Home | History | Annotate | Line # | Download | only in amiga
hardware revision 1.6.4.1 
      1  1.6.4.1      is NetBSD/amiga 1.2 runs on any amiga that has a 68020 or better CPU with
      2  1.6.4.1      is some form of FPU and MMU, and on DraCos which still have a CIA.
      3  1.6.4.1      is 
      4  1.6.4.1      is The minimal configuration requires 4M of RAM and about 65M of disk
      5  1.6.4.1      is space.  To install the entire system requires much more disk space,
      6  1.6.4.1      is and to run X or compile the system, more RAM is recommended.  (4M of
      7  1.6.4.1      is RAM will actually allow you to compile, however it won't be speedy.  X
      8  1.6.4.1      is really isn't usable on a 4M system.)
      9      1.1  chopps 
     10      1.1  chopps Here is a table of recommended HD partition sizes for a full install:
     11      1.1  chopps 	partition:	advise,	with X,	needed,	with X
     12      1.1  chopps 	root (/)	15M	15M	10M	10M
     13      1.1  chopps 	user (/usr)	65M	100M	45M 	80M
     14      1.1  chopps 	swap		----- 2M for every M ram -----
     15      1.1  chopps 	local (/local)	up to you
     16      1.4     jtc 
     17      1.1  chopps 
     18      1.1  chopps As you may note the recommended size of /usr is 20M greater than
     19      1.2  chopps needed. This is to leave room for a kernel source and compile tree
     20      1.6      is as you will probably want to compile your own kernel. (GENERIC and
     21      1.6      is INSTALL are large and bulky to accommodate all people).
     22      1.1  chopps 
     23      1.4     jtc If you only have 4M of fast memory, you should make your swap partition
     24      1.4     jtc larger, as your system will be doing much more swapping.
     25      1.4     jtc 
     26      1.1  chopps Supported devices include:
     27      1.2  chopps 	A4000/A1200 IDE controller.
     28      1.1  chopps 	SCSI host adapters:
     29  1.6.4.1      is 		33c93 based boards: A2091, A3000 builtin and GVP series II.
     30  1.6.4.1      is 		53c80 based boards: 12 Gauge, IVS, Wordsync/Bytesync and 
     31  1.6.4.1      is 		    Emplant.
     32  1.6.4.1      is 		53c710 based boards: A4091, Magnum, Warp Engine, Zeus 
     33  1.6.4.1      is 		    and DraCo builtin.
     34  1.6.4.1      is 		FAS216 based boards: FastLane Z3, Blizzard I and II.
     35      1.1  chopps 	Video controllers:
     36      1.2  chopps 		ECS, AGA and A2024 built in on various amigas.
     37  1.6.4.1      is 		Retina Z2, Retina Z3 and Altais.
     38      1.3  chopps 		Picasso II.
     39      1.3  chopps 		GVP Spectrum.
     40      1.5    neil 		Piccolo.
     41      1.3  chopps 		A2410.
     42      1.4     jtc 		Cybervision 64.
     43      1.1  chopps 	Ethernet controllers:
     44      1.1  chopps 		A2065 Ethernet
     45      1.3  chopps 		Hydra Ethernet
     46      1.3  chopps 		ASDG Ethernet
     47      1.3  chopps 		A4066 Ethernet
     48      1.3  chopps 		Ariadne Ethernet
     49      1.4     jtc 		Quicknet Ethernet
     50      1.3  chopps 	Arcnet controllers:
     51      1.3  chopps 		A2060 Arcnet
     52      1.1  chopps 	Tape drives:
     53      1.1  chopps 		Most SCSI tape drives, including
     54      1.1  chopps 			Archive Viper, Cipher SCSI-2 ST150.
     55  1.6.4.1      is 	Scanners:
     56  1.6.4.1      is 		SCSI-2 scanners behaving as SCSI-2 scanner devices,
     57  1.6.4.1      is 		HP Scanjet II, Mustek SCSI scanner.
     58      1.1  chopps 	CD-ROM drives:
     59      1.1  chopps 		Most SCSI CD-ROM drives
     60      1.3  chopps 	Serial cards:
     61      1.3  chopps 		MultiFaceCard II and III
     62      1.3  chopps 		A2232
     63      1.1  chopps 	Amiga floppy drives.
     64      1.1  chopps 	Amiga parallel port.
     65      1.1  chopps 	Amiga serial port.
     66      1.1  chopps 	Amiga mouse.
     67      1.1  chopps 
     68      1.1  chopps If its not on this list, there is no support for it in this release.
     69