1 2021-06-30 Mike Frysinger <vapier (a] gentoo.org> 2 3 * configure.ac: Removed. 4 * aclocal.m4: Removed. 5 * configure: Removed. 6 7 2021-06-30 Mike Frysinger <vapier (a] gentoo.org> 8 9 * configure.ac: Delete SIM_AC_OPTION_DEFAULT_MODEL call. 10 * interp.c (sim_open): Set STATE_MODEL_NAME. 11 * aclocal.m4: Regenerate. 12 * configure: Regenerate. 13 14 2021-06-30 Mike Frysinger <vapier (a] gentoo.org> 15 16 * interp.c (sim_open): Set STATE_MACHS. 17 * machs.c (sim_machs): Rename to ... 18 (bfin_sim_machs): ... this. 19 * machs.h (bfin_sim_machs): New decl. 20 21 2021-06-29 Mike Frysinger <vapier (a] gentoo.org> 22 23 * machs.c (sim_machs): Mark const. 24 25 2021-06-27 Mike Frysinger <vapier (a] gentoo.org> 26 27 * Makefile.in: Change to $(SDL_CFLAGS) & $(SDL_LIBS). 28 * configure.ac: Delete PKG_PROG_PKG_CONFIG & 29 PKG_CHECK_MODULES calls. 30 * aclocal.m4, configure: Regenerate. 31 32 2021-06-24 Mike Frysinger <vapier (a] gentoo.org> 33 34 * interp.c (bfin_syscall): Set sc.arg5 & sc.arg6. 35 36 2021-06-22 Mike Frysinger <vapier (a] gentoo.org> 37 38 * configure: Regenerate. 39 40 2021-06-21 Mike Frysinger <vapier (a] gentoo.org> 41 42 * aclocal.m4: Regenerate. 43 * configure: Regenerate. 44 45 2021-06-21 Mike Frysinger <vapier (a] gentoo.org> 46 47 * Makefile.in (SIM_EXTRA_HW_DEVICES): Define. 48 * configure.ac (SIM_AC_OPTION_HARDWARE): Delete call. 49 * configure: Regenerate. 50 51 2021-06-20 Mike Frysinger <vapier (a] gentoo.org> 52 53 * configure.ac (SIM_AC_COMMON): Delete. 54 * aclocal.m4, configure: Regenerate. 55 56 2021-06-20 Mike Frysinger <vapier (a] gentoo.org> 57 58 * Makefile.in: Change @MAINTAINER_MODE_TRUE@ to $(MAINT). 59 * aclocal.m4, configure: Regenerate. 60 61 2021-06-20 Mike Frysinger <vapier (a] gentoo.org> 62 63 * aclocal.m4: Regenerate. 64 * configure: Regenerate. 65 66 2021-06-19 Mike Frysinger <vapier (a] gentoo.org> 67 68 * aclocal.m4: Regenerate. 69 * configure: Regenerate. 70 71 2021-06-19 Mike Frysinger <vapier (a] gentoo.org> 72 73 * configure: Regenerate. 74 75 2021-06-18 Mike Frysinger <vapier (a] gentoo.org> 76 77 * aclocal.m4, configure: Regenerate. 78 79 2021-06-18 Mike Frysinger <vapier (a] gentoo.org> 80 81 * configure: Regenerate. 82 83 2021-06-18 Mike Frysinger <vapier (a] gentoo.org> 84 85 * dv-bfin_cec.c: Include sim-signal.h. 86 * sim-main.h: Delete sim-signal.h include. 87 88 2021-06-17 Mike Frysinger <vapier (a] gentoo.org> 89 90 * configure.ac: Delete SIM_AC_OPTION_ENDIAN call. 91 * interp.c (sim_open): Set current_target_byte_order. 92 * aclocal.m4, configure: Regenerate. 93 94 2021-06-16 Mike Frysinger <vapier (a] gentoo.org> 95 96 * configure: Regenerate. 97 98 2021-06-16 Mike Frysinger <vapier (a] gentoo.org> 99 100 * configure: Regenerate. 101 * config.in: Removed. 102 103 2021-06-15 Mike Frysinger <vapier (a] gentoo.org> 104 105 * config.in, configure: Regenerate. 106 107 2021-06-14 Mike Frysinger <vapier (a] gentoo.org> 108 109 * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS. 110 * configure: Regenerate. 111 112 2021-06-12 Mike Frysinger <vapier (a] gentoo.org> 113 114 * interp.c: Include portability.h. 115 (getuid, getgid, geteuid, getegid setuid, setgid): Delete. 116 117 2021-06-12 Mike Frysinger <vapier (a] gentoo.org> 118 119 * configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT. 120 * interp.c (sim_open): Set current_alignment. 121 122 2021-06-12 Mike Frysinger <vapier (a] gentoo.org> 123 124 * aclocal.m4, config.in, configure: Regenerate. 125 126 2021-06-12 Mike Frysinger <vapier (a] gentoo.org> 127 128 * configure.ac: Delete calls to AC_CHECK_FUNCS_ONCE and 129 AC_CHECK_HEADERS_ONCE. 130 * config.in, configure: Regenerate. 131 132 2021-05-28 Mike Frysinger <vapier (a] gentoo.org> 133 134 * dv-bfin_otp.c (bfin_otp_write_page): Shift data1 & data3 by 32-bits. 135 136 2021-05-23 Mike Frysinger <vapier (a] gentoo.org> 137 138 * dv-bfin_otp.c (bfin_otp_write_page): Fix args to 139 bfin_otp_write_page_val2. 140 141 2021-05-23 Mike Frysinger <vapier (a] gentoo.org> 142 143 * dv-bfin_otp.c (bfin_otp_write_page): Call bfin_otp_write_page_val2. 144 145 2021-05-23 Mike Frysinger <vapier (a] gentoo.org> 146 147 * dv-bfin_cec.c: Include strings.h. 148 149 2021-05-17 Mike Frysinger <vapier (a] gentoo.org> 150 151 * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete. 152 153 2021-05-17 Mike Frysinger <vapier (a] gentoo.org> 154 155 * interp.c (sim_open): Call sim_state_alloc_extra. 156 * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define. 157 (struct sim_state): Delete. 158 (STATE_BOARD_DATA): Define. 159 160 2021-05-16 Mike Frysinger <vapier (a] gentoo.org> 161 162 * bfin-sim.c, devices.c, dv-bfin_cec.c, dv-bfin_ctimer.c, 163 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, 164 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, 165 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gpio.c, dv-bfin_gpio2.c, 166 dv-bfin_gptimer.c, dv-bfin_jtag.c, dv-bfin_mmu.c, dv-bfin_nfc.c, 167 dv-bfin_otp.c, dv-bfin_pfmon.c, dv-bfin_pint.c, dv-bfin_pll.c, 168 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, 169 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, 170 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, interp.c, 171 machs.c: Replace config.h include with defs.h. 172 173 2021-05-16 Mike Frysinger <vapier (a] gentoo.org> 174 175 * config.in, configure: Regenerate. 176 177 2021-05-14 Mike Frysinger <vapier (a] gentoo.org> 178 179 * interp.c: Update include path. 180 181 2021-05-04 Mike Frysinger <vapier (a] gentoo.org> 182 183 * configure: Regenerate. 184 185 2021-05-03 Simon Marchi <simon.marchi (a] polymtl.ca> 186 187 * interp.c (sim_open): Adjust format string specifier. 188 189 2021-05-02 Mike Frysinger <vapier (a] gentoo.org> 190 191 * bfin-sim.c: Include ansidecl.h. 192 (illegal_instruction): Change __attribute__((noreturn)) to 193 ATTRIBUTE_NORETURN. 194 (illegal_instruction_combination, illegal_instruction_or_combination, 195 unhandled_instruction): Likewise. 196 197 2021-05-01 Mike Frysinger <vapier (a] gentoo.org> 198 199 * dv-bfin_mmu.c (bfin_mmu_options): Mark static. 200 (sim_install_bfin_mmu): New function & prototype. 201 * interp.c (e_sim_add_option_table): Delete. 202 * machs.c (bfin_mach_options): Mark static. 203 (sim_install_bfin_mach): New function & prototype. 204 205 2021-05-01 Mike Frysinger <vapier (a] gentoo.org> 206 207 * config.in, configure: Regenerate. 208 209 2021-04-26 Mike Frysinger <vapier (a] gentoo.org> 210 211 * Makefile.in (NL_TARGET): Delete. 212 213 2021-04-23 Mike Frysinger <vapier (a] gentoo.org> 214 215 * configure.ac (SIM_AC_OPTION_HARDWARE): Delete first two args. 216 * configure: Regenerate. 217 218 2021-04-22 Tom Tromey <tom (a] tromey.com> 219 220 * configure, config.in: Rebuild. 221 222 2021-04-22 Tom Tromey <tom (a] tromey.com> 223 224 * Makefile.in (INCLUDE): Remove. 225 226 2021-04-22 Tom Tromey <tom (a] tromey.com> 227 228 * configure: Rebuild. 229 230 2021-04-21 Mike Frysinger <vapier (a] gentoo.org> 231 232 * aclocal.m4: Regenerate. 233 234 2021-04-21 Simon Marchi <simon.marchi (a] polymtl.ca> 235 236 * configure: Regenerate. 237 238 2021-04-18 Mike Frysinger <vapier (a] gentoo.org> 239 240 * configure.ac: Change AC_CHECK_HEADERS to AC_CHECK_HEADERS_ONCE. 241 * configure: Regenerate. 242 243 2021-04-18 Mike Frysinger <vapier (a] gentoo.org> 244 245 * configure.ac: Change AC_CHECK_FUNCS to AC_CHECK_FUNCS_ONCE and 246 delete mmap & munmap. 247 * configure: Regenerate. 248 249 2021-04-18 Mike Frysinger <vapier (a] gentoo.org> 250 251 * interp.c (bfin_syscall): Delete CB_SYS_getpid handling. 252 253 2021-04-12 Mike Frysinger <vapier (a] gentoo.org> 254 255 * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all. 256 257 2021-04-02 Mike Frysinger <vapier (a] gentoo.org> 258 259 * aclocal.m4, configure: Regenerate. 260 261 2021-02-28 Mike Frysinger <vapier (a] gentoo.org> 262 263 * configure: Regenerate. 264 265 2021-02-21 Mike Frysinger <vapier (a] gentoo.org> 266 267 * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4. 268 * aclocal.m4, configure: Regenerate. 269 270 2021-02-13 Mike Frysinger <vapier (a] gentoo.org> 271 272 * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS. 273 * aclocal.m4, configure: Regenerate. 274 275 2021-02-06 Mike Frysinger <vapier (a] gentoo.org> 276 277 * interp.c (sim_open): Delete call to STATE_WATCHPOINTS. 278 279 2021-02-06 Mike Frysinger <vapier (a] gentoo.org> 280 281 * configure: Regenerate. 282 283 2021-01-30 Mike Frysinger <vapier (a] gentoo.org> 284 285 * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc. 286 287 2021-01-11 Mike Frysinger <vapier (a] gentoo.org> 288 289 * config.in, configure: Regenerate. 290 291 2021-01-09 Mike Frysinger <vapier (a] gentoo.org> 292 293 * configure: Regenerate. 294 295 2021-01-08 Mike Frysinger <vapier (a] gentoo.org> 296 297 * configure: Regenerate. 298 299 2021-01-04 Mike Frysinger <vapier (a] gentoo.org> 300 301 * machs.c: Include stdlib.h. 302 303 2021-01-04 Mike Frysinger <vapier (a] gentoo.org> 304 305 * dv-bfin_dma.c: Include stdlib.h. 306 307 2021-01-02 Mike Frysinger <vapier (a] gentoo.org> 308 309 * interp.c: Change ALIGN to align_up. 310 * sim-main.h (ALIGN): Delete 311 312 2020-08-21 Simon Marchi <simon.marchi (a] polymtl.ca> 313 314 * configure.ac: Include config/pkg.m4. 315 316 2020-07-29 Simon Marchi <simon.marchi (a] efficios.com> 317 318 * aclocal.m4, configure: Re-generate. 319 320 2017-09-06 John Baldwin <jhb (a] FreeBSD.org> 321 322 * configure: Regenerate. 323 324 2016-08-13 Mike Frysinger <vapier (a] gentoo.org> 325 326 PR sim/20438 327 * machs.h (MODEL_TYPE, MACH_ATTR, BFIN_INSN_*): Move ... 328 * arch.h: ... to this new header file. 329 * sim-main.h (SIM_CPU): Delete. 330 Include arch.h before sim-base.h, and move sim-base.h before 331 bfin-sim.h. 332 333 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 334 335 * config.in, configure: Regenerate. 336 337 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 338 339 * configure: Regenerate. 340 341 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 342 343 * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call. 344 * configure: Regenerate. 345 346 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 347 348 * configure: Regenerate. 349 350 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 351 352 * configure: Regenerate. 353 354 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 355 356 * configure.ac (SIM_AC_OPTION_INLINE): Delete call. 357 * configure: Regenerate. 358 359 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 360 361 * configure: Regenerate. 362 363 2016-01-10 Mike Frysinger <vapier (a] gentoo.org> 364 365 * configure: Regenerate. 366 367 2016-01-09 Mike Frysinger <vapier (a] gentoo.org> 368 369 * config.in, configure: Regenerate. 370 371 2016-01-06 Mike Frysinger <vapier (a] gentoo.org> 372 373 * interp.c (bfin_syscall): Remove first const from argv. 374 (sim_open): Mark argv const. 375 (simple_env): Remove first const. 376 (bfin_user_init): Remove first const from argv and and env 377 (bfin_os_init): Remove first const from argv. 378 (sim_create_inferior): Mark argv and env const. 379 Drop casts from bfin_user_init and bfin_os_init calls. 380 381 2016-01-05 Mike Frysinger <vapier (a] gentoo.org> 382 383 * interp.c (step_once): Call TRACE_DISASM. 384 385 2016-01-04 Mike Frysinger <vapier (a] gentoo.org> 386 387 * bfin-sim.c (decode_dsp32shift_0): Change MIN to min. 388 * dv-bfin_dma.c (bfin_dma_hw_event_callback): Likewise. 389 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_write_amgctl): Likewise. 390 * dv-bfin_emac.c (bfin_emac_dma_read_buffer): Change MAX to max. 391 * dv-bfin_mmu.c (_mmu_check_addr): Change MIN to min. 392 * dv-bfin_trace.c (bfin_trace_io_read_buffer): Likewise. 393 * interp.c (bfin_fdpic_load): Change MAX to max. 394 (bfin_fdpic_load): Likewise. 395 * sim-main.h (MIN, MAX): Delete. 396 (CLAMP): Change MIN to min and MAX to max. 397 398 2016-01-04 Mike Frysinger <vapier (a] gentoo.org> 399 400 * configure: Regenerate. 401 402 2016-01-03 Mike Frysinger <vapier (a] gentoo.org> 403 404 * interp.c (sim_open): Update sim_parse_args comment. 405 406 2016-01-03 Mike Frysinger <vapier (a] gentoo.org> 407 408 * TODO: Delete file. 409 410 2016-01-03 Mike Frysinger <vapier (a] gentoo.org> 411 412 * interp.c (count_argc): Delete. 413 (bfin_syscall): Change count_argc to countargv. 414 (bfin_user_init): Likewise. 415 416 2016-01-03 Mike Frysinger <vapier (a] gentoo.org> 417 418 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. 419 * configure: Regenerate. 420 421 2016-01-02 Mike Frysinger <vapier (a] gentoo.org> 422 423 * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to 424 LITTLE. 425 * configure: Regenerate. 426 427 2015-12-27 Mike Frysinger <vapier (a] gentoo.org> 428 429 * Makefile.in (SIM_OBJS): Delete sim-hload.o. 430 431 2015-12-26 Mike Frysinger <vapier (a] gentoo.org> 432 433 * config.in, configure: Regenerate. 434 435 2015-12-26 Mike Frysinger <vapier (a] gentoo.org> 436 437 * devices.c (bfin_mmr_invalid): Delete cpu arg and add missing arg. 438 Add cpu, rw, and reason local vars. Rewrite error messages. Add 439 more todo comments. 440 (dv_bfin_mmr_invalid): Update bfin_mmr_invalid call. 441 (dv_bfin_mmr_require): Likewise. Change return to bool. Check 442 alignment of the addr variable. 443 (bfin_mmr_check, dv_bfin_mmr_check, device_io_read_buffer, 444 device_io_write_buffer): Delete. 445 (dv_bfin_mmr_require_16_32): Define. 446 * devices.h (dv_bfin_mmr_require): Change return to bool. 447 (dv_bfin_mmr_check): Delete. 448 (dv_bfin_mmr_require_16_32): Define. 449 Add a few comments. 450 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Call 451 dv_bfin_mmr_require_32. 452 (bfin_cec_io_read_buffer): Likewise. 453 * dv-bfin_ctimer.c (bfin_ctimer_io_write_buffer): Likewise. 454 (bfin_ctimer_io_read_buffer): Likewise. 455 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Call 456 dv_bfin_mmr_require_16_32. Return 0 in the default case. 457 (bfin_dma_io_read_buffer): Call dv_bfin_mmr_require_16_32. 458 * dv-bfin_ebiu_amc.c (bf50x_ebiu_amc_io_write_buffer): Return 0 459 when dv_bfin_mmr_require_16 fails and in the default case. 460 (bf53x_ebiu_amc_io_write_buffer): Likewise. 461 (bf54x_ebiu_amc_io_write_buffer): Likewise. 462 (bfin_ebiu_amc_io_write_buffer): Call dv_bfin_mmr_require_16_32. 463 (bf50x_ebiu_amc_io_read_buffer): Return 0 when 464 dv_bfin_mmr_require_16 fails and in the default case. 465 (bf53x_ebiu_amc_io_read_buffer): Likewise. 466 (bf54x_ebiu_amc_io_read_buffer): Likewise. 467 (bfin_ebiu_amc_io_read_buffer): Call dv_bfin_mmr_require_16_32. 468 * dv-bfin_ebiu_ddrc.c (bfin_ebiu_ddrc_io_write_buffer): Call 469 dv_bfin_mmr_require_16_32. Return 0 when dv_bfin_mmr_require_16 or 470 dv_bfin_mmr_require_32 fails. 471 (bfin_ebiu_ddrc_io_read_buffer): Likewise. 472 * dv-bfin_ebiu_sdc.c (bfin_ebiu_sdc_io_write_buffer): Likewise. 473 (bfin_ebiu_sdc_io_read_buffer): Likewise. 474 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Return 0 when 475 dv_bfin_mmr_require_32 fails and in the default case. 476 (bfin_emac_io_read_buffer): Likewise. 477 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Call 478 dv_bfin_mmr_require_16_32 and return 0 when dv_bfin_mmr_require_16 479 or dv_bfin_mmr_require_32 fails and in the default case. 480 (bfin_eppi_io_read_buffer): Likewise. 481 * dv-bfin_evt.c (bfin_evt_io_write_buffer): Call 482 dv_bfin_mmr_require_32. 483 (bfin_evt_io_read_buffer): Likewise. 484 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Move call to 485 dv_bfin_mmr_require_16 to earlier in the func. Return 0 when it 486 fails and in the default case. 487 (bfin_gpio_io_read_buffer): Likewise. 488 * dv-bfin_gpio2.c (bfin_gpio_io_write_buffer): Move call to 489 dv_bfin_mmr_require_16 and dv_bfin_mmr_require_32 to earlier in the 490 func. Return 0 when it fails and in the default case. 491 (bfin_gpio_io_read_buffer): Likewise. 492 * dv-bfin_gptimer.c (bfin_gptimer_io_write_buffer): Call 493 dv_bfin_mmr_require_16_32. Return 0 when dv_bfin_mmr_require_16 or 494 dv_bfin_mmr_require_32 fails and in the default case. 495 (bfin_gptimer_io_read_buffer): Likewise. 496 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Call 497 dv_bfin_mmr_require_32. Return 0 in the default case. 498 (bfin_jtag_io_read_buffer): Likewise. Delete while(1) loop. 499 * dv-bfin_mmu.c (bfin_mmu_io_write_buffer): Call 500 dv_bfin_mmr_require_32. Return 0 in the default case. 501 (bfin_mmu_io_read_buffer): Likewise. Delete while(1) loop. 502 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Move call to 503 dv_bfin_mmr_require_16 to earlier in the func. Return 0 when it 504 fails and in the default case. 505 (bfin_nfc_io_read_buffer): Likewise. 506 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Call 507 dv_bfin_mmr_require_16_32. Return 0 when dv_bfin_mmr_require_16 508 or dv_bfin_mmr_require_32 fails and in the default case. 509 (bfin_otp_io_read_buffer): Likewise. 510 * dv-bfin_pfmon.c (bfin_pfmon_io_write_buffer): Call 511 dv_bfin_mmr_require_32. Return 0 in the default case. 512 (bfin_pfmon_io_read_buffer): Likewise. Delete while(1) loop. 513 * dv-bfin_pint.c (bfin_pint_io_write_buffer): Move call to 514 dv_bfin_mmr_require_32 to earlier in the func. Return 0 when it 515 fails and in the default case. 516 (bfin_pint_io_read_buffer): Likewise. 517 * dv-bfin_pll.c (bfin_pll_io_write_buffer): Call 518 dv_bfin_mmr_require_16_32. Return 0 when dv_bfin_mmr_require_16 519 fails. 520 (bfin_pll_io_read_buffer): Likewise. 521 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Move call to 522 dv_bfin_mmr_require_16 to earlier in the func. Return 0 when it 523 fails and in the default case. 524 9bfin_ppi_io_read_buffer): Likewise. 525 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Call 526 dv_bfin_mmr_require_16_32. 527 (bfin_rtc_io_read_buffer): Likewise. 528 * dv-bfin_sic.c (bfin_sic_52x_io_write_buffer): Likewise. 529 (bfin_sic_52x_io_read_buffer, bfin_sic_537_io_write_buffer, 530 bfin_sic_537_io_read_buffer, bfin_sic_54x_io_write_buffer, 531 bfin_sic_54x_io_read_buffer, bfin_sic_561_io_write_buffer, 532 bfin_sic_561_io_read_buffer): Likewise. 533 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Move call to 534 dv_bfin_mmr_require_16 to earlier in the func. Return 0 when it 535 fails and in the default case. 536 (bfin_spi_io_read_buffer): Likewise. 537 * dv-bfin_trace.c (bfin_trace_io_write_buffer): Call 538 dv_bfin_mmr_require_32. Return 0 in the default case. 539 (bfin_trace_io_read_buffer): Likewise. Delete while(1) loop. 540 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Move call to 541 dv_bfin_mmr_require_16 to earlier in the func. Return 0 when it 542 fails and in the default case. 543 (bfin_twi_io_read_buffer): Likewise. 544 * dv-bfin_uart.c (bfin_uart_io_write_buffer): Likewise. 545 (bfin_uart_io_read_buffer): Likewise. 546 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Likewise. 547 (bfin_uart_io_read_buffer): Likewise. 548 * dv-bfin_wdog.c (bfin_wdog_io_write_buffer): Call 549 dv_bfin_mmr_require_16_32. 550 (bfin_wdog_io_read_buffer): Likewise. Return 0 when 551 dv_bfin_mmr_require_16 fails. 552 * dv-bfin_wp.c (bfin_wp_io_write_buffer): Call 553 dv_bfin_mmr_require_32. Return 0 in the default case. 554 (bfin_wp_io_read_buffer): Likewise. Delete while(1) loop. 555 * tconfig.h: Delete file. 556 557 2015-12-26 Mike Frysinger <vapier (a] gentoo.org> 558 559 * bfin-sim.c (decode_LDST_0): Add 4th element to posts array. 560 561 2015-12-26 Mike Frysinger <vapier (a] gentoo.org> 562 563 * interp.c (sim_create_inferior): Update comment and argv check. 564 565 2015-12-25 Mike Frysinger <vapier (a] gentoo.org> 566 567 * Makefile.in (SIM_OBJS): Delete sim-model.o. 568 * tconfig.h (SIM_HAVE_MODEL): Delete. 569 570 2015-12-25 Mike Frysinger <vapier (a] gentoo.org> 571 572 * machs.c: Rename MACH to SIM_MACH, MACH_IMP_PROPERTIES to 573 SIM_MACH_IMP_PROPERTIES, and MODEL to SIM_MODEL. 574 575 2015-12-25 Mike Frysinger <vapier (a] gentoo.org> 576 577 * devices.c (device_error): Delete. 578 579 2015-12-24 Mike Frysinger <vapier (a] gentoo.org> 580 581 * tconfig.h (SIM_HANDLES_LMA): Delete. 582 583 2015-11-17 Mike Frysinger <vapier (a] gentoo.org> 584 585 * tconfig.h (WITH_MODULO_MEMORY): Delete. 586 587 2015-11-15 Mike Frysinger <vapier (a] gentoo.org> 588 589 * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and 590 sim-stop.o. 591 592 2015-11-14 Mike Frysinger <vapier (a] gentoo.org> 593 594 * interp.c (sim_close): Delete. 595 596 2015-10-11 Mike Frysinger <vapier (a] gentoo.org> 597 598 PR sim/18407 599 * bfin-sim.c (decode_dsp32shiftimm_0): Call ashiftrt when count 600 is less than 0. 601 602 2015-06-24 Mike Frysinger <vapier (a] gentoo.org> 603 604 * interp.c (trace_register): Delete. 605 * sim-main.h (trace_register, TRACE_REGISTER, TRACE_REG): Delete. 606 607 2015-06-23 Mike Frysinger <vapier (a] gentoo.org> 608 609 * configure: Regenerate. 610 611 2015-06-17 Mike Frysinger <vapier (a] gentoo.org> 612 613 * interp.c: Include sim-syscall.h. 614 (syscall_read_mem, syscall_write_mem): Delete. 615 (bfin_syscall): Change syscall_read_mem/syscall_write_mem to 616 sim_syscall_read_mem/sim_syscall_write_mem. 617 618 2015-06-17 Mike Frysinger <vapier (a] gentoo.org> 619 620 * linux-targ-map.h: Update example comments. 621 (cb_linux_syscall_map): Fill out name field. 622 (cb_linux_errno_map, cb_linux_open_map, cb_linux_signal_map): 623 Likewise. 624 625 2015-06-12 Mike Frysinger <vapier (a] gentoo.org> 626 627 * interp.c: Expand comment on CB_SYS_xxx defines. 628 629 2015-06-12 Mike Frysinger <vapier (a] gentoo.org> 630 631 * configure: Regenerate. 632 633 2015-06-12 Mike Frysinger <vapier (a] gentoo.org> 634 635 * configure: Regenerate. 636 637 2015-06-12 Mike Frysinger <vapier (a] gentoo.org> 638 639 * bfin-sim.c (hwloop_get_next_pc): Change TRACE_BRANCH to 640 BFIN_TRACE_BRANCH. 641 (decode_ProgCtrl_0, decode_BRCC_0, decode_UJUMP_0, decode_CALLa_0): 642 Likewise. 643 * bfin-sim.h (__PUT_MEM, __GET_MEM): Change TRACE_CORE to 644 BFIN_TRACE_CORE. 645 * dv-bfin_cec.c (_cec_raise, cec_latch, cec_return): Change 646 TRACE_BRANCH to BFIN_TRACE_BRANCH. 647 * interp.c (syscall_read_mem, syscall_write_mem): Change MAYBE_TRACE 648 to TRACE_CORE. 649 * sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT, 650 TRACE_SYSCALL, TRACE_EVENTS): Delete. 651 (TRACE_CORE): Rename to ... 652 (BFIN_TRACE_CORE): ... this. Change MAYBE_TRACE to TRACE_CORE. 653 (TRACE_BRANCH): Rename to ... 654 (BFIN_TRACE_BRANCH): ... this. Change MAYBE_TRACE to TRACE_BRANCH. 655 656 2015-04-24 David Binderman <dcb314 (a] hotmail.com> 657 Nick Clifton <nickc (a] redhat.com> 658 659 PR 18273 660 * bfin-sim.c (decode_dsp32alu_0): Remove spurious check for 661 s == 1. 662 663 2015-04-18 Mike Frysinger <vapier (a] gentoo.org> 664 665 * sim-main.h (SIM_CPU): Add note to clean this up. 666 667 2015-04-18 Mike Frysinger <vapier (a] gentoo.org> 668 669 * sim-main.h (sim_cia): Delete. 670 671 2015-04-17 Mike Frysinger <vapier (a] gentoo.org> 672 673 * sim-main.h (CIA_GET, CIA_SET): Delete. 674 675 2015-04-15 Mike Frysinger <vapier (a] gentoo.org> 676 677 * Makefile.in (SIM_OBJS): Delete sim-cpu.o. 678 * sim-main.h (STATE_CPU): Delete. 679 680 2015-04-13 Mike Frysinger <vapier (a] gentoo.org> 681 682 * configure: Regenerate. 683 684 2015-04-06 Mike Frysinger <vapier (a] gentoo.org> 685 686 * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o. 687 688 2015-04-01 Mike Frysinger <vapier (a] gentoo.org> 689 690 * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS). 691 692 2015-03-31 Mike Frysinger <vapier (a] gentoo.org> 693 694 * config.in, configure: Regenerate. 695 696 2015-03-24 Mike Frysinger <vapier (a] gentoo.org> 697 698 * configure: Regenerate. 699 700 2015-03-23 Mike Frysinger <vapier (a] gentoo.org> 701 702 * configure: Regenerate. 703 704 2015-03-23 Mike Frysinger <vapier (a] gentoo.org> 705 706 * configure: Regenerate. 707 * configure.ac (BFIN_SIM_EXTRA_OBJS): Delete. 708 * Makefile.in (SIM_OBJS): Delete @BFIN_SIM_EXTRA_OBJS@. 709 710 2015-03-23 Mike Frysinger <vapier (a] gentoo.org> 711 712 * dv-bfin_uart.c [!HAVE_DV_SOCKSER] (dv_sockser_status, 713 dv_sockser_write, dv_sockser_read): Delete. 714 715 2015-03-23 Mike Frysinger <vapier (a] gentoo.org> 716 717 * sim-main.h: Delete run-sim.h include. 718 719 2015-03-16 Mike Frysinger <vapier (a] gentoo.org> 720 721 * aclocal.m4, config.in, configure: Regenerate. 722 * tconfig.in: Rename file ... 723 * tconfig.h: ... here. 724 725 2015-03-15 Mike Frysinger <vapier (a] gentoo.org> 726 727 * tconfig.in: Delete includes. 728 [HAVE_DV_SOCKSER]: Delete. 729 730 2015-03-14 Mike Frysinger <vapier (a] gentoo.org> 731 732 * bfin-sim.c (decode_dsp32alu_0): Change v to bu32. 733 734 2015-03-14 Mike Frysinger <vapier (a] gentoo.org> 735 736 * Makefile.in (SIM_RUN_OBJS): Delete. 737 738 2015-03-10 Mike Frysinger <vapier (a] gentoo.org> 739 740 PR sim/13160 741 * Makefile.in ($(srcdir)/linux-fixed-code.h): Put a ; after the 742 print sed command for BSD compatibility. 743 744 2015-03-08 Mike Frysinger <vapier (a] gentoo.org> 745 746 PR sim/13160 747 * Makefile.in ($(srcdir)/linux-fixed-code.h): Specify the asm input 748 directly rather than use $<. Move the file name to the end of the 749 sed command to be POSIX compliant. 750 751 2014-08-19 Alan Modra <amodra (a] gmail.com> 752 753 * configure: Regenerate. 754 755 2014-08-15 Roland McGrath <mcgrathr (a] google.com> 756 757 * configure: Regenerate. 758 * config.in: Regenerate. 759 760 2014-03-04 Mike Frysinger <vapier (a] gentoo.org> 761 762 * configure: Regenerate. 763 764 2013-09-23 Alan Modra <amodra (a] gmail.com> 765 766 * configure: Regenerate. 767 768 2013-06-23 Mike Frysinger <vapier (a] gentoo.org> 769 770 * bfin-sim.c (decode_dsp32alu_0): Add note about broken handling of 771 SEARCH with parallel insns. 772 773 2013-06-23 Mike Frysinger <vapier (a] gentoo.org> 774 775 * bfin-sim.c (decode_dsp32shift_0): Make sure HLs is 0 after last 776 insn that uses it. 777 (decode_dsp32shiftimm_0): Likewise. 778 Require HLs be less than 2 for accumulator shift insns. 779 780 2013-06-18 Mike Frysinger <vapier (a] gentoo.org> 781 782 * bfin-sim.c (decode_dsp32alu_0): Check more opcode fields before 783 decoding various insns. 784 785 2013-06-17 Mike Frysinger <vapier (a] gentoo.org> 786 787 * TODO: Add more notes. 788 789 2013-06-09 Mike Frysinger <vapier (a] gentoo.org> 790 791 * Makefile.in ($(srcdir)/linux-fixed-code.h): Add 792 @MAINTAINER_MODE_TRUE@ as the first item in the dependency list. 793 794 2013-06-03 Mike Frysinger <vapier (a] gentoo.org> 795 796 * aclocal.m4, configure: Regenerate. 797 798 2013-05-10 Freddie Chopin <freddie_chopin (a] op.pl> 799 800 * configure: Rebuild. 801 802 2013-03-26 Mike Frysinger <vapier (a] gentoo.org> 803 804 * aclocal.m4, configure: Regenerate. 805 806 2013-03-23 Joel Sherrill <joel.sherrill (a] oarcorp.com> 807 808 * configure.ac: Use $SIM_DV_SOCKSER_O. 809 * configure: Regenerated. 810 811 2012-12-20 Joel Brobecker <brobecker (a] adacore.com> 812 813 * aclocal.m4: Revert the previous change changing 814 the license from GPL v2 or later to GPL v3 or later 815 (this file was generated). 816 817 2012-12-20 Joel Brobecker <brobecker (a] adacore.com> 818 819 * linux-fixed-code.s: Revert the previous change changing 820 the license from GPL v2 or later to GPL v3 or later. 821 822 2012-07-31 Mike Frysinger <vapier (a] gentoo.org> 823 824 * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and 825 0x10000 to the alias field of BFROMA. 826 (bf561_roms): Pass 0x1000 to alias field of BFROM. 827 (bf59x_roms): Pass 0x10000 to alias field of BFROMA. 828 829 2012-07-31 Mike Frysinger <vapier (a] gentoo.org> 830 831 * machs.c (bfin_reg_fetch): Change return 0 to return -1, and 832 return -1 to return 4. 833 (bfin_reg_store): Likewise. 834 835 2012-06-15 Joel Brobecker <brobecker (a] adacore.com> 836 837 * config.in, configure: Regenerate. 838 839 2012-04-09 Mike Frysinger <vapier (a] gentoo.org> 840 841 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint. 842 * configure: Regenerate. 843 * dv-bfin_pint.c, dv-bfin_pint.h: New device model. 844 * machs.c (bf542_dev): Add PINT register blocks. 845 (bf544_dev, bf547_dev): Likewise. 846 (PINT_PIQS): Define. 847 (bf54x_port): Add pint/gpio routing. 848 * machs.h (BFIN_MMR_PINT_SIZE): Define. 849 850 2012-04-09 Mike Frysinger <vapier (a] gentoo.org> 851 852 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2. 853 * configure: Regenerate. 854 * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model. 855 * machs.c (bf54x_mem): Delete GPIO mem stub. 856 (bf542_dev): Add GPIO register blocks. 857 (bf544_dev, bf547_dev): Likewise. 858 * machs.h (BFIN_MMR_GPIO2_SIZE): Define. 859 860 2012-04-09 Robin Getz <robin.getz (a] analog.com> 861 862 * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT 863 and LSHIFT, and set ASTAT based on the before/after values. 864 Rename "val" to "acc" to be consistent with other code branches. 865 866 2012-04-09 Robin Getz <robin.getz (a] analog.com> 867 868 * bfin-sim.c (sgn_extend): New helper. 869 (decode_dsp32shiftimm_0): Call lshift when newimmag is more 870 than 16, otherwise call ashiftrt. Set ASTAT fields as needed. 871 For accumulator shifts, call new sgn_extend helper. 872 873 2012-04-08 Mike Frysinger <vapier (a] gentoo.org> 874 875 * bfin-sim.c (illegal_instruction_or_combination): New helper. 876 (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead 877 of illegal_instruction. 878 (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0, 879 decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0, 880 decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise. 881 (decode_PushPopMultiple_0): Call illegal_instruction_combination when 882 PARALLEL_GROUP is not BFIN_PARALLEL_NONE. 883 (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0, 884 decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise. 885 (decode_CC2stat_0): Check PARALLEL_GROUP before cbit. 886 (decode_LDSTpmod_0): Call illegal_instruction_combination when 887 PARALLEL_GROUP is BFIN_PARALLEL_GROUP2. 888 (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0, 889 decode_LDSTiiFP_0, decode_LDSTii_0): Likewise. 890 891 2012-04-08 Mike Frysinger <vapier (a] gentoo.org> 892 893 * bfin-sim.h (bfin_parallel_group): New enum. 894 (bfin_cpu_state): Add new "group" member. 895 (PARALLEL_GROUP): Define. 896 * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to 897 PARALLEL_GROUP. 898 (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0, 899 decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0, 900 decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0, 901 decode_CALLa_0, decode_linkage_0): Likewise. 902 (_interp_insn_bfin): Set PARALLEL_GROUP. 903 (interp_insn_bfin): Likewise. 904 905 2012-04-08 Mike Frysinger <vapier (a] gentoo.org> 906 907 * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN. 908 909 2012-04-01 Mike Frysinger <vapier (a] gentoo.org> 910 911 * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination 912 when INSN_LEN is non-zero before 32bit decode. 913 914 2012-04-01 Mike Frysinger <vapier (a] gentoo.org> 915 916 * bfin-dis.c (fmtconst): Replace decimal handling with a single 917 sprintf call and the '*' field width. 918 919 2012-04-01 Mike Frysinger <vapier (a] gentoo.org> 920 921 * machs.c (bfin_model_map_bfrom): Return when mnum is 535. 922 923 2012-04-01 Mike Frysinger <vapier (a] gentoo.org> 924 925 * interp.c (bfin_user_init): Move auxvt_size decl from top to 926 inside of auxvt check. 927 928 2012-03-31 Mike Frysinger <vapier (a] gentoo.org> 929 930 * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2. 931 932 2012-03-31 Mike Frysinger <vapier (a] gentoo.org> 933 934 * devices.c: Include devices.h. 935 936 2012-03-24 Mike Frysinger <vapier (a] gentoo.org> 937 938 * aclocal.m4, config.in, configure: Regenerate. 939 940 2012-03-19 Robin Getz <robin.getz (a] analog.com> 941 Mike Frysinger <vapier (a] gentoo.org> 942 943 * bfin-sim.c (lshift): Add an overflow flag. Delete now unused 944 i, j, and tmp vars. Add a new v_i var. Split the overflow logic 945 out from the saturate logic. Do not set V ASTAT bits when working 946 with accumulators. 947 (decode_ALU2op_0): Add new argument to lshift call. 948 (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0): 949 Likewise. 950 951 2012-03-18 Mike Frysinger <vapier (a] gentoo.org> 952 953 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base. 954 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with 955 amc->bank_base. 956 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base. 957 958 2012-03-18 Mike Frysinger <vapier (a] gentoo.org> 959 960 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use 961 ARRAY_SIZE rather than hardcoded constant. 962 963 2012-02-04 Mike Frysinger <vapier (a] gentoo.org> 964 965 * config.in: Regenerate. 966 * configure: Likewise. 967 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS. 968 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and 969 _LINUX_TYPES_H defines. 970 971 2011-12-03 Mike Frysinger <vapier (a] gentoo.org> 972 973 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local 974 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64, 975 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink, 976 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include 977 tstr in the tbuf output. 978 979 2011-12-03 Mike Frysinger <vapier (a] gentoo.org> 980 981 * Makefile.in: Delete all dependency rules. 982 * aclocal.m4, configure: Regenerate. 983 984 2011-10-19 Mike Frysinger <vapier (a] gentoo.org> 985 986 * configure: Regenerate after common/acinclude.m4 update. 987 988 2011-10-17 Mike Frysinger <vapier (a] gentoo.org> 989 990 * configure.ac: Change include to common/acinclude.m4. 991 * aclocal.m4, configure: Regenerate. 992 993 2011-10-17 Mike Frysinger <vapier (a] gentoo.org> 994 995 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER 996 call. Replace common.m4 include with SIM_AC_COMMON. 997 * configure: Regenerate. 998 999 2011-09-28 Mike Frysinger <vapier (a] gentoo.org> 1000 1001 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns. 1002 1003 2011-07-05 Mike Frysinger <vapier (a] gentoo.org> 1004 1005 * interp.c (sim_do_command): Delete. 1006 1007 2011-07-01 Mike Frysinger <vapier (a] gentoo.org> 1008 1009 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from 1010 stat_map_32 and stat_map_64. 1011 (cb_libgloss_stat_map_32): New stat map. 1012 (stat_map_32, stat_map_64): New stat map pointers. 1013 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and 1014 stat_map_64 to cb_linux_stat_map_64. 1015 (bfin_virtual_init): New function. 1016 (sim_create_inferior): Call bfin_virtual_init for all other envs. 1017 1018 2011-06-22 Mike Frysinger <vapier (a] gentoo.org> 1019 1020 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to 1021 sc.result2 and dreg 2 to sc.errcode. 1022 1023 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1024 1025 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0, 1026 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and 1027 ASHIFT accumulator insns. 1028 1029 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1030 1031 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG. 1032 (lshiftrt): Likewise. 1033 1034 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1035 1036 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc 1037 rather than get_extended_acc in LSHIFT insns. 1038 1039 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1040 1041 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU. 1042 Check MM once when mmod is M_FU to match M_TFU better. 1043 1044 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1045 1046 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than 1047 32, perform a left shift. Update the corresponding AV bit. Set 1048 AZ when the low 32bits are also zero. 1049 1050 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1051 1052 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns, 1053 call lshift only when count is positive. Otherwise, call ashiftrt. 1054 With arithmetic right shift insns, call ashiftrt when the value is 1055 small enough, otherwise call lshift. 1056 1057 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1058 1059 * bfin-sim.c (extract_mult): Call saturate_s16 directly when 1060 mmod is M_IH rather than computing the result by hand. 1061 1062 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1063 1064 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value 1065 before saturation, set sat when more cases saturate, and set the 1066 overflow bit based on these results. For M_TFU, M_IU, M_FU, and 1067 M_W32, change the max values compared against. 1068 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1 1069 when processing MAC1 and pass v_0 when processing MAC0. Combine 1070 the results into the V/VS ASTAT bits. 1071 1072 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1073 1074 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set 1075 and mmod is M_IU. Call saturate_s16 when MM is set and mmod 1076 is M_TFU. 1077 1078 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1079 1080 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and 1081 allow MM to sign extend all the time. 1082 (decode_macfunc): Likewise. Drop sign extension of unsigned 1083 values. 1084 1085 2011-06-18 Robin Getz <robin.getz (a] analog.com> 1086 1087 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">". 1088 (decode_macfunc): Likewise when mmod is M_IH. 1089 1090 2011-06-18 Mike Frysinger <vapier (a] gentoo.org> 1091 1092 * interp.c (sim_create_inferior): Change free to freeargv. 1093 1094 2011-06-04 Mike Frysinger <vapier (a] gentoo.org> 1095 1096 * machs.c (bf534_dev, bf537_dev): Add glue-or devices. 1097 (bf537_port): Define applicable devices with PORT to the glue-or 1098 devices instead of SIC. 1099 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic. 1100 Only parse reg/type when the device has an address. Move the call 1101 to dv_bfin_hw_port_parse up before slash check. 1102 1103 2011-06-04 Mike Frysinger <vapier (a] gentoo.org> 1104 1105 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the 1106 BFIN_SIC_TO_CEC_PORTS definition. 1107 (SIC_PORTS): New define. 1108 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, 1109 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, 1110 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): 1111 Delete old layouts. 1112 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports, 1113 bfin_sic_561_ports): Define new layouts with SIC_PORTS(). 1114 (bfin_sic_finish): Change reference to bfin_sic_50x_ports, 1115 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports 1116 to bfin_sic2_ports. Change reference to bfin_sic_533_ports, 1117 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports. 1118 Change reference to bfin_sic_54x_ports to bfin_sic3_ports. 1119 * machs.c (bfin_port_layout): New structure. 1120 (bfin_model_data): Add new "port" and "port_count" members. 1121 (PORT, SIC): New defines. 1122 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port, 1123 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port): 1124 Move and redefine port layout from dv-bfin_sic.c to here. 1125 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port, 1126 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port, 1127 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port, 1128 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port, 1129 bf548_port, bf549_port): New defines. 1130 (bfin_model_data): Link in new bfin_port_layout.port member. 1131 (dv_bfin_hw_port_parse): New function. 1132 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function. 1133 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for 1134 bfin_sic links with new dv_bfin_hw_port_parse function. 1135 1136 2011-06-03 Mike Frysinger <vapier (a] gentoo.org> 1137 1138 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation. 1139 1140 2011-05-25 Mike Frysinger <vapier (a] gentoo.org> 1141 1142 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL. 1143 1144 2011-05-25 Mike Frysinger <vapier (a] gentoo.org> 1145 1146 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ... 1147 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ... 1148 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ... 1149 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ... 1150 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ... 1151 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ... 1152 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ... 1153 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ... 1154 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ... 1155 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ... 1156 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ... 1157 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ... 1158 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ... 1159 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ... 1160 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ... 1161 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ... 1162 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ... 1163 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ... 1164 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ... 1165 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ... 1166 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ... 1167 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ... 1168 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ... 1169 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ... 1170 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ... 1171 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ... 1172 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ... 1173 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ... 1174 * machs.h: ... here. 1175 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac. 1176 1177 2011-05-25 Mike Frysinger <vapier (a] gentoo.org> 1178 1179 * Makefile.in (dv-bfin_pfmon.o): New target. 1180 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon. 1181 * configure: Regenerated. 1182 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files. 1183 * machs.c: Add include new bfin_pfmon.h. 1184 (bfin_core_dev): Add pfmon. 1185 1186 2011-05-25 Mike Frysinger <vapier (a] gentoo.org> 1187 1188 * machs.c (bf526_roms): Add a region with rev of 2. 1189 (bf54x_roms): Add regions with rev of 4. 1190 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and 1191 bf54x_l1-0.4.h headers. 1192 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h: 1193 New header files. 1194 1195 2011-05-14 Mike Frysinger <vapier (a] gentoo.org> 1196 1197 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6) 1198 check for SP reg. 1199 1200 2011-05-14 Mike Frysinger <vapier (a] gentoo.org> 1201 1202 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a 1203 local uart. When LOOP_ENA is set in mcr, write to the saved byte 1204 and count fields of the uart. 1205 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte 1206 and bfin_uart_get_next_byte. 1207 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count 1208 check first, and skip the remaining code when LOOP_ENA is set in mcr. 1209 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument. 1210 (bfin_uart_get_next_byte): Likewise. 1211 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define. 1212 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when 1213 calling bfin_uart_write_byte and bfin_uart_get_next_byte. 1214 1215 2011-05-09 Mike Frysinger <vapier (a] gentoo.org> 1216 1217 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits 1218 from uart->lsr before setting them. 1219 1220 2011-04-27 Mike Frysinger <vapier (a] gentoo.org> 1221 1222 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array. 1223 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap, 1224 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap, 1225 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap, 1226 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap): 1227 Likewise. 1228 1229 2011-04-26 Mike Frysinger <vapier (a] gentoo.org> 1230 1231 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function. 1232 (bfin_gpio_io_write_buffer): Store the current port state into 1233 "data", and call bfin_gpio_forward_ouput when the data or dir 1234 MMRs are updated. 1235 (bfin_gpio_ports): Change p0..p15 to bidirect_port. 1236 1237 2011-04-26 Mike Frysinger <vapier (a] gentoo.org> 1238 1239 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member. 1240 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions. 1241 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the 1242 mask a or mask b MMRs are written. 1243 (bfin_gpio_port_event): When handling edge gpios, set the bit in 1244 int_state, call bfin_gpio_forward_ints, and then clear the bit. 1245 When handling level gpios, clear/set the bit in int_state rather 1246 than returning immediately. Call bfin_gpio_forward_ints instead 1247 of checking mask[ab] and calling HW_TRACE/hw_port_event directly. 1248 1249 2011-04-16 Mike Frysinger <vapier (a] gentoo.org> 1250 1251 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for 1252 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and 1253 BYTEUNPACK. 1254 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK, 1255 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24. 1256 1257 2011-04-14 Mike Frysinger <vapier (a] gentoo.org> 1258 1259 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling 1260 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, 1261 and BYTEUNPACK insns. 1262 1263 2011-04-11 Mike Frysinger <vapier (a] gentoo.org> 1264 1265 * dv-bfin_sic.c (bfin_sic_port_event): New helper function. 1266 (bfin_sic_52x_port_event, bfin_sic_537_port_event, 1267 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level 1268 in the trace output, and call the new bfin_sic_port_event func. 1269 1270 2011-04-11 Mike Frysinger <vapier (a] gentoo.org> 1271 1272 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. 1273 1274 2011-04-01 Mike Frysinger <vapier (a] gentoo.org> 1275 1276 * dv-bfin_otp.c (bfin_otp_ports): Declare. 1277 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. 1278 1279 2011-03-29 Mike Frysinger <vapier (a] gentoo.org> 1280 1281 * configure: Regenerate after common/aclocal.m4 changes. 1282 1283 2011-03-28 Robin Getz <robin.getz (a] analog.com> 1284 1285 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 1286 and add to casted low 16bits of A0.L and store in val0. Cast high 1287 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and 1288 store in val1. Delete bit checks of val0 and val1. 1289 1290 2011-03-26 Robin Getz <robin.getz (a] analog.com> 1291 1292 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when 1293 the result was 0x80000000 for RND12 subtraction. 1294 1295 2011-03-26 Robin Getz <robin.getz (a] analog.com> 1296 1297 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. 1298 1299 2011-03-24 Mike Frysinger <vapier (a] gentoo.org> 1300 1301 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every 1302 major code flow point. 1303 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just 1304 before calling hw_port_event on ourselves. 1305 (bfin_sic_52x_port_event, bfin_sic_537_port_event, 1306 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE 1307 at the start of the function. 1308 1309 2011-03-24 Mike Frysinger <vapier (a] gentoo.org> 1310 1311 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. 1312 Normalize "level" to 0/1 values. Shift "level" over by "my_port". 1313 Invert port->both bit check. 1314 1315 2011-03-24 Mike Frysinger <vapier (a] gentoo.org> 1316 1317 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the 1318 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. 1319 1320 2011-03-23 Mike Frysinger <vapier (a] gentoo.org> 1321 1322 * TODO: Document some known SIC issues. 1323 1324 2011-03-23 Mike Frysinger <vapier (a] gentoo.org> 1325 1326 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. 1327 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. 1328 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 1329 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. 1330 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. 1331 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. 1332 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. 1333 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. 1334 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. 1335 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. 1336 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. 1337 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. 1338 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. 1339 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. 1340 1341 2011-03-23 Mike Frysinger <vapier (a] gentoo.org> 1342 1343 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. 1344 1345 2011-03-23 Mike Frysinger <vapier (a] gentoo.org> 1346 1347 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. 1348 1349 2011-03-23 Robin Getz <robin.getz (a] analog.com> 1350 1351 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended 1352 value for the VIT_MAX insn, and mask off the result when done. 1353 1354 2011-03-23 Robin Getz <robin.getz (a] analog.com> 1355 1356 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, 1357 and set A0 to a0_lo when up_lo is false. 1358 1359 2011-03-23 Robin Getz <robin.getz (a] analog.com> 1360 1361 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of 1362 saturate_s40, and use the v parameter to update the AV bit. Set the 1363 AC bit only when the final result is 0. 1364 1365 2011-03-23 Mike Frysinger <vapier (a] gentoo.org> 1366 1367 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. 1368 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, 1369 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, 1370 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): 1371 Encode ids with the ENC macro. 1372 (bfin_sic_52x_port_event, bfin_sic_537_port_event, 1373 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx 1374 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. 1375 (bfin_sic_533_port_event): Delete. 1376 (bfin_sic_finish): Call set_hw_port_event with 1377 bfin_sic_537_port_event for BF533 and BF59x targets. 1378 1379 2011-03-23 Robin Getz <robin.getz (a] analog.com> 1380 1381 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for 1382 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. 1383 1384 2011-03-23 Mike Frysinger <vapier (a] gentoo.org> 1385 1386 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, 1387 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): 1388 Change bfin_gpio addresses from f/g/h to 5/6/7. 1389 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. 1390 1391 2011-03-17 Mike Frysinger <vapier (a] gentoo.org> 1392 1393 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. 1394 * configure: Regenerate. 1395 * config.in: Regenerate. 1396 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using 1397 kill or pread. 1398 1399 2011-03-15 Mike Frysinger <vapier (a] gentoo.org> 1400 1401 * Makefile.in (dv-bfin_gpio.o): New target. 1402 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. 1403 * configure: Regenerate. 1404 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. 1405 * machs.c: Include dv-bfin_gpio.h. 1406 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, 1407 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): 1408 Delete GPIO memory stubs. 1409 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, 1410 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO 1411 peripheral devices. 1412 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. 1413 1414 2011-03-15 Mike Frysinger <vapier (a] gentoo.org> 1415 1416 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, 1417 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, 1418 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, 1419 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, 1420 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, 1421 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, 1422 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, 1423 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, 1424 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, 1425 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, 1426 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, 1427 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, 1428 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, 1429 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, 1430 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, 1431 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, 1432 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. 1433 1434 2011-03-15 Robin Getz <robin.getz (a] analog.com> 1435 1436 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds 1437 and subs. 1438 1439 2011-03-15 Robin Getz <robin.getz (a] analog.com> 1440 1441 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. 1442 1443 2011-03-15 Robin Getz <robin.getz (a] analog.com> 1444 1445 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the 1446 high bit is set after extract_mult. 1447 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc 1448 functions. Use these to update the AN bit. 1449 1450 2011-03-15 Robin Getz <robin.getz (a] analog.com> 1451 1452 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to 1453 the extract_mult functions. Include these when updating the V, VS, 1454 and V_COPY bits. 1455 1456 2011-03-15 Robin Getz <robin.getz (a] analog.com> 1457 1458 * bfin-sim.c (astat_names): New global bit array. 1459 (decode_CC2stat_0): Delete local astat_name and astat_names. 1460 (decode_psedodbg_assert_0): Move hardcoded offset into a variable. 1461 Print out ASTAT bit values when checking an ASTAT register. 1462 1463 2010-03-15 Robin Getz <robin.getz (a] analog.com> 1464 1465 * bfin-sim.c (extract_mult): Handle M_IU. 1466 1467 2011-03-05 Mike Frysinger <vapier (a] gentoo.org> 1468 1469 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, 1470 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, 1471 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, 1472 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, 1473 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, 1474 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, 1475 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, 1476 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, 1477 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, 1478 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, 1479 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, 1480 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, 1481 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, 1482 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, 1483 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, 1484 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, 1485 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, 1486 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, 1487 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, 1488 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, 1489 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, 1490 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, 1491 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, 1492 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, 1493 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, 1494 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, 1495 tconfig.in: New Blackfin port. 1496
Indexes created Mon Oct 26 00:26:21 UTC 2026