OpenGrok

    1.15      is NetBSD/amiga _VER runs on any Amiga that has a 68020 or better CPU with
    1.14      is some form of MMU, and on 68060 DraCos.
    1.14      is
    1.15      is For 68020 and 68030 systems, a FPU is recommended but not required.
    1.15      is 68LC040, 68040V and 68LC060 systems don't work correctly at the moment.
     1.7  chopps
    1.11   veego The minimal configuration requires 4M of RAM and about 75M of disk
     1.7  chopps space.  To install the entire system requires much more disk space,
     1.7  chopps and to run X or compile the system, more RAM is recommended.  (4M of
     1.7  chopps RAM will actually allow you to compile, however it won't be speedy. X
     1.7  chopps really isn't usable on a 4M system.)
     1.1  chopps
     1.1  chopps Here is a table of recommended HD partition sizes for a full install:
     1.1  chopps 	partition:	advise,	with X,	needed,	with X
     1.9      is 	root (/)	20M	20M	15M	15M
1.17.2.1  mellon 	user (/usr)	95M	125M	75M 	105M
     1.1  chopps 	swap		----- 2M for every M ram -----
    1.15      is 	local (/usr/local)	up to you
     1.4     jtc
     1.1  chopps
     1.1  chopps As you may note the recommended size of /usr is 20M greater than
     1.7  chopps needed. This is to leave room for a kernel source and compile tree as
     1.7  chopps you will probably want to compile your own kernel. (GENERIC is large
     1.7  chopps and bulky to accommodate all people).
     1.1  chopps
     1.4     jtc If you only have 4M of fast memory, you should make your swap partition
     1.4     jtc larger, as your system will be doing much more swapping.
     1.4     jtc
     1.1  chopps Supported devices include:
     1.2  chopps 	A4000/A1200 IDE controller.
     1.1  chopps 	SCSI host adapters:
     1.7  chopps 		33c93 based boards: A2091, A3000 builtin and GVP series II.
     1.7  chopps 		53c80 based boards: 12 Gauge, IVS, Wordsync/Bytesync and
     1.7  chopps 		    Emplant.*)
     1.7  chopps 		53c710 based boards: A4091, Magnum, Warp Engine, Zeus
     1.7  chopps 		    and DraCo builtin.
    1.12      is 		FAS216 based SCSI boards: FastLane Z3, Blizzard I and II,
    1.16   veego 		    Blizzard IV, Blizzard 2060, CyberSCSI Mk I and II.
     1.1  chopps 	Video controllers:
     1.7  chopps 		ECS, AGA and A2024 built in on various Amigas.
     1.7  chopps 		Retina Z2, Retina Z3 and Altais.
    1.11   veego 		Cirrus CL GD 54xx based boards:
    1.11   veego 		    GVP Spectrum,
    1.11   veego 		    Picasso II, II+ and IV,
    1.11   veego 		    Piccolo and Piccolo SD64.
    1.11   veego 		Tseng ET4000 based boards:
    1.11   veego 		    Domino and Domino16M proto,
    1.11   veego 		    oMniBus,
    1.11   veego 		    Merlin.
     1.3  chopps 		A2410.
     1.4     jtc 		Cybervision 64.
1.17.2.3  mellon 		Cybervision 64/3D.
    1.13      is
    1.13      is 	Audio I/O:
    1.13      is 		Amiga builtin (currently 8bit-mode only)
    1.17      is 		Melody Mpeg-audio layer 2 board
    1.13      is
     1.1  chopps 	Ethernet controllers:
     1.1  chopps 		A2065 Ethernet
     1.3  chopps 		Hydra Ethernet
     1.3  chopps 		ASDG Ethernet
     1.3  chopps 		A4066 Ethernet
     1.3  chopps 		Ariadne Ethernet
     1.4     jtc 		Quicknet Ethernet
     1.7  chopps 	ARCnet controllers:
     1.7  chopps 		A2060 ARCnet
     1.1  chopps 	Tape drives:
     1.1  chopps 		Most SCSI tape drives, including
     1.1  chopps 			Archive Viper, Cipher SCSI-2 ST150.
     1.7  chopps 	Scanners:
     1.7  chopps 		SCSI-2 scanners behaving as SCSI-2 scanner devices,
1.17.2.2  mellon 		HP Scanjet II, Mustek SCSI scanner.***)
     1.1  chopps 	CD-ROM drives:
     1.1  chopps 		Most SCSI CD-ROM drives
     1.3  chopps 	Serial cards:
1.17.2.3  mellon 		HyperCom Z3 and HyperCom 4
     1.3  chopps 		MultiFaceCard II and III
     1.3  chopps 		A2232
     1.9      is 	Amiga floppy drives with Amiga (880/1760kB) and
1.17.2.2  mellon 		IBM (720/1440kB) encoding. ****)
     1.1  chopps 	Amiga parallel port.
     1.1  chopps 	Amiga serial port.
     1.1  chopps 	Amiga mouse.
    1.12      is 	DraCo serial port, including serial mouse.
    1.15      is 	DraCo parallel printer port.
    1.13      is 	Real-time clocks:
    1.13      is 		A2000, A3000, A4000 builtin (r/w),
    1.13      is 		DraCo builtin (r/o).
     1.1  chopps
     1.7  chopps If its not on the above lists, there is no support for it in this
     1.7  chopps release. Especially (but this is an incomplete list), there is no
     1.7  chopps driver for:
     1.7  chopps
    1.16   veego 	Blizzard III SCSI option, Cyberstorm Mk III SCSI option,
1.17.2.2  mellon 	Ferret SCSI, Oktagon SCSI.
     1.7  chopps
     1.7  chopps Known problems with some hardware:
     1.7  chopps
     1.7  chopps 	*) the Emplant SCSI adapter has been reported by a party to
     1.7  chopps 	hang after doing part of the installation without problems.
     1.7  chopps
1.17.2.2  mellon 	***) SCSI scanner support is machine independent, so it should
     1.7  chopps 	work, but hasn't been tested yet on most Amiga configurations.
    1.10      is 	There are reports that the Mustek and HP Scanjet hang if
     1.7  chopps 	accessed from the A3000. This might apply to other
     1.7  chopps 	33C93-Adapters, too.
     1.9      is
1.17.2.2  mellon 	****) Our floppy driver doesn't notice when mounted floppies are
     1.9      is 	write-protected at the moment. Your floppy will stay
     1.9      is 	unchanged, but you might not notice that you didn't write
    1.10      is 	anything due to the buffer cache. Also note that HD floppy
    1.10      is 	drives only get detected as such if a HD floppy is inserted at
    1.10      is 	boot time.