1 /* $Id: at91usart.c,v 1.16 2026/11/10 03:04:58 thorpej Exp $ */ 2 /* $NetBSD: at91usart.c,v 1.16 2026/11/10 03:04:58 thorpej Exp $ */ 3 4 /* 5 * Copyright (c) 2007 Embedtronics Oy. All rights reserved. 6 * 7 * Copyright (c) 1998, 1999, 2001, 2002, 2004 The NetBSD Foundation, Inc. 8 * All rights reserved. 9 * 10 * This code is derived from software contributed to The NetBSD Foundation 11 * by Jesse Off 12 * 13 * This code is derived from software contributed to The NetBSD Foundation 14 * by Ichiro FUKUHARA and Naoto Shimazaki. 15 * 16 * This code is derived from software contributed to The NetBSD Foundation 17 * by IWAMOTO Toshihiro. 18 * 19 * This code is derived from software contributed to The NetBSD Foundation 20 * by Charles M. Hannum. 21 * 22 * Redistribution and use in source and binary forms, with or without 23 * modification, are permitted provided that the following conditions 24 * are met: 25 * 1. Redistributions of source code must retain the above copyright 26 * notice, this list of conditions and the following disclaimer. 27 * 2. Redistributions in binary form must reproduce the above copyright 28 * notice, this list of conditions and the following disclaimer in the 29 * documentation and/or other materials provided with the distribution. 30 * 31 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 32 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 33 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 34 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 35 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 36 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 37 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 38 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 39 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 40 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGE. 42 */ 43 44 /* 45 * Copyright (c) 1991 The Regents of the University of California. 46 * All rights reserved. 47 * 48 * Redistribution and use in source and binary forms, with or without 49 * modification, are permitted provided that the following conditions 50 * are met: 51 * 1. Redistributions of source code must retain the above copyright 52 * notice, this list of conditions and the following disclaimer. 53 * 2. Redistributions in binary form must reproduce the above copyright 54 * notice, this list of conditions and the following disclaimer in the 55 * documentation and/or other materials provided with the distribution. 56 * 3. Neither the name of the University nor the names of its contributors 57 * may be used to endorse or promote products derived from this software 58 * without specific prior written permission. 59 * 60 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 61 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 62 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 63 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 64 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 65 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 66 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 67 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 68 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 69 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 70 * SUCH DAMAGE. 71 * 72 * @(#)com.c 7.5 (Berkeley) 5/16/91 73 */ 74 75 /* 76 * TODO: hardware flow control 77 */ 78 79 #include <sys/cdefs.h> 80 __KERNEL_RCSID(0, "$NetBSD: at91usart.c,v 1.16 2026/11/10 03:04:58 thorpej Exp $"); 81 82 #include "opt_kgdb.h" 83 84 #ifdef RND_COM 85 #include <sys/rndsource.h> 86 #endif 87 88 #include <sys/param.h> 89 #include <sys/systm.h> 90 #include <sys/types.h> 91 #include <sys/conf.h> 92 #include <sys/file.h> 93 #include <sys/device.h> 94 #include <sys/kernel.h> 95 #include <sys/tty.h> 96 #include <sys/uio.h> 97 #include <sys/vnode.h> 98 #include <sys/kauth.h> 99 100 #include <machine/intr.h> 101 #include <sys/bus.h> 102 103 #include <arm/at91/at91reg.h> 104 #include <arm/at91/at91var.h> 105 #include <arm/at91/at91usartreg.h> 106 #include <arm/at91/at91usartvar.h> 107 108 #include <dev/cons.h> 109 110 static int at91usart_param(struct tty *, struct termios *); 111 static void at91usart_start(struct tty *); 112 static int at91usart_hwiflow(struct tty *, int); 113 114 #if 0 115 static u_int cflag2lcrhi(tcflag_t); 116 #endif 117 static void at91usart_set(struct at91usart_softc *); 118 119 #if NOTYET 120 int at91usart_cn_getc(dev_t); 121 void at91usart_cn_putc(dev_t, int); 122 void at91usart_cn_pollc(dev_t, int); 123 void at91usart_cn_probe(struct consdev *); 124 void at91usart_cn_init(struct consdev *); 125 126 static struct at91usart_cons_softc { 127 bus_space_tag_t sc_iot; 128 bus_space_handle_t sc_ioh; 129 bus_addr_t sc_hwbase; 130 int sc_ospeed; 131 tcflag_t sc_cflag; 132 int sc_attached; 133 134 uint8_t *sc_rx_ptr; 135 uint8_t sc_rx_fifo[64]; 136 } usart_cn_sc; 137 138 static struct cnm_state at91usart_cnm_state; 139 #endif /* NOTYET */ 140 141 static void at91usart_soft(void* arg); 142 inline static void at91usart_txsoft(struct at91usart_softc *, struct tty *); 143 inline static void at91usart_rxsoft(struct at91usart_softc *, struct tty *, unsigned csr); 144 145 #define PDC_BLOCK_SIZE 64 146 147 //CFATTACH_DECL_NEW(at91usart, sizeof(struct at91usart_softc), 148 // at91usart_match, at91usart_attach, NULL, NULL); 149 150 //#define USART_DEBUG 10 151 152 #ifdef USART_DEBUG 153 int usart_debug = USART_DEBUG; 154 #define DPRINTFN(n,fmt) if (usart_debug >= (n)) printf fmt 155 #else 156 #define DPRINTFN(n,fmt) 157 #endif 158 159 extern struct cfdriver at91usart_cd; 160 161 dev_type_open(at91usart_open); 162 dev_type_close(at91usart_close); 163 dev_type_read(at91usart_read); 164 dev_type_write(at91usart_write); 165 dev_type_ioctl(at91usart_ioctl); 166 dev_type_stop(at91usart_stop); 167 dev_type_tty(at91usart_tty); 168 dev_type_poll(at91usart_poll); 169 170 const struct cdevsw at91usart_cdevsw = { 171 .d_open = at91usart_open, 172 .d_close = at91usart_close, 173 .d_read = at91usart_read, 174 .d_write = at91usart_write, 175 .d_ioctl = at91usart_ioctl, 176 .d_stop = at91usart_stop, 177 .d_tty = at91usart_tty, 178 .d_poll = at91usart_poll, 179 .d_mmap = nommap, 180 .d_kqfilter = ttykqfilter, 181 .d_discard = nodiscard, 182 .d_flag = D_TTY 183 }; 184 185 #if NOTYET 186 struct consdev at91usart_cons = { 187 at91usart_cn_probe, NULL, at91usart_cn_getc, at91usart_cn_putc, at91usart_cn_pollc, NULL, 188 NULL, NULL, NODEV, CN_REMOTE 189 }; 190 #endif /* NOTYET */ 191 192 #ifndef DEFAULT_COMSPEED 193 #define DEFAULT_COMSPEED 115200 194 #endif 195 196 #define COMUNIT(x) TTUNIT(x) 197 #define COMDIALOUT(x) TTDIALOUT(x) 198 199 #define COM_ISALIVE(sc) ((sc)->enabled != 0 && device_is_active((sc)->sc_dev)) 200 201 static inline void 202 at91usart_writereg(struct at91usart_softc *sc, int reg, u_int val) 203 { 204 bus_space_write_4(sc->sc_iot, sc->sc_ioh, reg, val); 205 } 206 207 static inline u_int 208 at91usart_readreg(struct at91usart_softc *sc, int reg) 209 { 210 return bus_space_read_4(sc->sc_iot, sc->sc_ioh, reg); 211 } 212 #if 0 213 static int 214 at91usart_match(device_t parent, cfdata_t cf, void *aux) 215 { 216 if (strcmp(cf->cf_name, "at91usart") == 0) 217 return 1; 218 return 0; 219 } 220 #endif 221 static int at91usart_intr(void* arg); 222 223 void 224 at91usart_attach_subr(struct at91usart_softc *sc, struct at91bus_attach_args *sa) 225 { 226 struct tty *tp; 227 int err; 228 229 printf("\n"); 230 231 if (bus_space_map(sa->sa_iot, sa->sa_addr, sa->sa_size, 0, &sc->sc_ioh)) 232 panic("%s: Cannot map registers", device_xname(sc->sc_dev)); 233 234 sc->sc_iot = sa->sa_iot; 235 sc->sc_hwbase = sa->sa_addr; 236 sc->sc_dmat = sa->sa_dmat; 237 sc->sc_pid = sa->sa_pid; 238 239 /* allocate fifos */ 240 err = at91pdc_alloc_fifo(sc->sc_dmat, &sc->sc_rx_fifo, AT91USART_RING_SIZE, BUS_DMA_READ | BUS_DMA_STREAMING); 241 if (err) 242 panic("%s: cannot allocate rx fifo", device_xname(sc->sc_dev)); 243 244 err = at91pdc_alloc_fifo(sc->sc_dmat, &sc->sc_tx_fifo, AT91USART_RING_SIZE, BUS_DMA_WRITE | BUS_DMA_STREAMING); 245 if (err) 246 panic("%s: cannot allocate tx fifo", device_xname(sc->sc_dev)); 247 248 /* initialize uart */ 249 at91_peripheral_clock(sc->sc_pid, 1); 250 251 at91usart_writereg(sc, US_IDR, -1); 252 at91usart_writereg(sc, US_RTOR, 12); // 12-bit timeout 253 at91usart_writereg(sc, US_PDC + PDC_PTCR, PDC_PTCR_TXTDIS | PDC_PTCR_RXTDIS); 254 at91_intr_establish(sa->sa_pid, IPL_TTY, INTR_HIGH_LEVEL, at91usart_intr, sc); 255 USART_INIT(sc, 115200U); 256 257 #ifdef NOTYET 258 if (sc->sc_iot == usart_cn_sc.sc_iot 259 && sc->sc_hwbase == usart_cn_sc.sc_hwbase) { 260 usart_cn_sc.sc_attached = 1; 261 /* Make sure the console is always "hardwired". */ 262 delay(10000); /* wait for output to finish */ 263 SET(sc->sc_hwflags, COM_HW_CONSOLE); 264 SET(sc->sc_swflags, TIOCFLAG_SOFTCAR); 265 SET(sc->sc_ier, USART_INT_RXRDY); 266 USARTREG(USART_IER) = USART_INT_RXRDY; // @@@@@ 267 } 268 #endif // NOTYET 269 270 tp = tty_alloc(); 271 tp->t_oproc = at91usart_start; 272 tp->t_param = at91usart_param; 273 tp->t_hwiflow = at91usart_hwiflow; 274 275 sc->sc_tty = tp; 276 277 tty_attach(tp); 278 279 #if NOTYET 280 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 281 int maj; 282 283 /* locate the major number */ 284 maj = cdevsw_lookup_major(&at91usart_cdevsw); 285 286 cn_tab->cn_dev = makedev(maj, device_unit(sc->sc_dev)); 287 288 aprint_normal("%s: console (maj %u min %u cn_dev %u)\n", 289 device_xname(sc->sc_dev), maj, device_unit(sc->sc_dev), 290 cn_tab->cn_dev); 291 } 292 #endif /* NOTYET */ 293 294 sc->sc_si = softint_establish(SOFTINT_SERIAL, at91usart_soft, sc); 295 296 #ifdef RND_COM 297 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 298 RND_TYPE_TTY, RND_FLAG_DEFAULT); 299 #endif 300 301 /* if there are no enable/disable functions, assume the device 302 is always enabled */ 303 if (!sc->enable) 304 sc->enabled = 1; 305 306 /* XXX configure register */ 307 /* xxx_config(sc) */ 308 309 SET(sc->sc_hwflags, COM_HW_DEV_OK); 310 } 311 312 static int 313 at91usart_param(struct tty *tp, struct termios *t) 314 { 315 struct at91usart_softc *sc 316 = device_lookup_private(&at91usart_cd, COMUNIT(tp->t_dev)); 317 int s; 318 319 if (COM_ISALIVE(sc) == 0) 320 return (EIO); 321 322 if (t->c_ispeed && t->c_ispeed != t->c_ospeed) 323 return (EINVAL); 324 325 /* 326 * For the console, always force CLOCAL and !HUPCL, so that the port 327 * is always active. 328 */ 329 if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || 330 ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 331 SET(t->c_cflag, CLOCAL); 332 CLR(t->c_cflag, HUPCL); 333 } 334 335 /* 336 * If there were no changes, don't do anything. This avoids dropping 337 * input and improves performance when all we did was frob things like 338 * VMIN and VTIME. 339 */ 340 if (tp->t_ospeed == t->c_ospeed && 341 tp->t_cflag == t->c_cflag) 342 return (0); 343 344 s = spltty(); 345 346 sc->sc_brgr = (AT91_MSTCLK / 16 + t->c_ospeed / 2) / t->c_ospeed; 347 348 /* And copy to tty. */ 349 tp->t_ispeed = 0; 350 tp->t_ospeed = t->c_ospeed; 351 tp->t_cflag = t->c_cflag; 352 at91usart_set(sc); 353 354 splx(s); 355 356 /* 357 * Update the tty layer's idea of the carrier bit. 358 * We tell tty the carrier is always on. 359 */ 360 (void) (*tp->t_linesw->l_modem)(tp, 1); 361 362 #ifdef COM_DEBUG 363 if (com_debug) 364 comstatus(sc, "comparam "); 365 #endif 366 367 /* tell the upper layer about hwflow.. */ 368 if (sc->hwflow) 369 (*sc->hwflow)(sc, t->c_cflag); 370 371 return (0); 372 } 373 374 static int 375 at91usart_hwiflow(struct tty *tp, int block) 376 { 377 if (block) { 378 /* tty discipline wants to block */ 379 } else { 380 /* tty discipline wants to unblock */ 381 } 382 return (0); 383 } 384 385 static __inline void 386 at91usart_start_tx(struct at91usart_softc *sc) 387 { 388 if (!sc->start_tx) 389 at91usart_writereg(sc, US_PDC + PDC_PTCR, PDC_PTCR_TXTEN); 390 else 391 (*sc->start_tx)(sc); 392 } 393 394 static __inline void 395 at91usart_stop_tx(struct at91usart_softc *sc) 396 { 397 if (!sc->stop_tx) 398 at91usart_writereg(sc, US_PDC + PDC_PTCR, PDC_PTCR_TXTDIS); 399 else 400 (*sc->stop_tx)(sc); 401 } 402 403 static __inline void 404 at91usart_rx_started(struct at91usart_softc *sc) 405 { 406 if (sc->rx_started) 407 (*sc->rx_started)(sc); 408 } 409 410 static __inline void 411 at91usart_rx_stopped(struct at91usart_softc *sc) 412 { 413 if (sc->rx_stopped) 414 (*sc->rx_stopped)(sc); 415 } 416 417 static __inline void 418 at91usart_rx_rts_ctl(struct at91usart_softc *sc, int enabled) 419 { 420 if (sc->rx_rts_ctl) 421 (*sc->rx_rts_ctl)(sc, enabled); 422 } 423 424 static void 425 at91usart_filltx(struct at91usart_softc *sc) 426 { 427 struct tty *tp = sc->sc_tty; 428 int len; 429 void *dst; 430 431 // post write handler 432 AT91PDC_FIFO_POSTWRITE(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, US_PDC, 433 &sc->sc_tx_fifo); 434 435 // copy more data to fifo: 436 if (sc->sc_tbc > 0 437 && (dst = AT91PDC_FIFO_WRPTR(&sc->sc_tx_fifo, &len)) != NULL) { 438 // copy data to fifo 439 if (len > sc->sc_tbc) 440 len = sc->sc_tbc; 441 memcpy(dst, sc->sc_tba, len); 442 sc->sc_tba += len; 443 if ((sc->sc_tbc -= len) <= 0) 444 CLR(tp->t_state, TS_BUSY); 445 // update fifo 446 AT91PDC_FIFO_WRITTEN(&sc->sc_tx_fifo, len); 447 // tell tty interface we've sent some bytes 448 ndflush(&tp->t_outq, len); 449 } 450 451 // start sending data... 452 if (AT91PDC_FIFO_PREWRITE(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, 453 US_PDC, &sc->sc_tx_fifo, PDC_BLOCK_SIZE)) { 454 at91usart_start_tx(sc); 455 SET(sc->sc_ier, US_CSR_TXEMPTY | US_CSR_ENDTX); 456 } else { 457 CLR(sc->sc_ier, US_CSR_ENDTX); 458 } 459 } 460 461 static void 462 at91usart_start(struct tty *tp) 463 { 464 struct at91usart_softc *sc 465 = device_lookup_private(&at91usart_cd, COMUNIT(tp->t_dev)); 466 int s; 467 468 if (COM_ISALIVE(sc) == 0) { 469 DPRINTFN(5, ("%s: %s / COM_ISALIVE == 0\n", device_xname(sc->sc_dev), __FUNCTION__)); 470 return; 471 } 472 473 s = spltty(); 474 if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) { 475 DPRINTFN(5, ("%s: %s: TS_BUSY || TS_TIMEOUT || TS_TTSTOP\n", device_xname(sc->sc_dev), __FUNCTION__)); 476 goto out; 477 } 478 479 if (!ttypull(tp)) 480 goto out; 481 482 /* Grab the first contiguous region of buffer space. */ 483 { 484 u_char *tba; 485 int tbc; 486 487 tba = tp->t_outq.c_cf; 488 tbc = ndqb(&tp->t_outq, 0); 489 490 sc->sc_tba = tba; 491 sc->sc_tbc = tbc; 492 } 493 494 SET(tp->t_state, TS_BUSY); 495 496 /* Output the first chunk of the contiguous buffer. */ 497 at91usart_filltx(sc); 498 at91usart_writereg(sc, US_IER, sc->sc_ier); 499 DPRINTFN(5, ("%s: %s, ier=%08x (csr=%08x)\n", device_xname(sc->sc_dev), __FUNCTION__, sc->sc_ier, at91usart_readreg(sc, US_CSR))); 500 501 out: 502 splx(s); 503 504 return; 505 } 506 507 static __inline__ void 508 at91usart_break(struct at91usart_softc *sc, int onoff) 509 { 510 at91usart_writereg(sc, US_CR, onoff ? US_CR_STTBRK : US_CR_STPBRK); 511 } 512 513 static void 514 at91usart_shutdown(struct at91usart_softc *sc) 515 { 516 int s; 517 518 s = spltty(); 519 520 /* turn of dma */ 521 at91usart_writereg(sc, US_PDC + PDC_PTCR, PDC_PTCR_TXTDIS | PDC_PTCR_RXTDIS); 522 at91usart_writereg(sc, US_PDC + PDC_TNCR, 0); 523 at91usart_writereg(sc, US_PDC + PDC_TCR, 0); 524 at91usart_writereg(sc, US_PDC + PDC_RNCR, 0); 525 at91usart_writereg(sc, US_PDC + PDC_RCR, 0); 526 527 /* Turn off interrupts. */ 528 at91usart_writereg(sc, US_IDR, -1); 529 530 /* Clear any break condition set with TIOCSBRK. */ 531 at91usart_break(sc, 0); 532 at91usart_set(sc); 533 534 if (sc->disable) { 535 #ifdef DIAGNOSTIC 536 if (!sc->enabled) 537 panic("at91usart_shutdown: not enabled?"); 538 #endif 539 (*sc->disable)(sc); 540 sc->enabled = 0; 541 } 542 splx(s); 543 } 544 545 int 546 at91usart_open(dev_t dev, int flag, int mode, struct lwp *l) 547 { 548 struct at91usart_softc *sc; 549 struct tty *tp; 550 int s; 551 int error; 552 553 sc = device_lookup_private(&at91usart_cd, COMUNIT(dev)); 554 if (sc == NULL || !ISSET(sc->sc_hwflags, COM_HW_DEV_OK)) 555 return (ENXIO); 556 557 if (!device_is_active(sc->sc_dev)) 558 return (ENXIO); 559 560 #ifdef KGDB 561 /* 562 * If this is the kgdb port, no other use is permitted. 563 */ 564 if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) 565 return (EBUSY); 566 #endif 567 568 tp = sc->sc_tty; 569 570 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 571 return (EBUSY); 572 573 s = spltty(); 574 575 /* 576 * Do the following iff this is a first open. 577 */ 578 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 579 struct termios t; 580 581 tp->t_dev = dev; 582 583 if (sc->enable) { 584 if ((*sc->enable)(sc)) { 585 splx(s); 586 printf("%s: device enable failed\n", 587 device_xname(sc->sc_dev)); 588 return (EIO); 589 } 590 sc->enabled = 1; 591 #if 0 592 /* XXXXXXXXXXXXXXX */ 593 com_config(sc); 594 #endif 595 } 596 597 /* reset fifos: */ 598 AT91PDC_RESET_FIFO(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, US_PDC, &sc->sc_rx_fifo, 0); 599 AT91PDC_RESET_FIFO(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, US_PDC, &sc->sc_tx_fifo, 1); 600 601 /* reset receive */ 602 at91usart_writereg(sc, US_CR, US_CR_RSTSTA | US_CR_STTTO); 603 604 /* Turn on interrupts. */ 605 sc->sc_ier = US_CSR_ENDRX|US_CSR_RXBUFF|US_CSR_TIMEOUT|US_CSR_RXBRK; 606 at91usart_writereg(sc, US_IER, sc->sc_ier); 607 608 /* enable DMA: */ 609 at91usart_writereg(sc, US_PDC + PDC_PTCR, PDC_PTCR_RXTEN); 610 611 /* 612 * Initialize the termios status to the defaults. Add in the 613 * sticky bits from TIOCSFLAGS. 614 */ 615 t.c_ispeed = 0; 616 /* if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 617 t.c_ospeed = usart_cn_sc.sc_ospeed; 618 t.c_cflag = usart_cn_sc.sc_cflag; 619 } else*/ { 620 t.c_ospeed = TTYDEF_SPEED; 621 t.c_cflag = TTYDEF_CFLAG; 622 } 623 if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL)) 624 SET(t.c_cflag, CLOCAL); 625 if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) 626 SET(t.c_cflag, CRTSCTS); 627 if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF)) 628 SET(t.c_cflag, MDMBUF); 629 630 /* Make sure at91usart_param() will do something. */ 631 tp->t_ospeed = 0; 632 (void) at91usart_param(tp, &t); 633 tp->t_iflag = TTYDEF_IFLAG; 634 tp->t_oflag = TTYDEF_OFLAG; 635 tp->t_lflag = TTYDEF_LFLAG; 636 ttychars(tp); 637 ttsetwater(tp); 638 639 /* and unblock. */ 640 CLR(sc->sc_rx_flags, RX_ANY_BLOCK); 641 642 #ifdef COM_DEBUG 643 if (at91usart_debug) 644 comstatus(sc, "at91usart_open "); 645 #endif 646 647 } 648 649 splx(s); 650 651 error = ttyopen(tp, COMDIALOUT(dev), ISSET(flag, O_NONBLOCK)); 652 if (error) 653 goto bad; 654 655 error = (*tp->t_linesw->l_open)(dev, tp); 656 if (error) 657 goto bad; 658 659 return (0); 660 661 bad: 662 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 663 /* 664 * We failed to open the device, and nobody else had it opened. 665 * Clean up the state as appropriate. 666 */ 667 at91usart_shutdown(sc); 668 } 669 670 return (error); 671 } 672 673 int 674 at91usart_close(dev_t dev, int flag, int mode, struct lwp *l) 675 { 676 struct at91usart_softc *sc = device_lookup_private(&at91usart_cd, COMUNIT(dev)); 677 struct tty *tp = sc->sc_tty; 678 679 /* XXX This is for cons.c. */ 680 if (!ISSET(tp->t_state, TS_ISOPEN)) 681 return (0); 682 683 (*tp->t_linesw->l_close)(tp, flag); 684 ttyclose(tp); 685 686 if (COM_ISALIVE(sc) == 0) 687 return (0); 688 689 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 690 /* 691 * Although we got a last close, the device may still be in 692 * use; e.g. if this was the dialout node, and there are still 693 * processes waiting for carrier on the non-dialout node. 694 */ 695 at91usart_shutdown(sc); 696 } 697 698 return (0); 699 } 700 701 int 702 at91usart_read(dev_t dev, struct uio *uio, int flag) 703 { 704 struct at91usart_softc *sc = device_lookup_private(&at91usart_cd, COMUNIT(dev)); 705 struct tty *tp = sc->sc_tty; 706 707 if (COM_ISALIVE(sc) == 0) 708 return (EIO); 709 710 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 711 } 712 713 int 714 at91usart_write(dev_t dev, struct uio *uio, int flag) 715 { 716 struct at91usart_softc *sc = device_lookup_private(&at91usart_cd, COMUNIT(dev)); 717 struct tty *tp = sc->sc_tty; 718 719 if (COM_ISALIVE(sc) == 0) 720 return (EIO); 721 722 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 723 } 724 725 int 726 at91usart_poll(dev_t dev, int events, struct lwp *l) 727 { 728 struct at91usart_softc *sc = device_lookup_private(&at91usart_cd, COMUNIT(dev)); 729 struct tty *tp = sc->sc_tty; 730 731 if (COM_ISALIVE(sc) == 0) 732 return (EIO); 733 734 return ((*tp->t_linesw->l_poll)(tp, events, l)); 735 } 736 737 struct tty * 738 at91usart_tty(dev_t dev) 739 { 740 struct at91usart_softc *sc = device_lookup_private(&at91usart_cd, COMUNIT(dev)); 741 struct tty *tp = sc->sc_tty; 742 743 return (tp); 744 } 745 746 int 747 at91usart_ioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 748 { 749 struct at91usart_softc *sc = device_lookup_private(&at91usart_cd, COMUNIT(dev)); 750 struct tty *tp = sc->sc_tty; 751 int error; 752 int s; 753 754 if (COM_ISALIVE(sc) == 0) 755 return (EIO); 756 757 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); 758 if (error != EPASSTHROUGH) 759 return (error); 760 761 error = ttioctl(tp, cmd, data, flag, l); 762 if (error != EPASSTHROUGH) 763 return (error); 764 765 error = 0; 766 767 s = spltty(); 768 769 switch (cmd) { 770 case TIOCSBRK: 771 at91usart_break(sc, 1); 772 break; 773 774 case TIOCCBRK: 775 at91usart_break(sc, 0); 776 break; 777 778 case TIOCGFLAGS: 779 *(int *)data = sc->sc_swflags; 780 break; 781 782 case TIOCSFLAGS: 783 error = kauth_authorize_device_tty(l->l_cred, 784 KAUTH_DEVICE_TTY_PRIVSET, tp); 785 if (error) 786 break; 787 sc->sc_swflags = *(int *)data; 788 break; 789 790 default: 791 error = EPASSTHROUGH; 792 break; 793 } 794 795 splx(s); 796 797 return (error); 798 } 799 800 /* 801 * Stop output on a line. 802 */ 803 void 804 at91usart_stop(struct tty *tp, int flag) 805 { 806 struct at91usart_softc *sc 807 = device_lookup_private(&at91usart_cd, COMUNIT(tp->t_dev)); 808 int s; 809 810 s = spltty(); 811 if (ISSET(tp->t_state, TS_BUSY)) { 812 /* Stop transmitting at the next chunk. */ 813 sc->sc_tbc = 0; 814 if (!ISSET(tp->t_state, TS_TTSTOP)) 815 SET(tp->t_state, TS_FLUSH); 816 } 817 splx(s); 818 } 819 820 #if 0 821 static u_int 822 cflag2lcrhi(tcflag_t cflag) 823 { 824 uint32_t mr; 825 826 switch (cflag & CSIZE) { 827 default: 828 mr = 0x0; 829 break; 830 } 831 #if 0 832 mr |= (cflag & PARENB) ? LinCtrlHigh_PEN : 0; 833 mr |= (cflag & PARODD) ? 0 : LinCtrlHigh_EPS; 834 mr |= (cflag & CSTOPB) ? LinCtrlHigh_STP2 : 0; 835 mr |= LinCtrlHigh_FEN; /* FIFO always enabled */ 836 #endif 837 mr |= USART_MR_PAR_NONE; 838 return (mr); 839 } 840 #endif 841 842 843 static void 844 at91usart_set(struct at91usart_softc *sc) 845 { 846 at91usart_writereg(sc, US_MR, US_MR_CHRL_8 | US_MR_PAR_NONE | US_MR_NBSTOP_1); 847 at91usart_writereg(sc, US_BRGR, sc->sc_brgr); 848 at91usart_writereg(sc, US_CR, US_CR_TXEN | US_CR_RXEN); // @@@ just in case 849 } 850 851 #if NOTYET 852 int 853 at91usart_cn_attach(bus_space_tag_t iot, bus_addr_t iobase, bus_space_handle_t ioh, 854 uint32_t mstclk, int ospeed, tcflag_t cflag) 855 { 856 cn_tab = &at91usart_cons; 857 cn_init_magic(&at91usart_cnm_state); 858 cn_set_magic("\047\001"); 859 860 usart_cn_sc.sc_iot = iot; 861 usart_cn_sc.sc_ioh = ioh; 862 usart_cn_sc.sc_hwbase = iobase; 863 usart_cn_sc.sc_ospeed = ospeed; 864 usart_cn_sc.sc_cflag = cflag; 865 866 USART_INIT(mstclk, ospeed); 867 868 return (0); 869 } 870 871 void 872 at91usart_cn_probe(struct consdev *cp) 873 { 874 cp->cn_pri = CN_REMOTE; 875 } 876 877 void 878 at91usart_cn_pollc(dev_t dev, int on) 879 { 880 if (on) { 881 // enable polling mode 882 USARTREG(US_IDR) = USART_INT_RXRDY; 883 } else { 884 // disable polling mode 885 USARTREG(US_IER) = USART_INT_RXRDY; 886 } 887 } 888 889 void 890 at91usart_cn_putc(dev_t dev, int c) 891 { 892 int s; 893 #if 0 894 bus_space_tag_t iot = usart_cn_sc.sc_iot; 895 bus_space_handle_t ioh = usart_cn_sc.sc_ioh; 896 #endif 897 s = spltty(); 898 899 USART_PUTC(c); 900 901 #ifdef DEBUG 902 if (c == '\r') { 903 while((USARTREG(USART_SR) & USART_SR_TXEMPTY) == 0) 904 ; 905 } 906 #endif 907 908 splx(s); 909 } 910 911 int 912 at91usart_cn_getc(dev_t dev) 913 { 914 int c, sr; 915 int s; 916 #if 0 917 bus_space_tag_t iot = usart_cn_sc.sc_iot; 918 bus_space_handle_t ioh = usart_cn_sc.sc_ioh; 919 #endif 920 921 s = spltty(); 922 923 while ((c = USART_PEEKC()) == -1) { 924 splx(s); 925 s = spltty(); 926 } 927 ; 928 sr = USARTREG(USART_SR); 929 if (ISSET(sr, USART_SR_FRAME) && c == 0) { 930 USARTREG(USART_CR) = USART_CR_RSTSTA; // reset status bits 931 c = CNC_BREAK; 932 } 933 cn_check_magic(dev, c, &at91usart_cnm_state); 934 splx(s); 935 936 c &= 0xff; 937 938 return (c); 939 } 940 #endif /* NOTYET */ 941 942 inline static void 943 at91usart_rxsoft(struct at91usart_softc *sc, struct tty *tp, unsigned csr) 944 { 945 u_char *start, *get, *end; 946 int cc; 947 948 AT91PDC_FIFO_POSTREAD(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, US_PDC, 949 &sc->sc_rx_fifo); 950 951 if (ISSET(csr, US_CSR_TIMEOUT | US_CSR_RXBRK)) 952 at91usart_rx_stopped(sc); 953 954 while ((start = AT91PDC_FIFO_RDPTR(&sc->sc_rx_fifo, &cc)) != NULL) { 955 int (*rint)(int, struct tty *) = tp->t_linesw->l_rint; 956 int code; 957 958 if (!ISSET(csr, US_CSR_TIMEOUT | US_CSR_RXBRK)) 959 at91usart_rx_started(sc); 960 961 for (get = start, end = start + cc; get < end; get++) { 962 code = *get; 963 if ((*rint)(code, tp) == -1) { 964 /* 965 * The line discipline's buffer is out of space. 966 */ 967 if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 968 /* 969 * We're either not using flow control, or the 970 * line discipline didn't tell us to block for 971 * some reason. Either way, we have no way to 972 * know when there's more space available, so 973 * just drop the rest of the data. 974 */ 975 get = end; 976 printf("%s: receive missing data!\n", 977 device_xname(sc->sc_dev)); 978 } else { 979 /* 980 * Don't schedule any more receive processing 981 * until the line discipline tells us there's 982 * space available (through comhwiflow()). 983 * Leave the rest of the data in the input 984 * buffer. 985 */ 986 SET(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 987 } 988 break; 989 } 990 } 991 992 // tell we've read some bytes... 993 AT91PDC_FIFO_READ(&sc->sc_rx_fifo, get - start); 994 995 if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) 996 break; 997 } 998 999 // h/w flow control hook: 1000 if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) 1001 at91usart_rx_rts_ctl(sc, (AT91PDC_FIFO_SPACE(&sc->sc_rx_fifo) > PDC_BLOCK_SIZE * 2)); 1002 1003 // write next pointer if USART is ready: 1004 if (AT91PDC_FIFO_PREREAD(sc->sc_iot, sc->sc_ioh, sc->sc_dmat, US_PDC, 1005 &sc->sc_rx_fifo, PDC_BLOCK_SIZE)) { 1006 SET(sc->sc_ier, US_CSR_ENDRX | US_CSR_RXBUFF | US_CSR_TIMEOUT | US_CSR_RXBRK); 1007 } else { 1008 CLR(sc->sc_ier, US_CSR_ENDRX | US_CSR_RXBUFF | US_CSR_TIMEOUT | US_CSR_RXBRK); 1009 } 1010 } 1011 1012 inline static void 1013 at91usart_txsoft(struct at91usart_softc *sc, struct tty *tp) 1014 { 1015 at91usart_filltx(sc); 1016 if (!ISSET(tp->t_state, TS_BUSY)) 1017 (*tp->t_linesw->l_start)(tp); 1018 } 1019 1020 1021 static void 1022 at91usart_soft(void* arg) 1023 { 1024 struct at91usart_softc *sc = arg; 1025 int s; 1026 u_int csr; 1027 1028 if (COM_ISALIVE(sc) == 0) 1029 return; 1030 1031 s = spltty(); 1032 csr = sc->sc_csr; 1033 while (csr != 0) { 1034 if ((csr &= sc->sc_ier) == 0) 1035 break; 1036 // splx(s); 1037 DPRINTFN(5, ("%s: %s / csr = 0x%08x\n", device_xname(sc->sc_dev), __FUNCTION__, csr)); 1038 if (ISSET(csr, US_CSR_ENDRX | US_CSR_RXBUFF | US_CSR_TIMEOUT | US_CSR_RXBRK)) { 1039 /* receive interrupt */ 1040 if (ISSET(csr, US_CSR_RXBRK)) { 1041 // break received! 1042 at91usart_writereg(sc, US_CR, US_CR_RSTSTA | US_CR_STTTO); 1043 } else if (ISSET(csr, US_CSR_TIMEOUT)) { 1044 // timeout received 1045 at91usart_writereg(sc, US_CR, US_CR_STTTO); 1046 } 1047 at91usart_rxsoft(sc, sc->sc_tty, csr); 1048 } 1049 if (ISSET(csr, US_CSR_TXEMPTY)) { 1050 at91usart_stop_tx(sc); 1051 CLR(sc->sc_ier, US_CSR_TXEMPTY); 1052 if (AT91PDC_FIFO_EMPTY(&sc->sc_tx_fifo)) { 1053 // everything sent! 1054 if (ISSET(sc->sc_tty->t_state, TS_FLUSH)) 1055 CLR(sc->sc_tty->t_state, TS_FLUSH); 1056 } 1057 } 1058 if (ISSET(csr, US_CSR_TXEMPTY | US_CSR_ENDTX)) { 1059 /* transmit interrupt! */ 1060 at91usart_txsoft(sc, sc->sc_tty); 1061 } 1062 // s = spltty(); 1063 csr = at91usart_readreg(sc, US_CSR); 1064 } 1065 sc->sc_csr = 0; 1066 at91usart_writereg(sc, US_IER, sc->sc_ier); // re-enable interrupts 1067 splx(s); 1068 } 1069 1070 1071 static int 1072 at91usart_intr(void* arg) 1073 { 1074 struct at91usart_softc *sc = arg; 1075 u_int csr, imr; 1076 1077 // get out if interrupts are not enabled 1078 imr = at91usart_readreg(sc, US_IMR); 1079 if (!imr) 1080 return 0; 1081 // get out if pending interrupt is not enabled 1082 csr = at91usart_readreg(sc, US_CSR); 1083 DPRINTFN(6,("%s: csr=%08X imr=%08X\n", device_xname(sc->sc_dev), csr, imr)); 1084 if (!ISSET(csr, imr)) 1085 return 0; 1086 1087 // ok, we DO have some interrupts to serve! let softint do it 1088 sc->sc_csr = csr; 1089 at91usart_writereg(sc, US_IDR, -1); 1090 1091 /* Wake up the poller. */ 1092 softint_schedule(sc->sc_si); 1093 1094 /* we're done for now */ 1095 return (1); 1096 1097 } 1098