HomeSort by: relevance | last modified time | path
    Searched hist:1.655 (Results 1 - 25 of 30) sorted by relevancy

1 2

  /src/sys/dev/mii/
makphyreg.h 1.6.20.3 Wed Aug 05 17:22:46 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #1594:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660,
1.662, 1.664-1.668,
1.671-1.674, 1.678,
1.680-1.685 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119 via patch
sys/dev/pci/if_wmvar.c 1.45 via patch
sys/dev/mii/igphy.c 1.35-1.36 via patch
sys/dev/mii/igphyreg.h 1.12-1.13
sys/dev/mii/makphy.c 1.66 via patch
sys/dev/mii/makphyreg.h 1.11

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.
igphyreg.h 1.10.8.1 Wed Aug 05 17:22:46 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #1594:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660,
1.662, 1.664-1.668,
1.671-1.674, 1.678,
1.680-1.685 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119 via patch
sys/dev/pci/if_wmvar.c 1.45 via patch
sys/dev/mii/igphy.c 1.35-1.36 via patch
sys/dev/mii/igphyreg.h 1.12-1.13
sys/dev/mii/makphy.c 1.66 via patch
sys/dev/mii/makphyreg.h 1.11

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.
igphy.c 1.26.10.2 Wed Aug 05 17:22:46 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #1594:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660,
1.662, 1.664-1.668,
1.671-1.674, 1.678,
1.680-1.685 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119 via patch
sys/dev/pci/if_wmvar.c 1.45 via patch
sys/dev/mii/igphy.c 1.35-1.36 via patch
sys/dev/mii/igphyreg.h 1.12-1.13
sys/dev/mii/makphy.c 1.66 via patch
sys/dev/mii/makphyreg.h 1.11

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.
makphy.c 1.42.8.5 Wed Aug 05 17:22:46 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #1594:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660,
1.662, 1.664-1.668,
1.671-1.674, 1.678,
1.680-1.685 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119 via patch
sys/dev/pci/if_wmvar.c 1.45 via patch
sys/dev/mii/igphy.c 1.35-1.36 via patch
sys/dev/mii/igphyreg.h 1.12-1.13
sys/dev/mii/makphy.c 1.66 via patch
sys/dev/mii/makphyreg.h 1.11

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.
  /src/sys/dev/pci/
if_wmvar.h 1.33.6.6 Wed Aug 05 17:22:46 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #1594:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660,
1.662, 1.664-1.668,
1.671-1.674, 1.678,
1.680-1.685 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119 via patch
sys/dev/pci/if_wmvar.c 1.45 via patch
sys/dev/mii/igphy.c 1.35-1.36 via patch
sys/dev/mii/igphyreg.h 1.12-1.13
sys/dev/mii/makphy.c 1.66 via patch
sys/dev/mii/makphyreg.h 1.11

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.
1.44.4.1 Fri Jul 10 10:45:56 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #994:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660, 1.662, 1.664-1.668,
1.671-1.674, 1.678,1.680-1.681 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119
sys/dev/pci/if_wmvar.c 1.45

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler.
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Rename some macros and function.
- KNF. Add comment.
if_wmreg.h 1.98.6.12 Wed Aug 05 17:22:46 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #1594:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660,
1.662, 1.664-1.668,
1.671-1.674, 1.678,
1.680-1.685 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119 via patch
sys/dev/pci/if_wmvar.c 1.45 via patch
sys/dev/mii/igphy.c 1.35-1.36 via patch
sys/dev/mii/igphyreg.h 1.12-1.13
sys/dev/mii/makphy.c 1.66 via patch
sys/dev/mii/makphyreg.h 1.11

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.
1.115.2.2 Fri Jul 10 10:45:56 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #994:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660, 1.662, 1.664-1.668,
1.671-1.674, 1.678,1.680-1.681 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119
sys/dev/pci/if_wmvar.c 1.45

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler.
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Rename some macros and function.
- KNF. Add comment.
if_wm.c 1.655 Wed Dec 11 10:28:19 UTC 2019 msaitoh Add SFP support part 1. The code for SerDes and SGMII setting is not include
in this commit. SFP module removal interrupt detects but not used yet:
- Detect SFP's 1000BASE-SX, 1000BASE-LX, 100BASE-FX and 1000BASE-T correctly.
- Detect the Media Auto Sense feature. Not supported yet.
- Add comment.
1.508.4.39 Wed Aug 05 17:22:45 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #1594:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660,
1.662, 1.664-1.668,
1.671-1.674, 1.678,
1.680-1.685 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119 via patch
sys/dev/pci/if_wmvar.c 1.45 via patch
sys/dev/mii/igphy.c 1.35-1.36 via patch
sys/dev/mii/igphyreg.h 1.12-1.13
sys/dev/mii/makphy.c 1.66 via patch
sys/dev/mii/makphyreg.h 1.11

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.
1.645.2.5 Fri Jul 10 10:45:56 UTC 2020 martin Pull up the following revisions, requested by msaitoh in ticket #994:

sys/dev/pci/if_wm.c 1.655-1.658, 1.660, 1.662, 1.664-1.668,
1.671-1.674, 1.678,1.680-1.681 via patch
sys/dev/pci/if_wmreg.c 1.118-1.119
sys/dev/pci/if_wmvar.c 1.45

- Add SFP support. Module insertion/removal is not supported yet.
Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler.
Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
The default value of hw.wm*.txrx_workqueue is 0 which use softint
as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
fragmented UDP, first packet and second packet should be processed
in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
in case it's already set.
- Actually writing always the checksum offload context descriptor
makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Rename some macros and function.
- KNF. Add comment.
pcidevs.h 1.655 Tue Oct 05 11:58:17 UTC 2004 augustss Regen.
pcidevs_data.h 1.655 Wed Oct 13 14:14:42 UTC 2004 drochner regen
pcidevs 1.655 Wed Oct 13 14:14:19 UTC 2004 drochner recognize ADDI-DATA APCI-7800 8-port serial adapter
  /src/sys/arch/i386/i386/
machdep.c 1.655 Tue Jan 27 16:13:13 UTC 2009 christos Attempt to force resets using two more methods:
1. Reset Control register at I/O port 0xcf9
2. Fast A20 and Init register at I/O port 0x92

Requested by ad@
1.644.4.3 Mon Feb 02 21:24:31 UTC 2009 snj Pull up following revision(s) (requested by ad in ticket #396):
sys/arch/i386/i386/machdep.c: revision 1.655
Attempt to force resets using two more methods:
1. Reset Control register at I/O port 0xcf9
2. Fast A20 and Init register at I/O port 0x92
Requested by ad@
  /src/sys/dev/usb/
usbdevs.h 1.655 Mon Jan 13 08:24:17 UTC 2014 reinoud Regen
usbdevs_data.h 1.655 Mon Jan 13 08:22:07 UTC 2014 reinoud Regen
usbdevs 1.655 Sat Oct 05 22:00:28 UTC 2013 jnemeth add Keyspan USA-19H serial adapter
  /src/usr.bin/xlint/lint1/
tree.c 1.655 Fri Oct 11 20:45:15 UTC 2024 rillig lint: sort integer constraint functions and branches

No functional change.
  /src/usr.bin/make/
parse.c 1.655 Sat Jan 22 18:59:23 UTC 2022 rillig make: add missing newline after "cannot continue" message

It was wrong of Parse_File to output an unfinished line and hope for
some other code to finish it. As demonstrated in the test, PrintOnError
did not do that in the case of additional debug output.

To keep the overall behavior as close as possible to before, the other
callers of PrintOnError now have to pass the newline themselves. Passing
strings that start with newlines but don't end with them looked
suspicious anyway.
main.c 1.655 Wed May 28 20:18:45 UTC 2025 sjg make: delay warning about bogus -J flag

In MainParseArgJobsInternal just set bogusJflag to indicate
that the descriptors passed were invalid.

By the time we get to InitMaxJobs the command line and indeed
the makefile have had a chance to put us in compat mode,
in which case the warning is unnecessary.
Add suggestion of -B if compat mode is desired in the sub-make.

Reviewed by: rillig
var.c 1.655 Wed Nov 04 03:37:51 UTC 2020 rillig make(1): rename oldVars to discardUndefined

While here, moved all the documentation about this variable into a
single place.
  /src/share/man/man4/
Makefile 1.655 Sun May 27 05:31:20 UTC 2018 thorpej Add a driver for the Taos TSL256x light sensors.
  /src/sys/sys/
param.h 1.655 Thu Mar 26 19:47:23 UTC 2020 ad NetBSD 9.99.52 - sleepq_t & kcondvar_t shrunk
  /src/sys/arch/i386/conf/
GENERIC 1.655 Fri Feb 11 08:25:54 UTC 2005 dsl Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.
  /src/sys/conf/
files 1.655 Sat Feb 14 14:33:29 UTC 2004 bjh21 Add a new MI attribute, pckbc_machdep_cnattach, and change pckbc_cnattach()
to only call pckbc_machdep_cnattach() if this is present. This allows
pckbc_machdep_cnattach() to be omitted entirely on most ports, where it only
returns ENXIO anyway.

The devices with this attribute at the moment are pc(4) on i386 and bebox, and
pckbc on sparc, where pckbc_machdep_cnattach() mysteriously returns 0 rather
than ENXIO.
  /src/doc/
CHANGES 1.655 Thu Jul 20 01:01:18 UTC 2006 rpaulo Mention postfix 2.3.0 update.
  /src/distrib/sets/lists/tests/
mi 1.655 Fri Dec 04 17:19:33 UTC 2015 christos Add gpt tests
  /src/share/mk/
bsd.own.mk 1.655 Sun Apr 10 21:03:17 UTC 2011 joerg Use ?: operator to determine when to add --sysroot. Unbreaks clang
bootstrap.

Completed in 1308 milliseconds

1 2