HomeSort by: relevance | last modified time | path
    Searched refs:I2C4 (Results 1 - 14 of 14) sorted by relevancy

  /src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/
twl4030_omap3.dtsi 25 * If your board is not using the I2C4 pins with twl4030, then don't include
27 * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
tegra124-apalis-eval.dts 103 /* I2C4 (DDC): unused */
tegra124-apalis-v1.2-eval.dts 100 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
ste-dbx5x0-pinctrl.dtsi 224 * Activating I2C4 will conflict with UART1 about the same pins so do not
225 * enable I2C4 and UART1 at the same time.
227 i2c4 {
230 function = "i2c4";
aspeed-g6-pinctrl.dtsi 271 function = "I2C4";
272 groups = "I2C4";
stm32f746.dtsi 375 i2c4: i2c@40006000 { label
380 resets = <&rcc STM32F7_APB1_RESET(I2C4)>;
r8a7794-alt.dts 227 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
232 i2c-parent = <&i2c4>, <&gpioi2c4>;
311 i2c4_pins: i2c4 {
312 groups = "i2c4";
313 function = "i2c4";
444 &i2c4 {
aspeed-g4.dtsi 16 i2c4 = &i2c4;
506 i2c4: i2c-bus@140 { label
874 function = "I2C4";
875 groups = "I2C4";
stm32h743.dtsi 426 i2c4: i2c@58001c00 { label
433 resets = <&rcc STM32H7_APB4_RESET(I2C4)>;
r8a7791-koelsch.dts 451 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
456 i2c-parent = <&i2c4>, <&gpioi2c4>;
508 i2c4_pins: i2c4 {
510 function = "i2c4";
784 &i2c4 {
r8a7793-gose.dts 430 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
435 i2c-parent = <&i2c4>, <&gpioi2c4>;
482 i2c4_pins: i2c4 {
484 function = "i2c4";
759 &i2c4 {
aspeed-g5.dtsi 17 i2c4 = &i2c4;
626 i2c4: i2c-bus@140 { label
984 function = "I2C4";
985 groups = "I2C4";
tegra124-apalis-v1.2.dtsi 304 /* Apalis I2C4 (DDC) */
307 nvidia,function = "i2c4";
315 nvidia,function = "i2c4";
  /src/sys/external/gpl2/dts/dist/include/dt-bindings/clock/
stm32mp1-clks.h 77 #define I2C4 62

Completed in 21 milliseconds