Note ACA500 support.

Note X-Surf 100 support.

Note Mediator PCI 4000 support.

Add X-Surf IDE.

branches: 1.52.2;
Update minimal requirements. Note Mediator PCI 1200 support.

Fix markup, sort SilverSurfer

Note clockport support and SilverSurfer driver.

branches: 1.49.2;
Add info about FastATA 1200

Add mppb man page to distrib lists, mention the new driver in install notes.

Mention Amiga PCI support in CHANGES and installation notes. Approved by phx.

Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

branches: 1.45.26; 1.45.34; 1.45.36;
Clarify Apollo-accelerator-modifed-mainboard-SCSI vs.
Apollo-accelerator-provided-SCSI support status.

branches: 1.44.2;
clean up whitespace, formatting, copyrights

branches: 1.43.2;
remove extraneous ".bullet)" which prevented compilation.

Added repulse audio board.

Minor spelling fix. s/accellerator/accelerator/

Add some omissions.

We really need a MMU. Tell people what models don't have any out of the box.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

My src tree wasn't completely up-to-date when I measured the current
syssrc size. Correct it.

Adapt size table to bigger /usr and /usr/src.

branches: 1.34.4;
Mention initial support of X-surf boards (Ethernet port).

branches: 1.33.4;
- we support the parallel HyperCom[34]+ ports now.
- while we're here, fix table formatting.

Adapt minimum memory and disk requirements to reality:
- due to a pmap bug, really low memory booting doesn't work
- NetBSD-1.4 needs much more disk than earlier releases.

Add the HyperCom 3+ and 4+ Zorro bus boards to the list of supported devices.

new version number syntax due to new formatting;
yet another release...

branches: 1.29.2;
Update: CS MK III/PPC scsi, ATAPI; mention no-Xserver for Retina Z2 and
A2410.

Markup for -mdoc and -mdoc2html.

Add the Ariadne II to the supported device list.

Mention that Apollo3060-reworked Amiga 3000 SCSI is supported now.

It's "HyperCOM 3Z", not "HyperCom Z3".

Clarify description of FPU emulation and A2232 support, the latter on
request of PR 5226 by Eric Delcamp.

Remove the comment about a know problem with the Ariadne ethernet card,
because the problem is fixed.

Warn about possible Ariadne problem.

RCS Id Police.

Add some missing devices:
- cv64/3d in ZorroII mode
- Melody, HyperCom in the HTML file

Increase the recommended size of the /usr partition and rewrite the
comment for the CyberVision64/3D after the Console mode works now.

update for the cv64/3d and the hypercom 3 and 4.

branches: 1.17.2;
Mention Melody board.

Update the supported hardware.

Update.

Note the addition of FPU emulation.

Note the addition of Amiga audio and DraCo RTC, and the availability (although
since long time) of A2000/A3000/A4000 RTC.

Updates; from my recent netbsd-1.2D snapshooting efforts.

Updated for new cirrus and et4000 boards and increase the /usr size.

Some corrections (mostly typos) by Thorsten Frueauf (PR 3315).

- increase the / and /usr recommended partition sizes by 5 MB for
crash dumps and the increased kernel source size, respectively
- mention the newly available IBM (720/1440k) floppy encoding and the
floppy driver write-protect bug.

Mention 4 graphics boards which we forgot. (Twice Mea Culpa --- I
integrated the drivers long time ago, and I was supposed to check the
INSTALL few days ago)

update notes from release branch and clean up a little

branches: 1.6.4;
We don't support 68060 cpu's yet, so explicitly talk about 020+030+040.

Fixed typo. Closes PR #2000.

merge in changes from 1.1 release branch

branches: 1.3.2;
update from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

various small fixes.

branches: 1.1.2;
install document parts for amiga arch.

Note ACA500 support.

Note X-Surf 100 support.

Note Mediator PCI 4000 support.

Add X-Surf IDE.

branches: 1.52.2;
Update minimal requirements. Note Mediator PCI 1200 support.

Fix markup, sort SilverSurfer

Note clockport support and SilverSurfer driver.

branches: 1.49.2;
Add info about FastATA 1200

Add mppb man page to distrib lists, mention the new driver in install notes.

Mention Amiga PCI support in CHANGES and installation notes. Approved by phx.

Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

branches: 1.45.26; 1.45.34; 1.45.36;
Clarify Apollo-accelerator-modifed-mainboard-SCSI vs.
Apollo-accelerator-provided-SCSI support status.

branches: 1.44.2;
clean up whitespace, formatting, copyrights

branches: 1.43.2;
remove extraneous ".bullet)" which prevented compilation.

Added repulse audio board.

Minor spelling fix. s/accellerator/accelerator/

Add some omissions.

We really need a MMU. Tell people what models don't have any out of the box.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

My src tree wasn't completely up-to-date when I measured the current
syssrc size. Correct it.

Adapt size table to bigger /usr and /usr/src.

branches: 1.34.4;
Mention initial support of X-surf boards (Ethernet port).

branches: 1.33.4;
- we support the parallel HyperCom[34]+ ports now.
- while we're here, fix table formatting.

Adapt minimum memory and disk requirements to reality:
- due to a pmap bug, really low memory booting doesn't work
- NetBSD-1.4 needs much more disk than earlier releases.

Add the HyperCom 3+ and 4+ Zorro bus boards to the list of supported devices.

new version number syntax due to new formatting;
yet another release...

branches: 1.29.2;
Update: CS MK III/PPC scsi, ATAPI; mention no-Xserver for Retina Z2 and
A2410.

Markup for -mdoc and -mdoc2html.

Add the Ariadne II to the supported device list.

Mention that Apollo3060-reworked Amiga 3000 SCSI is supported now.

It's "HyperCOM 3Z", not "HyperCom Z3".

Clarify description of FPU emulation and A2232 support, the latter on
request of PR 5226 by Eric Delcamp.

Remove the comment about a know problem with the Ariadne ethernet card,
because the problem is fixed.

Warn about possible Ariadne problem.

RCS Id Police.

Add some missing devices:
- cv64/3d in ZorroII mode
- Melody, HyperCom in the HTML file

Increase the recommended size of the /usr partition and rewrite the
comment for the CyberVision64/3D after the Console mode works now.

update for the cv64/3d and the hypercom 3 and 4.

branches: 1.17.2;
Mention Melody board.

Update the supported hardware.

Update.

Note the addition of FPU emulation.

Note the addition of Amiga audio and DraCo RTC, and the availability (although
since long time) of A2000/A3000/A4000 RTC.

Updates; from my recent netbsd-1.2D snapshooting efforts.

Updated for new cirrus and et4000 boards and increase the /usr size.

Some corrections (mostly typos) by Thorsten Frueauf (PR 3315).

- increase the / and /usr recommended partition sizes by 5 MB for
crash dumps and the increased kernel source size, respectively
- mention the newly available IBM (720/1440k) floppy encoding and the
floppy driver write-protect bug.

Mention 4 graphics boards which we forgot. (Twice Mea Culpa --- I
integrated the drivers long time ago, and I was supposed to check the
INSTALL few days ago)

update notes from release branch and clean up a little

branches: 1.6.4;
We don't support 68060 cpu's yet, so explicitly talk about 020+030+040.

Fixed typo. Closes PR #2000.

merge in changes from 1.1 release branch

branches: 1.3.2;
update from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

various small fixes.

branches: 1.1.2;
install document parts for amiga arch.

Note ACA500 support.

Note X-Surf 100 support.

Note Mediator PCI 4000 support.

Add X-Surf IDE.

branches: 1.52.2;
Update minimal requirements. Note Mediator PCI 1200 support.

Fix markup, sort SilverSurfer

Note clockport support and SilverSurfer driver.

branches: 1.49.2;
Add info about FastATA 1200

Add mppb man page to distrib lists, mention the new driver in install notes.

Mention Amiga PCI support in CHANGES and installation notes. Approved by phx.

Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

branches: 1.45.26; 1.45.34; 1.45.36;
Clarify Apollo-accelerator-modifed-mainboard-SCSI vs.
Apollo-accelerator-provided-SCSI support status.

branches: 1.44.2;
clean up whitespace, formatting, copyrights

branches: 1.43.2;
remove extraneous ".bullet)" which prevented compilation.

Added repulse audio board.

Minor spelling fix. s/accellerator/accelerator/

Add some omissions.

We really need a MMU. Tell people what models don't have any out of the box.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

My src tree wasn't completely up-to-date when I measured the current
syssrc size. Correct it.

Adapt size table to bigger /usr and /usr/src.

branches: 1.34.4;
Mention initial support of X-surf boards (Ethernet port).

branches: 1.33.4;
- we support the parallel HyperCom[34]+ ports now.
- while we're here, fix table formatting.

Adapt minimum memory and disk requirements to reality:
- due to a pmap bug, really low memory booting doesn't work
- NetBSD-1.4 needs much more disk than earlier releases.

Add the HyperCom 3+ and 4+ Zorro bus boards to the list of supported devices.

new version number syntax due to new formatting;
yet another release...

branches: 1.29.2;
Update: CS MK III/PPC scsi, ATAPI; mention no-Xserver for Retina Z2 and
A2410.

Markup for -mdoc and -mdoc2html.

Add the Ariadne II to the supported device list.

Mention that Apollo3060-reworked Amiga 3000 SCSI is supported now.

It's "HyperCOM 3Z", not "HyperCom Z3".

Clarify description of FPU emulation and A2232 support, the latter on
request of PR 5226 by Eric Delcamp.

Remove the comment about a know problem with the Ariadne ethernet card,
because the problem is fixed.

Warn about possible Ariadne problem.

RCS Id Police.

Add some missing devices:
- cv64/3d in ZorroII mode
- Melody, HyperCom in the HTML file

Increase the recommended size of the /usr partition and rewrite the
comment for the CyberVision64/3D after the Console mode works now.

update for the cv64/3d and the hypercom 3 and 4.

branches: 1.17.2;
Mention Melody board.

Update the supported hardware.

Update.

Note the addition of FPU emulation.

Note the addition of Amiga audio and DraCo RTC, and the availability (although
since long time) of A2000/A3000/A4000 RTC.

Updates; from my recent netbsd-1.2D snapshooting efforts.

Updated for new cirrus and et4000 boards and increase the /usr size.

Some corrections (mostly typos) by Thorsten Frueauf (PR 3315).

- increase the / and /usr recommended partition sizes by 5 MB for
crash dumps and the increased kernel source size, respectively
- mention the newly available IBM (720/1440k) floppy encoding and the
floppy driver write-protect bug.

Mention 4 graphics boards which we forgot. (Twice Mea Culpa --- I
integrated the drivers long time ago, and I was supposed to check the
INSTALL few days ago)

update notes from release branch and clean up a little

branches: 1.6.4;
We don't support 68060 cpu's yet, so explicitly talk about 020+030+040.

Fixed typo. Closes PR #2000.

merge in changes from 1.1 release branch

branches: 1.3.2;
update from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

various small fixes.

branches: 1.1.2;
install document parts for amiga arch.

Note ACA500 support.

Note X-Surf 100 support.

Note Mediator PCI 4000 support.

Add X-Surf IDE.

branches: 1.52.2;
Update minimal requirements. Note Mediator PCI 1200 support.

Fix markup, sort SilverSurfer

Note clockport support and SilverSurfer driver.

branches: 1.49.2;
Add info about FastATA 1200

Add mppb man page to distrib lists, mention the new driver in install notes.

Mention Amiga PCI support in CHANGES and installation notes. Approved by phx.

Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

branches: 1.45.26; 1.45.34; 1.45.36;
Clarify Apollo-accelerator-modifed-mainboard-SCSI vs.
Apollo-accelerator-provided-SCSI support status.

branches: 1.44.2;
clean up whitespace, formatting, copyrights

branches: 1.43.2;
remove extraneous ".bullet)" which prevented compilation.

Added repulse audio board.

Minor spelling fix. s/accellerator/accelerator/

Add some omissions.

We really need a MMU. Tell people what models don't have any out of the box.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

My src tree wasn't completely up-to-date when I measured the current
syssrc size. Correct it.

Adapt size table to bigger /usr and /usr/src.

branches: 1.34.4;
Mention initial support of X-surf boards (Ethernet port).

branches: 1.33.4;
- we support the parallel HyperCom[34]+ ports now.
- while we're here, fix table formatting.

Adapt minimum memory and disk requirements to reality:
- due to a pmap bug, really low memory booting doesn't work
- NetBSD-1.4 needs much more disk than earlier releases.

Add the HyperCom 3+ and 4+ Zorro bus boards to the list of supported devices.

new version number syntax due to new formatting;
yet another release...

branches: 1.29.2;
Update: CS MK III/PPC scsi, ATAPI; mention no-Xserver for Retina Z2 and
A2410.

Markup for -mdoc and -mdoc2html.

Add the Ariadne II to the supported device list.

Mention that Apollo3060-reworked Amiga 3000 SCSI is supported now.

It's "HyperCOM 3Z", not "HyperCom Z3".

Clarify description of FPU emulation and A2232 support, the latter on
request of PR 5226 by Eric Delcamp.

Remove the comment about a know problem with the Ariadne ethernet card,
because the problem is fixed.

Warn about possible Ariadne problem.

RCS Id Police.

Add some missing devices:
- cv64/3d in ZorroII mode
- Melody, HyperCom in the HTML file

Increase the recommended size of the /usr partition and rewrite the
comment for the CyberVision64/3D after the Console mode works now.

update for the cv64/3d and the hypercom 3 and 4.

branches: 1.17.2;
Mention Melody board.

Update the supported hardware.

Update.

Note the addition of FPU emulation.

Note the addition of Amiga audio and DraCo RTC, and the availability (although
since long time) of A2000/A3000/A4000 RTC.

Updates; from my recent netbsd-1.2D snapshooting efforts.

Updated for new cirrus and et4000 boards and increase the /usr size.

Some corrections (mostly typos) by Thorsten Frueauf (PR 3315).

- increase the / and /usr recommended partition sizes by 5 MB for
crash dumps and the increased kernel source size, respectively
- mention the newly available IBM (720/1440k) floppy encoding and the
floppy driver write-protect bug.

Mention 4 graphics boards which we forgot. (Twice Mea Culpa --- I
integrated the drivers long time ago, and I was supposed to check the
INSTALL few days ago)

update notes from release branch and clean up a little

branches: 1.6.4;
We don't support 68060 cpu's yet, so explicitly talk about 020+030+040.

Fixed typo. Closes PR #2000.

merge in changes from 1.1 release branch

branches: 1.3.2;
update from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

various small fixes.

branches: 1.1.2;
install document parts for amiga arch.