Home | History | Annotate | Line # | Download | only in ssl
      1 /*
      2  * Copyright 2005-2021 The OpenSSL Project Authors. All Rights Reserved.
      3  *
      4  * Licensed under the OpenSSL license (the "License").  You may not use
      5  * this file except in compliance with the License.  You can obtain a copy
      6  * in the file LICENSE in the source distribution or at
      7  * https://www.openssl.org/source/license.html
      8  */
      9 
     10 #include "e_os.h"
     11 #include <stdio.h>
     12 #include <openssl/objects.h>
     13 #include <openssl/rand.h>
     14 #include "ssl_local.h"
     15 
     16 static void get_current_time(struct timeval *t);
     17 static int dtls1_handshake_write(SSL *s);
     18 static size_t dtls1_link_min_mtu(void);
     19 
     20 /* XDTLS:  figure out the right values */
     21 static const size_t g_probable_mtu[] = { 1500, 512, 256 };
     22 
     23 const SSL3_ENC_METHOD DTLSv1_enc_data = {
     24     tls1_enc,
     25     tls1_mac,
     26     tls1_setup_key_block,
     27     tls1_generate_master_secret,
     28     tls1_change_cipher_state,
     29     tls1_final_finish_mac,
     30     TLS_MD_CLIENT_FINISH_CONST, TLS_MD_CLIENT_FINISH_CONST_SIZE,
     31     TLS_MD_SERVER_FINISH_CONST, TLS_MD_SERVER_FINISH_CONST_SIZE,
     32     tls1_alert_code,
     33     tls1_export_keying_material,
     34     SSL_ENC_FLAG_DTLS | SSL_ENC_FLAG_EXPLICIT_IV,
     35     dtls1_set_handshake_header,
     36     dtls1_close_construct_packet,
     37     dtls1_handshake_write
     38 };
     39 
     40 const SSL3_ENC_METHOD DTLSv1_2_enc_data = {
     41     tls1_enc,
     42     tls1_mac,
     43     tls1_setup_key_block,
     44     tls1_generate_master_secret,
     45     tls1_change_cipher_state,
     46     tls1_final_finish_mac,
     47     TLS_MD_CLIENT_FINISH_CONST, TLS_MD_CLIENT_FINISH_CONST_SIZE,
     48     TLS_MD_SERVER_FINISH_CONST, TLS_MD_SERVER_FINISH_CONST_SIZE,
     49     tls1_alert_code,
     50     tls1_export_keying_material,
     51     SSL_ENC_FLAG_DTLS | SSL_ENC_FLAG_EXPLICIT_IV | SSL_ENC_FLAG_SIGALGS
     52         | SSL_ENC_FLAG_SHA256_PRF | SSL_ENC_FLAG_TLS1_2_CIPHERS,
     53     dtls1_set_handshake_header,
     54     dtls1_close_construct_packet,
     55     dtls1_handshake_write
     56 };
     57 
     58 long dtls1_default_timeout(void)
     59 {
     60     /*
     61      * 2 hours, the 24 hours mentioned in the DTLSv1 spec is way too long for
     62      * http, the cache would over fill
     63      */
     64     return (60 * 60 * 2);
     65 }
     66 
     67 int dtls1_new(SSL *s)
     68 {
     69     DTLS1_STATE *d1;
     70 
     71     if (!DTLS_RECORD_LAYER_new(&s->rlayer)) {
     72         return 0;
     73     }
     74 
     75     if (!ssl3_new(s))
     76         return 0;
     77     if ((d1 = OPENSSL_zalloc(sizeof(*d1))) == NULL) {
     78         ssl3_free(s);
     79         return 0;
     80     }
     81 
     82     d1->buffered_messages = pqueue_new();
     83     d1->sent_messages = pqueue_new();
     84 
     85     if (s->server) {
     86         d1->cookie_len = sizeof(s->d1->cookie);
     87     }
     88 
     89     d1->link_mtu = 0;
     90     d1->mtu = 0;
     91 
     92     if (d1->buffered_messages == NULL || d1->sent_messages == NULL) {
     93         pqueue_free(d1->buffered_messages);
     94         pqueue_free(d1->sent_messages);
     95         OPENSSL_free(d1);
     96         ssl3_free(s);
     97         return 0;
     98     }
     99 
    100     s->d1 = d1;
    101 
    102     if (!s->method->ssl_clear(s))
    103         return 0;
    104 
    105     return 1;
    106 }
    107 
    108 static void dtls1_clear_queues(SSL *s)
    109 {
    110     dtls1_clear_received_buffer(s);
    111     dtls1_clear_sent_buffer(s);
    112 }
    113 
    114 void dtls1_clear_received_buffer(SSL *s)
    115 {
    116     pitem *item = NULL;
    117     hm_fragment *frag = NULL;
    118 
    119     while ((item = pqueue_pop(s->d1->buffered_messages)) != NULL) {
    120         frag = (hm_fragment *)item->data;
    121         dtls1_hm_fragment_free(frag);
    122         pitem_free(item);
    123     }
    124 }
    125 
    126 void dtls1_clear_sent_buffer(SSL *s)
    127 {
    128     pitem *item = NULL;
    129     hm_fragment *frag = NULL;
    130 
    131     while ((item = pqueue_pop(s->d1->sent_messages)) != NULL) {
    132         frag = (hm_fragment *)item->data;
    133         dtls1_hm_fragment_free(frag);
    134         pitem_free(item);
    135     }
    136 }
    137 
    138 
    139 void dtls1_free(SSL *s)
    140 {
    141     DTLS_RECORD_LAYER_free(&s->rlayer);
    142 
    143     ssl3_free(s);
    144 
    145     if (s->d1 != NULL) {
    146         dtls1_clear_queues(s);
    147         pqueue_free(s->d1->buffered_messages);
    148         pqueue_free(s->d1->sent_messages);
    149     }
    150 
    151     OPENSSL_free(s->d1);
    152     s->d1 = NULL;
    153 }
    154 
    155 int dtls1_clear(SSL *s)
    156 {
    157     pqueue *buffered_messages;
    158     pqueue *sent_messages;
    159     size_t mtu;
    160     size_t link_mtu;
    161 
    162     DTLS_RECORD_LAYER_clear(&s->rlayer);
    163 
    164     if (s->d1) {
    165         DTLS_timer_cb timer_cb = s->d1->timer_cb;
    166 
    167         buffered_messages = s->d1->buffered_messages;
    168         sent_messages = s->d1->sent_messages;
    169         mtu = s->d1->mtu;
    170         link_mtu = s->d1->link_mtu;
    171 
    172         dtls1_clear_queues(s);
    173 
    174         memset(s->d1, 0, sizeof(*s->d1));
    175 
    176         /* Restore the timer callback from previous state */
    177         s->d1->timer_cb = timer_cb;
    178 
    179         if (s->server) {
    180             s->d1->cookie_len = sizeof(s->d1->cookie);
    181         }
    182 
    183         if (SSL_get_options(s) & SSL_OP_NO_QUERY_MTU) {
    184             s->d1->mtu = mtu;
    185             s->d1->link_mtu = link_mtu;
    186         }
    187 
    188         s->d1->buffered_messages = buffered_messages;
    189         s->d1->sent_messages = sent_messages;
    190     }
    191 
    192     if (!ssl3_clear(s))
    193         return 0;
    194 
    195     if (s->method->version == DTLS_ANY_VERSION)
    196         s->version = DTLS_MAX_VERSION;
    197 #ifndef OPENSSL_NO_DTLS1_METHOD
    198     else if (s->options & SSL_OP_CISCO_ANYCONNECT)
    199         s->client_version = s->version = DTLS1_BAD_VER;
    200 #endif
    201     else
    202         s->version = s->method->version;
    203 
    204     return 1;
    205 }
    206 
    207 long dtls1_ctrl(SSL *s, int cmd, long larg, void *parg)
    208 {
    209     int ret = 0;
    210 
    211     switch (cmd) {
    212     case DTLS_CTRL_GET_TIMEOUT:
    213         if (dtls1_get_timeout(s, (struct timeval *)parg) != NULL) {
    214             ret = 1;
    215         }
    216         break;
    217     case DTLS_CTRL_HANDLE_TIMEOUT:
    218         ret = dtls1_handle_timeout(s);
    219         break;
    220     case DTLS_CTRL_SET_LINK_MTU:
    221         if (larg < (long)dtls1_link_min_mtu())
    222             return 0;
    223         s->d1->link_mtu = larg;
    224         return 1;
    225     case DTLS_CTRL_GET_LINK_MIN_MTU:
    226         return (long)dtls1_link_min_mtu();
    227     case SSL_CTRL_SET_MTU:
    228         /*
    229          *  We may not have a BIO set yet so can't call dtls1_min_mtu()
    230          *  We'll have to make do with dtls1_link_min_mtu() and max overhead
    231          */
    232         if (larg < (long)dtls1_link_min_mtu() - DTLS1_MAX_MTU_OVERHEAD)
    233             return 0;
    234         s->d1->mtu = larg;
    235         return larg;
    236     default:
    237         ret = ssl3_ctrl(s, cmd, larg, parg);
    238         break;
    239     }
    240     return ret;
    241 }
    242 
    243 void dtls1_start_timer(SSL *s)
    244 {
    245     unsigned int sec, usec;
    246 
    247 #ifndef OPENSSL_NO_SCTP
    248     /* Disable timer for SCTP */
    249     if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
    250         memset(&s->d1->next_timeout, 0, sizeof(s->d1->next_timeout));
    251         return;
    252     }
    253 #endif
    254 
    255     /*
    256      * If timer is not set, initialize duration with 1 second or
    257      * a user-specified value if the timer callback is installed.
    258      */
    259     if (s->d1->next_timeout.tv_sec == 0 && s->d1->next_timeout.tv_usec == 0) {
    260 
    261         if (s->d1->timer_cb != NULL)
    262             s->d1->timeout_duration_us = s->d1->timer_cb(s, 0);
    263         else
    264             s->d1->timeout_duration_us = 1000000;
    265     }
    266 
    267     /* Set timeout to current time */
    268     get_current_time(&(s->d1->next_timeout));
    269 
    270     /* Add duration to current time */
    271 
    272     sec  = s->d1->timeout_duration_us / 1000000;
    273     usec = s->d1->timeout_duration_us - (sec * 1000000);
    274 
    275     s->d1->next_timeout.tv_sec  += sec;
    276     s->d1->next_timeout.tv_usec += usec;
    277 
    278     if (s->d1->next_timeout.tv_usec >= 1000000) {
    279         s->d1->next_timeout.tv_sec++;
    280         s->d1->next_timeout.tv_usec -= 1000000;
    281     }
    282 
    283     BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT, 0,
    284              &(s->d1->next_timeout));
    285 }
    286 
    287 struct timeval *dtls1_get_timeout(SSL *s, struct timeval *timeleft)
    288 {
    289     struct timeval timenow;
    290 
    291     /* If no timeout is set, just return NULL */
    292     if (s->d1->next_timeout.tv_sec == 0 && s->d1->next_timeout.tv_usec == 0) {
    293         return NULL;
    294     }
    295 
    296     /* Get current time */
    297     get_current_time(&timenow);
    298 
    299     /* If timer already expired, set remaining time to 0 */
    300     if (s->d1->next_timeout.tv_sec < timenow.tv_sec ||
    301         (s->d1->next_timeout.tv_sec == timenow.tv_sec &&
    302          s->d1->next_timeout.tv_usec <= timenow.tv_usec)) {
    303         memset(timeleft, 0, sizeof(*timeleft));
    304         return timeleft;
    305     }
    306 
    307     /* Calculate time left until timer expires */
    308     memcpy(timeleft, &(s->d1->next_timeout), sizeof(struct timeval));
    309     timeleft->tv_sec -= timenow.tv_sec;
    310     timeleft->tv_usec -= timenow.tv_usec;
    311     if (timeleft->tv_usec < 0) {
    312         timeleft->tv_sec--;
    313         timeleft->tv_usec += 1000000;
    314     }
    315 
    316     /*
    317      * If remaining time is less than 15 ms, set it to 0 to prevent issues
    318      * because of small divergences with socket timeouts.
    319      */
    320     if (timeleft->tv_sec == 0 && timeleft->tv_usec < 15000) {
    321         memset(timeleft, 0, sizeof(*timeleft));
    322     }
    323 
    324     return timeleft;
    325 }
    326 
    327 int dtls1_is_timer_expired(SSL *s)
    328 {
    329     struct timeval timeleft;
    330 
    331     /* Get time left until timeout, return false if no timer running */
    332     if (dtls1_get_timeout(s, &timeleft) == NULL) {
    333         return 0;
    334     }
    335 
    336     /* Return false if timer is not expired yet */
    337     if (timeleft.tv_sec > 0 || timeleft.tv_usec > 0) {
    338         return 0;
    339     }
    340 
    341     /* Timer expired, so return true */
    342     return 1;
    343 }
    344 
    345 static void dtls1_double_timeout(SSL *s)
    346 {
    347     s->d1->timeout_duration_us *= 2;
    348     if (s->d1->timeout_duration_us > 60000000)
    349         s->d1->timeout_duration_us = 60000000;
    350 }
    351 
    352 void dtls1_stop_timer(SSL *s)
    353 {
    354     /* Reset everything */
    355     memset(&s->d1->timeout, 0, sizeof(s->d1->timeout));
    356     memset(&s->d1->next_timeout, 0, sizeof(s->d1->next_timeout));
    357     s->d1->timeout_duration_us = 1000000;
    358     BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT, 0,
    359              &(s->d1->next_timeout));
    360     /* Clear retransmission buffer */
    361     dtls1_clear_sent_buffer(s);
    362 }
    363 
    364 int dtls1_check_timeout_num(SSL *s)
    365 {
    366     size_t mtu;
    367 
    368     s->d1->timeout.num_alerts++;
    369 
    370     /* Reduce MTU after 2 unsuccessful retransmissions */
    371     if (s->d1->timeout.num_alerts > 2
    372         && !(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) {
    373         mtu =
    374             BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0, NULL);
    375         if (mtu < s->d1->mtu)
    376             s->d1->mtu = mtu;
    377     }
    378 
    379     if (s->d1->timeout.num_alerts > DTLS1_TMO_ALERT_COUNT) {
    380         /* fail the connection, enough alerts have been sent */
    381         SSLfatal(s, SSL_AD_NO_ALERT, SSL_F_DTLS1_CHECK_TIMEOUT_NUM,
    382                  SSL_R_READ_TIMEOUT_EXPIRED);
    383         return -1;
    384     }
    385 
    386     return 0;
    387 }
    388 
    389 int dtls1_handle_timeout(SSL *s)
    390 {
    391     /* if no timer is expired, don't do anything */
    392     if (!dtls1_is_timer_expired(s)) {
    393         return 0;
    394     }
    395 
    396     if (s->d1->timer_cb != NULL)
    397         s->d1->timeout_duration_us = s->d1->timer_cb(s, s->d1->timeout_duration_us);
    398     else
    399         dtls1_double_timeout(s);
    400 
    401     if (dtls1_check_timeout_num(s) < 0) {
    402         /* SSLfatal() already called */
    403         return -1;
    404     }
    405 
    406     s->d1->timeout.read_timeouts++;
    407     if (s->d1->timeout.read_timeouts > DTLS1_TMO_READ_COUNT) {
    408         s->d1->timeout.read_timeouts = 1;
    409     }
    410 
    411     dtls1_start_timer(s);
    412     /* Calls SSLfatal() if required */
    413     return dtls1_retransmit_buffered_messages(s);
    414 }
    415 
    416 static void get_current_time(struct timeval *t)
    417 {
    418 #if defined(_WIN32)
    419     SYSTEMTIME st;
    420     union {
    421         unsigned __int64 ul;
    422         FILETIME ft;
    423     } now;
    424 
    425     GetSystemTime(&st);
    426     SystemTimeToFileTime(&st, &now.ft);
    427     /* re-bias to 1/1/1970 */
    428 # ifdef  __MINGW32__
    429     now.ul -= 116444736000000000ULL;
    430 # else
    431     /* *INDENT-OFF* */
    432     now.ul -= 116444736000000000UI64;
    433     /* *INDENT-ON* */
    434 # endif
    435     t->tv_sec = (long)(now.ul / 10000000);
    436     t->tv_usec = ((int)(now.ul % 10000000)) / 10;
    437 #else
    438     gettimeofday(t, NULL);
    439 #endif
    440 }
    441 
    442 #define LISTEN_SUCCESS              2
    443 #define LISTEN_SEND_VERIFY_REQUEST  1
    444 
    445 #ifndef OPENSSL_NO_SOCK
    446 int DTLSv1_listen(SSL *s, BIO_ADDR *client)
    447 {
    448     int next, n, ret = 0;
    449     unsigned char cookie[DTLS1_COOKIE_LENGTH];
    450     unsigned char seq[SEQ_NUM_SIZE];
    451     const unsigned char *data;
    452     unsigned char *buf, *wbuf;
    453     size_t fragoff, fraglen, msglen, reclen, align = 0;
    454     unsigned int rectype, versmajor, msgseq, msgtype, clientvers, cookielen;
    455     BIO *rbio, *wbio;
    456     BIO_ADDR *tmpclient = NULL;
    457     PACKET pkt, msgpkt, msgpayload, session, cookiepkt;
    458 
    459     if (s->handshake_func == NULL) {
    460         /* Not properly initialized yet */
    461         SSL_set_accept_state(s);
    462     }
    463 
    464     /* Ensure there is no state left over from a previous invocation */
    465     if (!SSL_clear(s))
    466         return -1;
    467 
    468     ERR_clear_error();
    469 
    470     rbio = SSL_get_rbio(s);
    471     wbio = SSL_get_wbio(s);
    472 
    473     if (!rbio || !wbio) {
    474         SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_BIO_NOT_SET);
    475         return -1;
    476     }
    477 
    478     /*
    479      * Note: This check deliberately excludes DTLS1_BAD_VER because that version
    480      * requires the MAC to be calculated *including* the first ClientHello
    481      * (without the cookie). Since DTLSv1_listen is stateless that cannot be
    482      * supported. DTLS1_BAD_VER must use cookies in a stateful manner (e.g. via
    483      * SSL_accept)
    484      */
    485     if ((s->version & 0xff00) != (DTLS1_VERSION & 0xff00)) {
    486         SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_UNSUPPORTED_SSL_VERSION);
    487         return -1;
    488     }
    489 
    490     if (!ssl3_setup_buffers(s)) {
    491         /* SSLerr already called */
    492         return -1;
    493     }
    494     buf = RECORD_LAYER_get_rbuf(&s->rlayer)->buf;
    495     wbuf = RECORD_LAYER_get_wbuf(&s->rlayer)[0].buf;
    496 #if defined(SSL3_ALIGN_PAYLOAD)
    497 # if SSL3_ALIGN_PAYLOAD != 0
    498     /*
    499      * Using SSL3_RT_HEADER_LENGTH here instead of DTLS1_RT_HEADER_LENGTH for
    500      * consistency with ssl3_read_n. In practice it should make no difference
    501      * for sensible values of SSL3_ALIGN_PAYLOAD because the difference between
    502      * SSL3_RT_HEADER_LENGTH and DTLS1_RT_HEADER_LENGTH is exactly 8
    503      */
    504     align = (size_t)buf + SSL3_RT_HEADER_LENGTH;
    505     align = SSL3_ALIGN_PAYLOAD - 1 - ((align - 1) % SSL3_ALIGN_PAYLOAD);
    506 # endif
    507 #endif
    508     buf += align;
    509 
    510     do {
    511         /* Get a packet */
    512 
    513         clear_sys_error();
    514         n = BIO_read(rbio, buf, SSL3_RT_MAX_PLAIN_LENGTH
    515                                 + DTLS1_RT_HEADER_LENGTH);
    516         if (n <= 0) {
    517             if (BIO_should_retry(rbio)) {
    518                 /* Non-blocking IO */
    519                 goto end;
    520             }
    521             return -1;
    522         }
    523 
    524         if (!PACKET_buf_init(&pkt, buf, n)) {
    525             SSLerr(SSL_F_DTLSV1_LISTEN, ERR_R_INTERNAL_ERROR);
    526             return -1;
    527         }
    528 
    529         /*
    530          * Parse the received record. If there are any problems with it we just
    531          * dump it - with no alert. RFC6347 says this "Unlike TLS, DTLS is
    532          * resilient in the face of invalid records (e.g., invalid formatting,
    533          * length, MAC, etc.).  In general, invalid records SHOULD be silently
    534          * discarded, thus preserving the association; however, an error MAY be
    535          * logged for diagnostic purposes."
    536          */
    537 
    538         /* this packet contained a partial record, dump it */
    539         if (n < DTLS1_RT_HEADER_LENGTH) {
    540             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_RECORD_TOO_SMALL);
    541             goto end;
    542         }
    543 
    544         if (s->msg_callback)
    545             s->msg_callback(0, 0, SSL3_RT_HEADER, buf,
    546                             DTLS1_RT_HEADER_LENGTH, s, s->msg_callback_arg);
    547 
    548         /* Get the record header */
    549         if (!PACKET_get_1(&pkt, &rectype)
    550             || !PACKET_get_1(&pkt, &versmajor)) {
    551             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_LENGTH_MISMATCH);
    552             goto end;
    553         }
    554 
    555         if (rectype != SSL3_RT_HANDSHAKE) {
    556             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_UNEXPECTED_MESSAGE);
    557             goto end;
    558         }
    559 
    560         /*
    561          * Check record version number. We only check that the major version is
    562          * the same.
    563          */
    564         if (versmajor != DTLS1_VERSION_MAJOR) {
    565             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_BAD_PROTOCOL_VERSION_NUMBER);
    566             goto end;
    567         }
    568 
    569         if (!PACKET_forward(&pkt, 1)
    570             /* Save the sequence number: 64 bits, with top 2 bytes = epoch */
    571             || !PACKET_copy_bytes(&pkt, seq, SEQ_NUM_SIZE)
    572             || !PACKET_get_length_prefixed_2(&pkt, &msgpkt)) {
    573             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_LENGTH_MISMATCH);
    574             goto end;
    575         }
    576         reclen = PACKET_remaining(&msgpkt);
    577         /*
    578          * We allow data remaining at the end of the packet because there could
    579          * be a second record (but we ignore it)
    580          */
    581 
    582         /* This is an initial ClientHello so the epoch has to be 0 */
    583         if (seq[0] != 0 || seq[1] != 0) {
    584             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_UNEXPECTED_MESSAGE);
    585             goto end;
    586         }
    587 
    588         /* Get a pointer to the raw message for the later callback */
    589         data = PACKET_data(&msgpkt);
    590 
    591         /* Finished processing the record header, now process the message */
    592         if (!PACKET_get_1(&msgpkt, &msgtype)
    593             || !PACKET_get_net_3_len(&msgpkt, &msglen)
    594             || !PACKET_get_net_2(&msgpkt, &msgseq)
    595             || !PACKET_get_net_3_len(&msgpkt, &fragoff)
    596             || !PACKET_get_net_3_len(&msgpkt, &fraglen)
    597             || !PACKET_get_sub_packet(&msgpkt, &msgpayload, fraglen)
    598             || PACKET_remaining(&msgpkt) != 0) {
    599             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_LENGTH_MISMATCH);
    600             goto end;
    601         }
    602 
    603         if (msgtype != SSL3_MT_CLIENT_HELLO) {
    604             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_UNEXPECTED_MESSAGE);
    605             goto end;
    606         }
    607 
    608         /* Message sequence number can only be 0 or 1 */
    609         if (msgseq > 2) {
    610             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_INVALID_SEQUENCE_NUMBER);
    611             goto end;
    612         }
    613 
    614         /*
    615          * We don't support fragment reassembly for ClientHellos whilst
    616          * listening because that would require server side state (which is
    617          * against the whole point of the ClientHello/HelloVerifyRequest
    618          * mechanism). Instead we only look at the first ClientHello fragment
    619          * and require that the cookie must be contained within it.
    620          */
    621         if (fragoff != 0 || fraglen > msglen) {
    622             /* Non initial ClientHello fragment (or bad fragment) */
    623             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_FRAGMENTED_CLIENT_HELLO);
    624             goto end;
    625         }
    626 
    627         if (s->msg_callback)
    628             s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, data,
    629                             fraglen + DTLS1_HM_HEADER_LENGTH, s,
    630                             s->msg_callback_arg);
    631 
    632         if (!PACKET_get_net_2(&msgpayload, &clientvers)) {
    633             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_LENGTH_MISMATCH);
    634             goto end;
    635         }
    636 
    637         /*
    638          * Verify client version is supported
    639          */
    640         if (DTLS_VERSION_LT(clientvers, (unsigned int)s->method->version) &&
    641             s->method->version != DTLS_ANY_VERSION) {
    642             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_WRONG_VERSION_NUMBER);
    643             goto end;
    644         }
    645 
    646         if (!PACKET_forward(&msgpayload, SSL3_RANDOM_SIZE)
    647             || !PACKET_get_length_prefixed_1(&msgpayload, &session)
    648             || !PACKET_get_length_prefixed_1(&msgpayload, &cookiepkt)) {
    649             /*
    650              * Could be malformed or the cookie does not fit within the initial
    651              * ClientHello fragment. Either way we can't handle it.
    652              */
    653             SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_LENGTH_MISMATCH);
    654             goto end;
    655         }
    656 
    657         /*
    658          * Check if we have a cookie or not. If not we need to send a
    659          * HelloVerifyRequest.
    660          */
    661         if (PACKET_remaining(&cookiepkt) == 0) {
    662             next = LISTEN_SEND_VERIFY_REQUEST;
    663         } else {
    664             /*
    665              * We have a cookie, so lets check it.
    666              */
    667             if (s->ctx->app_verify_cookie_cb == NULL) {
    668                 SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_NO_VERIFY_COOKIE_CALLBACK);
    669                 /* This is fatal */
    670                 return -1;
    671             }
    672             if (s->ctx->app_verify_cookie_cb(s, PACKET_data(&cookiepkt),
    673                     (unsigned int)PACKET_remaining(&cookiepkt)) == 0) {
    674                 /*
    675                  * We treat invalid cookies in the same was as no cookie as
    676                  * per RFC6347
    677                  */
    678                 next = LISTEN_SEND_VERIFY_REQUEST;
    679             } else {
    680                 /* Cookie verification succeeded */
    681                 next = LISTEN_SUCCESS;
    682             }
    683         }
    684 
    685         if (next == LISTEN_SEND_VERIFY_REQUEST) {
    686             WPACKET wpkt;
    687             unsigned int version;
    688             size_t wreclen;
    689 
    690             /*
    691              * There was no cookie in the ClientHello so we need to send a
    692              * HelloVerifyRequest. If this fails we do not worry about trying
    693              * to resend, we just drop it.
    694              */
    695 
    696             /* Generate the cookie */
    697             if (s->ctx->app_gen_cookie_cb == NULL ||
    698                 s->ctx->app_gen_cookie_cb(s, cookie, &cookielen) == 0 ||
    699                 cookielen > 255) {
    700                 SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_COOKIE_GEN_CALLBACK_FAILURE);
    701                 /* This is fatal */
    702                 return -1;
    703             }
    704 
    705             /*
    706              * Special case: for hello verify request, client version 1.0 and we
    707              * haven't decided which version to use yet send back using version
    708              * 1.0 header: otherwise some clients will ignore it.
    709              */
    710             version = (s->method->version == DTLS_ANY_VERSION) ? DTLS1_VERSION
    711                                                                : s->version;
    712 
    713             /* Construct the record and message headers */
    714             if (!WPACKET_init_static_len(&wpkt,
    715                                          wbuf,
    716                                          ssl_get_max_send_fragment(s)
    717                                          + DTLS1_RT_HEADER_LENGTH,
    718                                          0)
    719                     || !WPACKET_put_bytes_u8(&wpkt, SSL3_RT_HANDSHAKE)
    720                     || !WPACKET_put_bytes_u16(&wpkt, version)
    721                        /*
    722                         * Record sequence number is always the same as in the
    723                         * received ClientHello
    724                         */
    725                     || !WPACKET_memcpy(&wpkt, seq, SEQ_NUM_SIZE)
    726                        /* End of record, start sub packet for message */
    727                     || !WPACKET_start_sub_packet_u16(&wpkt)
    728                        /* Message type */
    729                     || !WPACKET_put_bytes_u8(&wpkt,
    730                                              DTLS1_MT_HELLO_VERIFY_REQUEST)
    731                        /*
    732                         * Message length - doesn't follow normal TLS convention:
    733                         * the length isn't the last thing in the message header.
    734                         * We'll need to fill this in later when we know the
    735                         * length. Set it to zero for now
    736                         */
    737                     || !WPACKET_put_bytes_u24(&wpkt, 0)
    738                        /*
    739                         * Message sequence number is always 0 for a
    740                         * HelloVerifyRequest
    741                         */
    742                     || !WPACKET_put_bytes_u16(&wpkt, 0)
    743                        /*
    744                         * We never fragment a HelloVerifyRequest, so fragment
    745                         * offset is 0
    746                         */
    747                     || !WPACKET_put_bytes_u24(&wpkt, 0)
    748                        /*
    749                         * Fragment length is the same as message length, but
    750                         * this *is* the last thing in the message header so we
    751                         * can just start a sub-packet. No need to come back
    752                         * later for this one.
    753                         */
    754                     || !WPACKET_start_sub_packet_u24(&wpkt)
    755                        /* Create the actual HelloVerifyRequest body */
    756                     || !dtls_raw_hello_verify_request(&wpkt, cookie, cookielen)
    757                        /* Close message body */
    758                     || !WPACKET_close(&wpkt)
    759                        /* Close record body */
    760                     || !WPACKET_close(&wpkt)
    761                     || !WPACKET_get_total_written(&wpkt, &wreclen)
    762                     || !WPACKET_finish(&wpkt)) {
    763                 SSLerr(SSL_F_DTLSV1_LISTEN, ERR_R_INTERNAL_ERROR);
    764                 WPACKET_cleanup(&wpkt);
    765                 /* This is fatal */
    766                 return -1;
    767             }
    768 
    769             /*
    770              * Fix up the message len in the message header. Its the same as the
    771              * fragment len which has been filled in by WPACKET, so just copy
    772              * that. Destination for the message len is after the record header
    773              * plus one byte for the message content type. The source is the
    774              * last 3 bytes of the message header
    775              */
    776             memcpy(&wbuf[DTLS1_RT_HEADER_LENGTH + 1],
    777                    &wbuf[DTLS1_RT_HEADER_LENGTH + DTLS1_HM_HEADER_LENGTH - 3],
    778                    3);
    779 
    780             if (s->msg_callback)
    781                 s->msg_callback(1, 0, SSL3_RT_HEADER, buf,
    782                                 DTLS1_RT_HEADER_LENGTH, s, s->msg_callback_arg);
    783 
    784             if ((tmpclient = BIO_ADDR_new()) == NULL) {
    785                 SSLerr(SSL_F_DTLSV1_LISTEN, ERR_R_MALLOC_FAILURE);
    786                 goto end;
    787             }
    788 
    789             /*
    790              * This is unnecessary if rbio and wbio are one and the same - but
    791              * maybe they're not. We ignore errors here - some BIOs do not
    792              * support this.
    793              */
    794             if (BIO_dgram_get_peer(rbio, tmpclient) > 0) {
    795                 (void)BIO_dgram_set_peer(wbio, tmpclient);
    796             }
    797             BIO_ADDR_free(tmpclient);
    798             tmpclient = NULL;
    799 
    800             /* TODO(size_t): convert this call */
    801             if (BIO_write(wbio, wbuf, wreclen) < (int)wreclen) {
    802                 if (BIO_should_retry(wbio)) {
    803                     /*
    804                      * Non-blocking IO...but we're stateless, so we're just
    805                      * going to drop this packet.
    806                      */
    807                     goto end;
    808                 }
    809                 return -1;
    810             }
    811 
    812             if (BIO_flush(wbio) <= 0) {
    813                 if (BIO_should_retry(wbio)) {
    814                     /*
    815                      * Non-blocking IO...but we're stateless, so we're just
    816                      * going to drop this packet.
    817                      */
    818                     goto end;
    819                 }
    820                 return -1;
    821             }
    822         }
    823     } while (next != LISTEN_SUCCESS);
    824 
    825     /*
    826      * Set expected sequence numbers to continue the handshake.
    827      */
    828     s->d1->handshake_read_seq = 1;
    829     s->d1->handshake_write_seq = 1;
    830     s->d1->next_handshake_write_seq = 1;
    831     DTLS_RECORD_LAYER_set_write_sequence(&s->rlayer, seq);
    832 
    833     /*
    834      * We are doing cookie exchange, so make sure we set that option in the
    835      * SSL object
    836      */
    837     SSL_set_options(s, SSL_OP_COOKIE_EXCHANGE);
    838 
    839     /*
    840      * Tell the state machine that we've done the initial hello verify
    841      * exchange
    842      */
    843     ossl_statem_set_hello_verify_done(s);
    844 
    845     /*
    846      * Some BIOs may not support this. If we fail we clear the client address
    847      */
    848     if (BIO_dgram_get_peer(rbio, client) <= 0)
    849         BIO_ADDR_clear(client);
    850 
    851     /* Buffer the record in the processed_rcds queue */
    852     if (!dtls_buffer_listen_record(s, reclen, seq, align))
    853         return -1;
    854 
    855     ret = 1;
    856  end:
    857     BIO_ADDR_free(tmpclient);
    858     return ret;
    859 }
    860 #endif
    861 
    862 static int dtls1_handshake_write(SSL *s)
    863 {
    864     return dtls1_do_write(s, SSL3_RT_HANDSHAKE);
    865 }
    866 
    867 int dtls1_shutdown(SSL *s)
    868 {
    869     int ret;
    870 #ifndef OPENSSL_NO_SCTP
    871     BIO *wbio;
    872 
    873     wbio = SSL_get_wbio(s);
    874     if (wbio != NULL && BIO_dgram_is_sctp(wbio) &&
    875         !(s->shutdown & SSL_SENT_SHUTDOWN)) {
    876         ret = BIO_dgram_sctp_wait_for_dry(wbio);
    877         if (ret < 0)
    878             return -1;
    879 
    880         if (ret == 0)
    881             BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 1,
    882                      NULL);
    883     }
    884 #endif
    885     ret = ssl3_shutdown(s);
    886 #ifndef OPENSSL_NO_SCTP
    887     BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 0, NULL);
    888 #endif
    889     return ret;
    890 }
    891 
    892 int dtls1_query_mtu(SSL *s)
    893 {
    894     if (s->d1->link_mtu) {
    895         s->d1->mtu =
    896             s->d1->link_mtu - BIO_dgram_get_mtu_overhead(SSL_get_wbio(s));
    897         s->d1->link_mtu = 0;
    898     }
    899 
    900     /* AHA!  Figure out the MTU, and stick to the right size */
    901     if (s->d1->mtu < dtls1_min_mtu(s)) {
    902         if (!(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) {
    903             s->d1->mtu =
    904                 BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_QUERY_MTU, 0, NULL);
    905 
    906             /*
    907              * I've seen the kernel return bogus numbers when it doesn't know
    908              * (initial write), so just make sure we have a reasonable number
    909              */
    910             if (s->d1->mtu < dtls1_min_mtu(s)) {
    911                 /* Set to min mtu */
    912                 s->d1->mtu = dtls1_min_mtu(s);
    913                 BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SET_MTU,
    914                          (long)s->d1->mtu, NULL);
    915             }
    916         } else
    917             return 0;
    918     }
    919     return 1;
    920 }
    921 
    922 static size_t dtls1_link_min_mtu(void)
    923 {
    924     return (g_probable_mtu[(sizeof(g_probable_mtu) /
    925                             sizeof(g_probable_mtu[0])) - 1]);
    926 }
    927 
    928 size_t dtls1_min_mtu(SSL *s)
    929 {
    930     return dtls1_link_min_mtu() - BIO_dgram_get_mtu_overhead(SSL_get_wbio(s));
    931 }
    932 
    933 size_t DTLS_get_data_mtu(const SSL *s)
    934 {
    935     size_t mac_overhead, int_overhead, blocksize, ext_overhead;
    936     const SSL_CIPHER *ciph = SSL_get_current_cipher(s);
    937     size_t mtu = s->d1->mtu;
    938 
    939     if (ciph == NULL)
    940         return 0;
    941 
    942     if (!ssl_cipher_get_overhead(ciph, &mac_overhead, &int_overhead,
    943                                  &blocksize, &ext_overhead))
    944         return 0;
    945 
    946     if (SSL_READ_ETM(s))
    947         ext_overhead += mac_overhead;
    948     else
    949         int_overhead += mac_overhead;
    950 
    951     /* Subtract external overhead (e.g. IV/nonce, separate MAC) */
    952     if (ext_overhead + DTLS1_RT_HEADER_LENGTH >= mtu)
    953         return 0;
    954     mtu -= ext_overhead + DTLS1_RT_HEADER_LENGTH;
    955 
    956     /* Round encrypted payload down to cipher block size (for CBC etc.)
    957      * No check for overflow since 'mtu % blocksize' cannot exceed mtu. */
    958     if (blocksize)
    959         mtu -= (mtu % blocksize);
    960 
    961     /* Subtract internal overhead (e.g. CBC padding len byte) */
    962     if (int_overhead >= mtu)
    963         return 0;
    964     mtu -= int_overhead;
    965 
    966     return mtu;
    967 }
    968 
    969 void DTLS_set_timer_cb(SSL *s, DTLS_timer_cb cb)
    970 {
    971     s->d1->timer_cb = cb;
    972 }
    973