctly. This change fixes a bug that some AMT
based systems doesn't linkup at 1000BaseT. The problem was observed on HP
Compaq dc7700. A lot of fixes have been done for wm(4) and igphy(4), so now
PR#44893 should be fixed.
- Call wm_get_wakeup(sc) before checking WM_F_HAS_AMT. It's required to
check the existence of AMT correctly.
- Fix a problem that wm_gate_hw_phy_config_ich8lan() isn't called in
wm_reset() on PCH2.
- Clear WMREG_WUC in wm_reset() if the chip >= 82544. This might fix the
behavior on suspend/resume.
- Fix logic of wm_check_reset_block() on ICH* and PCH*. This change might fix
a problem that PHY's read/write functions can't get semaphore.
- On ICH8, call wm_gig_downshift_workaround_ich8lan() when link changed down.
- Drop PHY_CTRL_GBE_DIS explicitly in wm_lplu_d0_disable() in case BIOS sets
this bit.
- Fix two bugs in wm_kmrn_lock_loss_workaround_ich8lan(). Now the function
checks the status correctly but it causes linkdown up to 10 times, so it's
disabled for the time being.
- PR/50527: David Binderman: Fix impossible code. Odd offsets need special
treatment.
- Fix RAL table's size of PCH2 and PCH_LPT.
- PCH_LPT (and newer device) is required to check FWSM_WLOCK_MAC bit to
determine the range of the RAL.
- Use sc->sc_itr instead of hard-coded number.
- Rename wm_tbi_check_link() to wm_tbi_tick() because this function acts as
mii_tick().
- ACK Accelerate Disable in the RFCTL register is not bit 13 but 12.
No binary change because this definition has not used yet.
- Add ACK data Disable bit's definition (not used yet).
- PHY_CTRL_GBE_DIS is not bit 4 but bit 6. This change has no any effect by
default because WM_WOL is not defined yet and
m_kmrn_lock_loss_workaround_ich8lan() is broken.
- Fix wm_check_mng_mode_ich8lan(). This function is used only when WM_WOL is
defined and it's disabled by default.
- Rename wm_check_reset_block() to wm_phy_resetisblocked() and make it returns
bool. No functional change.
- Reorder function definitions and macro definitions. No functional change.
- Fix comment. Add comment. Update comment.
- KNF.

Completed in 505 milliseconds

1 2 3 4 5 6 7 8 91011>>