HomeSort by: relevance | last modified time | path
    Searched refs:I2C2 (Results 1 - 25 of 28) sorted by relevancy

1 2

  /src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/
omap3-ha-common.dtsi 75 /* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
76 &i2c2 {
socfpga_cyclone5_chameleon96.dts 84 &i2c2 {
90 label = "HS-I2C2";
omap3-ha-lcd.dts 85 /* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
86 &i2c2 {
stih410-b2260.dts 116 i2c2: i2c@9842000 { label
117 label = "HS-I2C2";
at91sam9x5.dtsi 37 i2c2 = &i2c2;
433 i2c2 {
434 pinctrl_i2c2: i2c2-0 {
436 <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */
437 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */
460 <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */
461 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */
760 i2c2: i2c@f8018000 { label
aspeed-g6-pinctrl.dtsi 261 function = "I2C2";
262 groups = "I2C2";
stm32f746.dtsi 351 i2c2: i2c@40005800 { label
356 resets = <&rcc STM32F7_APB1_RESET(I2C2)>;
imx6dl-alti6p.dts 27 i2c2-mux {
29 i2c-parent = <&i2c2>;
291 &i2c2 {
446 /* NOTE: DDC is done via I2C2, so DON'T configure DDC
imx6q-prti6q.dts 229 ddc-i2c-bus = <&i2c2>;
246 &i2c2 {
463 /* NOTE: DDC is done via I2C2, so DON'T
r8a7791-porter.dts 149 * A fallback to GPIO is provided for I2C2.
153 i2c-parent = <&i2c2>, <&gpioi2c2>;
248 i2c2_pins: i2c2 {
249 groups = "i2c2";
250 function = "i2c2";
371 &i2c2 {
stm32mp15xx-dhcor-avenger96.dtsi 210 &i2c2 { /* X6 I2C2 */
stm32h743.dtsi 166 i2c2: i2c@40005800 { label
173 resets = <&rcc STM32H7_APB1L_RESET(I2C2)>;
r8a7790-lager.dts 333 * IIC2 and I2C2 may be switched using pinmux.
338 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
601 i2c2_pins: i2c2 {
602 groups = "i2c2";
603 function = "i2c2";
828 &i2c2 {
r8a7791-koelsch.dts 357 * A fallback to GPIO is provided for I2C2.
361 i2c-parent = <&i2c2>, <&gpioi2c2>;
503 i2c2_pins: i2c2 {
504 groups = "i2c2";
505 function = "i2c2";
777 &i2c2 {
r8a7793-gose.dts 325 * A fallback to GPIO is provided for I2C2.
329 i2c-parent = <&i2c2>, <&gpioi2c2>;
477 i2c2_pins: i2c2 {
478 groups = "i2c2";
479 function = "i2c2";
715 &i2c2 {
ste-ux500-samsung-kyle.dts 381 /* I2C2 */
ste-ux500-samsung-skomer.dts 362 /* I2C2 */
ste-ux500-samsung-codina.dts 533 /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
ste-ux500-samsung-gavini.dts 515 /* I2C2 "AGC I2C" */
ste-ux500-samsung-janice.dts 554 /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
tegra30-apalis-v1.1.dtsi 221 /* Apalis I2C2 (DDC) */
  /src/sys/external/gpl2/dts/dist/include/dt-bindings/clock/
stm32mp1-clks.h 40 #define I2C2 25
  /src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/xilinx/
zynqmp-zcu100-revC.dts 185 label = "HS-I2C2";
  /src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/freescale/
imx8mq-thor96.dts 234 &i2c2 {
246 /* HS-I2C2 */
  /src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/qcom/
apq8016-sbc.dtsi 170 label = "HS-I2C2";

Completed in 35 milliseconds

1 2