xref: /src/etc/gettytab

#	$NetBSD: gettytab,v 1.18 2006/01/08 22:23:46 dsl Exp $
#	from: @(#)gettytab	8.2 (Berkeley) 4/20/94
#
# Most of the table entries here are just copies of the old getty table,
# it is by no means certain, or even likely, that any of them are optimal
# for any purpose whatever.  Nor is it likely that more than a couple are
# even correct.
#
# The default gettytab entry, used to set defaults for all other
# entries, and in cases where getty is called with no table name
#
default:\
	:ce:ck:np:im=\r\n%s/%m (%h) (%t)\r\n\r\n:

#
# Fixed speed entries
#
#	The "std.NNN" names are known to the special case
#	portselector code in getty, however they can
#	be assigned to any table desired.
#	The "NNN-baud" names are known to the special case
#	autobaud code in getty, and likewise can
#	be assigned to any table desired (hopefully the same speed).
#
std.110|110-baud:\
	:sp#110:
std.300|300-baud:\
	:sp#300:
std.600|600-baud:\
	:sp#600:
std.1200|1200-baud:\
	:sp#1200:
std.2400|2400-baud:\
	:sp#2400:
std.4800|4800-baud:\
	:sp#4800:
std.9600|9600-baud:\
	:sp#9600:
std.19200|19200-baud:\
	:sp#19200:
std.38400|38400-baud:\
	:sp#38400:
std.57600|57600-baud:\
	:sp#57600:
std.115200|115200-baud:\
	:sp#115200:

# PPP network link login
#
# these entries can be used by ISPs or others who want to be able
# to offer both a "shell" and a PPP login on the same port. Setting
# the "pp" attribute allows getty(8) to recognize a PPP link start
# negotiation, and invoke the program listed, in addition to normal
# login(1).
#
# N.B.: if PPP is recognized, this bypasses normal login/password
# exchange; the expectation is that you'll configure pppd (or whatever)
# to require a PAP or CHAP handshake for authentication after PPP is
# started up.
#
# It is also recommended that you use hardware (CTS/RTS) flow control
# on the port, and run the port as fast as possible, to allow modems
# extra time to do data compression, if enabled.
#
ppp:np:ce:ck:pp=/usr/sbin/pppd:
#
ppp.19200|PPP-19200:sp#19200:tc=ppp:
ppp.38400|PPP-38400:sp#38400:tc=ppp:
ppp.57600|PPP-57600:sp#57600:tc=ppp:
ppp.115200|PPP-115200:sp#115200:tc=ppp:
ppp.230400|PPP-230400:sp#230400:tc=ppp:

#
# Dial in rotary tables, speed selection via 'break'
#
d1200|Dial-1200:\
	:nx=d300:sp#1200:
d300|Dial-300:\
	:nx=d1200:sp#300:

#
# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
#
D2400|d2400|Fast-Dial-2400:\
	:nx=D1200:tc=2400-baud:
D1200|Fast-Dial-1200:\
	:nx=D300:tc=1200-baud:
D300|Fast-Dial-300:\
	:nx=D2400:tc=300-baud:

#
#telebit (19200)
#
t19200:\
	:nx=t2400:tc=19200-baud:
t2400:\
	:nx=t1200:tc=2400-baud:
t1200:\
	:nx=t19200:tc=1200-baud:

#
#telebit (9600)
#
t9600:\
	:nx=t2400a:tc=19200-baud:
t2400a:\
	:nx=t1200a:tc=2400-baud:
t1200a:\
	:nx=t9600:tc=1200-baud:

#
# Odd special case terminals
#
Console|Console Decwriter II:\
	:rw:tc=300-baud:

Console-1200|Console Decwriter III:\
	:rw:tc=1200-baud:

X|Xwindow|X window system:\
	:rw:sp#9600:

Pc|Pc console:\
	:np:ig:ht:

# 8 bit clean Sun console
suncons|Sun Console:\
	:np:sp#9600:

#
# Plugboard, and misc other terminals
#
plug-9600|Plugboard-9600:\
	:pf#1:tc=9600-baud:
P9600|Plugboard-9600-rotary:\
	:pf#1:nx=P300:tc=9600-baud:
P300|Plugboard-300:\
	:pf#1:nx=P1200:tc=300-baud:
P1200|Plugboard-1200:\
	:pf#1:nx=P9600:tc=1200-baud:

#
# XXXX Port selector
#
DSW|Port Selector:\
	:ps:sp#2400:

#
# Auto-baud speed detect entry for Micom 600.
# Special code in getty will switch this out
# to one of the NNN-baud entries.
#
Auto-baud:\
	:ab:sp#2400:f0#040: