1 /* 2 * Copyright (C) 2015, 2016 Zodiac Inflight Innovations 3 * 4 * Based on an original 'vf610-twr.dts' which is Copyright 2015, 5 * Freescale Semiconductor, Inc. 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 * 12 * a) This file is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * version 2 as published by the Free Software Foundation. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45 #include "vf610.dtsi" 46 47 / { 48 chosen { 49 stdout-path = "serial0:115200n8"; 50 }; 51 52 memory@80000000 { 53 device_type = "memory"; 54 reg = <0x80000000 0x20000000>; 55 }; 56 57 gpio-leds { 58 compatible = "gpio-leds"; 59 pinctrl-0 = <&pinctrl_leds_debug>; 60 pinctrl-names = "default"; 61 62 debug { 63 label = "zii:green:debug1"; 64 gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; 65 linux,default-trigger = "heartbeat"; 66 }; 67 }; 68 69 reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { 70 compatible = "regulator-fixed"; 71 regulator-name = "vcc_3v3_mcu"; 72 regulator-min-microvolt = <3300000>; 73 regulator-max-microvolt = <3300000>; 74 }; 75 76 usb0_vbus: regulator-usb0-vbus { 77 compatible = "regulator-fixed"; 78 pinctrl-0 = <&pinctrl_usb_vbus>; 79 regulator-name = "usb_vbus"; 80 regulator-min-microvolt = <5000000>; 81 regulator-max-microvolt = <5000000>; 82 enable-active-high; 83 regulator-always-on; 84 regulator-boot-on; 85 gpio = <&gpio0 6 0>; 86 }; 87 88 supply-voltage-monitor { 89 compatible = "iio-hwmon"; 90 io-channels = <&adc0 8>, /* VCC_1V5 */ 91 <&adc0 9>, /* VCC_1V8 */ 92 <&adc1 8>, /* VCC_1V0 */ 93 <&adc1 9>; /* VCC_1V2 */ 94 }; 95 }; 96 97 &adc0 { 98 pinctrl-names = "default"; 99 pinctrl-0 = <&pinctrl_adc0_ad5>; 100 vref-supply = <®_vcc_3v3_mcu>; 101 status = "okay"; 102 }; 103 104 &edma0 { 105 status = "okay"; 106 }; 107 108 &edma1 { 109 status = "okay"; 110 }; 111 112 &esdhc1 { 113 pinctrl-names = "default"; 114 pinctrl-0 = <&pinctrl_esdhc1>; 115 bus-width = <4>; 116 status = "okay"; 117 }; 118 119 &fec0 { 120 phy-mode = "rmii"; 121 pinctrl-names = "default"; 122 pinctrl-0 = <&pinctrl_fec0>; 123 status = "okay"; 124 }; 125 126 &fec1 { 127 phy-mode = "rmii"; 128 pinctrl-names = "default"; 129 pinctrl-0 = <&pinctrl_fec1>; 130 status = "okay"; 131 132 fixed-link { 133 speed = <100>; 134 full-duplex; 135 }; 136 137 mdio1: mdio { 138 #address-cells = <1>; 139 #size-cells = <0>; 140 clock-frequency = <12500000>; 141 suppress-preamble; 142 status = "okay"; 143 }; 144 }; 145 146 &i2c0 { 147 clock-frequency = <100000>; 148 pinctrl-names = "default", "gpio"; 149 pinctrl-0 = <&pinctrl_i2c0>; 150 pinctrl-1 = <&pinctrl_i2c0_gpio>; 151 scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 152 sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; 153 status = "okay"; 154 155 lm75@48 { 156 compatible = "national,lm75"; 157 reg = <0x48>; 158 }; 159 160 eeprom@50 { 161 compatible = "atmel,24c04"; 162 reg = <0x50>; 163 }; 164 165 eeprom@52 { 166 compatible = "atmel,24c04"; 167 reg = <0x52>; 168 }; 169 170 ds1682@6b { 171 compatible = "dallas,ds1682"; 172 reg = <0x6b>; 173 }; 174 }; 175 176 &i2c1 { 177 clock-frequency = <100000>; 178 pinctrl-names = "default"; 179 pinctrl-0 = <&pinctrl_i2c1>; 180 status = "okay"; 181 }; 182 183 &i2c2 { 184 clock-frequency = <100000>; 185 pinctrl-names = "default"; 186 pinctrl-0 = <&pinctrl_i2c2>; 187 status = "okay"; 188 }; 189 190 &qspi0 { 191 pinctrl-names = "default"; 192 pinctrl-0 = <&pinctrl_qspi0>; 193 status = "okay"; 194 195 /* 196 * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR 197 * modes, so, spi-max-frequency is limited to 90MHz 198 */ 199 flash@0 { 200 compatible = "jedec,spi-nor"; 201 #address-cells = <1>; 202 #size-cells = <1>; 203 spi-max-frequency = <90000000>; 204 spi-rx-bus-width = <4>; 205 reg = <0>; 206 m25p,fast-read; 207 }; 208 209 flash@2 { 210 compatible = "jedec,spi-nor"; 211 #address-cells = <1>; 212 #size-cells = <1>; 213 spi-max-frequency = <90000000>; 214 spi-rx-bus-width = <4>; 215 reg = <2>; 216 m25p,fast-read; 217 }; 218 }; 219 220 &uart0 { 221 pinctrl-names = "default"; 222 pinctrl-0 = <&pinctrl_uart0>; 223 status = "okay"; 224 }; 225 226 &uart1 { 227 pinctrl-names = "default"; 228 pinctrl-0 = <&pinctrl_uart1>; 229 status = "okay"; 230 }; 231 232 &uart2 { 233 pinctrl-names = "default"; 234 pinctrl-0 = <&pinctrl_uart2>; 235 status = "okay"; 236 }; 237 238 &usbdev0 { 239 disable-over-current; 240 vbus-supply = <&usb0_vbus>; 241 dr_mode = "host"; 242 status = "okay"; 243 }; 244 245 &usbh1 { 246 disable-over-current; 247 status = "okay"; 248 }; 249 250 &usbmisc0 { 251 status = "okay"; 252 }; 253 254 &usbmisc1 { 255 status = "okay"; 256 }; 257 258 &usbphy0 { 259 status = "okay"; 260 }; 261 262 &usbphy1 { 263 status = "okay"; 264 }; 265 266 &tempsensor { 267 io-channels = <&adc0 16>; 268 }; 269 270 &iomuxc { 271 pinctrl_adc0_ad5: adc0ad5grp { 272 fsl,pins = < 273 VF610_PAD_PTC30__ADC0_SE5 0x00a1 274 >; 275 }; 276 277 pinctrl_dspi0: dspi0grp { 278 fsl,pins = < 279 VF610_PAD_PTB18__DSPI0_CS1 0x1182 280 VF610_PAD_PTB19__DSPI0_CS0 0x1182 281 VF610_PAD_PTB20__DSPI0_SIN 0x1181 282 VF610_PAD_PTB21__DSPI0_SOUT 0x1182 283 VF610_PAD_PTB22__DSPI0_SCK 0x1182 284 >; 285 }; 286 287 pinctrl_dspi2: dspi2grp { 288 fsl,pins = < 289 VF610_PAD_PTD31__DSPI2_CS1 0x1182 290 VF610_PAD_PTD30__DSPI2_CS0 0x1182 291 VF610_PAD_PTD29__DSPI2_SIN 0x1181 292 VF610_PAD_PTD28__DSPI2_SOUT 0x1182 293 VF610_PAD_PTD27__DSPI2_SCK 0x1182 294 >; 295 }; 296 297 pinctrl_esdhc1: esdhc1grp { 298 fsl,pins = < 299 VF610_PAD_PTA24__ESDHC1_CLK 0x31ef 300 VF610_PAD_PTA25__ESDHC1_CMD 0x31ef 301 VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef 302 VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef 303 VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef 304 VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef 305 VF610_PAD_PTA7__GPIO_134 0x219d 306 >; 307 }; 308 309 pinctrl_fec0: fec0grp { 310 fsl,pins = < 311 VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 312 VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 313 VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 314 VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 315 VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 316 VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 317 VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 318 VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 319 VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 320 >; 321 }; 322 323 pinctrl_fec1: fec1grp { 324 fsl,pins = < 325 VF610_PAD_PTA6__RMII_CLKIN 0x30d1 326 VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 327 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 328 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 329 VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 330 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 331 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 332 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 333 VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 334 VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 335 >; 336 }; 337 338 pinctrl_gpio_spi0: pinctrl-gpio-spi0 { 339 fsl,pins = < 340 VF610_PAD_PTB22__GPIO_44 0x33e2 341 VF610_PAD_PTB21__GPIO_43 0x33e2 342 VF610_PAD_PTB20__GPIO_42 0x33e1 343 VF610_PAD_PTB19__GPIO_41 0x33e2 344 VF610_PAD_PTB18__GPIO_40 0x33e2 345 >; 346 }; 347 348 pinctrl_gpio_switch0: pinctrl-gpio-switch0 { 349 fsl,pins = < 350 VF610_PAD_PTB5__GPIO_27 0x219d 351 >; 352 }; 353 354 pinctrl_gpio_switch1: pinctrl-gpio-switch1 { 355 fsl,pins = < 356 VF610_PAD_PTB4__GPIO_26 0x219d 357 >; 358 }; 359 360 pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { 361 fsl,pins = < 362 VF610_PAD_PTE14__GPIO_119 0x31c2 363 >; 364 }; 365 366 pinctrl_i2c0: i2c0grp { 367 fsl,pins = < 368 VF610_PAD_PTB14__I2C0_SCL 0x37ff 369 VF610_PAD_PTB15__I2C0_SDA 0x37ff 370 >; 371 }; 372 373 pinctrl_i2c0_gpio: i2c0grp-gpio { 374 fsl,pins = < 375 VF610_PAD_PTB14__GPIO_36 0x31c2 376 VF610_PAD_PTB15__GPIO_37 0x31c2 377 >; 378 }; 379 380 381 pinctrl_i2c1: i2c1grp { 382 fsl,pins = < 383 VF610_PAD_PTB16__I2C1_SCL 0x37ff 384 VF610_PAD_PTB17__I2C1_SDA 0x37ff 385 >; 386 }; 387 388 pinctrl_i2c2: i2c2grp { 389 fsl,pins = < 390 VF610_PAD_PTA22__I2C2_SCL 0x37ff 391 VF610_PAD_PTA23__I2C2_SDA 0x37ff 392 >; 393 }; 394 395 pinctrl_leds_debug: pinctrl-leds-debug { 396 fsl,pins = < 397 VF610_PAD_PTD20__GPIO_74 0x31c2 398 >; 399 }; 400 401 pinctrl_qspi0: qspi0grp { 402 fsl,pins = < 403 VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2 404 VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2 405 VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3 406 VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3 407 VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3 408 VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3 409 VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2 410 VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2 411 VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3 412 VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3 413 VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3 414 VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3 415 >; 416 }; 417 418 pinctrl_uart0: uart0grp { 419 fsl,pins = < 420 VF610_PAD_PTB10__UART0_TX 0x21a2 421 VF610_PAD_PTB11__UART0_RX 0x21a1 422 >; 423 }; 424 425 pinctrl_uart1: uart1grp { 426 fsl,pins = < 427 VF610_PAD_PTB23__UART1_TX 0x21a2 428 VF610_PAD_PTB24__UART1_RX 0x21a1 429 >; 430 }; 431 432 pinctrl_uart2: uart2grp { 433 fsl,pins = < 434 VF610_PAD_PTD23__UART2_TX 0x21a2 435 VF610_PAD_PTD22__UART2_RX 0x21a1 436 >; 437 }; 438 439 pinctrl_usb_vbus: pinctrl-usb-vbus { 440 fsl,pins = < 441 VF610_PAD_PTA16__GPIO_6 0x31c2 442 >; 443 }; 444 445 pinctrl_usb0_host: usb0-host-grp { 446 fsl,pins = < 447 VF610_PAD_PTD6__GPIO_85 0x0062 448 >; 449 }; 450 }; 451
Indexes created Tue Sep 30 10:09:55 GMT 2025