Searched hist:ff (Results 1 - 25 of 34) sorted by relevance

12

/src/sys/dev/wscons/
H A Dascii.h1.3 Sat Jun 20 19:11:04 GMT 1998 drochner add some more ASCII definitions, move NP->FF for consistency
H A Dunicode.h1.1 Sat Feb 20 18:20:02 GMT 1999 drochner branches: 1.1.20; 1.1.22;
complete the font tables for the DEC special fonts; assign some codes
from the private Unicode area (0xe000 ff.) to stuff I didn't find in
the Unicode database
H A Dwsemul_vt100_chars.c1.4 Sat Feb 20 18:20:02 GMT 1999 drochner branches: 1.4.8;
complete the font tables for the DEC special fonts; assign some codes
from the private Unicode area (0xe000 ff.) to stuff I didn't find in
the Unicode database
H A Dwsemul_dumb.c1.4 Sat Jun 20 19:11:04 GMT 1998 drochner add some more ASCII definitions, move NP->FF for consistency
H A Dwsemul_sun.c1.7 Sat Jun 20 19:11:05 GMT 1998 drochner add some more ASCII definitions, move NP->FF for consistency
/src/share/misc/
H A Dascii1.3 Thu Feb 08 02:51:57 GMT 2018 pgoyette While here, also update 014 - it's name is "ff" ("form feed"), and not
"np" ("new page").
/src/distrib/luna68k/liveimage/
H A Ddiskproto.in1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
H A Dfstab.in1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
H A Dspec.boot.in1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui branches: 1.1.2;
distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui branches: 1.1.2;
distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui branches: 1.1.2;
distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui branches: 1.1.2;
distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
H A Dspec.in1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
H A DMakefile1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.1 Sun Jan 18 00:12:11 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
/src/distrib/luna68k/
H A DMakefile1.3 Sun Jan 18 00:12:10 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.3 Sun Jan 18 00:12:10 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.3 Sun Jan 18 00:12:10 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
1.3 Sun Jan 18 00:12:10 GMT 2026 tsutsui distrib/luna68k: add "build.sh live-image" support for luna68k

Using recently added "USE_MDBOOTPART" in Makefile.bootimage with MD rules.
A generated live-image is confirmed working on nono 1.6.4 with LUNA's ROM:
---
% nono-cli -V vmtype=luna -V prom-image=LUNAROM.DAT -V dipsw-autoboot=no -V dipsw-serial=yes -V hostcom-driver=stdio -V spc0-id6-image=hd,NetBSD-11.99.5-luna68k-live.img -V spc0-id6-writeignore=1
(PROM) Unknown PROM version
(SCSIHD6) write is ignored
Diagnostic Start.... 11.549'836'096 805b XP(HD647180) WriteInternalIO 53H(DERA) <- $07 (NOT IMPLEMENTED)
11.549'839'519 8060 XP(HD647180) WriteInternalIO 60H(IODRA) <- $50 (NOT IMPLEMENTED)
11.549'842'942 8065 XP(HD647180) WriteInternalIO 70H(DDRA) <- $70 (NOT IMPLEMENTED)
11.650'402'532 8528 XP(HD647180) WriteInternalIO 60H(IODRA) <- $20 (NOT IMPLEMENTED)
11.653'401'080 8bd1 XP(HD647180) ReadInternalIO 48H(T2CSR1) -> $ff (NOT IMPLEMENTED)
11.653'404'340 8bd6 XP(HD647180) WriteInternalIO 48H(T2CSR1) <- $ff (NOT IMPLEMENTED)
11.653'406'785 8bd9 XP(HD647180) ReadInternalIO 49H(T2CSR2) -> $ff (NOT IMPLEMENTED)
11.653'410'045 8bde XP(HD647180) WriteInternalIO 49H(T2CSR2) <- $ff (NOT IMPLEMENTED)
No problems in hardware
OMRON WS Monitor Ver4.25 (Thu May 16 11:54:02 1991) - 0x01000000 bytes of memory
"BSD Monitor-mode"
>k
ctlr: dk
drv: 0
par: c d
fnam: vmunix boot
>g
SPC RESET CONDITION !!
>x

>> NetBSD/luna68k boot, Revision 1.12 (Sat Jan 17 07:19:27 UTC 2026)
>> (based on Stinger ver 0.0 [Phase-31])

Machine model = LUNA-I
Physical Memory = 0x1000000 (16 MB)

sc0 at 0xe1000000: async, parity, ID 7
ID 6: NONO SCSIHD rev 0, 512 bytes/sect x 3145728 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:02:4d:36

Press return to boot now, any other key for boot menu
booting sd(6,0)netbsd - starting in 0 seconds.
type "help" for help.
boot> boot -s
Booting sd(6,0)netbsd (howto 0x2)
2358892+97604 [336560+209989]=0x2dd6c8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 11.99.5 (GENERIC) #0: Sat Jan 17 16:26:14 JST 2026
[ 1.0000000] tsutsui@proslim:/home/tsutsui/obj.luna68k/sys/arch/luna68k/compile/GENERIC
[ 1.0000000] LUNA-I (MC68030 CPU+MMU, MC68881 FPU)
:
/src/sys/dev/ic/
H A Di82365reg.h1.7 Sun Nov 24 02:46:55 GMT 2002 takemura branches: 1.7.6;
3.3V support for Ricoh 5C[23]96 parts from ngc@ff.iij4u.or.jp.
Preliminary bridge identification code from imp@village.org.
H A Datw.c1.43 Thu Jul 15 06:30:12 GMT 2004 dyoung During scans, initialize the BSSID to ff:ff:ff:ff:ff:ff before
sending the first probe request.
1.43 Thu Jul 15 06:30:12 GMT 2004 dyoung During scans, initialize the BSSID to ff:ff:ff:ff:ff:ff before
sending the first probe request.
1.43 Thu Jul 15 06:30:12 GMT 2004 dyoung During scans, initialize the BSSID to ff:ff:ff:ff:ff:ff before
sending the first probe request.
1.43 Thu Jul 15 06:30:12 GMT 2004 dyoung During scans, initialize the BSSID to ff:ff:ff:ff:ff:ff before
sending the first probe request.
1.43 Thu Jul 15 06:30:12 GMT 2004 dyoung During scans, initialize the BSSID to ff:ff:ff:ff:ff:ff before
sending the first probe request.
1.43 Thu Jul 15 06:30:12 GMT 2004 dyoung During scans, initialize the BSSID to ff:ff:ff:ff:ff:ff before
sending the first probe request.
H A Di82365var.h1.17 Sun Nov 24 02:46:55 GMT 2002 takemura branches: 1.17.6;
3.3V support for Ricoh 5C[23]96 parts from ngc@ff.iij4u.or.jp.
Preliminary bridge identification code from imp@village.org.
/src/share/man/man7/
H A Dascii.71.11 Thu Feb 08 02:51:57 GMT 2018 pgoyette While here, also update 014 - it's name is "ff" ("form feed"), and not
"np" ("new page").
/src/sbin/route/
H A Dextern.h1.6 Mon Aug 15 19:28:08 GMT 2005 ginsbach Make sure that a netmask socket address value prints appropriately when the
family is unset. Either the destination or interface address socket address
family value is used. This change prevents the following sort of output:

RTM_NEWADDR: address being added to iface: len 60, metric 0, flags:<UP>
sockaddrs: <NETMASK,IFA,BRD>
(0) 00.00.ff.00.00 127.0.0.1 127.0.0.1

With this change the last line becomes:

255.0.0.0 127.0.0.1 127.0.0.1

Also make sure that when using a generated inet netmask the address family
is set. With this change a generated netmask will print appropriately
when using the verbose (-v) option.
/src/usr.bin/passwd/
H A Dlocal_passwd.c1.27 Sat Oct 30 21:05:53 GMT 2004 dsl Add (unsigned char) cast to ctype functions
A password containg 80...ff could be reported (incorrectly) as being
all lower case.
H A Dyp_passwd.c1.28 Sat Oct 30 21:05:53 GMT 2004 dsl Add (unsigned char) cast to ctype functions
A password containg 80...ff could be reported (incorrectly) as being
all lower case.
/src/sys/kern/
H A Dkern_descrip.c1.253 Thu Feb 23 02:58:40 GMT 2023 riastradh kern_descrip.c: Use atomic_store_relaxed/release for ff->ff_file.

1. atomic_store_relaxed in fd_close avoids the appearance of race in
sanitizers (minor bug).

2. atomic_store_release in fd_affix is necessary because the lock
activity was not, in fact, enough to guarantee ordering (real bug
some architectures like aarch64).

The premise appears to have been that the mutex_enter/exit earlier
in fd_affix is enough to guarantee that initialization of fp (A)
happens before use of fp by a user once fp is published (B):

fp->f_... = ...; // A

/* fd_affix */
mutex_enter(&fp->f_lock);
fp->f_count++;
mutex_exit(&fp->f_lock);
...
ff->ff_file = fp; // B

But actually mutex_enter/exit allow the following reordering by
the CPU:

mutex_enter(&fp->f_lock);
ff->ff_file = fp; // B
fp->f_count++;
fp->f_... = ...; // A
mutex_exit(&fp->f_lock);

The only constraints they imply are:

1. fp->f_count++ and B cannot precede mutex_enter
2. mutex_exit cannot precede A and fp->f_count++

They imply no constraint on the relative ordering of A, B, and
fp->f_count++ amongst each other, however.

This affects any architecture that has a native load-acquire or
store-release operation in mutex_enter/exit, like aarch64, instead
of explicit load-before-load/store and load/store-before-store
barrier.

No need for atomic_store_* in fd_copy or fd_free because we have
exclusive access to ff as is.

XXX pullup-9
XXX pullup-10
1.253 Thu Feb 23 02:58:40 GMT 2023 riastradh kern_descrip.c: Use atomic_store_relaxed/release for ff->ff_file.

1. atomic_store_relaxed in fd_close avoids the appearance of race in
sanitizers (minor bug).

2. atomic_store_release in fd_affix is necessary because the lock
activity was not, in fact, enough to guarantee ordering (real bug
some architectures like aarch64).

The premise appears to have been that the mutex_enter/exit earlier
in fd_affix is enough to guarantee that initialization of fp (A)
happens before use of fp by a user once fp is published (B):

fp->f_... = ...; // A

/* fd_affix */
mutex_enter(&fp->f_lock);
fp->f_count++;
mutex_exit(&fp->f_lock);
...
ff->ff_file = fp; // B

But actually mutex_enter/exit allow the following reordering by
the CPU:

mutex_enter(&fp->f_lock);
ff->ff_file = fp; // B
fp->f_count++;
fp->f_... = ...; // A
mutex_exit(&fp->f_lock);

The only constraints they imply are:

1. fp->f_count++ and B cannot precede mutex_enter
2. mutex_exit cannot precede A and fp->f_count++

They imply no constraint on the relative ordering of A, B, and
fp->f_count++ amongst each other, however.

This affects any architecture that has a native load-acquire or
store-release operation in mutex_enter/exit, like aarch64, instead
of explicit load-before-load/store and load/store-before-store
barrier.

No need for atomic_store_* in fd_copy or fd_free because we have
exclusive access to ff as is.

XXX pullup-9
XXX pullup-10
1.253 Thu Feb 23 02:58:40 GMT 2023 riastradh kern_descrip.c: Use atomic_store_relaxed/release for ff->ff_file.

1. atomic_store_relaxed in fd_close avoids the appearance of race in
sanitizers (minor bug).

2. atomic_store_release in fd_affix is necessary because the lock
activity was not, in fact, enough to guarantee ordering (real bug
some architectures like aarch64).

The premise appears to have been that the mutex_enter/exit earlier
in fd_affix is enough to guarantee that initialization of fp (A)
happens before use of fp by a user once fp is published (B):

fp->f_... = ...; // A

/* fd_affix */
mutex_enter(&fp->f_lock);
fp->f_count++;
mutex_exit(&fp->f_lock);
...
ff->ff_file = fp; // B

But actually mutex_enter/exit allow the following reordering by
the CPU:

mutex_enter(&fp->f_lock);
ff->ff_file = fp; // B
fp->f_count++;
fp->f_... = ...; // A
mutex_exit(&fp->f_lock);

The only constraints they imply are:

1. fp->f_count++ and B cannot precede mutex_enter
2. mutex_exit cannot precede A and fp->f_count++

They imply no constraint on the relative ordering of A, B, and
fp->f_count++ amongst each other, however.

This affects any architecture that has a native load-acquire or
store-release operation in mutex_enter/exit, like aarch64, instead
of explicit load-before-load/store and load/store-before-store
barrier.

No need for atomic_store_* in fd_copy or fd_free because we have
exclusive access to ff as is.

XXX pullup-9
XXX pullup-10
1.253 Thu Feb 23 02:58:40 GMT 2023 riastradh kern_descrip.c: Use atomic_store_relaxed/release for ff->ff_file.

1. atomic_store_relaxed in fd_close avoids the appearance of race in
sanitizers (minor bug).

2. atomic_store_release in fd_affix is necessary because the lock
activity was not, in fact, enough to guarantee ordering (real bug
some architectures like aarch64).

The premise appears to have been that the mutex_enter/exit earlier
in fd_affix is enough to guarantee that initialization of fp (A)
happens before use of fp by a user once fp is published (B):

fp->f_... = ...; // A

/* fd_affix */
mutex_enter(&fp->f_lock);
fp->f_count++;
mutex_exit(&fp->f_lock);
...
ff->ff_file = fp; // B

But actually mutex_enter/exit allow the following reordering by
the CPU:

mutex_enter(&fp->f_lock);
ff->ff_file = fp; // B
fp->f_count++;
fp->f_... = ...; // A
mutex_exit(&fp->f_lock);

The only constraints they imply are:

1. fp->f_count++ and B cannot precede mutex_enter
2. mutex_exit cannot precede A and fp->f_count++

They imply no constraint on the relative ordering of A, B, and
fp->f_count++ amongst each other, however.

This affects any architecture that has a native load-acquire or
store-release operation in mutex_enter/exit, like aarch64, instead
of explicit load-before-load/store and load/store-before-store
barrier.

No need for atomic_store_* in fd_copy or fd_free because we have
exclusive access to ff as is.

XXX pullup-9
XXX pullup-10
1.252 Thu Feb 23 02:58:28 GMT 2023 riastradh kern_descrip.c: Fix membars around reference count decrement.

In general, the `last one out hit the lights' style of reference
counting (as opposed to the `whoever's destroying must wait for
pending users to finish' style) requires memory barriers like so:

... usage of resources associated with object ...
membar_release();
if (atomic_dec_uint_nv(&obj->refcnt) != 0)
return;
membar_acquire();
... freeing of resources associated with object ...

This way, all usage happens-before all freeing. This fixes several
errors:

- fd_close failed to ensure whatever its caller did would
happen-before the freeing, in the case where another thread is
concurrently trying to close the fd (ff->ff_file == NULL).

Fix: Add membar_release before atomic_dec_uint(&ff->ff_refcnt) in
that branch.

- fd_close failed to ensure all loads its caller had issued will have
happened-before the freeing, in the case where the fd is still in
use by another thread (fdp->fd_refcnt > 1 and ff->ff_refcnt-- > 0).

Fix: Change membar_producer to membar_release before
atomic_dec_uint(&ff->ff_refcnt).

- fd_close failed to ensure that any usage of fp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&ff->ff_refcnt).

- fd_free failed to ensure that any usage of fdp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&fdp->fd_refcnt).

While here, change membar_exit -> membar_release. No semantic
change, just updating away from the legacy API.

XXX pullup-8
XXX pullup-9
XXX pullup-10
1.252 Thu Feb 23 02:58:28 GMT 2023 riastradh kern_descrip.c: Fix membars around reference count decrement.

In general, the `last one out hit the lights' style of reference
counting (as opposed to the `whoever's destroying must wait for
pending users to finish' style) requires memory barriers like so:

... usage of resources associated with object ...
membar_release();
if (atomic_dec_uint_nv(&obj->refcnt) != 0)
return;
membar_acquire();
... freeing of resources associated with object ...

This way, all usage happens-before all freeing. This fixes several
errors:

- fd_close failed to ensure whatever its caller did would
happen-before the freeing, in the case where another thread is
concurrently trying to close the fd (ff->ff_file == NULL).

Fix: Add membar_release before atomic_dec_uint(&ff->ff_refcnt) in
that branch.

- fd_close failed to ensure all loads its caller had issued will have
happened-before the freeing, in the case where the fd is still in
use by another thread (fdp->fd_refcnt > 1 and ff->ff_refcnt-- > 0).

Fix: Change membar_producer to membar_release before
atomic_dec_uint(&ff->ff_refcnt).

- fd_close failed to ensure that any usage of fp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&ff->ff_refcnt).

- fd_free failed to ensure that any usage of fdp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&fdp->fd_refcnt).

While here, change membar_exit -> membar_release. No semantic
change, just updating away from the legacy API.

XXX pullup-8
XXX pullup-9
XXX pullup-10
1.252 Thu Feb 23 02:58:28 GMT 2023 riastradh kern_descrip.c: Fix membars around reference count decrement.

In general, the `last one out hit the lights' style of reference
counting (as opposed to the `whoever's destroying must wait for
pending users to finish' style) requires memory barriers like so:

... usage of resources associated with object ...
membar_release();
if (atomic_dec_uint_nv(&obj->refcnt) != 0)
return;
membar_acquire();
... freeing of resources associated with object ...

This way, all usage happens-before all freeing. This fixes several
errors:

- fd_close failed to ensure whatever its caller did would
happen-before the freeing, in the case where another thread is
concurrently trying to close the fd (ff->ff_file == NULL).

Fix: Add membar_release before atomic_dec_uint(&ff->ff_refcnt) in
that branch.

- fd_close failed to ensure all loads its caller had issued will have
happened-before the freeing, in the case where the fd is still in
use by another thread (fdp->fd_refcnt > 1 and ff->ff_refcnt-- > 0).

Fix: Change membar_producer to membar_release before
atomic_dec_uint(&ff->ff_refcnt).

- fd_close failed to ensure that any usage of fp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&ff->ff_refcnt).

- fd_free failed to ensure that any usage of fdp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&fdp->fd_refcnt).

While here, change membar_exit -> membar_release. No semantic
change, just updating away from the legacy API.

XXX pullup-8
XXX pullup-9
XXX pullup-10
1.252 Thu Feb 23 02:58:28 GMT 2023 riastradh kern_descrip.c: Fix membars around reference count decrement.

In general, the `last one out hit the lights' style of reference
counting (as opposed to the `whoever's destroying must wait for
pending users to finish' style) requires memory barriers like so:

... usage of resources associated with object ...
membar_release();
if (atomic_dec_uint_nv(&obj->refcnt) != 0)
return;
membar_acquire();
... freeing of resources associated with object ...

This way, all usage happens-before all freeing. This fixes several
errors:

- fd_close failed to ensure whatever its caller did would
happen-before the freeing, in the case where another thread is
concurrently trying to close the fd (ff->ff_file == NULL).

Fix: Add membar_release before atomic_dec_uint(&ff->ff_refcnt) in
that branch.

- fd_close failed to ensure all loads its caller had issued will have
happened-before the freeing, in the case where the fd is still in
use by another thread (fdp->fd_refcnt > 1 and ff->ff_refcnt-- > 0).

Fix: Change membar_producer to membar_release before
atomic_dec_uint(&ff->ff_refcnt).

- fd_close failed to ensure that any usage of fp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&ff->ff_refcnt).

- fd_free failed to ensure that any usage of fdp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&fdp->fd_refcnt).

While here, change membar_exit -> membar_release. No semantic
change, just updating away from the legacy API.

XXX pullup-8
XXX pullup-9
XXX pullup-10
1.252 Thu Feb 23 02:58:28 GMT 2023 riastradh kern_descrip.c: Fix membars around reference count decrement.

In general, the `last one out hit the lights' style of reference
counting (as opposed to the `whoever's destroying must wait for
pending users to finish' style) requires memory barriers like so:

... usage of resources associated with object ...
membar_release();
if (atomic_dec_uint_nv(&obj->refcnt) != 0)
return;
membar_acquire();
... freeing of resources associated with object ...

This way, all usage happens-before all freeing. This fixes several
errors:

- fd_close failed to ensure whatever its caller did would
happen-before the freeing, in the case where another thread is
concurrently trying to close the fd (ff->ff_file == NULL).

Fix: Add membar_release before atomic_dec_uint(&ff->ff_refcnt) in
that branch.

- fd_close failed to ensure all loads its caller had issued will have
happened-before the freeing, in the case where the fd is still in
use by another thread (fdp->fd_refcnt > 1 and ff->ff_refcnt-- > 0).

Fix: Change membar_producer to membar_release before
atomic_dec_uint(&ff->ff_refcnt).

- fd_close failed to ensure that any usage of fp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&ff->ff_refcnt).

- fd_free failed to ensure that any usage of fdp by other callers
would happen-before any freeing it does.

Fix: Add membar_acquire after atomic_dec_uint_nv(&fdp->fd_refcnt).

While here, change membar_exit -> membar_release. No semantic
change, just updating away from the legacy API.

XXX pullup-8
XXX pullup-9
XXX pullup-10
1.182 Wed Jul 02 16:45:19 GMT 2008 matt branches: 1.182.2; 1.182.4; 1.182.6;
Change {ff,fd}_exclose and ff_allocated to bool. Change exclose arg to
fd_dup to bool. Switch assignments from 1/0 to true/false.

This make alpha kernels compile. Bump kern to 4.99.69 since structure
changed.
H A Dsys_descrip.c1.5 Wed Jul 02 16:45:20 GMT 2008 matt branches: 1.5.2;
Change {ff,fd}_exclose and ff_allocated to bool. Change exclose arg to
fd_dup to bool. Switch assignments from 1/0 to true/false.

This make alpha kernels compile. Bump kern to 4.99.69 since structure
changed.
/src/sys/arch/hpcmips/isa/
H A Disa_machdep.c1.11 Mon Oct 16 03:32:44 GMT 2000 sato branches: 1.11.2;
DEBUG_FIND_COMPORT code. (by ngc@ff.iij4u.or.jp)
/src/sys/dev/pci/
H A Dif_tlp_pci.c1.79 Mon Jun 13 16:37:38 GMT 2005 tron Also use prom_getether() under NetBSD-sparc(64) if the MAC address
retrieved from the PROM starts with ff:ff:ff. The driver now works with
the onboard interface in the Tadpole SPARCle.
1.79 Mon Jun 13 16:37:38 GMT 2005 tron Also use prom_getether() under NetBSD-sparc(64) if the MAC address
retrieved from the PROM starts with ff:ff:ff. The driver now works with
the onboard interface in the Tadpole SPARCle.
1.79 Mon Jun 13 16:37:38 GMT 2005 tron Also use prom_getether() under NetBSD-sparc(64) if the MAC address
retrieved from the PROM starts with ff:ff:ff. The driver now works with
the onboard interface in the Tadpole SPARCle.
/src/tests/lib/libutil/
H A Dt_snprintb.c1.37 Tue Dec 31 08:56:21 GMT 2024 rillig tests/snprintb: clean up test for mixing 'Ff=:' conversions
/src/sys/arch/evbarm/gumstix/
H A Dgumstix_machdep.c1.17 Sat Nov 21 08:41:38 GMT 2009 kiyohara The variable ckenreg is used only when defined macro {FF,ST,BT,HW}UARTCONSOLE.

Completed in 106 milliseconds

12