Home | History | Annotate | Line # | Download | only in etc 
      1 #	$NetBSD: gettytab,v 1.18 2006/01/08 22:23:46 dsl Exp $
      2 #	from: @(#)gettytab	8.2 (Berkeley) 4/20/94
      3 #
      4 # Most of the table entries here are just copies of the old getty table,
      5 # it is by no means certain, or even likely, that any of them are optimal
      6 # for any purpose whatever.  Nor is it likely that more than a couple are
      7 # even correct.
      8 #
      9 # The default gettytab entry, used to set defaults for all other
     10 # entries, and in cases where getty is called with no table name
     11 #
     12 default:\
     13 	:ce:ck:np:im=\r\n%s/%m (%h) (%t)\r\n\r\n:
     14 
     15 #
     16 # Fixed speed entries
     17 #
     18 #	The "std.NNN" names are known to the special case
     19 #	portselector code in getty, however they can
     20 #	be assigned to any table desired.
     21 #	The "NNN-baud" names are known to the special case
     22 #	autobaud code in getty, and likewise can
     23 #	be assigned to any table desired (hopefully the same speed).
     24 #
     25 std.110|110-baud:\
     26 	:sp#110:
     27 std.300|300-baud:\
     28 	:sp#300:
     29 std.600|600-baud:\
     30 	:sp#600:
     31 std.1200|1200-baud:\
     32 	:sp#1200:
     33 std.2400|2400-baud:\
     34 	:sp#2400:
     35 std.4800|4800-baud:\
     36 	:sp#4800:
     37 std.9600|9600-baud:\
     38 	:sp#9600:
     39 std.19200|19200-baud:\
     40 	:sp#19200:
     41 std.38400|38400-baud:\
     42 	:sp#38400:
     43 std.57600|57600-baud:\
     44 	:sp#57600:
     45 std.115200|115200-baud:\
     46 	:sp#115200:
     47 
     48 # PPP network link login
     49 #
     50 # these entries can be used by ISPs or others who want to be able
     51 # to offer both a "shell" and a PPP login on the same port. Setting
     52 # the "pp" attribute allows getty(8) to recognize a PPP link start
     53 # negotiation, and invoke the program listed, in addition to normal
     54 # login(1).
     55 #
     56 # N.B.: if PPP is recognized, this bypasses normal login/password
     57 # exchange; the expectation is that you'll configure pppd (or whatever)
     58 # to require a PAP or CHAP handshake for authentication after PPP is
     59 # started up.
     60 #
     61 # It is also recommended that you use hardware (CTS/RTS) flow control
     62 # on the port, and run the port as fast as possible, to allow modems
     63 # extra time to do data compression, if enabled.
     64 #
     65 ppp:np:ce:ck:pp=/usr/sbin/pppd:
     66 #
     67 ppp.19200|PPP-19200:sp#19200:tc=ppp:
     68 ppp.38400|PPP-38400:sp#38400:tc=ppp:
     69 ppp.57600|PPP-57600:sp#57600:tc=ppp:
     70 ppp.115200|PPP-115200:sp#115200:tc=ppp:
     71 ppp.230400|PPP-230400:sp#230400:tc=ppp:
     72 
     73 #
     74 # Dial in rotary tables, speed selection via 'break'
     75 #
     76 d1200|Dial-1200:\
     77 	:nx=d300:sp#1200:
     78 d300|Dial-300:\
     79 	:nx=d1200:sp#300:
     80 
     81 #
     82 # Fast dialup terminals, 2400/1200/300 rotary (can start either way)
     83 #
     84 D2400|d2400|Fast-Dial-2400:\
     85 	:nx=D1200:tc=2400-baud:
     86 D1200|Fast-Dial-1200:\
     87 	:nx=D300:tc=1200-baud:
     88 D300|Fast-Dial-300:\
     89 	:nx=D2400:tc=300-baud:
     90 
     91 #
     92 #telebit (19200)
     93 #
     94 t19200:\
     95 	:nx=t2400:tc=19200-baud:
     96 t2400:\
     97 	:nx=t1200:tc=2400-baud:
     98 t1200:\
     99 	:nx=t19200:tc=1200-baud:
    100 
    101 #
    102 #telebit (9600)
    103 #
    104 t9600:\
    105 	:nx=t2400a:tc=19200-baud:
    106 t2400a:\
    107 	:nx=t1200a:tc=2400-baud:
    108 t1200a:\
    109 	:nx=t9600:tc=1200-baud:
    110 
    111 #
    112 # Odd special case terminals
    113 #
    114 Console|Console Decwriter II:\
    115 	:rw:tc=300-baud:
    116 
    117 Console-1200|Console Decwriter III:\
    118 	:rw:tc=1200-baud:
    119 
    120 X|Xwindow|X window system:\
    121 	:rw:sp#9600:
    122 
    123 Pc|Pc console:\
    124 	:np:ig:ht:
    125 
    126 # 8 bit clean Sun console
    127 suncons|Sun Console:\
    128 	:np:sp#9600:
    129 
    130 #
    131 # Plugboard, and misc other terminals
    132 #
    133 plug-9600|Plugboard-9600:\
    134 	:pf#1:tc=9600-baud:
    135 P9600|Plugboard-9600-rotary:\
    136 	:pf#1:nx=P300:tc=9600-baud:
    137 P300|Plugboard-300:\
    138 	:pf#1:nx=P1200:tc=300-baud:
    139 P1200|Plugboard-1200:\
    140 	:pf#1:nx=P9600:tc=1200-baud:
    141 
    142 #
    143 # XXXX Port selector
    144 #
    145 DSW|Port Selector:\
    146 	:ps:sp#2400:
    147 
    148 #
    149 # Auto-baud speed detect entry for Micom 600.
    150 # Special code in getty will switch this out
    151 # to one of the NNN-baud entries.
    152 #
    153 Auto-baud:\
    154 	:ab:sp#2400:f0#040:
    155