Home | History | Annotate | Line # | Download | only in hints 
      1 Compilation:
      2 	Usual thing: rm -f Config.local ; make for vanilla
      3 			make refconf for reference clock (e. g. DCF77)
      4 
      5 Directory contents:
      6 
      7 	hints/PARSE	- this file
      8 
      9 	xntpd/refclock_parse.c
     10 			- reference clock support for DCF77/GPS in xntp
     11 	parse/parse.c
     12 			- Reference clock data parser framework
     13 	parse/parse_conf.c
     14 			- parser configuration (clock types)
     15 	parse/clk_meinberg.c
     16 			- Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)
     17 	parse/clk_schmid.c
     18 			- Schmid receiver (DCF77)
     19 	parse/clk_rawdcf.c
     20 			- 100/200ms pulses via 50 Baud line (DCF77)
     21 	parse/clk_dcf7000.c
     22 			- ELV DCF7000 (DCF77)
     23 	parse/clk_trimble.c
     24 			- Trimble SV6 GPS receiver
     25 
     26 			  If you want to add new clock types please check
     27 			  with kardel (a] informatik.uni-erlangen.de. These files
     28 			  implement the conversion of RS232 data streams into
     29 			  timing information used by refclock_parse.c which is
     30 			  mostly generic except for NTP configuration constants.
     31 
     32 	parse/Makefile.kernel
     33 			- *SIMPLE* makefile to build a loadable STREAMS
     34 			  module for SunOS 4.x / SunOS 5.x systems
     35 
     36 	parse/parsestreams.c
     37 			- SUN Streams module (loadable) for radio clocks
     38 			  This streams module is designed for SunOS 4.1.X.
     39 
     40 	parse/parsesolaris.c
     41 			- SUN Streams module (loadable) for radio clocks.
     42 			  This streams module is designed for SunOS 5.x
     43 			  Beware this is still new - so it might crash
     44 			  your machine (we have seen it working, though).
     45 
     46 	parse/parsetest.c
     47 			- simple test program for STREAMS module. Its so simple,
     48 			  that it doesn't even set TTY-modes, thus they got to
     49 			  be correct on startup - works for Meinberg receivers
     50 
     51 	parse/testdcf.c
     52 			- test program for raw DCF77 (100/200ms pulses)
     53 			  receivers
     54 
     55         include/parse.h - interface to "parse" module and more
     56         include/parse_conf.h
     57 			- interface to "parse" configuration
     58 
     59 	include/sys/parsestreams.h
     60 			- STREAMS specific definitions
     61 
     62 	scripts/support
     63 			- scripts (perl & sh) for statistics and rc startup
     64 			  the startup scripts are used in Erlangen for
     65 			  starting the daemon on a variety of Suns and HPs
     66 			  and for Reference Clock startup on Suns
     67 			  These scripts may or may not be helpful to you.
     68 
     69 Supported clocks:
     70 	Meinberg DCF U/A 31
     71 	Meinberg PZF535/TCXO	(Software revision PZFUERL 4.6)
     72 	Meinberg PZF535/OCXO	(Software revision PZFUERL 4.6)
     73 	Meinberg GPS166		(Software version for Uni-Erlangen)
     74 	ELV DCF7000		(not recommended - casual/emergency use only)
     75 	Conrad DCF77 receiver	(email: time (a] informatik.uni-erlangen.de)
     76 	  + level converter
     77 	TimeBrick		(email: time (a] informatik.uni-erlangen.de)
     78 	Schmid Receiver Kit
     79 	Trimble SV6 GPS receiver
     80 
     81 Addresses:
     82   Meinberg Funkuhren
     83   Auf der Landwehr 22
     84   31812 Bad Pyrmont
     85   Germany
     86   Tel.: 05281/20 18
     87   FAX:  05281/60 81 80
     88 
     89   ELV Kundenservice
     90   Postfach 1000
     91   26787 Leer
     92   Germany
     93   Tel.: 0491/60 08 88
     94 
     95   Walter Schmidt
     96   Eichwisrain 14
     97   8634 Hombrechtikon
     98   Switzerland
     99 
    100 If you have problems mail to:
    101 
    102 	time (a] informatik.uni-erlangen.de
    103 
    104 We'll help (conditions permitting)
    105 
    106