1 /* $NetBSD: ipaq_gpioreg.h,v 1.8 2025/09/07 21:31:20 andvar Exp $ */ 2 3 /*- 4 * Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved. 5 * 6 * This code is derived from software contributed to The NetBSD Foundation 7 * by Ichiro FUKUHARA (ichiro (at) ichiro.org). 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 /* 32 * iPAQ H3600 specific parameter 33 */ 34 /* 35 port I/O(Active) name desc 36 0 I(L) PWR_ON# button detect: power-on 37 1 I(L) IP_IRQ# cpu-interrupt 38 2...9 O LDD{8..15} LCD DATA(8-15) 39 10 I(L) CARD_IND1# PCMCIA Socket1 inserted detection 40 11 I(L) CARD_IRQ1# PCMCIA slot1 IRQ 41 12 O CLK_SET0 clock select 0 for audio codec 42 13 O CLK_SET1 clock select 1 for audio codec 43 14 I/O L3_SDA UDA1341 L3DATA 44 15 O L3_MODE UDA1341 L3MODE 45 16 O L3_SCLK UDA1341 L3SCLK 46 17 I(L) CARD_IND0# PCMCIA Socket0 inserted detection 47 18 I(L) KEY_ACT# button detect: center button 48 19 I SYS_CLK Stereo audio codev external clock 49 20 I(H) BAT_FAULT Battery fault 50 21 I(L) CARD_IRQ0# PCMCIA slot0 IRQ 51 22 I(L) LOCK# expansion pack lock/unlock signal 52 23 I(H) COM_DCD RS-232 DCD 53 24 I(H) OPT_IRQ expansion pack shared IRQ 54 25 I(H) COM_CTS RS-232 CTS 55 26 O(H) COM_RTS RS-232 RTS 56 27 O(L) OPT_DETECT# Indicates presence of expansion pack inserted 57 58 Extended GPIO 59 0 O(H) VPEN Enables programming and erasing of Flash 60 1 O(H) CARD_RESET CF/PCMCIA card reset signal 61 2 O(H) OPT_RESET Expansion pack reset signal 62 3 O(L) CODEC_RESET# onboard codec reset signal 63 4 O(H) OPT_NVRAM_ON Enables power supply to the NVRAM of the 64 Expansion pack.(=OPT_ON) 65 5 O(H) OPT_ON Enables full power supply to the Expansion pack. 66 6 O(H) LCD_ON Enables LCD 3.3V power supply 67 7 O(H) RS232_ON Enables RS232 68 8 O(H) LCD_PCI Enables power to LCD control IC 69 9 O(H) IR_ON Enables power to IR module 70 10 O(H) AUD_ON Enables power to audio output amp. 71 11 O(H) AUD_PWR_ON Enables power to all audio modules. 72 12 O(H) QMUTE Mutes the onboard audio codec 73 13 O IR_FSEL FIR mode selection:H=FIR,L=SIR 74 14 O(H) LCD_5V_ON Enables 5V to the LCD module 75 15 O(H) LVDD_ON Enables 9V and -6.5V to the LCD module 76 */ 77 78 #define GPIO_H3600_POWER_BUTTON GPIO (0) 79 #define GPIO_H3600_CLK_SET0 GPIO (12) 80 #define GPIO_H3600_CLK_SET1 GPIO (13) 81 #define GPIO_H3600_PCMCIA_CD0 GPIO (17) 82 #define GPIO_H3600_PCMCIA_CD1 GPIO (10) 83 #define GPIO_H3600_PCMCIA_IRQ0 GPIO (21) 84 #define GPIO_H3600_PCMCIA_IRQ1 GPIO (11) 85 #define GPIO_H3600_L3_DATA GPIO (14) 86 #define GPIO_H3600_L3_MODE GPIO (15) 87 #define GPIO_H3600_L3_CLK GPIO (16) 88 #define GPIO_H3600_OPT_LOCK GPIO (22) 89 #define GPIO_H3600_OPT_IRQ GPIO (24) 90 #define GPIO_H3600_OPT_DETECT GPIO (27) 91 92 #define EGPIO_H3600_VPEN GPIO (0) 93 #define EGPIO_H3600_CARD_RESET GPIO (1) 94 #define EGPIO_H3600_OPT_RESET GPIO (2) 95 #define EGPIO_H3600_CODEC_RESET GPIO (3) 96 #define EGPIO_H3600_OPT_NVRAM_ON GPIO (4) 97 #define EGPIO_H3600_OPT_ON GPIO (5) 98 #define EGPIO_H3600_LCD33_ON GPIO (6) 99 #define EGPIO_H3600_RS232_ON GPIO (7) 100 #define EGPIO_H3600_LCD_PCI GPIO (8) 101 #define EGPIO_H3600_IR_ON GPIO (9) 102 #define EGPIO_H3600_AUD_ON GPIO (10) 103 #define EGPIO_H3600_AUD_PWRON GPIO (11) 104 #define EGPIO_H3600_QMUTE GPIO (12) 105 #define EGPIO_H3600_IR_FSEL GPIO (13) 106 #define EGPIO_H3600_LCD5_ON GPIO (14) 107 #define EGPIO_H3600_LVDD_ON GPIO (15) 108 109 #define EGPIO_INIT EGPIO_H3600_RS232_ON| \ 110 EGPIO_H3600_AUD_PWRON| \ 111 EGPIO_H3600_QMUTE| \ 112 EGPIO_H3600_AUD_ON 113 114 #define EGPIO_LCD_INIT EGPIO_H3600_LCD33_ON| \ 115 EGPIO_H3600_LCD_PCI| \ 116 EGPIO_H3600_LCD5_ON| \ 117 EGPIO_H3600_LVDD_ON 118
Indexes created Mon Sep 22 05:09:51 GMT 2025