1 #! /usr/bin/env perl 2 # Copyright 2015-2022 The OpenSSL Project Authors. All Rights Reserved. 3 # 4 # Licensed under the OpenSSL license (the "License"). You may not use 5 # this file except in compliance with the License. You can obtain a copy 6 # in the file LICENSE in the source distribution or at 7 # https://www.openssl.org/source/license.html 8 9 10 use strict; 11 use warnings; 12 13 use File::Basename; 14 use File::Compare qw/compare_text/; 15 use OpenSSL::Glob; 16 use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file/; 17 use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/; 18 19 setup("test_ssl_new"); 20 21 $ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs"); 22 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf"); 23 24 my @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.conf.in")); 25 map { s/;.*// } @conf_srcs if $^O eq "VMS"; 26 my @conf_files = map { basename($_, ".in") } @conf_srcs; 27 map { s/\^// } @conf_files if $^O eq "VMS"; 28 29 # We hard-code the number of tests to double-check that the globbing above 30 # finds all files as expected. 31 plan tests => 30; # = scalar @conf_srcs 32 33 # Some test results depend on the configuration of enabled protocols. We only 34 # verify generated sources in the default configuration. 35 my $is_default_tls = (disabled("ssl3") && !disabled("tls1") && 36 !disabled("tls1_1") && !disabled("tls1_2") && 37 !disabled("tls1_3")); 38 39 my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2")); 40 41 my @all_pre_tls1_3 = ("ssl3", "tls1", "tls1_1", "tls1_2"); 42 my $no_tls = alldisabled(available_protocols("tls")); 43 my $no_tls_below1_3 = $no_tls || (disabled("tls1_2") && !disabled("tls1_3")); 44 my $no_pre_tls1_3 = alldisabled(@all_pre_tls1_3); 45 my $no_dtls = alldisabled(available_protocols("dtls")); 46 my $no_npn = disabled("nextprotoneg"); 47 my $no_ct = disabled("ct"); 48 my $no_ec = disabled("ec"); 49 my $no_dh = disabled("dh"); 50 my $no_dsa = disabled("dsa"); 51 my $no_ec2m = disabled("ec2m"); 52 my $no_ocsp = disabled("ocsp"); 53 54 # Add your test here if the test conf.in generates test cases and/or 55 # expectations dynamically based on the OpenSSL compile-time config. 56 my %conf_dependent_tests = ( 57 "02-protocol-version.conf" => !$is_default_tls, 58 "04-client_auth.conf" => !$is_default_tls || !$is_default_dtls 59 || !disabled("sctp"), 60 "05-sni.conf" => disabled("tls1_1"), 61 "07-dtls-protocol-version.conf" => !$is_default_dtls || !disabled("sctp"), 62 "10-resumption.conf" => !$is_default_tls, 63 "11-dtls_resumption.conf" => !$is_default_dtls || !disabled("sctp"), 64 "16-dtls-certstatus.conf" => !$is_default_dtls || !disabled("sctp"), 65 "17-renegotiate.conf" => disabled("tls1_2"), 66 "18-dtls-renegotiate.conf" => disabled("dtls1_2") || !disabled("sctp"), 67 "19-mac-then-encrypt.conf" => !$is_default_tls, 68 "20-cert-select.conf" => !$is_default_tls || $no_dh || $no_dsa, 69 "22-compression.conf" => !$is_default_tls, 70 "25-cipher.conf" => disabled("poly1305") || disabled("chacha"), 71 "27-ticket-appdata.conf" => !$is_default_tls, 72 "28-seclevel.conf" => disabled("tls1_2") || $no_ec, 73 "30-supported-groups.conf" => disabled("tls1_2") || disabled("tls1_3") 74 || $no_ec || $no_ec2m 75 ); 76 77 # Add your test here if it should be skipped for some compile-time 78 # configurations. Default is $no_tls but some tests have different skip 79 # conditions. 80 my %skip = ( 81 "06-sni-ticket.conf" => $no_tls_below1_3, 82 "07-dtls-protocol-version.conf" => $no_dtls, 83 "08-npn.conf" => (disabled("tls1") && disabled("tls1_1") 84 && disabled("tls1_2")) || $no_npn, 85 "10-resumption.conf" => disabled("tls1_1") || disabled("tls1_2"), 86 "11-dtls_resumption.conf" => disabled("dtls1") || disabled("dtls1_2"), 87 "12-ct.conf" => $no_tls || $no_ct || $no_ec, 88 # We could run some of these tests without TLS 1.2 if we had a per-test 89 # disable instruction but that's a bizarre configuration not worth 90 # special-casing for. 91 # TODO(TLS 1.3): We should review this once we have TLS 1.3. 92 "13-fragmentation.conf" => disabled("tls1_2"), 93 "14-curves.conf" => disabled("tls1_2") || $no_ec || $no_ec2m, 94 "15-certstatus.conf" => $no_tls || $no_ocsp, 95 "16-dtls-certstatus.conf" => $no_dtls || $no_ocsp, 96 "17-renegotiate.conf" => $no_tls_below1_3, 97 "18-dtls-renegotiate.conf" => $no_dtls, 98 "19-mac-then-encrypt.conf" => $no_pre_tls1_3, 99 "20-cert-select.conf" => disabled("tls1_2") || $no_ec, 100 "21-key-update.conf" => disabled("tls1_3"), 101 "22-compression.conf" => disabled("zlib") || $no_tls, 102 "23-srp.conf" => (disabled("tls1") && disabled ("tls1_1") 103 && disabled("tls1_2")) || disabled("srp"), 104 "24-padding.conf" => disabled("tls1_3"), 105 "25-cipher.conf" => disabled("ec") || disabled("tls1_2"), 106 "26-tls13_client_auth.conf" => disabled("tls1_3"), 107 "29-dtls-sctp-label-bug.conf" => disabled("sctp") || disabled("sock"), 108 ); 109 110 foreach my $conf (@conf_files) { 111 subtest "Test configuration $conf" => sub { 112 test_conf($conf, 113 $conf_dependent_tests{$conf} || $^O eq "VMS" ? 0 : 1, 114 defined($skip{$conf}) ? $skip{$conf} : $no_tls); 115 } 116 } 117 118 sub test_conf { 119 plan tests => 3; 120 121 my ($conf, $check_source, $skip) = @_; 122 123 my $conf_file = srctop_file("test", "ssl-tests", $conf); 124 my $tmp_file = "${conf}.$$.tmp"; 125 my $run_test = 1; 126 127 SKIP: { 128 # "Test" 1. Generate the source. 129 my $input_file = $conf_file . ".in"; 130 131 skip 'failure', 2 unless 132 ok(run(perltest(["generate_ssl_tests.pl", $input_file], 133 interpreter_args => [ "-I", srctop_dir("util", "perl")], 134 stdout => $tmp_file)), 135 "Getting output from generate_ssl_tests.pl."); 136 137 SKIP: { 138 # Test 2. Compare against existing output in test/ssl_tests.conf. 139 skip "Skipping generated source test for $conf", 1 140 if !$check_source; 141 142 $run_test = is(cmp_text($tmp_file, $conf_file), 0, 143 "Comparing generated sources."); 144 } 145 146 # Test 3. Run the test. 147 skip "No tests available; skipping tests", 1 if $skip; 148 skip "Stale sources; skipping tests", 1 if !$run_test; 149 150 ok(run(test(["ssl_test", $tmp_file])), "running ssl_test $conf"); 151 } 152 153 unlink glob $tmp_file; 154 } 155 156 sub cmp_text { 157 return compare_text(@_, sub { 158 $_[0] =~ s/\R//g; 159 $_[1] =~ s/\R//g; 160 return $_[0] ne $_[1]; 161 }); 162 } 163
Indexes created Sat Feb 28 05:31:39 UTC 2026