1 //Original:/proj/frio/dv/testcases/seq/se_misaligned_fetch/se_misaligned_fetch.dsp 2 // Description: attempt to fetch code from misaligned address 3 # mach: bfin 4 # sim: --environment operating 5 6 #include "test.h" 7 .include "testutils.inc" 8 start 9 10 // 11 // Constants and Defines 12 // 13 14 include(gen_int.inc) 15 include(selfcheck.inc) 16 include(std.inc) 17 include(symtable.inc) 18 19 #ifndef STACKSIZE 20 #define STACKSIZE 0x10 21 #endif 22 #ifndef EVT 23 #define EVT 0xFFE02000 24 #endif 25 #ifndef EVT15 26 #define EVT15 0xFFE0203C 27 #endif 28 #ifndef EVT_OVERRIDE 29 #define EVT_OVERRIDE 0xFFE02100 30 #endif 31 #ifndef ITABLE 32 #define ITABLE 0xF0000000 33 #endif 34 35 GEN_INT_INIT(ITABLE) // set location for interrupt table 36 37 // 38 // Reset/Bootstrap Code 39 // (Here we should set the processor operating modes, initialize registers, 40 // etc.) 41 // 42 43 BOOT: 44 INIT_R_REGS(0); // initialize general purpose regs 45 46 INIT_P_REGS(0); // initialize the pointers 47 48 INIT_I_REGS(0); // initialize the dsp address regs 49 INIT_M_REGS(0); 50 INIT_L_REGS(0); 51 INIT_B_REGS(0); 52 53 LD32_LABEL(sp, KSTACK); // setup the stack pointer 54 FP = SP; // and frame pointer 55 56 LD32(p0, EVT); // Setup Event Vectors and Handlers 57 58 CLI R0; // hold off nonmaskables while writing EVTs 59 60 LD32_LABEL(r0, EHANDLE); // Emulation Handler (Int0) 61 62 [ P0 ++ ] = R0; 63 64 LD32_LABEL(r0, RHANDLE); // Reset Handler (Int1) 65 [ P0 ++ ] = R0; 66 67 LD32_LABEL(r0, NHANDLE); // NMI Handler (Int2) 68 [ P0 ++ ] = R0; 69 70 LD32_LABEL(r0, XHANDLE); // Exception Handler (Int3) 71 [ P0 ++ ] = R0; 72 73 [ P0 ++ ] = R0; // IVT4 not used 74 75 LD32_LABEL(r0, HWHANDLE); // HW Error Handler (Int5) 76 [ P0 ++ ] = R0; 77 78 LD32_LABEL(r0, THANDLE); // Timer Handler (Int6) 79 [ P0 ++ ] = R0; 80 81 LD32_LABEL(r0, I7HANDLE); // IVG7 Handler 82 [ P0 ++ ] = R0; 83 84 LD32_LABEL(r0, I8HANDLE); // IVG8 Handler 85 [ P0 ++ ] = R0; 86 87 LD32_LABEL(r0, I9HANDLE); // IVG9 Handler 88 [ P0 ++ ] = R0; 89 90 LD32_LABEL(r0, I10HANDLE);// IVG10 Handler 91 [ P0 ++ ] = R0; 92 93 LD32_LABEL(r0, I11HANDLE);// IVG11 Handler 94 [ P0 ++ ] = R0; 95 96 LD32_LABEL(r0, I12HANDLE);// IVG12 Handler 97 [ P0 ++ ] = R0; 98 99 LD32_LABEL(r0, I13HANDLE);// IVG13 Handler 100 [ P0 ++ ] = R0; 101 102 LD32_LABEL(r0, I14HANDLE);// IVG14 Handler 103 [ P0 ++ ] = R0; 104 105 LD32_LABEL(r0, I15HANDLE);// IVG15 Handler 106 [ P0 ++ ] = R0; 107 108 LD32(p0, EVT_OVERRIDE); 109 R0 = 0; 110 [ P0 ++ ] = R0; 111 R0 = -1; // Change this to mask interrupts (*) 112 [ P0 ] = R0; // IMASK 113 CSYNC; // wait for MMR writes 114 STI R0; // reenable events 115 116 DUMMY: 117 118 R0 = 0 (Z); 119 120 LT0 = r0; // set loop counters to something deterministic 121 LB0 = r0; 122 LC0 = r0; 123 LT1 = r0; 124 LB1 = r0; 125 LC1 = r0; 126 127 ASTAT = r0; // reset other internal regs 128 129 // The following code sets up the test for running in USER mode 130 131 LD32_LABEL(r0, STARTUSER);// One gets to user mode by doing a 132 // ReturnFromInterrupt (RTI) 133 RETI = r0; // We need to load the return address 134 135 // Comment the following line for a USER Mode test 136 137 // JUMP STARTSUP; // jump to code start for SUPERVISOR mode 138 139 RTI; 140 141 STARTSUP: 142 LD32_LABEL(p1, BEGIN); 143 144 LD32(p0, EVT15); 145 [ P0 ] = P1; // IVG15 (General) handler (Int 15) load with start 146 147 RAISE 15; // after we RTI, INT 15 should be taken 148 149 RTI; 150 151 // 152 // The Main Program 153 // 154 155 STARTUSER: 156 LD32_LABEL(sp, USTACK); // setup the stack pointer 157 FP = SP; // set frame pointer 158 JUMP BEGIN; 159 160 //********************************************************************* 161 162 BEGIN: 163 164 // COMMENT the following line for USER MODE tests 165 // [--sp] = RETI; // enable interrupts in supervisor mode 166 167 // **** YOUR CODE GOES HERE **** 168 CHECK_INIT_DEF(p0); //CHECK_INIT(p0, 0xFF7FFFFC); 169 170 LD32_LABEL(p1, TARGET); 171 172 P1 += 1; // cause access to be misaligned 173 174 JUMP ( P1 ); // should cause misaligned 175 176 R1 += 1; 177 R1 += 1; 178 R1 += 1; 179 R1 += 1; 180 R1 += 1; 181 R1 += 1; 182 R1 += 1; 183 R1 += 1; 184 185 TARGET: 186 NOP; 187 NOP; 188 NOP; 189 190 // PUT YOUR TEST HERE! 191 192 193 END: 194 CHECKREG(r5, 0xFFFFFFFF); // handler sets this if reached 195 196 dbg_pass; // End the test 197 198 //********************************************************************* 199 200 // 201 // Handlers for Events 202 // 203 204 EHANDLE: // Emulation Handler 0 205 RTE; 206 207 RHANDLE: // Reset Handler 1 208 RTI; 209 210 NHANDLE: // NMI Handler 2 211 RTN; 212 213 XHANDLE: // Exception Handler 3 214 [ -- SP ] = ASTAT; // save what we damage 215 [ -- SP ] = ( R7:6 ); 216 R7 = SEQSTAT; 217 R7 <<= 26; 218 R7 >>= 26; // only want EXCAUSE 219 R6 = 0x2A; // EXCAUSE 0x2A means I-Fetch Misaligned Access 220 CC = r7 == r6; 221 IF CC JUMP IFETCHMISALIGNED; // If EXCAUSE != 0x2A then leave 222 223 dbg_pass; // if the EXCAUSE is wrong the test will infinite loop 224 225 IFETCHMISALIGNED: 226 R7 = P1; // Fix up return address 227 BITCLR(r7, 0); // Strip off errant LSB 228 RETX = r7; // and put back in RETX 229 230 R5 = -1; // set flag to indicate success 231 232 OUT: 233 ( R7:6 ) = [ SP ++ ]; 234 ASTAT = [sp++]; 235 RTX; 236 237 HWHANDLE: // HW Error Handler 5 238 RTI; 239 240 THANDLE: // Timer Handler 6 241 RTI; 242 243 I7HANDLE: // IVG 7 Handler 244 RTI; 245 246 I8HANDLE: // IVG 8 Handler 247 RTI; 248 249 I9HANDLE: // IVG 9 Handler 250 RTI; 251 252 I10HANDLE: // IVG 10 Handler 253 RTI; 254 255 I11HANDLE: // IVG 11 Handler 256 RTI; 257 258 I12HANDLE: // IVG 12 Handler 259 RTI; 260 261 I13HANDLE: // IVG 13 Handler 262 RTI; 263 264 I14HANDLE: // IVG 14 Handler 265 RTI; 266 267 I15HANDLE: // IVG 15 Handler 268 RTI; 269 270 NOP;NOP;NOP;NOP;NOP;NOP;NOP; // needed for icache bug 271 272 // 273 // Data Segment 274 // 275 276 .data 277 DATA: 278 .space (0x10); 279 280 // Stack Segments (Both Kernel and User) 281 282 .space (STACKSIZE); 283 KSTACK: 284 285 .space (STACKSIZE); 286 USTACK: 287
Indexes created Sun Mar 01 05:31:48 UTC 2026