Home | History | Annotate | Line # | Download | only in dist
RELNOTES revision 1.1
      1                 Internet Systems Consortium DHCP Distribution
      2                             Version 4.4.1
      3                            28 February 2018
      4 
      5                              Release Notes
      6 
      7                               NEW FEATURES
      8 
      9 Please note that that ISC DHCP is now licensed under the Mozilla Public License,
     10 MPL 2.0. Please see https://www.mozilla.org/en-US/MPL/2.0/ to read the MPL 2.0
     11 license terms.
     12 
     13 The areas of focus for ISC DHCP 4.4 were:
     14 
     15 1. Dynamic DNS additions
     16 2. dhclient improvements
     17 3. Support for dynamic shared libraries
     18 
     19 Dynamic DNS Improvements:
     20 
     21 - We added three new server configuration parameters which influence DDNS
     22   conflict resolution:
     23 
     24     1. ddns-dual-stack-mixed-mode - alters DNS conflict resolution behavior
     25     to mitigate issues with non-compliant clients in dual stack environments.
     26 
     27     2. ddns-guard-id-must-match - relaxes the DHCID RR client id matching
     28     requirement of DNS conflict resolution.
     29 
     30     3. ddns-other-guard-is-dynamic - alters dual-stack-mixed-mode behavior to
     31     allow unguarded DNS entries to be overwritten in certain cases
     32 
     33 - The server now honors update-static-leases parameter for static DHCPv6
     34   hosts.
     35 
     36 dhclient Improvements:
     37 
     38   - We've added three command line parameters to dhclient:
     39 
     40     1. --prefix-len-hint - directs dhclient to use the given length as
     41     the prefix length hint when requesting prefixes
     42 
     43     2. --decline-wait-time - instructs the client to wait the given number
     44     of seconds after declining an IPv4 address before issuing a discover
     45 
     46     3. --address-prefix-len - specifies the prefix length passed by dhclient
     47     into the client script (via the environment variable ip6_prefixlen) with
     48     each IPv6 address.  We added this parameter because we have changed the
     49     default value from 64 to 128 in order to be compliant with RFC3315bis
     50     draft (-09, page 64) and RFC5942, Section 4, point 1.
     51     **WARNING**: The new default value of 128 may not be backwardly compatible
     52     with your environment. If you are operating without a router, such as
     53     between VMs on a host, you may find they cannot see each other with prefix
     54     length of 128. In such cases, you'll need to either provide routing or use
     55     the command line parameter to set the value to 64. Alternatively you may
     56     change the default at compile time by setting DHCLIENT_DEFAULT_PREFIX_LEN
     57     in includes/site.h.
     58 
     59   - dhclient will now generate a DHCPv6 DECLINE message when the client script
     60     indicates a DAD failure
     61 
     62 Dynamic shared library support:
     63 
     64   Configure script, configure.ac+lt, which supports libtool is now provided
     65   with the source tar ball.  This script can be used to configure ISC DHCP
     66   to build with libtool and thus use dynamic shared libraries.
     67 
     68 Other Highlights:
     69 
     70  - The server now supports dhcp-cache-threshold for DHCPv6 operations
     71  - The server now supports DHPv6 address allocation based on EUI-64 DUIDs
     72  - Experimental support for alternate relay port in the both the server
     73    and relay for IPv4, IPv6 and 4o6 (see: draft-ietf-dhc-relay-port-10.txt)
     74 
     75 For information on how to install, configure and run this software, as
     76 well as how to find documentation and report bugs, please consult the
     77 README file.
     78 
     79 ISC DHCP uses standard GNU configure for installation. Please review the
     80 output of "./configure --help" to see what options are available.
     81 
     82 The system has only been tested on Linux, FreeBSD, and Solaris, and may not
     83 work on other platforms. Please report any problems and suggested fixes to
     84 <dhcp-users (a] isc.org>.
     85 
     86 ISC DHCP is open source software maintained by Internet Systems
     87 Consortium.  This product includes cryptographic software written
     88 by Eric Young (eay (a] cryptsoft.com).
     89 
     90                 Changes since 4.4.0 (New Features)
     91 - none
     92 		Changes since 4.4.0 (Bug Fixes)
     93 
     94 - A delayed-ack value of 0 (the default), now correctly disables the delayed
     95   feature.  A change in 4.4.0 prohibited lease updates marking leases active
     96   from be written to the lease file when delayed-ack is 0. This in turn,
     97   caused servers to lose active lease assignments upon restart.
     98   [ISC-Bugs #47141]
     99 
    100 ! Option reference count was not correctly decremented in error path
    101   when parsing buffer for options. Reported by Felix Wilhelm, Google
    102   Security Team.
    103   [ISC-Bugs #47140]
    104   CVE: CVE-2018-5733
    105 
    106 ! Corrected an issue where large sized 'X/x' format options were causing
    107   option handling logic to overwrite memory when expanding them to human
    108   readable form. Reported by Felix Wilhelm, Google Security Team.
    109   [ISC-Bugs #47139]
    110   CVE: CVE-2018-5732
    111 
    112                 Changes since 4.4.0b1 (New Features)
    113 
    114 - Duplicate address detection when binding to a new IPv6 address was added
    115   to the following dhclient scripts: linux,freebsd,netbsd,openbsd, and macos.
    116   The scripts will check for DAD errors after binding to a new IPv6 address
    117   for at most --dad-wait-time seconds.  If a DAD error is detected the script
    118   will exit with a value of 3, instructing dhclient to decline the address. If
    119   dad-wait-time is zero (the default), DAD error checking is not peformed.
    120   [ISC-Bugs 46805]
    121 
    122 - Support for sending and receiving additional DHCP4 options has been added
    123   to both the dhcpd and dhclient.  Specifically: option codes 93,94, and 97
    124   (RFC 4578); code 150 (RFC 5859); and codes 209,219, and 211 (RFC 5071).
    125   Beyond configuring, sending, requesting, and receiving these options neither
    126   server nor client apply any additional logic based on their values.
    127   Thanks to Peter Lewis for requesting this change.
    128   [ISC-Bugs 47062]
    129 
    130 		Changes since 4.4.0b1 (Bug Fixes)
    131 
    132 - Added clarifying text to dhcpd.conf.5 explaining the class match expressions
    133   cannot rely on the results of executable statements.
    134   [ISC-Bugs #45451]
    135 
    136 - Fixed a bug which causes dhcpd and dhclient to crash on certain
    137   systems when given relative path names for lease or pid files on
    138   the command line.  Affected systems are those on which the C library
    139   function, realpath() does not support a second parameter value of
    140   NULL (see manpages for realpath(3)).
    141   [ISC-Bugs #46957]
    142 
    143 - Fixed a build issue when building with embedded BIND9 under OpenBSD that
    144   was causing BIND9 build to not generate dns/enumclass.h and dns/enumtype.h.
    145   [ISC-Bugs #46971]
    146 
    147 - Added <dhcp>/m4/README to the distribution tarball.  Some versions of
    148   ac_local() treat the absence of the m4 subdirectory as error rather than
    149   warning.  This was causing the call to autoreconf, necessary for building
    150   with libtool, to fail.
    151   [ISC-Bugs #47075]
    152 
    153 		Changes since 4.4.0a1 (New Features)
    154 
    155 - Added experimental support for relay port (draft-ietf-dhc-relay-port-10.txt)
    156   feature for DHCPv4, DHCPv6 and DHCPv4-over-DHCPv6.  Relay port has to be
    157   enabled at compile time via --enable-relay-port and is fully backward
    158   compatible (i.e. works with previous implementations of servers and relays
    159   using the standard ports).  A new --rp <relay-port> command line option
    160   specifies to dhcrelay an alternate source port for upstream (i.e. toward
    161   the server) messages.  Thanks to Naiming Shen and Enke Chen of Cisco
    162   systems for submitting these patches.
    163   [ISC-Bugs #44535]
    164 
    165 - Added --release-on-roam to dhcpd server. When enabled and the server detects
    166   that a DHCPv6 client (IAID+DUID) has roamed to a new network, it will release
    167   the pre-existing leases on the old network and emit a log statement similar
    168   to the following:
    169 
    170       "Client: <id> roamed to new network, releasing lease: <address>"
    171 
    172   The server will carry out all of the same steps that would normally occur
    173   when a client explicitly releases a lease.  This behavior is disabled by
    174   default and may only be specified globally. Prior to this the server renders
    175   the leases unavailable until they expire or the server is restarted. Clients
    176   that need leases in multiple networks must supply a unique IAID in each IA.
    177   When release-on-roam is disabled (the default) the server maintains the
    178   prior behavior of making such leases unavailable until they expire or the
    179   server is restarted. Clients that need leases in multiple networks must
    180   supply a unique IAID in each IA.  This parameter may only be specified at
    181   the global level.  Thanks to Fernando Soto from BlueCat Networks for
    182   suggesting this change.
    183   [ISC-Bugs #44576]
    184   [ISC-Bugs #46849]
    185 
    186 - Support for delayed-ack is now compiled in by default. Prior to this
    187   it had to be enabled at compile time via --enable-delayed-acks. The
    188   default value for delayed-ack, however, has been changed from 28 to 0
    189   (i.e. disabled).  This was done to minimize the impact on users not
    190   currently using the feature.  Please note that the delayed-ack feature
    191   is not currently compatible with support for DHPCv4-over-DHCPv6 so
    192   when a 4to6 port command line argument enables this in the server the
    193   delayed-ack value is reset to 0.
    194   [ISC-Bugs #42446]
    195 
    196 - The server (-6) now honors the parameter, update-static-leases, for static
    197   (fixed-address6) DHCPv6 leases.  It is worth noting that because stateful
    198   data is not retained by the server for static leases, each time a client
    199   requests or renews a static lease, the server will perform DDNS updates for
    200   it. This may have significant performance implications for environments
    201   with many clients that request or renew static leases often. Similarly,
    202   the DNS entries will not be removed by server when a client issues a RELEASE
    203   nor if the lease is deleted from the configuration. In such cases the DNS
    204   entries must be removed manually. This feature is disabled by default.
    205   Thanks to both Bill Shirley and dgutier-at-cern-dot-ch for requesting
    206   this change.
    207   [ISC-Bugs #34097]
    208   [ISC-Bugs #41054]
    209   [ISC-Bugs #41450]
    210 
    211 - Added to the server (-6) a new statement, local-address6, which specifies
    212   the source address of packets sent by the server. An additional flag,
    213   bind-local-address6, disabled by default, binds the service socket to
    214   to local-address6. Note that bind-local-address does not work with direct
    215   clients: a relay has to forward packets to the server using the
    216   local-address6 destination.
    217   [ISC-Bugs #46084]
    218 
    219 		Changes since 4.4.0a1 (Bugs)
    220 
    221 - The server now recognizes environment variables PATH_DHCPD_DB and
    222   PATH_DHCPD_PID.  These had been incorrectly compiled out of the code
    223   unless DHCPv6 support was disabled. Additionally, the server man
    224   pages were corrected to accurately reflect how the server chooses
    225   file names (see lease-file-name and pid-file-name statements). Thanks
    226   to Fernando Soto at Bluecat Networks for bringing this matter to our
    227   attention.
    228   [ISC-Bugs #46859]
    229 
    230 - Removed an "Impossible condition" error upon exit in the dhcpd server that
    231   has been shutdown via OMAPI. This condition was only apparent under Solaris
    232   when building with --enable-use-sockets and --enable-ipv4-pktinfo.
    233   [ISC-Bugs #36118]
    234 
    235 - Corrected some minor Coverity issues: CID 1426059, 1426058, and 1426057.
    236   [ISC-Bugs #46836]
    237 
    238 - Added missing text to dhclient.8 and expanded release note coverage
    239   for --address-prefix-len changes.
    240 
    241 		Changes since 4.3.6 (New Features)
    242 
    243 - Added --enable-bind-install to install embedded bind includes and
    244   libraries. Default is to not install them (it was the previous
    245   behavior). If you'd like to change the includedir and/or libdir
    246   installation directories to something different than for ISC DHCP
    247   you must pass them using the --with-bind-extra-config configuration
    248   arguments.
    249   [ISC-Bugs #39318]
    250 
    251 - Added support of dynamic shared libraries with libtool. A new
    252   --enable-libtool configuration parameter is available but
    253   should not be used directly: *please* read the build configuration
    254   section in the README file for the recommended procedure.
    255   [ISC-Bugs #29402]
    256 
    257 - IPv6 operation now supports an EUI-64 based address allocation which will
    258   calculate addresses for clients with EUI-64 DUIDs based on those DUIDs when
    259   enabled by setting use-eui-64 true.  The parameter may defined down to the
    260   pool scope.  Note this feature must be compiled in by defining EUI_64 in
    261   includes/site.h. This flag is undefined by default.
    262   [ISC-Bugs #43927]
    263 
    264 - The directory includes/isc-dhcp and it's only occupant, dst.h, have
    265   been removed from the source tree.  They are obsolete for branches
    266   other than v4_1_esv.
    267   [ISC-bugs #45541]
    268 
    269 - Replaced ISC licensing with Mozilla Public License, MPL 2.0 licensing
    270   throughout.  Please see https://www.mozilla.org/en-US/MPL/2.0/ to read
    271   the MPL 2.0 license terms.
    272   [ISC-Bugs #45541]
    273 
    274 - Load balancing for failover peers can now be disabled by setting
    275   "load balance max secs" to 0. Doing so for both peers means both
    276   servers will respond to all DHCPDISCOVERs or DHCPREQUESTs as soon as
    277   they are received.
    278   [ISC-Bugs #39669]
    279 
    280 - Added a new dhclient command line parameter, --prefix-len-hint <length>.
    281   When used in conjunction with -P, it directs dhclient to use the given
    282   length as the prefix length hint when requesting prefixes.  Thanks to both
    283   Indy, of the FireballISO open source project and H. Peter Anvin for
    284   suggesting this change.
    285   [ISC-Bugs #43792]
    286   [ISC-Bugs #35112]
    287   [ISC-Bugs #32228]
    288   [ISC-Bugs #29470]
    289 
    290 - dhclient will now wait for 10 seconds after declining an IPv4 address
    291   before issuing a discover.  This is in keeping with RFC 2131, section 3.1.5.
    292   Prior to this dhclient did not wait at all. The amount of time dhclient
    293   waits can be specified via a new command line parameter:
    294   --decline-wait-time <seconds>.  A value of zero equates to no wait at all.
    295   Thanks to Pavel Kankovsky for bringing this matter to our attention.
    296   **NOTE: THIS IS CHANGE IN DEFAULT BEHAVIOR.
    297   [ISC-Bugs #45457]
    298 
    299 - dhclient will now include the lease address when logging DHCPOFFERs,
    300   DHCPREQUESTs, DHCPACKs, DHCPRELEASEs, and DHCPDECLINEs.  Additionally,
    301   DHCPOFFERs will be logged before their corresponding DHCPREQUESTs are
    302   sent and logged.
    303   [ISC-Bugs #2729]
    304 
    305 - When given the -T command line argument, in addition to reading the
    306   current lease file, the server will write the leases to a temporary
    307   lease file.  This can help detect issues in server configuration that
    308   only surface when leases are written to the file.  The current lease
    309   file will not be modified and the temporary lease file is removed upon
    310   completion of the test.
    311   [ISC-Bugs #22267]
    312 
    313 - dhclient will now generate a DHCPv6 DECLINE message containing all IA_NA
    314   addresses which for which the client script indicates a DAD failure. After
    315   receiving the DECLINE reply, dhclient will restart the solicit process.
    316   Note, the client script must exit with a value of 3 to signify that the
    317   address failed DAD.  Thanks to Jiri Popelka of Red Hat for submitting the
    318   patch that was the foundation for this change.
    319   **NOTE: THIS IS CHANGE IN DEFAULT BEHAVIOR.
    320   [ISC-Bugs #21237]
    321   [ISC-Bugs #23357]
    322   [ISC-Bugs #36966]
    323 
    324 - Replaced compilation option, enable-secs-byteorder, with a run-time, server
    325   configuration parameter, check-secs-byte-order.  When enabled, the
    326   server will check for clients that do the byte ordering on the secs field
    327   incorrectly.  This field should be in network byte order but some clients
    328   get it wrong.  When this parameter is enabled the server will examine the
    329   secs field and if it looks wrong (high byte non zero and low byte zero) swap
    330   the bytes.  The default is disabled.  This parameter is only useful when
    331   doing load balancing within failover.
    332   [ISC-Bugs #45364]
    333 
    334 - The default value for server (-6) parameter, prefix-length-mode, has been
    335   changed from "exact" to "prefer". In "prefer" mode the server will offer
    336   the first available prefix with the same length as that requested by the
    337   client. If none are found then it will offer the first available prefix of
    338   any length.  This is more in line with with RFC 8168 and should improve
    339   the out-of-the-box user experience.
    340   **NOTE: THIS IS CHANGE IN DEFAULT BEHAVIOR.
    341   [ISC-Bugs #45615]
    342 
    343 - Added support for 'dhcp-cache-threshold' to IPv6 operation: If a client
    344   renews before 'dhcp-cache-threshold' percent of its lease has elapsed
    345   (default 25%), the server will reuse the allocated lease (provide a
    346   lease within the currently allocated lease-time) rather than extend or
    347   renew the lease.  This allows the server to reply without needlessly
    348   writing leases to disk.  The preferred and valid lease lifetimes
    349   sent to the client will be reduced by the age of the lease. The option
    350   may be specified down to the pool level and is supported for all three
    351   pool types: NA, TA, and PD.
    352   [ISC-Bugs #45292]
    353 
    354 - Added three new server configuration parameters which influence DDNS:
    355   1. ddns-dual-stack-mixed-mode - alters DNS conflict resolution behavior
    356   to mitigate issues with non-compliant clients in dual stack environments.
    357 
    358   2. ddns-guard-id-must-match - relaxes the DHCID RR client id matching
    359   requirement of DNS conflict resolution.
    360 
    361   3. ddns-other-guard-is-dynamic - alters dual-stack-mixed-mode behavior to
    362   allow unguarded DNS entries to be overwritten in certain cases
    363   [ISC-Bugs #42620]
    364   [ISC-Bugs #42621]
    365   [ISC-Bugs #44753]
    366 
    367 - A "key-algorithm <algorithm>" statement has been added to omshell to
    368   allow the specification of the key algorithm to use during transaction
    369   authentication.  Prior to this it was hard-coded to be hmac-md5. It now
    370   supports all of the same algorithms as the dhcpd server: hmac-md5 (the
    371   default), hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384, and hmac-sha512.
    372   [ISC-Bugs #46771]
    373 
    374 - Added a server configuration parameter, persist-eui-64-leases, which
    375   determines whether or not EUI-64 based leases are written to the
    376   leases file.  Default is true.
    377   [ISC-Bugs #45046]
    378 
    379 - Changed the default value of the prefix length passed by dhclient into the
    380   client script for each IPv6 address from 64 to 128. This was done to comply
    381   with RFC3315bis draft (-09, page 64) and RFC5942, Section 4, point 1.
    382   In addition, dhclient now supports a command line argument,
    383   --address-prefix-len, which may be used to override the default value.
    384   **WARNING**: This change may not be backwardly compatible with your
    385   environment. If you are operating without a router, such as between VMs on
    386   a host, you may find they cannot see each with prefix length of 128. In
    387   such cases, you'll need to either provide routing or use the command line
    388   parameter to set the value to 64. Alternatively you may change the default
    389   at compile time by setting DHCLIENT_DEFAULT_PREFIX_LEN in includes/site.h.
    390   [ISC-Bugs #23252]
    391   [ISC-Bugs #37221]
    392 
    393 - Modified dhclient (-6) to bypass sending a confirm (INIT REBOOT) when it has
    394   only expired address associations.  Thanks to Jiri Popelka at Red Hat for
    395   raising the issue and submitting the patch.
    396   [ISC-Bugs #22675]
    397 			Changes since 4.3.6 (Bugs):
    398 
    399 - Corrected an issue where the server would return a client's previously
    400   released prefix lease even when the client provides a prefix length
    401   hint that does not match the prior lease.  Now the server will only
    402   return the previous lease if it exactly matches the hint.  If not
    403   it will attempt to allocate a new prefix based on the hint and the
    404   prefix-length-mode.  Thanks to Tim DeNike - Lightspeed Communications
    405   for pointing out the error of our ways.
    406   [ISC-bugs #45780]
    407 
    408 - Added explicit include of BIND9 isc/util.h to adapt to revisions
    409   in BIND9 (see BIND9 ticket #46311).  Prior to this the build was failing
    410   with implicit function declarations errors for POST() and INSIST().
    411   [ISC-bugs #46332]
    412 
    413 - Added to code ignore empty IPv4 host name option (code 12). While RFC 2132
    414   states the option cannot be empty, some clients are apparently capable of
    415   sending it. Prior to this the server was attempting to use it and store it
    416   in the lease file causing issues with DDNS and so forth.
    417   [ISC-bugs #43786]
    418 
    419 - Corrected dhclient command line parsing for --dad-wait-time that causes
    420   even valid values to fail as invalid on some environments.
    421   [ISC-Bugs #46535]
    422 
    423 - Replaced iasubopt::heap_index with separate values for active and inactive
    424   heaps: iasubopt::active_index and iasubopt::inactive_index.  This was done
    425   to accommodate a change in behavior in BIND9 isc_heap_delete().
    426   [ISC-bugs #46719]
    427 
    428 ! Plugged a socket descriptor leak in OMAPI, that can occur when there is
    429   data pending to be written to an OMAPI connection, when the connection
    430   is closed by the reader. Thanks to Pavel Zhukov at RedHat for bringing
    431   this issue to our attention and whose patch helped guide us in the right
    432   direction.
    433   [ISC-Bugs #46767]
    434 
    435 - The ability of the server to send back dhcp6.vendor-opts values has been
    436   restored. A change in 4.3.5 (see #29246) which enabled it to send back the
    437   FQDN option unfortunately broke its ability send back dhcp6.vendor-opts.
    438   Thanks to Sumant Gupta (sumantgupta at gmail dot com) of Landis+Gry for
    439   bringing this issue to our attention.
    440   [ISC-Bugs #46427]
    441 
    442 			Changes since 4.3.6b1
    443 
    444 - None
    445 
    446 			Changes since 4.3.5
    447 
    448 - The server now allows the client identifier (option 61) to own leases
    449   in more than one subnet concurrently. Prior to this the server would
    450   incorrectly release an existing lease in one subnet prior to assigning
    451   a lease in another subnet. Note that the prior behavior can be still
    452   be achieved by enabling one-lease-per-client. Thanks to both David Zych at
    453   the University of Illinois and Norm Proffitt of Infoblox for reporting
    454   the issue; and Norm for suggesting a solution.
    455   [ISC-Bugs #41358]
    456 
    457 - When replying to a DHCPINFORM, the server will now include options specified
    458   at the pool scope, provided the ciaddr field of the DHCPINFORM is populated.
    459   Prior to this the server only evaluated options down to the subnet scope.
    460   Thanks to Fernando Soto at BlueCat Networks for reporting the issue.
    461   [ISC-Bugs #43219]
    462   [ISC-Bugs #45051]
    463 
    464 - When memory allocation fails in a repeated way the process writes
    465   "Run out of memory." on the standard error and exists with status 1.
    466   [ISC-Bugs #32744]
    467 
    468 - The new lmdb (Lightning Memory DataBase) bind9 configure option is
    469   now disabled by default to avoid the presence of this library to be
    470   detected which can lead to a link failure.
    471   [ISC-Bugs #45069]
    472 
    473 - The linux interface discovery code has been modified to use getifaddrs()
    474   as is done for BSD and OS-X.  Prior to this the code would only recognize
    475   the first address on an interface and thereby omit vlans.
    476   Thanks to Jiri Popelka at Redhat, Marius Tomaschewski at SUSE, and Wei
    477   Kong at Novell, who all submitted patches.
    478   [ISC-Bugs #28761]
    479   [ISC-Bugs #31992]
    480   [ISC-Bugs #25428]
    481   [ISC-Bugs #31940]
    482   [ISC-Bugs #32935]
    483 
    484 - Fixed a bug in OMAPI that causes omshell to crash when a name-value
    485   pair with a zero length value is shipped in an object. Thanks to
    486   Fernando Soto at BlueCat Networks for reporting the issue and
    487   supplying the patch.
    488   [ISC-Bugs #29108]
    489 
    490 - On 64-bit platforms, dhclient now generates the correct value for the
    491   script environment variable, "expiry", the lease expiry value exceeds
    492   0x7FFFFFFF.  Prior to this such values would produce negative values
    493   for expiry in the script environment.
    494   [ISC-Bugs #43326]
    495 
    496 - Common timer logic was modified to cap the maximum timeout values at
    497   0x7FFFFFFF - 1. Values larger than that were causing fatal timer out of
    498   range errors on 64-bit platforms. Thanks to Jiri Popelka at Red Hat for
    499   reporting the issue.
    500   [ISC-Bugs #28038]
    501 
    502 - DHCP6 FQDN option unpacking code now correctly handles values that contain
    503   spaces, special, or non-printable characters.  Prior to this the buffer
    504   size needed was underestimated causing a conversion error message to
    505   be logged and DNS updates to be skipped. Thanks to Fernando Soto at
    506   BlueCat Networks for bringing the matter to our attention.
    507   [ISC-Bugs #43592]
    508 
    509 - When running in -6 mode, dhclient can enforce the require option statement
    510   and will discard offered leases that do not contain all the required
    511   options specified in the client configuration.  If not enabled the client
    512   will still consider such leases.  This must be enabled at compile time
    513   (see ENFORCE_DHCPV6_CLIENT_REQUIRE in includes/site.h). Thanks to
    514   Mritunjaykumar Dubey at Nokia for reporting the issue.
    515   [ISC-Bugs #41473]
    516 
    517 - Altered DHCPv4 lease time calculation to avoid roll over errors on 64-bit
    518   OS systems when using -1 or large values for default-lease-time.  Rollover
    519   values will be replaced with 0x7FFFFFFF - 1.  This alleviates unintentionally
    520   short expiration times being handed out when infinite lease times (-1) in
    521   conjunction with failover.  Our thanks to Alessandro Gherardi for bringing
    522   the issue to our attention.
    523   [ISC-Bugs #41976]
    524 
    525 - Added new compile time option --with-srv-conf-file which specifies a
    526   default location of the server configuration file.
    527   [ISC-Bugs #44765]
    528 
    529 - Added --dad-wait-time parameter to dhclient. It specifies the maximum time,
    530   in seconds, that the client process should wait for the duplicate address
    531   detection to complete before initiating DHCP requests. This value is
    532   propagated to the dhclient script and the script is responsible for waiting
    533   the specified amount of time or until DAD has completed. If the script does
    534   not support it, specifying this parameter has no effect. The default value
    535   is 0 which specifies that the script should not wait for DAD. With this
    536   change the following scripts have been modified to support the new parameter:
    537   freebsd, linux, macos, netbsd, openbsd.
    538   [ISC-Bugs #36169]
    539 
    540 - The server nows checks both the address and length of a prefix delegation
    541   when attempting to match it to a prefix pool.  This ensures the server
    542   responds properly when pool configurations change such that once valid,
    543   "in-pool" delegations are now treated as being invalid.  During lease
    544   file loading at startup, the server will discard any PD leases that
    545   are deemed "out-of-pool" either by address or mis-matched prefix length.
    546   Clients seeking to renew or rebind such leases will get a response of
    547   No Binding in the case of the former, and the prefix delegation with
    548   lifetimes set to zero in the case of the latter. Thanks to Mark Nejedlo
    549   at TDS Telecom for reporting this issue.
    550   [ISC-Bugs #35378]
    551 
    552 - Modified DDNS support initialization such that DNS related ports will only be
    553   opened by the server (dhcpd) at startup if ddns-update-style is not "none";
    554   by dhclient only if and when the it first attempts an update; and never by
    555   dhcrelay.  Prior to this all three always did the initialization at startup
    556   which causes them to always open on and listen for traffic on two random
    557   ports. Thanks to Rodney Beede for reporting this issue.
    558   [ISC-Bugs #45290]
    559   [ISC-Bugs #33377]
    560 
    561 - Added error logging to two memory allocation failure checks. Thanks to Bill
    562   Parker (wp02855 at gmail dot com) for reporting the issue.
    563   [ISC-Bugs #41185]
    564 
    565 - Corrected a dhclient -6 issue that caused the client to crash with an
    566   "Impossible condition" error after de-preferencing its only IA binding.
    567   The crash occurred when server configuration changes rendered the existing
    568   binding out-of-range and no other leases were available to offer. Thanks
    569   to Pierre Clerissi for bringing this issue to our attention.
    570   [ISC-Bugs #44373]
    571 
    572 - By defining CALL_SCRIPT_ON_ONETRY_FAIL in includes/site.h, dhclient will
    573   now call the script with reason set to FAIL when run with -1 (one try) and
    574   there are no server responses.  This applies to IPv4 mode only. Thanks for a
    575   patch by Martin Pitt which got to us via Andrew Pollock.
    576   [ISC-bugs #18183]
    577 
    578 - The server now detects failover peers that are not referenced in at least
    579   one pool when run with the command line option for test mode, -T.  Prior to
    580   this the check was performed too far down stream to be detected in test mode.
    581   [ISC-Bugs #29892]
    582 
    583 - Linux script updated. The script is now based on Debian version. It uses
    584   ip tool from iproute2 package and ifconfig is no longer used. This also
    585   addresses an issue of calling arping with inappropriate parameter.
    586   [ISC-bugs #19430]
    587   [ISC-bugs #18111]
    588 
    589 - Changed severity of the log message indicating UDP checksum errors in
    590   the received packets from 'info' to 'debug' to avoid logging excessive
    591   number of false positives when UDP checksum offloading is enabled.
    592   [ISC-bugs #41757]
    593 
    594 - The directory minires has been removed from the source tree.  It has
    595   long been obsolete for branches other than v4_1_esv.  Additionally,
    596   includes/minires.h was renamed includes/ns_name.h.
    597   [ISC-bugs #45471]
    598 
    599 - Replaced ifconfig parameters "add" and "delete" with "alias" and "-alias"
    600   for IPv6 mode in the client scripts, netbsd and openbsd.  This was
    601   preventing IPv6 addresses from being added or removed from interfaces.
    602   Thanks to Tim Dean for reporting this issue.
    603   [ISC-bugs #31573]
    604 
    605 			Changes since 4.3.5b1
    606 
    607 - Corrected a bug which could cause the server to sporadically crash while
    608   loading lease files with the lease-id-format is set to "hex".  Our thanks
    609   to Jay Ford, University of Iowa for reporting the issue.
    610   [ISC-Bugs #43185]
    611 
    612 - Eliminated a noisy, but otherwise harmless debug log statment that may
    613   appear during server startup when building with --enable-binary-leases
    614   and configuring multiple pools in a shared network.  Thanks to Fernando
    615   Soto from BlueCat Networks for reporting the issue and supplying a patch.
    616   [ISC-Bugs #43262]
    617 
    618 			Changes since 4.3.4
    619 
    620 - Fixed util/bindvar.sh error handling.
    621   [ISC-Bugs #41973]
    622 
    623 - Correct error message in relay to use remote id length instead
    624   of circuit id length.
    625   [ISC-Bugs #42556]
    626 
    627 - Add logic to test directory Makefiles to avoid copying Attfile(s)
    628   when building within the source tree.  This eliminates a noisy but
    629   otherwise harmless error message when running "make check".
    630   [ISC-Bugs #41883]
    631 
    632 - Leases are now scrubbed of certain prior use information when pool
    633   re-balancing reassigns them from one FO peer to the other.  This
    634   corrects an issue where leases that were offered but not used
    635   by the client retained the client hostname from the original
    636   client. Thanks to Pavel Polacek, Jan Evangelista Purkyne University
    637   for reporting the issue.
    638   [ISC-Bugs #42008]
    639 
    640 - In the LDAP code and schema add some missing '6' characters to use
    641   the v6 instead of the v4 versions.  Thanks to Denis Taranushin for
    642   reporting this issue and supplying its patch.
    643   [ISC-Bugs #42666]
    644 
    645 - Correct how the pick-first-value expression is written to a lease
    646   file.  Previously it was written as a concat expression due to
    647   a cut and paste error.
    648   [ISC-Bugs #42253]
    649 
    650 - Modify the DDNS code to clean up the PTR record even if there
    651   are issues while cleaning up the A or AAAA records.
    652   [ISC-Bugs #23954]
    653 
    654 - Added global configuration parameter, abandon-lease-time, which determines
    655   the amount of time a lease remains abandoned.  The default is 84600 seconds.
    656   Additionaly, the server now conducts a ping check (if ping checks are
    657   enabled) prior to offering an abandoned lease to client.  Our thanks to
    658   David Zych at University of Illinois for reporting the issue and working
    659   with us to produce a viable solution.
    660   [ISC-Bugs #41815]
    661 
    662 - Correct handling of interface names during interface discovery. This
    663   addresses an issue where interface names of 15 characters in length
    664   could lead to crashes or interface recognition errors during startup
    665   of dhcpd, dhclient, and dhcrelay.
    666   [ISC-Bugs #42226]
    667 
    668 - Updates to contrib/dhcp-lease-list.pl to make it more friendly.
    669   The updates are: looking for the lease file in more places and skipping
    670   the "processing complete" output when creating machine readable
    671   output.  Thanks to Cameron Paine (cbp at null dot net) for the
    672   patch.
    673   [ISC-Bugs #42113]
    674 
    675 - When reusing a lease for dhcp-cache-threshold return the hostname
    676   to the original lease.  Also if the host pointer, UID or hardware address
    677   change don't allow reuse of the lease.
    678   Thanks to Michael Vincent for reporting this and helping us
    679   verify the problem and fix.
    680   [ISC-Bugs #42849]
    681 
    682 - Change dmalloc to use a size_t as the length argument to bring it
    683   in line with the call it will make to malloc().
    684   [ISC-Bugs #40843]
    685 
    686 - If the failover socket can't be bound, close it.  Otherwise if the
    687   user configures an incorrect address in the failover stanza the
    688   server will continue to open new sockets every 90 seconds until
    689   it runs out.
    690   [ISC-Bugs #42452]
    691 
    692 - Add DHCPv4-mode, dhcrelay command line options, "-iu" and "-id", that
    693   allow interfaces to be upstream or downstream respectively.  Upstream
    694   interfaces will accept and forward only BOOTP replies, while downstream
    695   interfaces will accept and forward only BOOTP requests.
    696   [ISC-Bugs #41547]
    697 
    698 - Clean up some memory references in the vendor-class construct.
    699   [ISC-Bugs #42984]
    700 
    701 			Changes since 4.3.4b1
    702 
    703 - None
    704 
    705 			Changes since 4.3.3
    706 
    707 - Corrected a static analyzer warning in common/execute.c
    708   [ISC-Bugs #40374]
    709 
    710 - ISC DHCP now follows the common convention to use the base name a
    711   program is invoked with (aka argv[0], vs. a builtin name) for
    712   logs. This should help differentiate syslog entries for DHCPv4 and
    713   DHCPv6 servers. You can define OLD_LOG_NAME in includes/site.h to
    714   keep the previous behavior.
    715   [ISC-Bugs #38692]
    716 
    717 - The Linux packet filter code now correctly treats only the least significant
    718   12 bits in an inbound packet's TCI value as the VLAN id (per IEEE 802.1Q).
    719   Prior to this it was using the entire 16 bit value as the VLAN id and
    720   incorrectly discarding packets.  Thanks to Jiri Popelka at Red Hat for
    721   reporting this issue and supplying its patch.
    722   [ISC-Bugs #40591]
    723 
    724 - Fixed several static analysis issues such as potential null
    725   references, unchecked strdup returns.  Thanks to Bill Parker (wp02855 at
    726   gmail dot com) who identified these issues and supplied patches to
    727   address them.
    728   [ISC-Bugs #40754]
    729   [ISC-Bugs #40823]
    730 
    731 - Corrected compilation errors that prohibited building the server
    732   and its ATF unit tests when failover is disabled.
    733   [ISC-Bugs #40372]
    734 
    735 - Added the lease address to the end of the debug level log message
    736   emitted when an existing lease is renewed within the dhcp-cache-threshold.
    737   Thanks to Nathan Neulinger at Missouri S&T for suggesting the change.
    738   [ISC-Bugs #40598]
    739 
    740 - Added dhcpv6 and delayed-ack to settings listed in the "Features:"
    741   section of the configure script output.  Additionally, all of the
    742   features reported on will now always show either a "yes" or "no"
    743   value.  Prior to this features left to their default setting would
    744   not show a value.
    745   [ISC-Bugs #40381]
    746 
    747 - Added a parameter, authoring-byte-order, to the lease file. This value
    748   is automatically added to the top of new lease files by the server and
    749   indicates the internal byte order (big endian or little endian) of the
    750   server.  This permits lease files generated on a server with one form of
    751   byte order to be used on a server with the opposite form. Our thanks to
    752   Timothe Litt for calling this to our attention and for the suggestions
    753   he provided.
    754   [ISC-Bugs #38396]
    755 
    756 - Fixed a small memory leak in the DHCPv6 version of the client code.
    757   This is unlikely to cause significant issues in actual use.
    758   [ISC-Bugs #40990]
    759 
    760 - Corrected a few minor memory leaks in omapi's dereferencing of
    761   host objects. Thanks to Jiri Popelka at Red Hat for reporting
    762   the issue and supplying the patches.
    763   [ISC-Bugs #33990]
    764   [ISC-Bugs #41325]
    765 
    766 - Cleaned up some of the Make infrastructure to make --with-libbind
    767   work better.  Though it still only works with an absolute path.
    768   [ISC-Bugs #39210]
    769 
    770 - Made the embedded bind libraries able to be cross compiled
    771   (please refer to the bind9 documentation to learn how to cross
    772    compile DHCP and its bind library dependency).
    773   [ISC-Bugs #38836]
    774 
    775 - Update the client code to better support getting IA_NAs and IA_PDs
    776   in the same packet, see RFC7550 for some discussion.
    777   [ISC-Bugs #40190]
    778 
    779 ! Update the bounds checking when receiving a packet.
    780   Thanks to Sebastian Poehn from Sophos for the bug report and a suggested
    781   patch.
    782   [ISC-Bugs #41267]
    783   CVE: CVE-2015-8605
    784 
    785 - When handling an incorrect command line for dhcpd, dhclient or dhcrelay
    786   print out a specific error message about the first error in addition
    787   to the usage string.  This may be disabled by editing includes/site.h.
    788   [ISC-Bugs #40321]
    789   [ISC-Bugs #41454]
    790 
    791 - The configure script will now exit with an error message if it cannot find
    792   a GNU-style make tool (needed when building BIND libraries) or pkg-config
    793   (needed to locate ATF used for building unit tests). Prior to this the
    794   script would exit indicating success causing subsequent attempts to build
    795   the software to fail.
    796   [ISC-Bugs #40371]
    797 
    798 - Properly terminate strings before passing them to regex and fix
    799   a boundary error when creating certain new data strings.
    800   Thanks to Andrey Jr. Melnikov for the bug report.
    801   [ISC-Bugs #41217]
    802 
    803 - Option expressions, such as prepend and append, are now supported when
    804   running dhclient for IPv6.  Prior to this such statements in the
    805   client configuration file would be parsed but have no affect.  Thanks
    806   to Jiri Popelka at Red Hat for reporting the issue.
    807   [ISC-Bugs #39952]
    808 
    809 - A failover primary server will now accept a binding status update from the
    810   secondary which transitions a lease from ACTIVE to ABANDONED. This accounts
    811   for instances in which a client declines a lease and only the secondary
    812   server receives it.  Prior to this the primary server would reject such an
    813   update as an "invalid state transition".
    814   [ISC_BUGS #25189]
    815 
    816 - Properly allocate memory for a bpf filter.
    817   Thanks to Bill Parker (wp02855 at gmail dot com) who identified this issue.
    818   [ISC-Bugs #41485]
    819 
    820 - Updated contrib/dhcp-lease-list.pl to handle garbage in the oui file better
    821   and to print out the hostnames a bit better.
    822   Thanks to Antoine Beaupr from Debian for the suggested patch.
    823   [ISC-Bugs #41288]
    824 
    825 - The DHCPv6 server now handles long valid and preferred lease times better.
    826   Values that would cause the internal end time of the lease to wrap are
    827   modified to work as infinite.
    828   [ISC-Bugs #40773]
    829 
    830 - Updated support for cross compiling by allowing the library archiver
    831   to be set at configure time via the environment variable 'AR'.
    832   [ISC-Bugs #41536]
    833 
    834 - The server will now match DHCPv6 relayed clients to host declarations
    835   which include the "hardware" statement, if the relay connected to the
    836   client supplies the client's hardware address via client-linklayer-address
    837   option as per RFC 6939.
    838   [ISC-Bugs #40334]
    839 
    840 - Allow a filename to be specified instead of /dev/random during
    841   configuration.  This is passed to the BIND configuration to allow
    842   for cross compilation.
    843   [ISC-Bugs #33835]
    844 
    845 - Add more option definitions.
    846   [ISC-Bugs #40562]
    847 
    848 - Correct outputting of long lines in the lease file when writing
    849   a lease that includes long strings in an execute statement.
    850   [ISC-Bugs #40994]
    851 
    852 - The server will now correctly treat a lease as reserved when the client
    853   requests an infinite lease time (i.e. OxFFFFFFFF) and "infinite-is-reserved"
    854   is enabled.  Prior to this the server would halt.  In addition, corrections
    855   were made to the server to allow a lease's flags field to be set via omapi.
    856   Prior to this, the server, depending on the host architecture,  would
    857   incorrectly parse the new flags value from the omapi message.
    858   [ISC-Bugs #31179]
    859 
    860 - ISC DHCP can now be configured and built from a directory other than
    861   the top level source directory. Note that "make distcheck" uses this
    862   feature.
    863   [ISC-Bugs #39262]
    864 
    865 - Add support for RFC 3527 to dhcrelay.  A new, dhcrelay command line argument,
    866   "-U <interface>" enables the addition of a RFC 3527 compliant link selection
    867   suboption to the agent option added for clients directly connected to the
    868   relay.
    869   [ISC-Bugs #34875]
    870   [ISC-Bugs #41708]
    871 
    872 - Add a new global DHCPv6 option, dhcpv6-set-tee-times, which when enabled
    873   instructs the server to calculate T1 and T2 as recommended in RFC 3315,
    874   Section 22.4.
    875   [ISC-Bugs #25687]
    876 
    877 - Corrected minor Coverity issues.
    878   [ISC-Bugs #35144]
    879 
    880 - Add support for RFC 7341 DHCPv4 over DHCPv6 with a new configuration
    881   option "--enable-dhcpv4o6". Note this feature requires DHCPv6 support
    882   and is not compatible with delayed-ack. Both client and server use 2
    883   processes which communicate over UDP on a pair of sockets. The new
    884   "-4o6 <port>" command line argument enables DHCPv4 over DHCPv6 support
    885   and specifies the consecutive ports to use for inter-process communication.
    886   Please look at doc/DHCPv4-over-DHCPv6 for more details.
    887   [ISC-Bugs #35711]
    888 
    889 - Correct interface name formation when using DLPI under Solaris 11. As of
    890   Solaris 11, ethernet device files are located in "/dev/net".  The configure
    891   script has been modified to detect this situation and adjust the directory
    892   used accordingly. Thanks to Jarkko Torppa for reporting this issue and
    893   submitting a patch
    894   [ISC-Bugs #37954]
    895   [ISC-Bugs #40752]
    896 
    897 - Add a dereference call when handling an error condition while
    898   decoding a packet.
    899   [ISC-Bugs #41774]
    900 
    901 - Add a new parameter, lease-id-format, to both dhcpd and dhclient. The
    902   parameter controls the format in which certain values are written to lease
    903   files.  Formats supported are octal - quoted string containing octal
    904   escapes, and hex - unquoted, colon separated hex digits.  Thanks to
    905   Jay Ford, University of Iowa for bringing the issue to our attention.
    906   [ISC-Bugs #26378]
    907 
    908 ! Add an option in site.h to limit the number of failover and control
    909   connections the server will accept.  By default this is 200.
    910   [ISC-Bugs #41845]
    911   CVE: CVE-2016-2774
    912 
    913 			Changes since 4.3.3b1
    914 
    915 - None
    916 
    917 			Changes since 4.3.2
    918 
    919 - The server now does a better check to see if it can allocate the memory
    920   for large blocks of v4 leases and should provide a slightly better error
    921   message.  Note well: the server pre-allocates v4 addresses, if you use
    922   a large range, such as a /8, the server will attempt to use a large
    923   amount of memory and may not start if there either isn't enough memory
    924   or the size exceeds what the code supports.
    925   [ISC-Bugs #38637]
    926 
    927 - The server will now reject unicast Request, Renew, Decline, and Release
    928   messages from a client unless the server would have sent that client the
    929   dhcp6.unicast option.  This behavior is in compliance with paragraph 1 in
    930   each of the sections 18.2,1, 18.2.3, 18.2.6, and 18.2.7 of RFC 3315. Prior
    931   to this, the server would simply accept the messages.  Now, in order for
    932   the server to accept such a message, the server configuration must include
    933   the dhcp6.unicast option either globally or within the shared network to
    934   which the requested lease belongs. In other words, the server will map
    935   the first IA_XX address found within the client message to a shared-network
    936   and look for the presence of the unicast option there and then globally.
    937   Thanks to Jiri Popelka at Red Hat for this issue and his patch which
    938   inspired the fix.
    939   [ISC-Bugs #21235]
    940 
    941 - The ATF (Automated Testing Framework) tools used for optional unit tests
    942   can now be built from its embedded sources in bind, solving the
    943   atf-run / atf-report issue with recent (>= 0.20) versions of ATF.
    944   The new configuration option is "./configure --with-atf=bind".
    945   [ISC-Bugs #38754, #39300]
    946 
    947 - Corrected a compilation error introduced by the fix for ISC-Bugs #22806.
    948   On older linuxes that do not include the tpacket_auxdata structure don't
    949   bother allocating the cmsgbuf as it isn't necessary and we don't have
    950   a proper length for it.
    951   [ISC-Bugs #39209]
    952 
    953 - Remove the dst directory.  This was replaced in 4.2.0 with the dst
    954   code from the Bind libraries but we continued to include it for
    955   backwards compatibility.  As we have now released 4.3.x it seems
    956   reasonable to remove it.
    957   [ISC-Buts #39019]
    958 
    959 - Write out the DUID server id on startup in all cases, previously if it
    960   was read in from server-duid option in the config or lease files for
    961   DHCPv4 it would not be written to the new lease file.
    962   [ISC-Bugs #37791]
    963 
    964 - When parsing dates for leases convert dates past 2038 to "never".
    965   This avoids problems with integer overflows in the date and time
    966   handling code for people that decide to use very large lease times
    967   or add a lease entry with a date far in the future.
    968   [ISC-Bugs #33056]
    969 
    970 - Leave the siaddr field clear when sending a NACK as per RFC 2131
    971   table 3.
    972   [ISC-Bugs #38769]
    973 
    974 - In the client don't send expired addresses to the script as part of
    975   the binding process.  Thanks to Sven Trenkel at Google for reporting
    976   the issue and suggesting the patch.
    977   [ISC-Bugs #38631]
    978 
    979 - While parsing IPv6 addresses treat "add" as part of the address instead
    980   of as a token.
    981   [ISC-Bugs #39529]
    982 
    983 - Add support for accessing the v4 lease queues (active, free etc) in a
    984   binary fashion instead of needing to walk through a linear list to
    985   insert, find or remove an entry from the queues.  In addition add a
    986   compile time option "--enable-binary-leases" to enable the new code
    987   or to continue using the old code.  The old code is the default.
    988   Thanks to Fernando Soto from BlueCat Networks for the patch.
    989   [ISC-Bugs #39078]
    990 
    991 - Delayed-ack now works properly with Failover. Prior to this, bind updates
    992   post startup were being queued but never delivered. Among other things, this
    993   was causing leases to not transition from expired or released to free.
    994   [ISC-Bugs #31474]
    995 
    996 - Clean up parsing of v6 lease files a bit to avoid infinite loops if the
    997   lease file is corrupt in certain ways.
    998   [ISC-Bugs #39760]
    999 
   1000 - Corrected a crash in dhclient that occurs during lease renewal if the
   1001   client is performing its own DNS updates.  Thanks to Jiri Popelka at Red Hat
   1002   for the bug report.
   1003   [ISC-Bugs #38639]
   1004 
   1005 - Corrected an issue in v6 lease file parsing. Prior to this, when encountering
   1006   a lease with an address for which no configured pool exists, the server was
   1007   declaring the lease file corrupt and incorrectly skipping over the subsequent
   1008   entry in the file.  The server will now emit a log message indicating that
   1009   no pool was found for the address (or prefix) and correctly resume parsing
   1010   with the next entry in the lease file.  Our thanks to Michal ejdl for
   1011   reporting the issue.
   1012   [ISC-Bugs #39314]
   1013 
   1014 - Be more liberal in finding a subnet group associated with a static
   1015   prefix.  When we added the class matching code for v6 we also added
   1016   a requirement that the static prefix must be within a subnet the
   1017   client was in, in order to find the proper statements.  We now
   1018   look for a subnet based on the prefix, failing that on the static
   1019   address for the client and failing that on the shared network
   1020   itself.
   1021   [ISC-Bugs #38329]
   1022 
   1023 - Add a new action expression "parse_vendor_options", which can be used
   1024   to parse a vendor-encapsualted-option received by the server based on
   1025   the encoding specified by the vendor-option-space statement.
   1026   [ISC-Bugs #36449]
   1027 
   1028 - Enhance the PARANOIA patch to include fchown() the lease file to
   1029   allow it to be manipulated after the server does a chown().
   1030   Thanks to Jiri Popelka at Red Hat for the patch.
   1031   [ISC-Bugs #36978]
   1032 
   1033 - Relax the requirement that prefix pools must be within the subnet.
   1034   This was added in as part of #32453 in order to avoid configuration
   1035   mistakes but is being removed as prefixes aren't required to be
   1036   within the same subnet and many people configure them in that fashion.
   1037   [ISC-Bugs #40077]
   1038 
   1039 - Fixed a server crash that could occur when the server attempts to remove
   1040   the billing class from the last lease billed to a dynamic class after said
   1041   class has been deleted.  Our thanks to Lasse Pesonen for reporting the
   1042   issue.
   1043   [ISC-Bugs #39978]
   1044 
   1045 - LDAP Patches - Numerous small patches submitted by contributors have
   1046   been applied to the contributed code which supplies LDAP support.
   1047   In addition, two larger submissions have also been included.  The
   1048   first adds support for IPv6 configuration and the second provides
   1049   GSSAPI authentication. We would like to thank the following for their
   1050   contributions (alphabetically):
   1051     Alex Novak at SUSE
   1052     Bill Parker (wp02855 at gmail dot com)
   1053     Jiri Popelka at Red Hat
   1054     Marius Tomaschewski at SUSE
   1055     (william at adelaide.edu.au), The University of Adelaide
   1056   [ISC-Bugs #39056]
   1057   [ISC-Bugs #22742]
   1058   [ISC-Bugs #24449]
   1059   [ISC-Bugs #28545]
   1060   [ISC-Bugs #29873]
   1061   [ISC-Bugs #30183]
   1062   [ISC-Bugs #30402]
   1063   [ISC-Bugs #32217]
   1064   [ISC-Bugs #32240]
   1065   [ISC-Bugs #33176]
   1066   [ISC-Bugs #33178]
   1067   [ISC-Bugs #36409]
   1068   [ISC-Bugs #36774]
   1069   [ISC-Bugs #37876]
   1070 
   1071 - Handle an out of memory condition in the client a bit better.
   1072   Thanks to Frdric Perrin from Brocade for finding the issue
   1073   and suggesting a patch.
   1074   [ISC-Bugs #39279]
   1075 
   1076 			Changes since 4.3.2rc2
   1077 - None
   1078 
   1079 			Changes since 4.3.2rc1
   1080 
   1081 - Corrected a compilation error introduced by the fix for ISC-Bugs #37415.
   1082   The error occurs on Linux variants that do not support VLAN tag information
   1083   in packet auxiliary data.  The configure script now only enables inclusion
   1084   of the VLAN tag-based logic if it is supported by the underlying OS.
   1085   [ISC-Bugs #38677]
   1086 
   1087 			Changes since 4.3.2b1
   1088 
   1089 - Specifying the option, --disable-debug, on the configure script command line
   1090   now disables debug features.  Prior to this, specifying --disable-debug
   1091   incorrectly enabled debug features. Thanks to Gustavo Zacarias for reporting
   1092   the issue.
   1093   [ISC-Bugs #37780]
   1094 
   1095 - Unit test execution now uses a path augmented during configuration
   1096   processing of the --with-atf option to locate ATF runtime tools, atf-run
   1097   and atf-report. For most installations of ATF, this should alleviate the
   1098   need to manually include them in the PATH, as was formerly required.
   1099   If the configure script cannot locate the tools it will emit a warning,
   1100   informing the user that the tools must be in the PATH when running unit
   1101   tests.
   1102   Secondly, please note that "make check" will now exit with a failure status
   1103   code (non-zero) if one or more unit tests fail.  This means that invoking
   1104   "make check" from an upper level directory will cause the make process to
   1105   STOP after the first test subdirectory with failed test(s).  To force all
   1106   tests in all subdirectories to run, regardless of individual test outcome,
   1107   use the command "make -k check".
   1108   [ISC-Bugs #38619]
   1109 
   1110 			Changes since 4.3.1
   1111 
   1112 - Corrected parser's right brace matching when a statement contains an error.
   1113   [ISC-Bugs #36021]
   1114 
   1115 - TSIG-authenticated dynamic DNS updates now support the use of these
   1116   additional algorithms: hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384,
   1117   and hmac-sha512
   1118   [ISC-Bugs #36947]
   1119 
   1120 - Added check for invalid failover message type. Thanks to Tobias Stoeckmann
   1121   working with the OpenBSD project who spotted the issue and provided the
   1122   patch.
   1123   [ISC-Bugs #36653]
   1124 
   1125 - Corrected rate limiting checks for bad packet logging.  Thanks to Tobias
   1126   Stoeckmann working with the OpenBSD project who spotted the issue and
   1127   provided the patch.
   1128   [ISC-Bugs #36897]
   1129 
   1130 - Log statements depicting what files will be used by the server now occur
   1131   after the configuration file has been processed.
   1132   [ISC-Bugs #36671]
   1133 
   1134 - Addressed Coverity issues reported as of 07-31-2014:
   1135   [ISC-Bugs #36712] Corrects Coverity reported "high" impact issues.
   1136   [ISC-Bugs #36933] Corrects Coverity reported "medium" impact issues
   1137   [ISC-Bugs #37708] Fixes compilation error in dst_api.c seen in older
   1138   compilers that was introduced by #36712
   1139 
   1140 - Server now supports a failover split value of 256.
   1141   [ISC-Bugs] #36664]
   1142 
   1143 - Remove unneeded error #defines.  These defines were included in case
   1144   external programs required the older versions of the macro.  They
   1145   have been #ifdeffed for now and will be removed at a future date.
   1146   See site.h for the #define to include them again, but you should
   1147   switch to using the DHCP_R_* versions instead of the ISC_R_* versions.
   1148   Also ISC_R_MULTIPLE has been removed as it is also defined in bind.
   1149   [ISC-Bugs #37128]
   1150 
   1151 - Added checks in range6 and prefix6 statement parsing to ensure addresses
   1152   are within the declared subnet. Thanks to Jiri Popelka at Red Hat for the
   1153   bug report and patch.
   1154   [ISC-Bugs #32453]
   1155   [ISC-Bugs #17766]
   1156   [ISC-Bugs #18510]
   1157   [ISC-Bugs #23698]
   1158   [ISC-Bugs #28883]
   1159 
   1160 - Addressed checksum issues:
   1161   Added checksum readiness check to Linux packet filtering which eliminates
   1162   invalid packet drops due to checksum errors when checksum offloading is
   1163   in use.  Based on dhcp-4.2.2-xen-checksum.patch made to the Fedora project.
   1164   [ISC-Bugs #22806]
   1165   [ISC-Bugs #15902]
   1166   [ISC-Bugs #17739]
   1167   [ISC-Bugs #18010]
   1168   [ISC-Bugs #22556]
   1169   [ISC-Bugs #29769]
   1170   Inbound packets with UDP checksums of 0xffff now validate correctly rather
   1171   than being dropped.
   1172   [ISC-Bugs #24216]
   1173   [ISC-Bugs #25587]
   1174 
   1175 - Added the echo-client-id configuration parameter to the server configuration.
   1176   The server now supports RFC 6842 compliant behavior by setting a new
   1177   configuration parameter, echo-client-id.  When enabled, the server will
   1178   include the client identifier option (Option code 61) if received, in its
   1179   responses.  The server identifier returned in NAKs (if enabled) will now
   1180   be the globally defined value (if one) if the server cannot attribute the
   1181   inbound request to a known subnet.
   1182   [ISC-Bugs #35958]
   1183   [ISC-Bugs #32545]
   1184 
   1185 - Added support of the configuration parameter, use-host-decl-names, to
   1186   BOOTP request handling.
   1187   [ISC-Bugs #36233]
   1188 
   1189 - Added logic to ignore the signal, SIGPIPE, which ensures write failures
   1190   will be delivered as errors rather than as SIGPIPE signals on all OSs.
   1191   Thanks to Marius Tomaschewski from SUSE who reported the issue and provided
   1192   the patch upon which the fix is based.
   1193   [ISC-Bugs #32222]
   1194 
   1195 - In the failover code, handle the case of communications being interrupted
   1196   when the servers are dealing with POTENTIAL-CONFLICT.  This patch allows
   1197   the primary to accept the secondary moving from POTENTIAL-CONFLICT to
   1198   RESOLUTION-INTERRUPTED as well as handling the bind update process better.
   1199   In addition the code to resend update or update all requests has been
   1200   modified to send requests more often.
   1201   [ISC-Bugs #36810]
   1202   [ISC-Bugs #20352]
   1203 
   1204 - By default, the server will now choose the value to use in the forward DNS
   1205   name from the following in order of preference:
   1206 
   1207     1. FQDN option if provided by the client
   1208     2. Host name option if provided by the client
   1209     3. Configured option host-name if defined
   1210 
   1211   As before, this may be overridden by defining ddns-hostname to the desired
   1212   value (or expression).  In addition, the server logic has been extended to
   1213   use the value of the host name declaration if use-host-decl-names is enabled
   1214   and no other value is available.
   1215   [ISC-Bugs #21323]
   1216 
   1217 - DNS updates were being attempted when dhcp-cache-threshold enabled the use of
   1218   the existing lease and the forward DNS name had not changed.  This has been
   1219   corrected.
   1220   [ISC-Bugs #37368]
   1221   [ISC-Bugs #38636]
   1222 
   1223 - Corrected an issue which caused dhclient to incorrectly form the result when
   1224   prepending or appending to the IPv4 domain-search option, received from the
   1225   server, when either of the values being combined contain compressed
   1226   components.
   1227   [ISC-Bugs #20558]
   1228 
   1229 - Added the server-id-check parameter to the server configuration.
   1230   This parameter allows run-time control over whether or not a server,
   1231   participating in failover, verifies the dhcp-server-identifier option in
   1232   DHCP REQUESTs against the server's id before processing the request.
   1233   Formerly, enabling this behavior was done at compilation time through
   1234   the use of the #define, SERVER_ID_CHECK, which has been removed from site.h
   1235   The functionality is now only available through the new runtime parameter.
   1236   [ISC-Bugs #37551]
   1237 
   1238 - During startup, when the server encounters a lease whose binding state is
   1239   FTS_BACKUP but whose pool has no configured failover peer, it will reset the
   1240   lease's binding state to FTS_FREE.  This allows the leases to be reclaimed
   1241   by the server after a pool's configuration has changed from failover to
   1242   standalone. Prior to this such leases would remain stuck in the backup state
   1243   making them unavailable for assignment.  Note this conversion will occur
   1244   whether or not the server is compiled for failover.
   1245   [ISC-Bugs #36960]
   1246 
   1247 - Fixed a small issue in the treatment of hosts in the inform processing
   1248   that could cause the response to an inform to include information from
   1249   the wrong scope.  The two examples we've heard of are getting subnet
   1250   instead of group information associated with a host entry, or getting
   1251   global information instead of subnet if the host entry was built via
   1252   omapi.  Thanks to Julien Soula at University of Lille for finding the
   1253   bug and supplying a patch.
   1254   [ISC-Bugs #35712]
   1255 
   1256 - Avoid calling pool_timer() recursively from supersede_lease().  This could
   1257   result in leases changing state incorrectly or delaying the running of the
   1258   leae expiration code.
   1259   [ISC-Bugs #38002]
   1260 
   1261 - Move the check for a PID file and process to be before we rewrite the
   1262   lease file.  This avoids the possibility of starting a second instance
   1263   of a server which changes the current lease file confusing the first
   1264   instance.  This check is only included if the admin hasn't disabled PID
   1265   files.
   1266   [ISC-Bugs #38078]
   1267   [ISC-Bugs #38143]
   1268 
   1269 - In the client code change the way preferred_life and max_life are printed
   1270   for environment variables to be unsigned rather than signed.
   1271   Thanks to Jiri Popelka at Red Hat for the bug report and patch.
   1272   [ISC-Bugs #37084]
   1273 
   1274 - Modified Linux packet handling such that packets received via VLAN are now
   1275   seen only by the VLAN interface. Prior to this, such packets were seen by
   1276   both the VLAN interface and its parent (physical) interface, causing the
   1277   server to respond to both.  Note this remains an issue for non-Linux OSs.
   1278   Thanks to Jiri Popelka at Red Hat for the patch.
   1279   [ISC-Bugs #37415]
   1280   [ISC-Bugs #37133]
   1281   [ISC-Bugs #36668]
   1282   [ISC-Bugs #36652]
   1283 
   1284 - Log content has been changed to more directly suggest that admins should
   1285   check for multiple IPv6 clients attempting to use the same DUID when only
   1286   abandoned addresses are available.  Debug level logging will now emit counts
   1287   of the total number of, in-use, and abandoned addresses in a shared subnet
   1288   when the server finds no addresses available for a given DUID.  Lastly,
   1289   threshold logging is now automatically disabled for shared subnets whose
   1290   total number of possible addresses exceeds (2^64)-1.
   1291   [ISC-Bugs #26376]
   1292   [ISC-Bugs #38131]
   1293 
   1294 - Added a global parameter, prefix-length-mode, which may be used to determine
   1295   how the server uses a non-zero value for prefix-length supplied by clients
   1296   when soliciting DHCPv6 prefixes.  The server supports selection modes of:
   1297   ignore, prefer, exact, minimum and maximum which are described in detail in
   1298   the server man pages.  The prior behavior of the server was to only offer a
   1299   prefix whose length exactly matched the prefix-length value requested. If
   1300   no such prefixes were available, the server returned a status of none
   1301   available.  Note the default mode, "exact", provides this same behavior.
   1302   [ISC-Bugs #36780]
   1303   [ISC-Bugs #32228]
   1304 
   1305 - Corrected inconsistencies in dhcrelay's setting the upper interface hop count
   1306   limit such that it now sets it to 32 when the upstream address is a multicast
   1307   address per RFC 3315 Section 20. Prior to this if the -u argument preceded
   1308   the -l argument on the command line or if the same interface was specified
   1309   for both; the logic to set the hop limit count for the upper interface was
   1310   skipped.  This caused the hop count limit to be set to the default value
   1311   (typically 1) in the outbound upstream packets.
   1312   [ISC-Bugs #37426]
   1313 
   1314 			Changes since 4.3.1b1
   1315 
   1316 - Modify the linux and openwrt dhclient scripts to process information
   1317   from a stateless request.  Thanks to Jiri Popelka at Red Hat for the
   1318   bug report and patch.
   1319   [ISC-Bugs #36102]
   1320 
   1321 - Remove more unused RCSID tags.  These weren't noticed in 4.3 as
   1322   the code isn't used anymore but we remove them here to keep the
   1323   code consistent across versions.
   1324   [ISC-Bugs #36451]
   1325 
   1326 			Changes since 4.3.0
   1327 
   1328 - Tidy up several small tickets.
   1329   Correct parsing of DUID from config file, previously the LL type
   1330   was put in the wrong place in the DUID string.
   1331   [ISC-Bugs #20962]
   1332   Add code to parse "do-forward-updates" as well as "do-forward-update"
   1333   Thanks to Jiri Popelka at Red Hat.
   1334   [ISC-Bugs #31328]
   1335   Remove log_priority as it isn't currently used.
   1336   [ISC-Bugs #33397]
   1337   Increase the size of the buffer used for reading interface information.
   1338   [ISC-Bugs #34858]
   1339 
   1340 - Remove an extra set of the msg_controllen variable.
   1341   [ISC-Bugs #21035]
   1342 
   1343 - Add a more understandable error message if a configuration attempts
   1344   to add multiple keys for a single zone.  Thanks to a patch from Jiri
   1345   Popelka at Red Hat.
   1346   [ISC-Bugs #31892]
   1347 
   1348 - Fix some minor issues in the dst code.
   1349   [ISC-Bugs #34172]
   1350 
   1351 - Properly #ifdef functions so that the code can compile without NSUPDATE.
   1352   [ISC-Bugs #35058]
   1353 
   1354 - Update the partner's stos (start time of state, basically when we last
   1355   heard from this partner) field when updating the state in failover.
   1356   [ISC-Bugs #35549]
   1357 
   1358 - Modify the overload processing to allow space for the remote agent ID.
   1359   [ISC-Bugs #35569]
   1360   Handle the ordering of the SUBNET_MASK option even if it is the last
   1361   option in the list.
   1362   [ISC-Bugs #24580]
   1363 
   1364 - Remove the code that allows a server to follow RFC3315 instead of
   1365   the subsequent errata from August 2010 when determining which IAs
   1366   to include if no addresses will be assigned.
   1367   [ISC-Bugs #28938]
   1368 
   1369 - Remove unused RCSID tags.
   1370   [ISC-Bugs #35846]
   1371 
   1372 - Correct the v6 client timing code.  When doing the timing backoff
   1373   for MRT limit it to MRD.
   1374   Thanks to Jiri Popelka at Red Hat for the bug report and fix.
   1375   [ISC-Bugs #21238
   1376 
   1377 - Add a log entry when killing a client and remove the PID files
   1378   when a server, relay or client are killed.
   1379   [ISC-Bugs #16970]
   1380   [ISC-Bugs #17258]
   1381 
   1382 - Some minor cleanups in the client code.
   1383   In addition to checking for dhcpc check for bootpc in the services list.
   1384   [ISC-Bugs #18933]
   1385   Correct the client code to only try to get a lease once when the
   1386   given the "-1" argument.
   1387   Thanks to Jiri Popelka at Red Hat for the bug report and fix.
   1388   [ISC-Bugs #26735]
   1389   When asked for the version don't send the output to syslog.
   1390   [ISC-Bugs #29772]
   1391   Add the next server information to the environment variables for
   1392   use by the client script.  In order to avoid changing the client
   1393   lease file the next server information isn't written to it.
   1394   Thanks to Tomas Hozza at Red Hat for the suggestion and a prototype fix.
   1395   [ISC-Bugs #33098]
   1396 
   1397 - Several updates to the dhcp server code.
   1398   When not in quiet mode print out the files being used.
   1399   [ISC-Bugs #17551]
   1400   As accessing some pid files may require privileges move the dropping
   1401   of permission bits due to the paranoia patch to be after the pid code.
   1402   Thanks to Jiri Popelka at Red Hat for the bug report and fix.
   1403   [ISC-Bugs #25806]
   1404   When processing a "--version" request don't output the version information
   1405   to syslog.
   1406 
   1407 - Add the "enable-log-pid" build option to the configure script.  When enabled
   1408   this causes the client, server and relay programs to include the PID
   1409   number in syslog messages.
   1410   Thanks to Marius Tomaschewski for the suggestion and proto-patch.
   1411   [ISC-Bugs #29713]
   1412 
   1413 - Add a #define to specify the prefix length used when a client attempts
   1414   to configure an address.  This can be modified by editing includes/site.h.
   1415   By default it is set to 64.  While 128 might be a better choice it would
   1416   also be a change for currently running systems, so we have left it at 64.
   1417   [ISC-Bugs #DHCP-2]
   1418 
   1419 - Add a run time option to the client "-df" to allow the administrator to
   1420   point to a second lease file the client can search for a DUID.  This can
   1421   be used to allow a v4 and a v6 instance of the client to share a DUID.
   1422   The second file will only be searched if there isn't a DUID in the main
   1423   lease file and the DUID will be written out to the main lease file.
   1424   [ISC-Bugs #34886]
   1425 
   1426 - Have the client fsync the lease file to avoid lease corruption if the
   1427   client hibernates or otherwise shuts down.
   1428   [ISC-Bugs #35894]
   1429 
   1430 - Add a check for L2VLAN in bpf.c to help support VLAN interfaces
   1431   Thanks to Steinar Haug for the suggestion.
   1432   [ISC-Bugs #36033]
   1433 
   1434 - Modify the handling of the resolv.conf file to allow the DHCP
   1435   process to start up even if the resolv.conf file has problems.
   1436   [ISC-Bugs #35989]
   1437 
   1438 - Add threshold logging functionality.  Two new options,
   1439   log-threshold-low and log-threshold-high, indicate to the
   1440   server if and when it should log an error message as addresses
   1441   in a pool are used.
   1442   [ISC-Bugs #34487]
   1443 
   1444 - Add code to properly dereference a pointer in the dhclient code
   1445   on an error condition.
   1446   [ISC-Bugs #36194]
   1447 
   1448 - Add code to help clean up soft leases.
   1449   [ISC-Bugs #36304]
   1450 
   1451 - Disable the gentle shutdown functionality until we can determine
   1452   the best way to present it to remove or reduce the side effects.
   1453   [ISC-Bugs #36066]
   1454 
   1455 			Changes since 4.3.0rc1
   1456 
   1457 - None
   1458 			Changes since 4.3.0b1
   1459 
   1460 - Tidy up receive packet processing.
   1461   Thanks to Brad Plank of GTA for reporting the issue and suggesting
   1462   a possible patch.
   1463   [ISC-Bugs #34447]
   1464 
   1465 			Changes since 4.3.0a1
   1466 
   1467 - Modify the message displayed when a process hits a fatal error.
   1468   The new message is much shorter and simply points to the README
   1469   and our website for directions on bug submissions.
   1470   [ISC-Bugs #24789]
   1471 
   1472 			Changes since 4.2.0 (new features)
   1473 
   1474 - If a client renews before 'dhcp-cache-threshold' percent of its lease
   1475   has elapsed (default 25%), the server will reuse the allocated lease
   1476   (provide a lease within the currently allocated lease-time) rather
   1477   than extend or renew the lease.  This absolves the server of needing
   1478   to perform an fsync() operation on the lease database before reply,
   1479   which improves performance. [ISC-Bugs #22228]
   1480   Updated this patch to support asynchronous DDNS.  If the server is
   1481   attempting to do DDNS on a lease it should be updated and written to
   1482   disk even if that wouldn't be necessary due to the thresholding.
   1483   [ISC-Bugs #26311]
   1484 
   1485 - The 'no available billing' log line now also logs the name of the last
   1486   matching billing class tried before failing to provide a billing.
   1487   [ISC-Bugs #21759]
   1488 
   1489 - A problem with missing get_hw_addr function when --enable-use-sockets
   1490   was used is now solved on GNU/Linux, BSD and GNU/Hurd systems. Note
   1491   that use-sockets feature was not tested on those systems. Client and
   1492   server code no longer use MAX_PATH constant that is not defined on
   1493   GNU/Hurd systems. [ISC-Bugs #25979]
   1494 
   1495 - Add a perl script in the contrib directory, dhcp-lease-list.pl, which
   1496   can parse v4 lease files and output the lease information in a more
   1497   human friendly manner.  This was written by Christian Hammers with
   1498   some updates by vom and ISC.  This is contributed code and is not
   1499   supported by ISC; however it may be useful to some users.
   1500   [ISC-Bugs #20680]
   1501 
   1502 - Add support in v6 for on-commit, on-expire and on-release.
   1503   [ISC-Bugs #27912]
   1504 
   1505 - Add support for using classes with v6.
   1506   [ISC-Bugs #26510]
   1507 
   1508 - Update the DDNS code to current standards and allow for sharing
   1509   of DDNS entries between v4 and v6 clients.  The new code is used
   1510   if the ddns-update-style is set to "standard", the older code is
   1511   still available if ddns-update-style is set to "interim".  The
   1512   oldest DDNS code "ad-hoc" has been removed.  Thanks to Thomas Pegeot
   1513   who submitted a patch for this issue.  This patch is based on
   1514   that work with some modifications.
   1515   [ISC-Bugs #21139]
   1516 
   1517 - Add a configuration option to the server to suppress using fsync().
   1518   Enabling this option will mean that fsync() is never called.  This
   1519   may provide better performance but there is also a risk that a lease
   1520   will not be properly written to the disk after it has been issued
   1521   to a client and before the server stops.  Using this option is
   1522   not recommended.
   1523   [ISC-Bugs #34810]
   1524 
   1525 - Add some logging statements to indicate when the server is ready
   1526   to serve.  One statement is emitted after the server has finished
   1527   reading its files and is about to enter the dispatch loop.
   1528   This is "Server starting service.".
   1529   The second is emitted when a server determines that both it and
   1530   its failover peer are in the normal state.
   1531   This is "failover peer <name>: Both servers normal."
   1532   [ISC-Bugs #33208]
   1533 
   1534 - Add support for accessing options from v6 relays.  The v6relay
   1535   statement allows the administrator to choose which relay to
   1536   use when searching for an option, see the dhcp-options man page
   1537   for a description.  The host-identifier option has also been
   1538   updated to support the use of relay options, see the dhcpd.conf
   1539   man page for a description.
   1540   [ISC-Bugs #19598]
   1541 
   1542 - When doing DDNS if there isn't an appropriate zone statement attempt
   1543   to find a reasonable nameserver via a DNS resolver.  This restores
   1544   some functionality that was lost in the transition to asynchronous
   1545   DDNS.  Due to the lack of security and increase in fragility of the
   1546   system when using this feature we strongly recommend the use of
   1547   appropriate zone statements rather than using this functionality.
   1548   [ISC-Bugs #30461]
   1549 
   1550 - Add support for specifying the address from which to send
   1551   DDNS updates on the DHCP server.  There are two new options
   1552   "ddns-local-address4" and "ddns-local-address6" that each take
   1553   one instance of their respective address types.
   1554   [ISC-Bugs #34779]
   1555 
   1556 - Add ignore-client-uids option in the server.  This option causes
   1557   the server to not record a client's uid in its lease.  This
   1558   violates the specification but may also be useful when a client
   1559   can dual boot using different client ids but the same mac address.
   1560   Thank you to Brian De Wolf at Cal Poly Pomona for the patch.
   1561   [ISC-Bugs #32427]
   1562   [ISC-Bugs #35066]
   1563 
   1564 - Extend the DHCPINFORM processing to honor the subnet selection option
   1565   and take host declarations into account.
   1566   Thanks to Christof Chen for testing and submitting the patch.
   1567   [ISC-Bugs #35015]
   1568 
   1569 - Extend the hardware expression to look into the lease structure
   1570   for a hardware address if there is no packet.  This allows the
   1571   server to find the hardware address during on-expiry processing.
   1572   [ISC-Bugs #24584]
   1573 
   1574 - Add definitions for some options that have been specified by the IETF.
   1575   [ISC-Bugs #29268]
   1576   [ISC-Bugs #35198]
   1577 
   1578 			Changes since 4.2.0 (bug fixes)
   1579 
   1580 - When using 'ignore client-updates;', the FQDN returned to the client
   1581   is no longer truncated to one octet.
   1582 
   1583 - Cleaned up an unused hardware address variable in nak_lease().
   1584 
   1585 - Manpage entries for the ia-pd and ia-prefix options were updated to
   1586   reflect support for prefix delegation.
   1587 
   1588 - Cleaned up some compiler warnings
   1589 
   1590 - An optimization described in the failover protocol draft is now included,
   1591   which permits a DHCP server operating in communications-interrupted state
   1592   to 'rewind' a lease to the state most recently transmitted to its peer,
   1593   greatly increasing a server's endurance in communications-interrupted.
   1594   This is supported using a new 'rewind state' record on the dhcpd.leases
   1595   entry for each lease.
   1596 
   1597 - Fix the trace code which was broken by the changes to the DDNS code.
   1598 
   1599 - Update the fsync code to work with the changes to the DDNS code.  It now
   1600   uses a timer instead of noticing if there are no more packets to process.
   1601 
   1602 - When constructing the DNS name structure from a text string append
   1603   the root to relative names.  This satisfies a requirement in the DNS
   1604   library that names be absolute instead of relative and prevents DHCP
   1605   from crashing.  [ISC-Bugs #21054]
   1606 
   1607 - "The LDAP Patch" that has been circulating for some time, written by
   1608   Brian Masney and S.Kalyanasundraram and maintained for application to
   1609   the DHCP-4 sources by David Cantrell has been included.  Please be
   1610   advised that these sources were contributed, and do not yet meet the
   1611   high standards we place on production sources we include by default.
   1612   As a result, the LDAP features are only included by using a compile-time
   1613   option which defaults off, and if you enable it you do so under your
   1614   own recognizance.  We will be improving this software over time.
   1615   [ISC-Bugs #17741]
   1616 
   1617 - Prohibit including lease time information in a response to a DHCP INFORM.
   1618   [ISC-Bugs #21092]
   1619 
   1620 ! Accept a client id of length 0 while hashing.  Previously the server would
   1621   exit if it attempted to hash a zero length client id, providing attackers
   1622   with a simple denial of service attack.  [ISC-Bugs #21253]
   1623   CERT: VU#541921 - CVE: CVE-2010-2156
   1624 
   1625 - A memory leak in ddns processing was closed.  [ISC-Bugs #21377]
   1626 
   1627 - Modify the exception handling for initial context creation.  Previously
   1628   we would try and clean up before exiting.  This could present problems
   1629   when the cleanup required part of the context that wasn't available.  It
   1630   also didn't do much as we exited afterwards anyway.   Now we simply log
   1631   the error and exit. [ISC-Bugs #21093]
   1632 
   1633 - A bug was fixed that could cause the DHCPv6 server to advertise/assign a
   1634   previously allocated (active) lease to a client that has changed subnets,
   1635   despite being on different shared networks.  Dynamic prefixes specifically
   1636   allocated in shared networks also now are not offered if the client has
   1637   moved.  [ISC-Bugs #21152]
   1638 
   1639 - Add some debugging output for use with the DDNS code. [ISC-Bugs #20916]
   1640 
   1641 - Fix the trace code to handle timing events better and to truncate a file
   1642   before using instead of overwriting it.  [ISC-Bugs #20969]
   1643 
   1644 - Modify the determination of the default TTL to use for DDNS updates.
   1645   The user may still configure the ttl via ddns-ttl.  The default for
   1646   both v4 and v6 is now 1/2 the (preferred) lease time with a limit.  The
   1647   previous defaults (1/2 lease time without a limit for v4 and a default
   1648   value for v6) may be used by defining USE_OLD_DDNS_TTL in site.h
   1649   [ISC-Bugs #21126]
   1650 
   1651 - libisc/libdns is now brought up to version 9.7.1rc1.  This corrects
   1652   three reported flaws in ISC DHCP;
   1653 
   1654   o DHCP processes (dhcpd, dhclient) fail to start if one of either the
   1655     IPv4 or IPv6 address families is not present.  [ISC-Bugs #21122]
   1656 
   1657   o Assertion failure when attempting to cancel a previously running DDNS
   1658     update.  [ISC-Bugs #21133]
   1659 
   1660   o Compilation failure of libisc/libdns due to the use of a flexible
   1661     array member.  [ISC-Bugs #21316]
   1662 
   1663 - Add declaration for variable in debug code in alloc.c.  [ISC-Bugs #21472]
   1664 
   1665 - Documentation cleanup covering multiple tickets
   1666   [ISC-Bugs #20265] [ISC-Bugs #20259] minor cleanup
   1667   [ISC-Bugs #20263] add text describing some default values
   1668   [ISC-Bugs #20193] single quotes at the start of a line indicate a control
   1669   line to nroff, escape them if we actually want a quote.
   1670   [ISC-Bugs #18916] sync the pointer to web pages amongst the different docs
   1671 
   1672 - 'get-host-names true;' now also works even if 'use-host-decl-names true;'
   1673   was also configured.  The nature of this repair also fixes another
   1674   error; the host-name supplied by a client is no longer overridden by a
   1675   reverse lookup of the lease address.  Thanks to a patch from Wilco Baan
   1676   Hofman supplied to us by the Debian package maintenance team.
   1677   [ISC-Bugs #21691] {Debian Bug#509445}
   1678 
   1679 - The .TH tag for the dhcp-options manpage was typo repaired
   1680   thanks to a report from jidanni and the Debian package maintenance
   1681   team.  [ISC-Bugs #21676] {Debian Bug#563613}
   1682 
   1683 - More documentation changes - primarily to put the options in the dhclient
   1684   and dhcpd man pages into the standard form.  Thanks in part to a patch
   1685   from David Cantrell at Red Hat.
   1686   [ISC-Bugs #20264] and parts of [ISC-Bugs #17744] dhclient.8 changes
   1687 
   1688 - Add code to clear the pointer to an object in an OMAPI handle when the
   1689   object is freed due to a dereference.  [ISC-Bugs #21306]
   1690 
   1691 - Fixed a bug that leaks host record references onto lease structures,
   1692   causing the server to apply configuration intended for one host to any
   1693   other innocent clients that come along later.  [ISC-Bugs #22018]
   1694 
   1695 - Minor code fixes
   1696   [ISC-Bugs #19566] When trying to find the zone for a name for ddns allow
   1697   the name to be at the apex of the zone.
   1698   [ISC-Bugs #19617] Restrict length of interface name read from command line
   1699   in dhcpd - based on a patch from David Cantrell at Red Hat.
   1700   [ISC-Bugs #20039] Correct some error messages in dhcpd.c
   1701   [ISC-Bugs #20070] Better range check on values when creating a DHCID.
   1702   [ISC-Bugs #20198] Avoid writing past the end of the field when adding
   1703   overly long file or server names to a packet and add a log message
   1704   if the configuration supplied overly long names for these fields.
   1705   Thanks to Martin Pala.
   1706   [ISC-Bugs #21497] Add a little more randomness to rng seed in client
   1707   thanks to a patch from Jeremiah Jinno.
   1708 
   1709 - Correct error handling in DLPI [ISC-Bugs #20378]
   1710 
   1711 - Remove __sun__ and __hpux__ typedefs in osdep.h as they are now being
   1712   checked in configure.  [ISC-Bugs #20443]
   1713 
   1714 - Modify how the cmsg header is allocated the v6 send and received routines
   1715   to compile on more compilers.  [ISC-Bugs #20524]
   1716 
   1717 - When parsing a domain name free the memory for the name after we are
   1718   done with it.  [ISC-Bugs #20824]
   1719 
   1720 - Add an elapsed time option to the release message and refactor the
   1721   code to move most of the common code to a single routine.
   1722   [ISC-Bugs #21171].
   1723 
   1724 - Two identical log messages for commit_leases() have been disambiguated.
   1725   [ISC-Bugs #18915]
   1726 
   1727 - Parse date strings more properly - the code now handles semi-colons in
   1728   date strings correctly.  Thanks to a patch from Jiri Popelka at Red Hat.
   1729   [ISC-Bugs #21501, #20598]
   1730 
   1731 - Fixes to lease input and output.
   1732   [ISC-Bugs #20418] - Some systems don't support the "%s" argument to
   1733   strftime, paste together the same string using mktime instead.
   1734   [ISC-Bugs #19596] - When parsing iaid values accept printable
   1735   characters.
   1736   [ISC-Bugs #21585] - Always print time values in omshell as hex
   1737   instead of ascii if the values happen to be printable characters.
   1738 
   1739 - Minor changes for scripts, configure.ac and Makefiles
   1740   [ISC-Bugs #19147] Use domain-search instead of domain-name in manual and
   1741                     example conf file.  Thanks to a patch from David Cantrell
   1742                     at Red Hat.
   1743   [ISC-Bugs #19761] Restore address when doing a rebind in DHCPv6
   1744   [ISC-Bugs #19945] Properly close the quote on some arguments.
   1745   [ISC-Bugs #20952] Add 64 bit types to configure.ac
   1746   [ISC-Bugs #21308] Add "PATH=" to CLIENT_PATH environment variable
   1747 
   1748 - Update the code to parse dhcpv6 lease files to accept a semi-colon at
   1749   the end of the max-life and preferred-life clauses.  In order to be
   1750   backwards compatible with older lease files not finding a semi-colon
   1751   is also accepted.  [ISC-Bugs #22303].
   1752 
   1753 ! Handle a relay forward message with an unspecified address in the
   1754   link address field.  Previously such a message would cause the
   1755   server to crash.  Thanks to a report from John Gibbins.  [ISC-Bugs #21992]
   1756   CERT: VU#102047 CVE: CVE-2010-3611
   1757 
   1758 - ./configure on longer searches for -lcrypto to explicitly link against.
   1759   This fixes a bug where 'dhclient' would have shared library dependencies
   1760   on '/usr/lib'.  [ISC-Bugs #21967]
   1761 
   1762 - Handle pipe failures more gracefully.  Some OSes pass a SIGPIPE
   1763   signal to a process and will kill the process if the signal isn't
   1764   caught.  This patch adds code to turn off the SIGPIPE signal via
   1765   a setsockopt() call.  The signal is already being ignored as part
   1766   of the ISC library.  [ISC-Bugs #22269]
   1767 
   1768 - Restore printing of values in omshell to the style pre 21585.  For
   1769   21585 we changed the print routines to always display time values
   1770   as a hex list.  This had a side effect of printing all data strings
   1771   as a hex list.  We shall investigate other ways of displaying time
   1772   values more usefully.  [ISC-Bugs #22626]
   1773 
   1774 ! Fix the handling of connection requests on the failover port.
   1775   Previously a connection request from a source that wasn't
   1776   listed as a failover peer would cause the server to become
   1777   non-responsive.  Thanks to a report from Brad Bendily, brad (a] bendily.com.
   1778   [ISC-Bugs #22679]
   1779   CERT: VU#159528 CVE: CVE-2010-3616
   1780 
   1781 - Don't pass the ISC_R_INPROGRESS status to the omapi signal handlers.
   1782   Passing it through to the handlers caused the omshell program to fail
   1783   to connect to the server.  [ISC-Bugs #21839]
   1784 
   1785 - Fix the parenthesis in the code to process configuration statements
   1786   beginning with "auth".  The previous arrangement caused
   1787   "auto-partner-down" to be processed incorrectly.  [ISC-Bugs #21854]
   1788 
   1789 - Limit the timeout period allowed in the dispatch code to 2^^32-1 seconds.
   1790   Thanks to a report from Jiri Popelka at Red Hat.
   1791   [ISC-Bugs #22033], [Red Hat Bug #628258]
   1792 
   1793 - When processing the format flags for a given option consume the
   1794   flag indicating an optional value correctly.  A symptom of this
   1795   bug was an infinite loop when trying to parse the slp-service-scope
   1796   option.  Thanks to a patch from Marius Tomaschewski.
   1797   [ISC-Bugs #22055]
   1798 
   1799 - Disable the use of kqueue in the ISC library.  This avoids a problem
   1800   between the fork and socket code that caused the dhcpd process to
   1801   use all available cpu if the program daemonized itself.
   1802   [ISC-Bugs #21911]
   1803 
   1804 ! When processing a request in the DHCPv6 server code that specifies
   1805   an address that is tagged as abandoned (meaning we received a
   1806   decline request for it previously) don't attempt to move it from
   1807   the inactive to active pool as doing so can result in the server
   1808   crashing on an assert failure.  Also retag the lease as active
   1809   and reset its timeout value.
   1810   [ISC-Bugs #21921]
   1811 
   1812 - Removed the restriction on using IPv6 addresses in IPv4 mode.  This
   1813   allows IPv4 options which contain IPv6 addresses to be specified.  For
   1814   example the 6rd option can be specified and used like this:
   1815   [ISC-Bugs #23039]
   1816 
   1817 	option 6rd code 212 = { integer 8, integer 8,
   1818 				ip6-address, array of ip-address };
   1819 	option 6rd 16 10 2001:: 1.2.3.4, 5.6.7.8;
   1820 
   1821 - Handle some DDNS corner cases better.  Maintain the DDNS transaction
   1822   information when updating a lease and cancel any existing transactions
   1823   when removing the ddns information.
   1824   [ISC-Bugs #23103]
   1825 
   1826 - Some fixes for LDAP
   1827   [ISC-Bugs #21783] - Include lber library when building ldap
   1828   [ISC-Bugs #22888] - Enable the ldap code when buidling common
   1829   The above fixes are from Jiri Popelka at Red Hat.
   1830 
   1831 - Modify the dlpi code to accept getmsg() returning a positive value.
   1832   [ISC-Bugs #22824]
   1833 
   1834 ! In dhclient check the data for some string options for
   1835   reasonableness before passing it along to the script that
   1836   interfaces with the OS.
   1837   [ISC-Bugs #23722]
   1838   CVE: CVE-2011-0997
   1839 
   1840 - DHCPv6 server now responds properly if client asks for a prefix that
   1841   is already assigned to a different client. [ISC-Bugs #23948]
   1842 
   1843 - Add the option "--no-pid" to the client, relay and server code,
   1844   to disable writing a pid file.  Add the option "-pf pidfile"
   1845   to the relay to allow the user to supply the pidfile name at
   1846   runtime.  Add the "with-relay6-pid-file" option to configure
   1847   to allow the user to supply the pidfile name for the relay
   1848   in v6 mode at configure time.
   1849   [ISC-Bugs #23351] [ISC-Bugs #17541]
   1850 
   1851 - 'dhclient' no longer waits a random interval after first starting up to
   1852   begin in the INIT state.  This conforms to RFC 2131, but elects not to
   1853   implement a 'SHOULD' direction in section 4.1. The goal of this change
   1854   is to start up faster. [ISC-Bugs #19660]
   1855 
   1856 - Added 'initial-delay' parameter that specifies maximum amount of time
   1857   before client goes to the INIT state. The default value is 0. In previous
   1858   versions of the code client could wait up to 5 seconds. The old behavior
   1859   may be restored by using 'initial-delay 5;' in the client config file.
   1860   [ISC-Bugs #19660]
   1861 
   1862 - ICMP ping-check should now sit closer to precisely the number of seconds
   1863   configured (or default 1), due to making use of the new microsecond
   1864   scale timer internally to dhcpd.  This corrects a bug where the server
   1865   may immediately timeout an ICMP ping-check if it was made late in the
   1866   current second. [ISC-Bugs #19660]
   1867 
   1868 - The DHCP client will schedule renewal and rebinding events in
   1869   microseconds if the DHCP server provided a lease-time that would result
   1870   in sub-1-second timers.  This corrects a bug where a 2-second or lower
   1871   lease-time would cause the DHCP client to enter an infinite loop by
   1872   scheduling renewal at zero seconds. [ISC-Bugs #19660]
   1873 
   1874 - Client lease records are recorded at most once every 15 seconds.  This
   1875   keeps the client from filling the lease database disk quickly on very small
   1876   lease times. [ISC-Bugs #19660]
   1877 
   1878 - To defend against RFC 2131 non-compliant DHCP servers which fail to
   1879   advertise a lease-time (either mangled, or zero in value) the DHCP
   1880   client now adds the server to the reject list ACL and returns to INIT
   1881   state to hopefully find an RFC 2131 compliant server (or retry in INIT
   1882   forever). [ISC-Bugs #19660]
   1883 
   1884 - Parameters configured to evaluate from user defined function calls can
   1885   now be correctly written to dhcpd.leases (as on 'on events' or dynamic
   1886   host records inserted via OMAPI).  [ISC-Bugs #22266]
   1887 
   1888 - If a 'next-server' parameter is configured in a dynamic host record via
   1889   OMAPI as a domain name, the syntax written to disk is now correctly parsed
   1890   upon restart.  [ISC-Bugs #22266]
   1891 
   1892 - The DHCP server now responds to DHCPLEASEQUERY messages from agents using
   1893   IP addresses not covered by a subnet in configuration.  Whether or not to
   1894   respond to such an agent is still governed by the 'allow leasequery;'
   1895   configuration parameter, in the case of an agent not covered by a configured
   1896   subnet the root configuration area is examined. Server now also returns
   1897   vendor-class-id option, if client sent it. [ISC-Bugs #21094]
   1898 
   1899 - Documentation fixes
   1900   [ISC-Bugs #17959] add text to AIX section describing how to have it send
   1901   responses to the all-ones address.
   1902   [ISC-Bugs #19615] update the includes in dhcpctl/dhcpctl.3 to be more correct
   1903   [ISC-Bugs #20676] update dhcpd.conf.5 to include the RFC numbers for DDNS
   1904 
   1905 - Relay no longer crashes, when DHCP packet is received over interface without
   1906   any IPv4 address assigned. Also extended logging message about discarding
   1907   packets with invalid hlen with information about relevant interface name.
   1908   [ISC-Bugs #22409]
   1909 
   1910 - Relay now properly logs that packet was received over interface without
   1911   global IPv6 address [ISC-Bugs #24070]
   1912 
   1913 - Linux Packet Filter interface improvement. sockaddr_pkt structure is used,
   1914   rather than sockaddr. Packet ethertype is now forced to ETH_P_IP.
   1915   [ISC-Bugs #18975]
   1916 
   1917 - Minor code cleanups - but note port change for #23196
   1918   [ISC-Bugs #23470] - Modify when an ignore return macro is defined to
   1919   handle unsed error return warnings for more versions of gcc.
   1920   [ISC-Bugs #23196] - Modify the reply handling in the server code to
   1921   send to a specified port rather than to the source port for the incoming
   1922   message.  Sending to the source port was test code that should have
   1923   been removed.  The previous functionality may be restored by defining
   1924   REPLY_TO_SOURCE_PORT in the includes/site.h file.  We suggest you don't
   1925   enable this except for testing purposes.
   1926   [ISC-Bugs #22695] - Close a file descriptor in an error path.
   1927   [ISC-Bugs #19368] - Tidy up variable types in validate_port.
   1928 
   1929 - Code cleanup: remove obsolete PROTO, KandR, INLINE and ANSI_DECL macros
   1930   [ISC-Bugs #13151]
   1931 
   1932 - Compilation problem with gcc4.5 and omshell.c resolved. [ISC-Bugs #23831]
   1933 
   1934 - Client Script fixes
   1935   [ISC-Bugs #23045] Typos in client/scripts/openbsd
   1936   [ISC-Bugs #23565] In the client scripts add a zone id (interface id) if
   1937   the domain search address is link local.
   1938   [ISC-Bugs #1277] In some of the client scripts add code to handle the
   1939   case of the default router information being changed without the address
   1940   being changed.
   1941 
   1942 - Documentation cleanup
   1943   [ISC-Bugs #23326] Updated References document, several man page updates
   1944 
   1945 - Server no longer complains about NULL pointer when configured
   1946   server-identifier expression fails to evaluate. [ISC-Bugs #24547]
   1947 
   1948 - Convert ISC_R_INPROGRESS status to ISC_R_SUCCESS when called from other
   1949   than the dispatch handler.  This fixes an issue where omshell, when
   1950   run from the same platform as the server, would appear to fail to
   1951   connect.  This is a companion to #21839.  [ISC-Bugs #23592]
   1952 
   1953 - Enlarge the buffer size used by the Omshell code and some of the
   1954   print routines to allow for greater than 60 characters or, when
   1955   printing as hex strings, 20 characters.  [ISC-Bugs #22743]
   1956 
   1957 - In Solaris 11 switch to using sockets instead of DLPI, thanks
   1958   to a patch form Oracle.  [ISC-Bugs #24634].
   1959 
   1960 - Strict checks for content of domain-name DHCPv4 option can now be
   1961   configured during compilation time. Even though RFC2132 does not allow
   1962   to store more than one domain in domain-name option, such behavior is
   1963   now enabled by default, but this may change some time in the future.
   1964   See ACCEPT_LIST_IN_DOMAIN_NAME define in includes/site.h.
   1965   [ISC-Bugs #24167]
   1966 
   1967 - DNS Update fix. A misconfigured server could crash during DNS update
   1968   processing if the configuration included overlapping pools or
   1969   multiple fixed-address entries for a single address.  This issue
   1970   affected both IPv4 and IPv6. The fix allows a server to detect such
   1971   conditions, provides the user with extra information and recommended
   1972   steps to fix the problem.  If the user enables the appropriate option
   1973   in site.h then server will be terminated
   1974   [ISC-Bugs #23595]
   1975 
   1976 ! Two packets were found that cause a server to halt.  The code
   1977   has been updated to properly process or reject the packets as
   1978   appropriate.  Thanks to David Zych at University of Illinois
   1979   for reporting this issue.  [ISC-Bugs #24960]
   1980   One CVE number for each class of packet.
   1981   CVE-2011-2748
   1982   CVE-2011-2749
   1983 
   1984 - Fix the code that checks for an existing DDNS transaction to cancel
   1985   when removing DDNS information, so that we will continue with the
   1986   processing if we have a lease even if it doesn't have an outstanding
   1987   transaction.  [ISC-Bugs #24682]
   1988 
   1989 - Add AM_MAINTAINER_MODE to configure.ac to avoid rebuilding
   1990   configuration files.  [ISC-Bugs #24107]
   1991 
   1992 - Add support for passing DDNS information to a DNS server over
   1993   an IPv6 address.  [ISC-Bugs #22647]
   1994 
   1995 - Enhanced patch for 23595 to handle IPv4 fixed addresses more
   1996   cleanly.  [ISC-Bugs #23595]
   1997 
   1998 ! Add a check for a null pointer before calling the regexec function.
   1999   Without this check we could, under some circumstances, pass
   2000   a null pointer to the regexec function causing it to segfault.
   2001   Thanks to a report from BlueCat Networks.
   2002   [ISC-Bugs #26704].
   2003   CVE: CVE-2011-4539
   2004 
   2005 ! Modify the DDNS handling code.  In a previous patch we added logging
   2006   code to the DDNS handling.  This code included a bug that caused it
   2007   to attempt to dereference a NULL pointer and eventually segfault.
   2008   While reviewing the code as we addressed this problem, we determined
   2009   that some of the updates to the lease structures would not work as
   2010   planned since the structures being updated were in the process of
   2011   being freed: these updates were removed.  In addition we removed an
   2012   incorrect call to the DDNS removal function that could cause a failure
   2013   during the removal of DDNS information from the DNS server.
   2014   Thanks to Jasper Jongmans for reporting this issue.
   2015   [ISC-Bugs #27078]
   2016   CVE: CVE-2011-4868
   2017 
   2018 - Fixed the code that checks if an address the server is planning
   2019   to hand out is in a reserved range.  This would appear as
   2020   the server being out of addresses in pools with particular ranges.
   2021   [ISC-Bugs #26498]
   2022 
   2023 - In the DDNS code handle error conditions more gracefully and add more
   2024   logging code.  The major change is to handle unexpected cancel events
   2025   from the DNS client code.
   2026   [ISC-Bugs #26287]
   2027 
   2028 - Tidy up the receive calls and eliminate the need for found_pkt.
   2029   [ISC-Bugs #25066]
   2030 
   2031 - Add support for Infiniband over sockets to the server and
   2032   relay code.  We've tested this on Solaris and hope to expand
   2033   support for Infiniband in the future.  This patch also corrects
   2034   some issues we found in the socket code.
   2035   [ISC-Bugs #24245]
   2036 
   2037 - Add a compile time check for the presence of the noreturn attribute
   2038   and use it for log_fatal if it's available.  This will help code
   2039   checking programs to eliminate false positives.
   2040   [ISC-Bugs #27539]
   2041 
   2042 - Fixed many compilation problems ("set, but not used" warnings) for
   2043   gcc 4.6 that may affect Ubuntu 11.10 users. [ISC-Bugs #27588]
   2044 
   2045 - Modify the code that determines if an outstanding DDNS request
   2046   should be cancelled.  This patch results in cancelling the
   2047   outstanding request less often.  It fixes the problem caused
   2048   by a client doing a release where  the TXT and PTR records
   2049   weren't removed from the DNS.
   2050   [ISC-BUGS #27858]
   2051 
   2052 - Use offsetof() instead of sizeof() to get the sizes for dhcpv6_relay_packet
   2053   and dhcpv6_packet in several more places.  Thanks to a report from
   2054   Bruno Verstuyft and Vincent Demaertelaere of Excentis.
   2055   [ISC-Bugs #27941]
   2056 
   2057 - Remove outdated note in the description of the bootp keyword about the
   2058   option not satisfying the requirement of failover peers for denying
   2059   dynamic bootp clients.
   2060   [ISC-bugs #28574]
   2061 
   2062 - Multiple items to clean up IPv6 address processing.
   2063   When processing an IA that we've seen check to see if the
   2064   addresses are usable (not in use by somebody else) before
   2065   handing it out.
   2066   When reading in leases from the file discard expired addresses.
   2067   When picking an address for a client include the IA ID in
   2068   addition to the client ID to generally pick different addresses
   2069   for different IAs.
   2070   [ISC-Bugs #23138] [ISC-Bugs #27945] [ISC-Bugs #25586]
   2071   [ISC-Bugs #27684]
   2072 
   2073 - Remove unnecessary checks in the lease query code and clean up
   2074   several compiler issues (some dereferences of NULL and treating
   2075   an int as a boolean).
   2076   [ISC-Bugs #26203]
   2077 
   2078 - Fix the NA and PD allocation code to handle the case where a client
   2079   provides a preference and the server doesn't have any addresses or
   2080   prefixes available.  Previously the server ignored the request with
   2081   this patch it replies with a NoAddrsAvail or NoPrefixAvail response.
   2082   By default the code performs according to the errata of August 2010
   2083   for RFC 3315 section 17.2.2; to enable the previous style see the
   2084   section on RFC3315_PRE_ERRATA_2010_08 in includes/site.h.  This option
   2085   may be removed in the future.
   2086   Thanks to Jiri Popelka at Red Hat for the patch.
   2087   [ISC-Bugs #22676]
   2088 
   2089 - Fix up some issues found by static analysis.
   2090   A potential memory leak and NULL dereference in omapi.
   2091   The use of a boolean test instead of a bitwise test in dst.
   2092   [ISC-Bugs #28941]
   2093 
   2094 - Rotate the lease file when running in v6 mode.
   2095   Thanks to Christoph Moench-Tegeder at Astaro for the
   2096   report and the first version of the patch.
   2097   [ISC-Bugs #24887]
   2098 
   2099 - Correct code to calculate timing values in client to compare
   2100   rebind value to infinity instead of renew value.
   2101   Thanks to Chenda Huang from H3C Technologies Co., Limited
   2102   for reporting this issue.
   2103   [ISC-Bugs #29062]
   2104 
   2105 - Fix some issues in the code for parsing and printing options.
   2106   [ISC-Bugs #22625] - properly print options that have several fields
   2107   followed by an array of something for example "fIa"
   2108   [ISC-Bugs #27289] - properly parse options in declarations that have
   2109   several fields followed by an array of something for example "fIa"
   2110   [ISC-Bugs #27296] - properly determine if we parsed a 16 or 32 bit
   2111   value in evaluate_numeric_expression (extract-int).
   2112   [ISC-Bugs #27314] - properly parse a zero length option from
   2113   a lease file.  Thanks to Marius Tomaschewski from SUSE for the report
   2114   and prototype patch for this ticket as well as ticket 27289.
   2115 
   2116 ! Previously the server code was relaxed to allow packets with zero
   2117   length client ids to be processed.  Under some situations use of
   2118   zero length client ids can cause the server to go into an infinite
   2119   loop.  As such ids are not valid according to RFC 2132 section 9.14
   2120   the server no longer accepts them.  Client ids with a length of 1
   2121   are also invalid but the server still accepts them in order to
   2122   minimize disruption.  The restriction will likely be tightened in
   2123   the future to disallow ids with a length of 1.
   2124   Thanks to Markus Hietava of Codenomicon CROSS project for the
   2125   finding this issue and CERT-FI for vulnerability coordination.
   2126   [ISC-Bugs #29851]
   2127   CVE: CVE-2012-3571
   2128 
   2129 ! When attempting to convert a DUID from a client id option
   2130   into a hardware address handle unexpected client ids properly.
   2131   Thanks to Markus Hietava of Codenomicon CROSS project for the
   2132   finding this issue and CERT-FI for vulnerability coordination.
   2133   [ISC-Bugs #29852]
   2134   CVE: CVE-2012-3570
   2135 
   2136 ! A pair of memory leaks were found and fixed.  Thanks to
   2137   Glen Eustace of Massey University, New Zealand for finding
   2138   this issue.
   2139   [ISC-Bugs #30024]
   2140   CVE: CVE-2012-3954
   2141 
   2142 - Existing legacy unit-tests have been migrated to Automated Test
   2143   Framework (ATF). Several new tests have been developed. To enable
   2144   unit-tests, please use --with-atf in configure script. A Developer's
   2145   Guide has been added. To generate it, please use make devel in
   2146   the doc directory. It is currently in early stages of development,
   2147   but is expected to grow in the near future. [ISC-Bugs 25901]
   2148 
   2149 ! An issue with the use of lease times was found and fixed.  Making
   2150   certain changes to the end time of an IPv6 lease could cause the
   2151   server to abort.  Thanks to Glen Eustace of Massey University,
   2152   New Zealand for finding this issue.
   2153   [ISC-Bugs #30281]
   2154   CVE: CVE-2012-3955
   2155 
   2156 - Update the memory leakage debug code to work with v6.
   2157   [ISC-Bugs #30297]
   2158 
   2159 - Relax the requirements for deleting an A or AAAA record.
   2160   Previously the DDNS removal code required both the A or AAAA
   2161   record and the TXT record to exist.  This requirement could
   2162   cause problems if something interrupted the removal leaving
   2163   the TXT record alone.  This relaxation was codified in RFC 4703.
   2164   [ISC-Bugs #30734]
   2165 
   2166 - Modify the failover code to handle incorrect peer names
   2167   better.  Previously the structure holding the name might
   2168   have been freed inappropriately in some cases and not
   2169   freed in other cases.
   2170   [ISC-Bugs #30320]
   2171 
   2172 - Add a configure option, enable-secs-byteorder, to deal with
   2173   clients that do the byte ordering on the secs field incorrectly.
   2174   This field should be in network byte order but some clients
   2175   get it wrong.  When this option is enabled the server will examine
   2176   the secs field and if it looks wrong (high byte non zero and low
   2177   byte zero) swap the bytes.  The default is disabled.  This option
   2178   is only useful when doing load balancing within failover.
   2179   [ISC-Bugs #26108]
   2180 
   2181 - Fix a set of issues that were discovered via a code inspection
   2182   tool.  Thanks to Jiri Popelka and Tomas Hozza Red Hat for the logs
   2183   and patches.
   2184   [ISC-Bugs #23833]
   2185 
   2186 - Parsing unquoted base64 strings improved. Parser now properly handles
   2187   strings that contain reserved names. [ISC-Bugs #23048]
   2188 
   2189 - Modify the nak_lease function to make some attempts to find a
   2190   server-identifier option to use for the NAK.
   2191   [ISC-Bugs #25689]
   2192 
   2193 - The client now passes information about the options it requested
   2194   from the server to the script code via environment variables.
   2195   These variables are of the form requested_<option_name>=1 with
   2196   the option name being the same as used in the new_* and old_*
   2197   variables.
   2198   [ISC-Bugs #29068]
   2199 
   2200 - Add support for a simple check that the server id in a request message
   2201   to a failover peer matches the server id of the server.  This support
   2202   is enabled by editing the file includes/site.h and uncommenting the
   2203   definition for SERVER_ID_CHECK.  The option has several restrictions
   2204   and issues - please read the comment in the site.h file before
   2205   enabling it.
   2206   [ISC-Bugs #31463]
   2207 
   2208 - Tidy up some compiler issues in the debug code.
   2209   [ISC-Bugs #26460]
   2210 
   2211 - Move the dhcpd.conf example file to dhcpd.conf.example to avoid
   2212   overwriting the dhcpd.conf file when installing a new version of
   2213   ISC DHCP.  The user will now need to manual copy and edit the
   2214   dhcpd.conf file as desired.
   2215   [ISC-Bugs #19337]
   2216 
   2217 - Check the status value when trying to read from a connection to
   2218   see if it may have been closed.  If it appears closed don't try
   2219   to read from it again.  This avoids a potential busy-wait like
   2220   loop when the peer names are mismatched.
   2221   [ISC-Bugs #31231]
   2222 
   2223 - Remove an unused variable to keep compilers happy.
   2224   [ISC-Bugs #31983]
   2225 
   2226 - Modify test makefiles to be more similar to standard makefiles
   2227   and comment out a currently unused test.
   2228   [ISC-Bugs #32089]
   2229 
   2230 - Address static analysis warnings.
   2231   [ISC-Bugs #33510] [ISC-Bugs #33511]
   2232 
   2233 - Silence benign static analysis warnings.
   2234   [ISC-Bugs #33428]
   2235 
   2236 - Add check for 64-bit package for atf.
   2237   [ISC-Bugs #32206]
   2238 
   2239 - Use newer auto* tool packages and turn on RFC_3542 support on Mac OS.
   2240   [ISC-Bugs #26303]
   2241 
   2242 - Remove a variable when it isn't being used due to #ifdefs to avoid
   2243   a compiler warning on Solaris using GCC.
   2244   [ISC-Bugs #33032]
   2245 
   2246 - Add a check for too much whitespace in a config or lease file.
   2247   Thanks to Paolo Pellegrino for finding the issue and a suggestion
   2248   for the patch.
   2249   [ISC-Bugs #33351]
   2250 
   2251 - Fix several problems with using OMAPI to manipulate class and subclass
   2252   objects.
   2253   [ISC-Bugs #27452]
   2254 
   2255 - Added a sleep call after killing the old client to allow time
   2256   for the sockets to be cleaned.  This should allow the -r option
   2257   to work more consistently.
   2258   [ISC-Bugs #18175]
   2259 
   2260 - Missing files for ISC DHCP Developer's Guide are now included in
   2261   the release tarballs. To generate this documentation, please use
   2262   make devel command in doc directory. [ISC-Bugs #32767]
   2263 
   2264 - Update client script for use with openwrt.
   2265   [ISC-Bugs #29843]
   2266 
   2267 - Fix the socket handling for DHCPv6 clients to allow multiple instances
   2268   of a client on a single machine to work properly.  Previously only
   2269   one client would receive the packets.  Thanks to Jiri Popelka at Red Hat
   2270   for the bug report and a potential patch.
   2271   [ISC-Bugs #34784]
   2272 
   2273 - Added support for gentle shutdown after signal is received.
   2274   [ISC-Bugs #32692] [ISC-Bugs 34945]
   2275 
   2276 - Enhance the DHCPv6 server logging to include the addresses that are assigned
   2277   to the clients.
   2278   [ISC-Bugs #26377]
   2279 
   2280 - Fix an operation in the DDNS code to be a bitwise instead of logical or.
   2281   [ISC-Bugs #35138]
   2282 
   2283 
   2284 			Changes since 4.1.0 (new features)
   2285 
   2286 - Failover port configuration can now be left to defaults (port 647) as
   2287   described in the -12 revision of the Failover draft (and assigned by
   2288   IANA).  Thanks in part to a patch from David Cantrell at Red Hat.
   2289 
   2290 - If configured, dhclient may now transmit to an anycast MAC address,
   2291   rather than using a broadcast address.  Thanks to a patch from David
   2292   Cantrell at Red Hat.
   2293 
   2294 - Added client support for setting interface MTU and metric, thanks to
   2295   Roy "UberLord" Marples <roy (a] marples.name>.
   2296 
   2297 - Added client -D option to specify DUID type to send.
   2298 
   2299 - A new failover configuration parameter has been introduced for those
   2300   environments where DHCP servers can be reasonably guaranteed to be
   2301   "down" when the failover TCP socket is severed, "auto-partner-down".
   2302   This parameter is not generally safe, and by default is disabled, so
   2303   please carefully review the documentation of this parameter in the
   2304   dhcpd.conf(5) manpage before determining to use it yourself.
   2305 
   2306 - Added a configuration function, 'gethostname()', which calls the system
   2307   function of the same name and presents the results as a data expression.
   2308   This function can be used to incorporate the system level hostname of
   2309   the system the DHCP software is operating on in responses or queries (such
   2310   as including a failover partner's hostname in a dhcp message or binding
   2311   scope, or having a DHCP client send any system hostname in the host-name or
   2312   FQDN options by default).
   2313 
   2314 - The dhcp-renewal-time and dhcp-rebinding-time options may now be configured
   2315   for DHCPv4 operation and used independently of the dhcp-lease-time
   2316   calculations.  Invalid renew and rebinding times (e.g., greater than the
   2317   determined lease time) are omitted.
   2318 
   2319 - Processing the DHCP to DNS server transactions in an asynchronous fashion,
   2320   the DHCP server or client can now continue with its processing while
   2321   awaiting replies from the DNS server.
   2322 
   2323 - The 'hardware [ethernet|etc] ...;' parameter in host records has been
   2324   extended to attempt to match DHCPv6 clients by the last octets of a
   2325   DUID-LL or DUID-LLT provided by the client.
   2326 
   2327 			Changes since 4.1.0 (bug fixes)
   2328 
   2329 - Remove infinite loop in token_print_indent_concat().
   2330 
   2331 - Validate the argument to the -p option.
   2332 
   2333 - The notorious 'option <unknown> ... larger than buffer' log line,
   2334   which is seen in some malformed DHCP client packets, was modified.
   2335   It now logs the universe name, and does not log the length values
   2336   (which are bogus corruption read from the packet anyway).  It also
   2337   carries a hopefully more useful explanation.
   2338 
   2339 - Suppress spurious warnings from configure about --datarootdir
   2340 
   2341 - A bug was fixed that caused the server not to answer some valid Solicit
   2342   and Request packets, if the dynamic range covering any requested addresses
   2343   had been deleted from configuration.
   2344 
   2345 - Update the code to deal with GCC 4.3.  This included two sets of changes.
   2346   The first is to the configuration files to include the use of
   2347   AC_USE_SYSTEM_EXTENSIONS.  The second is to deal with return values that
   2348   were being ignored.
   2349 
   2350 - The db-time-format option was documented in manpages.
   2351 
   2352 - Using reserved leases no longer results in 'lease with binding state
   2353   free not on its queue' error messages, thanks to a patch from Frode
   2354   Nordahl.
   2355 
   2356 - Fix a build error in dhcrelay, using older versions of gcc with
   2357   dhcpv6 disabled.
   2358 
   2359 - Two uninitialized stack structures are now memset to zero, thanks to a
   2360   patch from David Cantrell at Red Hat.
   2361 
   2362 - Fixed a cosmetic bug where pretty-printing valid domain-search options would
   2363   result in an erroneous error log message ('garbage in format string').
   2364 
   2365 - A bug in DLPI packet transmission (Solaris, HP/UX) that caused the server
   2366   to stop receiving packets is fixed.  The same fix also means that the MAC
   2367   address will no longer appear 'bogus' on DLPI-based systems.
   2368 
   2369 - A bug in select handling was discovered where the results of one select()
   2370   call were discarded, causing the server to process the next select() call
   2371   and use more system calls than required.  This has been repaired - the
   2372   sockets will be handled after the first return from select(), resulting in
   2373   fewer system calls.
   2374 
   2375 - The update-conflict-detection feature would leave an FQDN updated without
   2376   a DHCID (still currently implemented as a TXT RR).  This would cause later
   2377   expiration or release events to fail to remove the domain name.  The feature
   2378   now also inserts the client's up to date DHCID record, so records may safely
   2379   be removed at expiration or release time.  Thanks to a patch submitted by
   2380   Christof Chen.
   2381 
   2382 - Memory leak in the load_balance_mine() function is fixed.  This would
   2383   leak ~20-30 octets per DHCPDISCOVER packet while failover was in use
   2384   and in normal state.
   2385 
   2386 - Various compilation fixes have been included for the memory related
   2387   DEBUG #defines in includes/site.h.
   2388 
   2389 - Fixed Linux client script 'unary operator expected' errors with DHCPv6.
   2390 
   2391 - Fixed setting hostname in Linux hosts that require hostname argument
   2392   to be double-quoted.  Also allow server-provided hostname to
   2393   override hostnames 'localhost' and '(none)'.
   2394 
   2395 - Fixed failover reconnection retry code to continue to retry to reconnect
   2396   rather than restarting the listener.
   2397 
   2398 - Compilation on Solaris with USE_SOCKETS defined in includes/site.h has
   2399   been repaired.  Other USE_ overrides should work better.
   2400 
   2401 - A check for the local flavor of IFNAMSIZ had a broken 'else' condition,
   2402   that probably still resulted in the correct behaviour (but wouldn't use
   2403   a larger defined value provided by the host OS).
   2404 
   2405 - Fixed a bug where an OMAPI socket disconnection message would not result
   2406   in scheduling a failover reconnection, if the link had not negotiated a
   2407   failover connect yet (e.g.: connection refused, asynch socket connect()
   2408   timeouts).
   2409 
   2410 - A bug was fixed that caused the 'conflict-done' state to fail to be parsed
   2411   in failover state records.
   2412 
   2413 ! A stack overflow vulnerability was fixed in dhclient that could allow
   2414   remote attackers to execute arbitrary commands as root on the system,
   2415   or simply terminate the client, by providing an over-long subnet-mask
   2416   option.  CERT VU#410676 - CVE-2009-0692
   2417 
   2418 - Fixed a bug where relay agent options would never be returned when
   2419   processing a DHCPINFORM.
   2420 
   2421 - Versions 3.0.x syntax with multiple name->code option definitions is now
   2422   supported.  Note that, similarly to 3.0.x, for by-code lookups only the
   2423   last option definition is used.
   2424 
   2425 - Fixed a bug where a time difference of greater than 60 seconds between a
   2426   failover pair could cause the primary to crash on contact with the
   2427   secondary.  Thanks to a patch from Steinar Haug.
   2428 
   2429 - Don't look for IPv6 interfaces on Linux when running in DHCPv4 mode.
   2430   Thanks to patches from Matthew Newton and David Cantrell.
   2431 
   2432 - Secondary servers in a failover pair will now perform ddns removals if
   2433   they had performed ddns updates on a lease that is expiring, or was
   2434   released through the primary.  As part of the same fix, stale binding scopes
   2435   will now be removed if a change in identity of a lease's active client is
   2436   detected, rather than simply if a lease is noticed to have expired (which it
   2437   may have expired without a failover server noticing in some situations).
   2438 
   2439 - A patch supplied by David Cantrell at RedHat was applied that detects
   2440   invalid calling parameters given to the ns_name_ntop() function.
   2441   Specifically, it detects if the caller passed a pointer and size pair
   2442   that causes the pointer to integer-wrap past zero.
   2443 
   2444 ! Fixed a fenceposting bug when a client had two host records configured,
   2445   one using 'uid' and the other using 'hardware ethernet'.  CVE-2009-1892
   2446 
   2447 - Fixed the check in the dhcp_interface_signal_handler routine to verify
   2448   the existence of the linked signal handler before calling it.
   2449 
   2450 - Both host and subnet6 configuration groups are now included whether a
   2451   fixed-address6 (DHCPv6) is in use or not.  Host scoped configuration takes
   2452   precedence.  This fixes two bugs, one where host scoped configuration
   2453   would not be included from a non-fixed-address6 host record, and the equal
   2454   and opposite bug where subnet6 scoped configuration would not be used when
   2455   over-riding values were not present in a matching fixed-address6 host
   2456   configuration.
   2457 
   2458 - ./configure now checks to ensure the intX_t and u_intX_t types are defined,
   2459   correcting a compilation failure when using Sun's compiler.
   2460 
   2461 - Modified the handling of a connection to avoid releasing the omapi io
   2462   object for the connection while it is still in use.  One symptom from
   2463   this error was a segfault when a failover secondary attempted to connect
   2464   to the failover primary if their clocks were not synchronized.
   2465 
   2466 - Clean up to allow compilation with gcc 2.95.4 on FreeBSD.  Remove an
   2467   extra semi-colon from common/dns.c and moved setting a variable to NULL
   2468   in server/dhcpv6.c to allow the compiler to decide that the variable
   2469   was always properly set.
   2470 
   2471 			Changes since 4.1.0b1
   2472 
   2473 - A missing "else" in dhcrelay.c could have caused an interface not to
   2474   be recognized.
   2475 
   2476 			Changes since 4.1.0a2
   2477 
   2478 - A cosmetic bug in DHCPDECLINE processing was fixed which caused all
   2479   successful DHCPDECLINEs to be logged as "not found" rather than
   2480   "abandoned".
   2481 
   2482 - Added configuration file examples for DHCPv6.
   2483 
   2484 - Some failover debugging #defines have been better defined and some
   2485   high frequency messages moved to a deeper debugging symbol.
   2486 
   2487 - The CLTT parameter in failover is now only updated by client activity,
   2488   and not by failover binding updates (taking on the peer's CLTT).
   2489 
   2490 - Failover BNDUPD messages are now discarded if they conflict with an
   2491   update that has been transmitted, but not acknowledged.
   2492 
   2493 - A bug cleaning up unknown-xxx temporary option definitions was fixed.
   2494 
   2495 - Delayed-ack is now a compile-time option, compiled out by default.
   2496   This feature is simply too experimental for right now, and causes
   2497   some problems to some failover installations.  We will revisit this
   2498   in future releases.
   2499 
   2500 - The !inet_pton() call in res_mkupdrec was adjusted to '<= 0' as
   2501   inet_pton returns either 1, 0, or -1.
   2502 
   2503 - A dhclient-script for MacOS X has been included, which enables
   2504   'dhclient -6' support.
   2505 
   2506 - DDNS removal routines were updated so that the DHCID is not removed until
   2507   the client has been deprived of all A and AAAA records (not only the last
   2508   one of either of those).  This resolves a bug where dual stack clients
   2509   would not be able to regain their names after either expiration event.
   2510 
   2511 			Changes since 4.1.0a1
   2512 
   2513 - Corrected list of failover state values in dhcpd man page.
   2514 
   2515 - Fixed a bug that caused some request types to be logged incorrectly.
   2516 
   2517 - Clients that sent a parameter request list containing the
   2518   routers option before the subnet mask option were receiving
   2519   only the latter.  Fixed.
   2520 
   2521 - The server wasn't always sending the FQDN option when it should.
   2522 
   2523 - A partner-down failover server no longer emits 'peer holds all free leases'
   2524   if it is able to newly-allocate one of the peer's leases.
   2525 
   2526 - Fixed a coredump when adding a class via OMAPI.
   2527 
   2528 - Check whether files are zero length before trying to parse them.
   2529 
   2530 - Ari Edelkind's PARANOIA patch has been included and may be compiled in
   2531   via two ./configure parameters, --enable-paranoia and
   2532   --enable-early-chroot.
   2533 
   2534 - ./configure was extended to cover many optional build features, such
   2535   as failover, server tracing, debugging, and the execute() command.
   2536 
   2537 - There is now a default 1/4 of a second scheduled delay between delayed
   2538   fsync()'s, it can be configured by the max-ack-delay configuration
   2539   parameter.
   2540 
   2541 - A bug was fixed where the length of a hostname was miscalculated, so that
   2542   hosts were given odd-looking domain names ("foo.bar.ba.example.com").
   2543 
   2544 - Shared network selection should be done from the innermost relay
   2545   valid link-address field, rather than the outermost.
   2546 
   2547 - Prefix pools are attached to shared network scopes.
   2548 
   2549 - Merged IA_XX related structures.
   2550 
   2551 - Add DHCPv6 files in configure.
   2552 
   2553 - A memory leak when using omapi has been fixed.
   2554 
   2555 - DHCPv6 vendor-class options (VSIO) are now only sent when they appear
   2556   on the DHCPv6 ORO.  This resolves a bug where VSIO options were placed
   2557   in IA_NA encapsulated options fields.
   2558 
   2559 - Integrated client with stateless, temporary address and prefix delegation
   2560   support.
   2561 
   2562 - A double-dereference in dhclient transmission of DHCPDECLINEs was
   2563   repaired.
   2564 
   2565 - Fix handling of format code 'Z'.
   2566 
   2567 - Support "-1" argument in DHCPv6.
   2568 
   2569 - Merge DHCPv6-only "dhcrelay6" into general-purpose "dhcrelay" (use
   2570   "-6" option to select DHCPv6 mode).
   2571 
   2572 - Fix handling of -A and -a flags in dhcrelay; it was failing to expand
   2573   packet size as needed to add relay agent options.
   2574 
   2575 - A bug in subnet6 parsing where options contained in subnet6 clauses would
   2576   not be applied to clients addressed within that network was repaired.
   2577 
   2578 - When configuring a "subnet {}" or "subnet6 {}" without an explicit
   2579   shared-network enclosing it, the DHCP software would synthesize a
   2580   shared-network to contain the subnet.  However, all configuration
   2581   parameters within the subnet more intuitively belong "to any client
   2582   on that interface", or rather the synthesized shared-network.  So,
   2583   when a shared-network is synthesized, it is used to contain the
   2584   configuration present inside the subnet {} clause.  This means that
   2585   the configuration will be valid for all clients on that network, not
   2586   just those addressed out of the stated subnet.  If you intended the
   2587   opposite, the workaround is to explicitly configure an empty
   2588   shared-network.
   2589 
   2590 - A bug was fixed where Information-Request processing was not sourcing
   2591   configured option values.
   2592 
   2593 - A warning was added since the DHCPv6 processing software does not yet
   2594   support class statements.
   2595 
   2596 - Compilation warnings on GCC 4.3 relating to bootp source address
   2597   selection were repaired.
   2598 
   2599 - The v6 BSD socket method was updated to use a single UDP BSD socket
   2600   no matter how many interfaces are involved, differentiating the
   2601   interfaces the packets were received on by the interface index supplied
   2602   by the OS.
   2603 
   2604 - The relay agent no longer listens to the All DHCP Servers Multicast
   2605   address.
   2606 
   2607 - A bug was fixed in data_string_sprintfa() where va_start was only called
   2608   once for two invocations of vsprintf() variants.
   2609 
   2610 - ERO (RFC 4994) server support.
   2611 
   2612 - Basic and partial DHCPv6 leasequery support.
   2613 
   2614 - Reliable DHCPv6 release (previous behavior, send release and exit, is
   2615   still available with dhclient -6 -1 -r).
   2616 
   2617 			Changes since 4.0.0 (new features)
   2618 
   2619 - Added DHCPv6 rapid commit support.
   2620 
   2621 - Added explicit parser support for zero-length DHCP options, such as
   2622   rapid-commit, via format code 'Z'.
   2623 
   2624 - It's now possible to update the "ends" field of a lease with OMAPI.
   2625   This is useful if you want not only to release a lease, but also make
   2626   it available for reuse right away.  Hat tip to Christof Chen.
   2627 
   2628 - Fixed definition of the iaaddr hash functions to use the correct
   2629   functions when referencing and dereferencing memory.
   2630 
   2631 - Some definitions not in phase with the IANA registry were updated.
   2632 
   2633 - Allocated interface IDs are better controlled ('u' bit set to zero,
   2634   reserved IDs avoided).
   2635 
   2636 - Unicast options are taken into account only for RENEWs.
   2637 
   2638 - NoAddrsAvail answers to SOLICITs are always ADVERTISEs even when a SOLICIT
   2639   carries a rapid-commit option.
   2640 
   2641 - Return in place of raise an impossible condition when one tries to release
   2642   an empty active lease.
   2643 
   2644 - Timer granularity is now 1/100s in the DHCPv6 client.
   2645 
   2646 - The dhclient-script was updated to create a host route for the default
   2647   gateway if the supplied subnet mask for an IPv4 address was a /32.  This
   2648   allows the client to work in 'captive' network environments, where the
   2649   operator does not want clients to crosstalk directly.
   2650 
   2651 - MINUS tokens should be parsable again.
   2652 
   2653 - Multiple (up to "delayed-ack x;" maximum) DHCPv4 packets are now queued and
   2654   released in bursts after single fsync() events when the upper limit is
   2655   reached or if the receiving sockets go dry.  The practical upshot is
   2656   that fsync-coupled server performance is now multiplicitively increased.
   2657   The default delayed ack limit is 28.  Thanks entirely to a patch from
   2658   Christof Chen.
   2659 
   2660 			Changes since 4.0.0 (bug fixes)
   2661 
   2662 - DHCP now builds on AIX.
   2663 
   2664 - Exit with warning when DHCPv6-specific statements are used in the
   2665   config file but -6 is not specified.
   2666 
   2667 - Fixed "--version" flag in dhcrelay
   2668 
   2669 - The 'min-secs' configuration parameter's log message has been updated to
   2670   be more helpful.
   2671 
   2672 - The warning logged when an address range doesn't fit in the subnets
   2673   they were declared has been updated to be more helpful and identify the
   2674   typo in configuration that created the spanning addresses.
   2675 
   2676 - A bug in failover pool rebalancing that caused POOLREQ message ping-pongs
   2677   was repaired.
   2678 
   2679 - A flaw in failover pool rebalancing that could cause POOLREQ messages to
   2680   be sent outside of the min-balance/max-balance scheduled intervals has
   2681   been repaired.
   2682 
   2683 - A cosmetic bug during potential-conflict recovery that caused the peer's
   2684   'conflict-done' state message to be logged as 'unknown-state' has been
   2685   repaired.  It is now logged correctly.
   2686 
   2687 - A bug was fixed where the 'giaddr' may be used to find the client's subnet
   2688   rather than its own 'ciaddr'.
   2689 
   2690 - A log message was introduced to clarify the situation where a failover
   2691   'address' parameter (the server's local address) did not resolve to an
   2692   IPv4 address.
   2693 
   2694 - The minimum site code value was set to 224 in 3.1.0 to track RFC3942.  This
   2695   broke a lot of legacy site local configurations.  The new code in place will
   2696   track site local space minimum option codes and logs a warning to encourage
   2697   updates and exploration of site local code migration problems.  Option
   2698   codes less than 128 in site local spaces remain inaccessible.
   2699 
   2700 - A possible relay agent option bug was repaired where random server
   2701   initialization state may have been used to signal the relay agent
   2702   information options sub-option code for the 'END' of the option space.
   2703 
   2704 - Fixes to allow code to compile and run on Solaris 9.
   2705 
   2706 - Fixes to allow code to compile on Mac OS X Leopard (10.5).
   2707 
   2708 - When server is configured with options that it overrides, a warning is
   2709   issued when the configuration file is read, rather than at the time the
   2710   option is overridden. This was important, because the warning was given
   2711   every time the option was overridden, which could create a lot of
   2712   unnecessary logging.
   2713 
   2714 - Fixed a compilation problems on platforms that define a value for FDDI,
   2715   which conflicts with a dhcp configuration syntax token by the same name.
   2716 
   2717 - When a failover server suspects it has encountered a peer running a
   2718   version 3.0.x failover server, a warning that the failover wire protocol
   2719   is incompatible is printed.
   2720 
   2721 - The failover server no longer issues a floating point error if it encounters
   2722   a previously undefined option code.
   2723 
   2724 - Fix startup error messages to report a missing "subnet6 declaration", rather
   2725   than a missing "subnet declaration", when running as a DHCPv6 server.
   2726 
   2727 - DHCPv6 client timestamp in DUID was based on the year 1970 rather
   2728   than the year 2000.
   2729 
   2730 - Warn when attempting to use a hardware parameter in DHCPv6.
   2731 
   2732 - DHCPv6 released resources are now marked as released by the client.
   2733 
   2734 - 'Soft' bindings have no more side-effects.
   2735 
   2736 			Changes since 4.0.0b3
   2737 
   2738 - The reverse dns name for PTR updates on IPv6 addresses has been fixed to
   2739   use ip6.arpa. rather than default to in-addr.arpa and require user
   2740   configuration.
   2741 
   2742 - dhc6_lease_destroy() and dhc6_ia_destroy() now set lease and IA pointers
   2743   to NULL after freeing, to prevent subsequent accesses to freed memory.
   2744 
   2745 - The DHCPv6 server would not send the preference option unless the
   2746   client requested it, via the ORO. This has been fixed, so the DHCPv6
   2747   server will always send the preference value if it is configured.
   2748 
   2749 - When addresses were passed as hints to the server in an IA, they were
   2750   incorrectly handled, sometimes being treated as an error. Now the
   2751   server will treat these as hints and ignore them if it cannot supply
   2752   a requested address.
   2753 
   2754 - If the client had multiple addresses, and one expired (was not renewed
   2755   by the server), the client would continue to attempt to renew the same
   2756   old address over and over.  Now, the client will omit any expired
   2757   addresses from future Confirm, Renew, or Rebind messages.
   2758 
   2759 - dhclient -6 will now select renew/rebind timers based upon the longest
   2760   address expiration time rather than the shortest expiration time, in
   2761   order to avoid cascading renewals in the event a server elects not to
   2762   extend one of multiple IAADDR leases.
   2763 
   2764 - The server now limits clients that request multiple addresses to one
   2765   address per IA by default, which can be adjusted through the
   2766   "limit-addrs-per-ia" configuration option.
   2767 
   2768 - The DHCPv6 client now issues fresh transaction IDs on Renew and Rebind
   2769   message exchanges, rather than using the most recent ID.
   2770 
   2771 - The DHCPv6 server now replies to Information-Request messages.
   2772 
   2773 - A bug was fixed in the dhclient-script for BSDs to correctly carry error
   2774   codes through some conditions.
   2775 
   2776 - The parsing of some options in the dhclient lease file, in particular
   2777   the success DHCPv6 status-code, was fixed.
   2778 
   2779 - A bug was fixed that caused the DHCPv6 ORO option to be corrupted with
   2780   seemingly random values.
   2781 
   2782 - A reference overleak in DHCPv6 shared network processing was repaired.
   2783 
   2784 - ./configure now autodetects local database locations rather than trying
   2785   to put dhcpd.leases and dhclient.leases in /usr/local/var/db, which no
   2786   one ever has.
   2787 
   2788 - Regression fix for bug where server advertised a IPv6 address in
   2789   response to a SOLICIT but would not return the address in response
   2790   to a REQUEST.
   2791 
   2792 - A bug was fixed where the DHCPv6 server puts the NoAddrsAvail status
   2793   code in the IA_NA was fixed.  The status code now appears in the root
   2794   level.
   2795 
   2796 			Changes since 4.0.0b2
   2797 
   2798 - Clarified error message when lease limit exceeded
   2799 
   2800 - Relative time may now be used as a qualifier for 'allow' and 'deny' access
   2801   control lists.  These directives may be used to assist in re-addressing
   2802   address pools without having to constantly reconfigure the server.  Please
   2803   see 'man dhcpd.conf' for more information on allow/deny 'after time' syntax.
   2804   Thanks to a patch from Christof Chen.
   2805 
   2806 - The server will now include multiple IA_NA's and multiple IAADDRs within
   2807   them, if advertised by the client.  It still only seeks to allocate one
   2808   new address.
   2809 
   2810 			Changes since 4.0.0b1
   2811 
   2812 - Use different paths for PID and lease files when running in DHCPv4
   2813   or DHCPv6 mode, so that servers for both protocols can be run
   2814   simultaneously on a single interface.
   2815 
   2816 - Fixed a buffer overflow error which could have allowed a denial
   2817   of service under unusual server configurations
   2818 
   2819 - Eliminated a spurious error message from the client
   2820 
   2821 - A number of bugs with the internal handling of lease state on the
   2822   server have been fixed. Some of these could cause server crashes.
   2823 
   2824 - The peer_wants_leases() changes pulled up from 3.1.0 were corrected,
   2825   'never used' leases will no longer consistently shift between servers
   2826   on every pool rebalance run.
   2827 
   2828 - sendmsg()/recvmsg() control buffers are now declared in such a way to
   2829   ensure they are correctly aligned on all (esp. 64-bit) architectures.
   2830 
   2831 - The client leasing subsystem was streamlined and corrected to account
   2832   more closely for changes in client link attachment selection.
   2833 
   2834 			Changes since 4.0.0a3
   2835 
   2836 - The DHCP server no longer requires a "ddns-update-style" statement,
   2837   and now defaults to "none", which means DNS updates are disabled.
   2838 
   2839 - Log messages when failover peer names mismatch have been improved to
   2840   point out the problem.
   2841 
   2842 - Bug where server advertised a IPv6 address in response to a SOLICIT
   2843   but would not return the address in response to a REQUEST. Thanks to
   2844   Dennis Kou for finding the bug.
   2845 
   2846 - Fixed an error causing the server to lock up on lease expiration,
   2847   reported independently by Jothilingam Vasu and Dennis Kou.
   2848 
   2849 - Fixed a ./configure bug where compile tests were failing due to
   2850   "-Werror" (unused variable) rather than the actual test failure.  Lead
   2851   to inconsistent and unworkable auto-configurations.
   2852 
   2853 - Compilation with DLPI and -Werror has been repaired.
   2854 
   2855 - Error in decoding IA_NA option if multiple interfaces are present
   2856   fixed by Marcus Goller.
   2857 
   2858 - DHCPv6 server Confirm message processing has been enhanced - it no
   2859   longer replies only to clients with host {} records, it now replies
   2860   as directed in RFC3315 section 18.2.2 - that is, to all clients
   2861   regardless of the existence of bindings.
   2862 
   2863 - A core dump during expired lease cleanup has been repaired.
   2864 
   2865 - DDNS updates state information are now stored in 'binding scopes' that
   2866   follow the leases through their lifecycles.  This enables DDNS teardowns
   2867   on leases that are assigned and expired inbetween a server restart (the
   2868   state is recovered from dhcpd.leases).  Arbitrary user-specified binding
   2869   scopes ('set var = "value";') are not yet supported.
   2870 
   2871 - Additional compilation problems on HP/UX have been repaired.
   2872 
   2873 			Changes since 4.0.0a2
   2874 
   2875 - Fix for startup where there are no IPv4 addresses on an interface.
   2876   Thanks to Marcus Goller for reporting the bug.
   2877 
   2878 - Fixed file descriptor leak on listen failure. Thanks to Tom Clark.
   2879 
   2880 - Bug in server configuration parser caused server to get stuck on
   2881   startup for certain bad pool declarations. Thanks to Guillaume
   2882   Knispel for the bug report and fix.
   2883 
   2884 - Code cleaned to remove warnings reported by "gcc -Wall".
   2885 
   2886 - DHCPv6 is now the default. You can disable DHCPv6 support using the
   2887   "--disable-dhcpv6" flag when you run the configure script.
   2888 
   2889 - An internal database inconsistency bug was repaired where the server
   2890   would segfault if a client attempted to renew a lease that had been
   2891   loaded from persistent storage.
   2892 
   2893 - 'request' and 'also request' syntaxes have been added to accommodate
   2894   the DHCPv6 client configuration.  'send dhcp6.oro' is no longer
   2895   necessary.
   2896 
   2897 - Bug fixed where configuration file parsing did not work with
   2898   zero-length options; this made it impossible to set the
   2899   rapid-commit option.
   2900 
   2901 - Bogus messages about host records with IPv4 fixed-addresses being of
   2902   non-128-bits in length were removed.
   2903 
   2904 			Changes since 4.0.0a1
   2905 
   2906 - Bug in octal parsing fixed. Thanks to Bernd Fuhrmann for the report
   2907   and fix.
   2908 
   2909 - Autoconf now supplies proper flags for Solaris DHCPv6 builds.
   2910 
   2911 - Fix for parsing error on some IPv6 addresses.
   2912 
   2913 - Invalid CIDR representation for IPv6 subnets or ranges now checked
   2914   for when loading configuration.
   2915 
   2916 - Compilation on HP/UX has been repaired.  The changes should generally
   2917   apply to any architecture that supplies SIOCGLIFCONF but does not
   2918   use 'struct lifconf' structures to pass values.
   2919 
   2920 - Two new operators, ~= and ~~, have been integrated to implement
   2921   boolean matches by regular expression (such as may be used in
   2922   class matching statements).  Thanks to a patch by Alexandr S.
   2923   Agranovsky, which underwent slight modification.
   2924 
   2925 - Fix for icmp packets on 64-bit systems (bug introduced in 4.0).
   2926 
   2927 - A bug was fixed in interface discovery wherein an error identifying
   2928   a server-configured interface with no IPv4 addresses would SEGV.
   2929 
   2930 - Fixed a bug in which write_lease() might report a failure incorrectly
   2931 
   2932 - Added support for DHCPv6 Release messages
   2933 
   2934 - Added -x option to dhclient, which triggers dhclient processes
   2935   to exit gracefully without releasing leases first
   2936 
   2937 - All binaries (client, server, relay) now change directories
   2938   to / before going into daemon mode, so as not to hold $CWD open
   2939 
   2940 - Fixed a bug parsing DHCPv6 client-id's in host-identifier statements
   2941 
   2942 - Fixed a bug with the 'ddns-updates' boolean server configuration
   2943   parameter, which caused the server to fail.
   2944 
   2945 			Changes since 4.0.0-20070413
   2946 
   2947 - Old (expired) leases are now cleaned.
   2948 
   2949 - IPv6 subnets now have support for arbitrary allocation ranges via
   2950   a new 'range6' configuration directive.
   2951 
   2952 - An obviated option code hash lookup to find D6O_CLIENTID was removed.
   2953 
   2954 - Corrected some situations where variables might be used without being
   2955   initialized.
   2956 
   2957 - Silenced several other compiler warnings.
   2958 
   2959 - Include the more standard sys/uio.h rather than rely upon other
   2960   header files to include it (fixes a BSD 4.2 compile failure).
   2961 
   2962 - Duplicate dhclient-script updates for DHCPv6 to all provided scripts.
   2963 
   2964 - DHCPv4 I/O methods that failed to sense hardware address were corrected.
   2965 
   2966 - DHCPv4 is now the default (as documented) rather than DHCPv6.  The default
   2967   was set to DHCPv6 to facilitate ease early development, and forgotten.
   2968 
   2969 - Corrected a segmentation violation in DHCPv4 socket processing.
   2970 
   2971 - dhclient will now fork() into the background once it binds to an
   2972   IPv6 address, or immediately if the -n flag is supplied.
   2973 
   2974 - -q is now the default behaviour on dhclient, with -d or -v enabling
   2975   non-quiet (stderr logging) mode.
   2976 
   2977 - Fix documentation of the domain-search atom (quoted, with commas).
   2978 
   2979 - Document DHCPv6 options presently in the default table.
   2980 
   2981 - Replaced ./configure shellscripting with GNU Autoconf.
   2982 
   2983 		     Changes since 3.1.0 (NEW FEATURES)
   2984 
   2985 - DHCPv6 Client and Server protocol support.  Use '-6' to run the daemons
   2986   as v6-only.  Use '-4' to run the daemons as v4-only (default.  There is
   2987   no support currently for both.
   2988 
   2989 - Server support for multiple IA_NA options, containing at most one
   2990   IAADDR option.
   2991 
   2992 - Client support for one IA_NA option, containing any number of IAADDR
   2993   options.
   2994 
   2995 - Server support for the DHCPv6 Information-request message.
   2996 
   2997 - Inappropriate unicast DHCPv6 messages sent to the server are now
   2998   discarded, and this has rearchitected the IO system slightly.
   2999 
   3000 - The DHCPv6 server DUID defaults to type 1, is persistently stored in
   3001   the leases database, and can be over-ridden (either completely, or by
   3002   specifying type 1 or type 2).
   3003 
   3004 - The server only uses Rapid-Commit if it has been configured with the
   3005   Rapid-Commit option and the client requests it.
   3006 
   3007 - DDNS support. We now update AAAA records in the same place we would
   3008   update A records, if we have an IPv6 address. We also generate IP6.ARPA
   3009   style names for PTR records if we're dealing with an IPv6 address.  Both
   3010   A and AAAA updates are done using the same 'fqdn.' virtual option space
   3011   (although the DHCPv4 FQDN and DHCPv6 FQDN options are formatted
   3012   differently, they both use the same code here).
   3013 
   3014 - The Linux dhclient-script attempts to set and remove assigned addresses,
   3015   and to configure /etc/resolv.conf from nameserver and domain name
   3016   configurations.  It can be extended to configure other parameters.
   3017 
   3018 - Initial DHCPv6 lease support.
   3019 
   3020 - The IO system now tracks all local IP addresses, so that the DHCP
   3021   applications (particularly the dhcrelay) can discern between what frames
   3022   were transmitted to it, and what frames are being carried through it which
   3023   it should not intercept.
   3024 
   3025 			Changes since 3.1.0 (Maintenance)
   3026 
   3027 - A bug was repaired where MAC Address Affinity for virgin leases always
   3028   mapped to the primary.  Virgin leases now have an interleaved preference
   3029   between primary and secondary.
   3030 
   3031 - A bug was repaired where MAC Address Affinity for clients with no client
   3032   identifier was sometimes mishashed to the peer.  Load balancing during
   3033   runtime and pool rebalancing were opposing.
   3034 
   3035 - An assertion in lease counting relating to reserved leases was repaired.
   3036 
   3037 - The subnet-mask option inclusion now conforms with RFC2132 section 3.3;
   3038   it will only appear prior to the routers option if it is present on the
   3039   Parameter-Request-List.  The subnet-mask option will also only be
   3040   included by default (if it is not on the PRL) in response to DISCOVER
   3041   or REQUEST messages.
   3042 
   3043 - The FQDN option is only supplied if the client supplied an FQDN option or
   3044   if the FQDN option was explicitly requested on the PRL.
   3045 
   3046 - Dynamic BOOTP leases are now load balanced in failover.
   3047 
   3048 			Changes since 3.1.0rc1
   3049 
   3050 - The parse warning that 'deny dynamic bootp;' must be configured for
   3051   failover protected subnets was removed.
   3052 
   3053 			Changes since 3.1.0b2
   3054 
   3055 - Failover rebalance events no longer play ping pong with round errors
   3056   (moving leases between free and back to backup where there are an
   3057   odd number of leases).
   3058 
   3059 - The 'pool' log line has been split into two messages, one before the
   3060   rebalance run, and one after.
   3061 
   3062 - Any queued BNDACKs are transmitted before transmitting new BNDUPDs.
   3063   This enforces the correct sequence of events for the remote server
   3064   processing these messages.
   3065 
   3066 			Changes since 3.1.0b1
   3067 
   3068 - Fixed a bug that caused OMAPI clients to freeze when opening lease
   3069   objects.
   3070 
   3071 - A new server config option "fqdn-reply" specifies whether the server
   3072   should send out option 81 (FQDN).  Defaults to "on".  If set to "off",
   3073   the FQDN option is not sent, even if the client requested it.  This is
   3074   needed because some clients misbehave otherwise.  Thanks to Christof Chen
   3075   at Allianz.
   3076 
   3077 - Allow trace output files (-tf option) to be overwritten, rather than
   3078   crashing dhcpd if the file already exists
   3079 
   3080 - A bug was fixed that caused dhcpd to segfault if a pool was declared
   3081   outside the scope of a subnet in dhcpd.conf.
   3082 
   3083 - Some uninitialized values were repaired in dhcpleasequery.c that
   3084   caused the server to abort.
   3085 
   3086 - A new server config option, 'do-reverse-updates', has been added
   3087   which causes the server to abstain from performing updates on PTR
   3088   records.  Thanks to a patch from Christof Chen at Allianz.
   3089 
   3090 - A bug was repaired in subencapsulation support, where spaces separated
   3091   by empty spaces would not get included.
   3092 
   3093 - A bug in dhclient was repaired which caused it to send parameter request
   3094   lists of 55 bytes in length no matter how long the declared PRL was.
   3095 
   3096 - 'dhcp.c(3953): non-null pointer' has been repaired.  This fixes a flaw
   3097   wherein the DHCPv4 server may ignore a configured server-identifier.
   3098 
   3099 - A flaw in failover startup sequences was repaired that sometimes left
   3100   the primary DHCP server's pool rebalance schedules unscheduled.
   3101 
   3102 - Corrected a flaw that broke encapsulated spaces included due to presence
   3103   on the parameter request list.
   3104 
   3105 			Changes since 3.1.0a3
   3106 
   3107 - Some spelling fixes.
   3108 
   3109 			Changes since 3.1.0a2
   3110 
   3111 - A bug was fixed where attempting to permit leasequeries results in a
   3112   fatal internal error, "Unable to find server option 49".
   3113 
   3114 - A bug was fixed in dhclient rendering the textual output form of the
   3115   domain-search option syntax.
   3116 
   3117 			Changes since 3.1.0a1
   3118 
   3119 - A bug in the FQDN universe that added FQDN codes to the NWIP universe's
   3120   hash table was repaired.
   3121 
   3122 - The servers now try harder to transmit pending binding updates when
   3123   entering normal state.
   3124 
   3125 - UPDREQ/UPDREQALL handling was optimized - it no longer dequeues and
   3126   requeues all pending updates.  This should reduce the number of spurious
   3127   'xid mismatch' log messages.
   3128 
   3129 - An option definition referencing leak was fixed, which resulted in early
   3130   termination of dhclient upon the renewal event.
   3131 
   3132 - Some default hash table sizes were tweaked, some upwards, some downwards.
   3133   3.1.0a1's tables resulted in a reduction in default server memory use.
   3134   The new selected values provide more of a zero sum (increasing the size
   3135   of tables likely to be populated, decreasing the size of tables unlikely).
   3136 
   3137 - Lease structures appear in three separate hashes: by IP address, by UID,
   3138   and by hardware address.  One type of table was used for all three, and
   3139   improvements to IP address hashing were applied to all three (so UID and
   3140   hardware addresses were treated like 4-byte integers).  There are now two
   3141   types of tables, and the uid/hw hashes use functions more appropriate
   3142   to their needs.
   3143 
   3144 - The max-lease-misbalance percentage no longer causes scheduled rebalance
   3145   runs to be skipped: it still governs the schedule, but every scheduled
   3146   run will attempt balance.
   3147 
   3148 - A segfault bug in recursive encapsulation support has been corrected.
   3149 
   3150 			Changes since 3.0 (New Features)
   3151 
   3152 - A workaround for certain STSN servers that send a mangled domain-name
   3153   option was introduced for dhclient.  The client will now accept corrupted
   3154   server responses, if they contain a valid DHCP_MESSAGE_TYPE (OFFER, ACK,
   3155   or NAK).  The server will continue to not accept corrupt client packets.
   3156 
   3157 - Support for 'reserved' (pseudo-static) and BOOTP leases via failover
   3158   was introduced.
   3159 
   3160 - Support for adding, removing, and managing class and subclass statements
   3161   via OMAPI.
   3162 
   3163 - The failover implementation was updated to comply with revision 12 of
   3164   the protocol draft.
   3165 
   3166 - 'make install' now creates the initial zero-length dhcpd.leases file if
   3167   one does not already exist on the system.
   3168 
   3169 - RFC3942 compliance, site-local option spaces start at 224 now, not 128.
   3170 
   3171 - The Load Balance Algorithm was misimplemented.  The current implementation
   3172   matches RFC 3074.
   3173 
   3174 - lcase() and ucase() configuration expressions have been added which adjust
   3175   their arguments from upper to lower and lower to upper cases respectively.
   3176   Thanks to a patch from Albert Herranz.
   3177 
   3178 - The dhclient 'reject ...;' statement, which rejects leases given by named
   3179   server-identifiers, now permits address ranges to be specified in CIDR
   3180   notation.  Thanks to a patch from David Boyce.
   3181 
   3182 - The subnet-mask option is now supplied by default, but at lowest
   3183   priority.  This helps a small minority of clients that provide parameter
   3184   request lists, but do not list the subnet-mask option because they were
   3185   designed to interoperate with a server that behaves in this manner.
   3186 
   3187 - The FQDN option is similarly supplied even if it does not appear on the
   3188   parameter request list, but not to the exclusion of options that do
   3189   appear at the parameter request list.  Up until now it had ultimate
   3190   priority over the client's parameter request list.
   3191 
   3192 - Varying option space code and length bit widths (8/16/32) are now
   3193   supported.  This is a milestone in achieving RFC 3925 "VIVSO" and
   3194   DHCPv6 support.
   3195 
   3196 - A new common (server or client) option, 'db-time-format local;', has
   3197   been added which prints the local time in /var/db/dhcpd.leases rather
   3198   than UTC.  Thanks to a patch from Ken Lalonde.
   3199 
   3200 - Some patches to improve DHCP Server startup speed from Andrew Matheson
   3201   have been incorporated.
   3202 
   3203 - Failover pairs now implement 'MAC Affinity' on leases moving from the
   3204   active to free states.  Leases that belonged to the failover secondary
   3205   are moved to BACKUP state rather than FREE upon exiting EXPIRED state.
   3206   If lease rebalancing must move leases, it tries first to move leases
   3207   that belong to the peer in need.
   3208 
   3209 - The server no longer sends POOLREQ messages unless the pool is severely
   3210   misbalanced in the peer's favor (see 'man dhcpd.conf' for more details).
   3211 
   3212 - Pool rebalance events no longer happen upon successfully allocating a
   3213   lease.  Instead, they happen on a schedule.  See 'man dhcpd.conf' for the
   3214   min-balance and max-balance statements for more information.
   3215 
   3216 - The DHCP Relay Agent Information Option / Link Selection Sub-Option
   3217   is now supported.  (See RFC3527 for details).
   3218 
   3219 - A new DDNS related server option, update-conflict-detection, has been
   3220   added.  If this option is enabled, dhcpd will perform normal DHCID
   3221   conflict resolution (the default).  If this option is disabled, it will
   3222   instead trust the assigned name implicitly (removing any other bindings
   3223   on that name).  This option has not been made available in dhclient.
   3224 
   3225 - In those cases where the DHCP software manufactures an IP header (to
   3226   transmit via bpf, lpf, etc), the IP TTL the software selects has been
   3227   increased from 16 to 128.  This is intended to match Microsoft Windows
   3228   DHCP Client behaviour, to increase compatibility.
   3229 
   3230 - 'ignore client-updates;' now has behaviour that is different from
   3231   'deny client-updates;'.  The client's request is not truly ignored,
   3232   rather it is encouraged.  Should this value be configured, the server
   3233   updates DNS as though client-updates were set to 'deny'.  That is, it
   3234   enters into DNS whatever it is configured to do already, provided it is
   3235   configured to.  Then it sends a response to the client that lets the
   3236   client believe it is performing client updates (which it will), probably
   3237   for a different name.  In essence, this lets the client do as it will,
   3238   ignoring this aspect of their request.
   3239 
   3240 - Support for compressed 'domain name list' style DHCP option contents, and
   3241   in particular the domain search option (#119) was added.
   3242 
   3243 - The DHCP LEASEQUERY protocol as defined in RFC4388 is now implemented.
   3244   LEASEQUERY lets you query the DHCP server for information about a lease,
   3245   using either an IP address, MAC address, or client identifier.  Thanks
   3246   to a patch from Justin Haddad.
   3247 
   3248 - DHCPD is now RFC2131 section 4.1 compliant (broadcast to all-ones ip and
   3249   ethernet mac address) on the SCO platform specifically without any strange
   3250   ifconfig hacks.  Many thanks go to the Kroger Co. for donating the
   3251   hardware and funding the development.
   3252 
   3253 - A new common configuration executable statement, execute(), has been
   3254   added.  This permits dhcpd or dhclient to execute a named external
   3255   program with command line arguments specified from other configuration
   3256   language.  Thanks to a patch written by Mattias Ronnblom, gotten to us
   3257   via Robin Breathe.
   3258 
   3259 - A new dhcp server option 'adaptive-lease-time-threshold' has been added
   3260   which causes the server to substantially reduce lease-times if there are
   3261   few (configured percentage) remaining leases.  Thanks to a patch submitted
   3262   from Christof Chen.
   3263 
   3264 - Encapsulated option spaces within encapsulated option spaces is now
   3265   formally supported.
   3266 
   3267 			Changes since 3.0.6rc1
   3268 
   3269 - supersede_lease() now requeues leases in their respective hardware
   3270   address hash bucket.  This mirrors client identifier behaviour.
   3271 
   3272 			Changes since 3.0.5
   3273 
   3274 - Assorted fixes for broken network devices:  Packet length is now
   3275   determined from the IP header length field to finally calculate the
   3276   UDP payload length, because some NIC drivers return more data than
   3277   they actually received.
   3278 
   3279 - UDP packets are now stored in aligned data structures.
   3280 
   3281 - A logic error in omapi interface code was repaired that might result in
   3282   incorrectly indicating 'up' state when any flags were set, rather than
   3283   specifically the INTERFACE_REQUESTED flag.  Thanks to a patch from
   3284   Jochen Voss which got to us via Andrew Pollock at Debian.
   3285 
   3286 - A reference leak on binding scopes set by ddns updates was repaired.
   3287 
   3288 - A memory leak in the minires_nsendsigned() function call was repaired.
   3289   Effectively, this leaked ~176 bytes per DDNS update.
   3290 
   3291 - In the case where an "L2" DHCP Relay Agent (one that does not set giaddr)
   3292   was directly attached to the same broadcast domain as the DHCP server,
   3293   the RFC3046 relay agent information option was not being returned to the
   3294   relay in the server's replies.  This was fixed; the dhcp server no longer
   3295   requires the giaddr to reply with relay agent information.  Note that
   3296   this also improves compatibility with L2 devices that "intercept" DHCP
   3297   packets and expect relay agent information even in unicast (renewal)
   3298   replies.  Thanks to a patch from Pekka Silvonen.
   3299 
   3300 - A bug was fixed where the BOOTP header 'sname' field had a value, the
   3301   copy written to persistent storage was actually the contents of the
   3302   'file' field.
   3303 
   3304 - A bug was fixed where the nwip virtual option space was referencing
   3305   the fqdn option's virtual option space's option cache.
   3306 
   3307 - Timestamp parsing errors that indicated missing "minutes" fields rather
   3308   than the actually missing "seconds" fields have been repaired thanks to
   3309   a patch from Kevin Steves.
   3310 
   3311 - A grammar error in the dhclient.8 manpage was repaired thanks to a patch
   3312   from Chris Wagner.
   3313 
   3314 - Several spelling typos were repaired, and some cross-references to other
   3315   relevant documents were included in the manpages, thanks to a patch
   3316   by Andrew Pollock which got to us via Tomas Pospisek.
   3317 
   3318 - Some bugs were fixed in the 'emergency relay agent options hologram'
   3319   which is used to retain relay agent option contents from when the
   3320   client was in INIT or REBIND states.  This should solve problems where
   3321   relay agent options were not echoed from the server, even when giaddr
   3322   was set.
   3323 
   3324 - dhclient now closes its descriptor to dhclient.leases prior to executing
   3325   dhclient-script.  Thanks to a patch from Tomas Pospisek.
   3326 
   3327 - The server's "by client-id" and "by hardware address" hash table lists
   3328   are now sorted according to the preference to re-allocate that lease to
   3329   returning clients.  This should eliminate pool starvation problems
   3330   arising when "INIT" clients were given new leases rather than presently
   3331   active ones.
   3332 
   3333 			Changes since 3.0.5rc1
   3334 
   3335 - A bug was repaired in fixes to the dhclient, which sought to run the
   3336   dhclient-script with the 'EXPIRE' state should it receive a NAK in
   3337   response to a REQUEST.  The client now iterates the PREINIT state
   3338   after the EXPIRE state, so that interfaces that might be configured
   3339   'down' can be brought back 'up' and initialized.
   3340 
   3341 - DHCPINFORM handling for clients that properly set ciaddr and come to the
   3342   server via a relay aget has been repaired.
   3343 
   3344 			Changes since 3.0.4
   3345 
   3346 - A warning that host statements declared within subnet or shared-network
   3347   scopes are actually global has been added.
   3348 
   3349 - The default minimum lease time (if min-lease-time was not specified)
   3350   was raised from 0 to 300.  0 is not thought to be sensible, and is
   3351   known to be damaging.
   3352 
   3353 - Added additional fatal error sanity checks surrounding lease binding
   3354   state count calculations (free/active counts used for failover pool
   3355   balancing).
   3356 
   3357 - Some time value size fixes in 3.0.4 brought on from FreeBSD /usr/ports were
   3358   misapplied to server values rather than client values.  The server no longer
   3359   advertises 8-byte lease-time options when on 64-bit platforms.
   3360 
   3361 - A bug where leases not in ACTIVE state would get billed to billed classes
   3362   (classes with lease limitations) was fixed.  Non-active leases OFFERed
   3363   to clients are no longer billed (but billing is checked before offering).
   3364 
   3365 - The dhcpd.conf.5 manpage was updated in regard to the ddns-domainname
   3366   configuration option - the default configuration and results should be
   3367   more clear now.
   3368 
   3369 - If the dhclient were to receive a DHCPNAK while it was in the RENEW
   3370   state (and consequently, had an active, 'bound' address and related
   3371   configuration options), it would fail to 'tear down' this information
   3372   before proceeding into INIT state.  dhclient now iterates the dhclient-
   3373   script with the 'EXPIRE' action to cause these teardowns prior to entering
   3374   INIT state.  Thanks to a patch from Chris Zimmerman.
   3375 
   3376 - The omapi.1 manpage had some formatting errors repaired thanks to a patch
   3377   from Yoshihiko Sarumaru.
   3378 
   3379 - A few lines of code that were failover-specific were moved within
   3380   #if defined() clauses so that compilation without failover could be
   3381   made possible.
   3382 
   3383 - The log message emitted when the 'leased-address' value was not available
   3384   in dhcpd.conf "executable statements" has been updated to be more helpful.
   3385   Manpage information for this value has also been updated.
   3386 
   3387 - Abandoned or dissociated (err condition) leases now remove any related
   3388   dynamic dns bindings.  Thanks to a patch from Patrick Schoo.
   3389 
   3390 - Attempting to write a new lease file to replace a corrupt (due to
   3391   encountering non-retryable errors during writing) lease file should
   3392   no longer result in an infinite recursion.
   3393 
   3394 - Host declaration hardware addresses and client identifiers may only be
   3395   configured once.  dhcpd will now fail to load config files that specify
   3396   multiple identifiers (previous versions would silently over-ride the
   3397   value with the later configured value).
   3398 
   3399 - Several option codes that have been allocated since our last release
   3400   have been named and documented.
   3401 
   3402 - Option names of the form "unknown-123" have been removed from the in-
   3403   memory hash tables.  In order to support options of these names that
   3404   may appear in dhclient.leases or similar in previous versions, the
   3405   parser will now find the new option code definition, or mock up a
   3406   generic option code definition.  This should result in a smooth
   3407   transition from one name to the other, as the new name is used to
   3408   write new output.
   3409 
   3410 			Changes since 3.0.4rc1
   3411 
   3412 - The dhcp-options.5 manpage was updated to correct indentation errors
   3413   thanks to a patch from Jean Delvare.
   3414 
   3415 			Changes since 3.0.4b3
   3416 
   3417 - Some manual pages were clarified pursuant to discussion on the dhcp-server
   3418   mailing list.
   3419 
   3420 			Changes since 3.0.4b2
   3421 
   3422 - Null-termination sensing for certain clients that unfortunately require
   3423   it in DHCPINFORM processing was repaired.
   3424 
   3425 - The host-name option and a few others were moved from "X" format to "t"
   3426   format to be compatible with new NULL handling functions.
   3427 
   3428 - DHCPINFORM processing is a little more careful about return addressing
   3429   its responses, or if responding via a relay.  The INFORM related
   3430   messages also log the 'effective client ip address' rather than the
   3431   client's supplied ciaddr (since some clients produce null ciaddrs).
   3432 
   3433 - The server was inappropriately sending leases to the RESET state in the
   3434   event that multiple active leases were found to match a singly-identified
   3435   client.  This was changed to RELEASED (by accepting a different, ACTIVE
   3436   binding, the client is implicitly releasing its lease).  This repairs a
   3437   bug wherein secondary servers in failover pairs detecting this condition
   3438   move leases to RESET, and primaries refuse to accept that state
   3439   transition (properly).
   3440 
   3441 - The memset-after-dmalloc() changes made in 3.0.4b1 have been backed out.
   3442 
   3443 			Changes since 3.0.4b1
   3444 
   3445 - Command line parsing in omshell was repaired - it no longer closes
   3446   STDIN after reading one line.
   3447 
   3448 - The resolver library no longer closes the /etc/resolv.conf file
   3449   descriptor it opened twice.
   3450 
   3451 - Changes to trailing NULL removal in 't' option-atoms has been rethought,
   3452   it now includes 'd' (domain name) types, and tries hard not to rewind an
   3453   option beyond the start of the text field it is un-terminating.
   3454 
   3455 			Changes since 3.0.3
   3456 
   3457 - A DDNS update handling function was misusing the DNS error codes, rather
   3458   than the internal generic result enumeration.  The result is a confusing
   3459   syslog line, logging the wrong condition.
   3460 
   3461 - The DHCP Server was not checking pool balance in the case where it brought
   3462   a non-ACTIVE lease out of storage for a client that was returning to use
   3463   a lease it once had long ago, and had since expired.
   3464 
   3465 - Failover peers no longer bother to look for free leases to allocate when
   3466   they already found the client's ACTIVE lease.  DISCOVERs are load balanced
   3467   whether freely-allocated or not, unless the server doubts the peer has
   3468   leases to allocate.
   3469 
   3470 - Fixed a bug in dhcrelay agent addition code that suppressed trailing
   3471   PAD options - it was suppressing only one trailing PAD option, rather
   3472   than the entire block of them.
   3473 
   3474 ! Fixed some unlikely overlapping-region memcpy() bugs in dhcrelay agent
   3475   option addition and stripping code.  Added a few sanity checks.  Although
   3476   highly improbable, due to requiring the reception of a DHCP datagram well
   3477   in excess of all known to be used physical MTU limitations, it is possible
   3478   this may have been used in a stack overflow security vulnerability.  Thanks
   3479   to a patch from infamous42md.
   3480 
   3481 ! Added some sanity checks to OMAPI connection/authentication code.
   3482   Although highly improbable, due to having to deliver in excess of 2^32
   3483   bytes of data via the OMAPI channel, not to mention requiring dhcpd to
   3484   be able to malloc() a memory region 2^32 bytes in size, it was possible
   3485   this might have resulted in a heap overflow security vulnerability.
   3486   Thanks to a patch from infamous42md.
   3487 
   3488 - dmalloc() memset()'s the non-debug (data) portion of the allocated
   3489   memory to zero.  Code that memset()'s the result returned by dmalloc() to
   3490   zero is redundant.  These redundancies were removed.
   3491 
   3492 - Some type declaration corrections to u_int16_t were made in common/tr.c
   3493   (Token Ring support) thanks to a patch from Jason Vas Dias at Red Hat.
   3494 
   3495 - A failover bug that was allowing leases that EXPIRED or were RELEASED
   3496   where tsfp and tstp are identical timestamps to languish in these
   3497   transitional states has been repaired.  As a side effect, lease
   3498   databases should be kept more consistent overall, not just for these
   3499   transitional states.
   3500 
   3501 - If the lease db is deleted out from under the daemon, and it moves to rewrite
   3502   the db, it will go ahead with the operation and move the new db into place
   3503   once it detects the old db does not exist.
   3504 
   3505 - dhclient now ignores IRDA, SIT, and IEEE1394 network interfaces, as it
   3506   is either nonsensical or (in the case of IEEE1394) is not known to support
   3507   these interfaces.  Thanks to Marius Gedminas and Andrew Pollock of Debian.
   3508 
   3509 - Some previously undocumented reasons for dhclient-script invoking has
   3510   been documented in the dhclient-script.8 manpage.
   3511 
   3512 - Failover potential expiry calculations (TSTP) have been corrected.  Results
   3513   should be substantially more consistent, and proper given the constraints.
   3514 
   3515 - Adjusted lease state validation checks in potential-conflict, to
   3516   account for possible clock skew similarly to normal state, and several
   3517   previously illegal transitions were made legal (ex: active->released).
   3518 
   3519 - An impossible sanity check was removed from omapi/buffer.c, thanks to a
   3520   patch from 'infamous42md'.
   3521 
   3522 - An OMAPI host/network byte order problem in lease time values has been
   3523   repaired.
   3524 
   3525 - Several minor bugs, largely relating to treating 8-byte time values as
   3526   4-byte entities, have been repaired after careful review of the FreeBSD
   3527   ports collection's patch set.  Thanks to the nameless entities who have
   3528   contributed to the FreeBSD ports.
   3529 
   3530 - When writing a trace file, the file is now created with permissions 0600,
   3531   to help administrators avoid accidentally publicising sensitive config
   3532   data.
   3533 
   3534 - The calculation of the maximum size of DHCP packets no longer includes
   3535   Ethernet framing overhead.  The result is that the 'Maximum Message
   3536   Size' option advertised by clients, or the default value 576, is no
   3537   longer reduced by 14 bytes, and instead directly reflects the IP level
   3538   MTU (and the default, minimum allowed IP MTU of 576).
   3539 
   3540 - The special status of RELEASED/EXPIRED/RESET leases when a server
   3541   is operating in partner-down was fixed.  It no longer requires a
   3542   lease be twice the MCLT beyond STOS to 'reallocate', and the expiry
   3543   event to turn these into FREE leases without peer acknowledgement
   3544   (after STOS+MCLT) has been repaired.
   3545 
   3546 - Compilation on older Solaris systems (lacking /usr/include/sys/int_types.h)
   3547   has been repaired.
   3548 
   3549 - "append"ing a string onto the end of a "t" type option (such as the
   3550   domain-name field) that had been improperly NULL-terminated by the
   3551   DHCP server will no longer result in a truncated string containing
   3552   only the option from the server, and not the expected appended value.
   3553   Thanks to a patch from Jason Vas Dias at Red Hat.
   3554 
   3555 - File handlers on configuration state (config files and lease dbs) should
   3556   be treated consistently, regardless of whether TRACING is defined or not.
   3557 
   3558 - The Linux build environment has had some minor improvements - better
   3559   sensing of 64-bit pointer sizes (only used for establishing an icmp_id),
   3560   and corrections to #if operators regarding LINUX_MAJOR should it ever
   3561   move to 3.[01].x.
   3562 
   3563 - The server now tries harder to survive the condition where it is unable
   3564   to open a new lease file to rewrite the lease state database.
   3565 
   3566 			Changes since 3.0.3b3
   3567 
   3568 - dhclient.conf documentation for interface {} was updated to reflect recent
   3569   discussion on the dhcp-hackers mailing list.
   3570 
   3571 - In response to reports that the software does not compile on GCC 4.0.0,
   3572   -Werror was removed from Makefile.conf for all platforms that used it.
   3573   We will address the true problem in a future release; this is a temporary
   3574   workaround.
   3575 
   3576 			Changes since 3.0.3b2
   3577 
   3578 - An error in code changes introduced in 3.0.3b2 was corrected, which caused
   3579   static BOOTP clients to receive random addresses.
   3580 
   3581 			Changes since 3.0.3b1
   3582 
   3583 - A bug was fixed in BOOTPREQUEST handling code wherein stale references to
   3584   host records would be left behind on leases that were not allocated to the
   3585   client currently booting (eg in the case where the host was denied booting).
   3586 
   3587 - The dhcpd.conf.5 manpage was updated to be more clear in regards to
   3588   multiple host declarations (thanks to Vincent McIntyre).  'Interim' style
   3589   dynamic updates were also retouched.
   3590 
   3591 			Changes since 3.0.2
   3592 
   3593 - A bug was fixed where a server might load balance a DHCP REQUEST to its
   3594   peer after already choosing not to load balance the preceding DISCOVER.
   3595   The peer cannot allocate the originating server's lease.
   3596 
   3597 - In the case where a secondary server lost its stable storage while the
   3598   primary was still in communications-interrupted, and came back online,
   3599   the lease databases would not be fully transferred to the secondary.
   3600   This was due to the secondary errantly sending an extra UPDREQ message
   3601   when the primary made its state transition to PARTNER-DOWN known.
   3602 
   3603 - The package will now compile cleanly in gcc 3.3 and 3.4.  As a side effect,
   3604   lease structures will be 9 bytes smaller on all platforms.  Thanks to
   3605   Jason Vas Dias at Red Hat.
   3606 
   3607 - Interface discovery code in DISCOVER_UNCONFIGURED mode is now
   3608   properly restricted to only detecting broadcast interfaces.  Thanks
   3609   to a patch from Jason Vas Dias at Red Hat.
   3610 
   3611 - decode_udp_ip_header was changed so that the IP address was copied out
   3612   to a variable, rather than referenced by a pointer.  This enforces 4-byte
   3613   alignment of the 32-bit IP address value.  Thanks to a patch from Dr.
   3614   Peter Poeml.
   3615 
   3616 - An incorrect log message was corrected thanks to a patch from
   3617   Dr. Peter Poeml.
   3618 
   3619 - A bug in DDNS was repaired, where if the server's first DDNS action was
   3620   a DDNS removal rather than a DDNS update, the resolver library's
   3621   retransmit timer and retry timer was set to the default, implying a
   3622   15 second timeout interval.  Which is a little excessive in a synchronous,
   3623   single-threaded system.  In all cases, ISC DHCP should now hold fast to
   3624   a 1-second timeout, trying only once.
   3625 
   3626 - The siaddr field was being improperly set to the server-identifier when
   3627   responding to DHCP messages.  RFC2131 clarified the siaddr field as
   3628   meaning the 'next server in the bootstrap process', eg a tftp server.
   3629   The siaddr field is now left zeroed unless next-server is configured.
   3630 
   3631 - mockup_lease() could have returned in an error condition (or in the
   3632   condition where no fixed-address was found matching the shared
   3633   network) with stale references to a host record.  This is probably not
   3634   a memory leak since host records generally never die anyway.
   3635 
   3636 - A bug was repaired where failover servers would let stale client identifiers
   3637   persist on leases that were reallocated to new clients not sending an id.
   3638 
   3639 - Binding scopes ("set var = value;") are now removed from leases allocated
   3640   by failover peers if the lease had expired.  This should help reduce the
   3641   number of stale binding scopes on leases.
   3642 
   3643 - A small memory leak was closed involving client identifiers larger than
   3644   7 bytes, and failover.
   3645 
   3646 - Configuring a subnet in dhcpd.conf with a subnet mask of 32 bits might
   3647   cause an internal function to overflow heap.  Thanks to Jason Vas Dias
   3648   at Red Hat.
   3649 
   3650 - Some inconsistencies in treating numbers that the lexer parsed as 'NUMBER'
   3651   or 'NUMBER_OR_NAME' was repaired.  Hexadecimal parsing is affected, and
   3652   should work better.
   3653 
   3654 - In several cases, parse warnings were being issued before the lexical
   3655   token had been advanced to the token whose value was causing an error...
   3656   causing parse warnings to claim the problem is on the wrong token.
   3657 
   3658 - Host declarations matching on client identifier for dynamic leases will
   3659   no longer match fixed-address host declarations (this is now identical
   3660   to behaviour for host records matching on hardware address).
   3661 
   3662 			Changes since 3.0.2rc3
   3663 
   3664 - A previously undocumented configuration directive, 'local-address',
   3665   was documented in the dhcpd.conf manpage.
   3666 
   3667 			Changes since 3.0.2rc2
   3668 
   3669 - Two variables introduced in 3.0.2b1 were used without being initialized
   3670   in the case where neither the FILE nor SNAME fields were available for
   3671   overloading.  This was repaired.
   3672 
   3673 - A heretofore believed to be impossible corner case of the option
   3674   overloading implementation turned out to be possible ("Unable to sort
   3675   overloaded options after 10 tries.").  The implementation was reworked
   3676   to consider the case of an option so large it would require more than
   3677   three chunks to fit.
   3678 
   3679 - Many other instances of variables being used without being initialized
   3680   were repaired.
   3681 
   3682 - An uninitialized variable in omapi_io_destroy() led to the discovery
   3683   that this function may result in orphaned pointers (and hence, a memory
   3684   leak).
   3685 
   3686 			Changes since 3.0.2rc1
   3687 
   3688 - allocate_lease() was rewritten to repair a bug in which the server would
   3689   try to allocate an ABANDONED lease when FREE leases were available.
   3690 
   3691 			Changes since 3.0.2b1
   3692 
   3693 - Some dhcp-eval.5 manpage formatting was repaired.
   3694 
   3695 			Changes since 3.0.1
   3696 
   3697 - A bug was fixed in the server's 'option overloading' implementation,
   3698   where options loaded into the 'file' and 'sname' packet fields were
   3699   not aligned precisely as rfc2131 dictates.
   3700 
   3701 - The FreeBSD client script was changed to support the case where a domain
   3702   name was not provided by the server.
   3703 
   3704 - A memory leak in 'omshell' per each command line parsed was
   3705   repaired, thanks to a patch from Jarkko Torppa.
   3706 
   3707 - Log functions writing to stderr were adjusted to use the STDERR_FILENO
   3708   system definition rather than '2'.  This is a no-op for 90% of platforms.
   3709 
   3710 - One call to trace_write_packet_iov() counted the number of io vectors
   3711   incorrectly, causing inconsistent tracefiles.  This was fixed.
   3712 
   3713 - Some expression parse failure memory leaks were closed.
   3714 
   3715 - A host byte order problem in tracefiles was repaired.
   3716 
   3717 - Pools configured in DHCPD for failover possessing permission lists that
   3718   previously were assumed to not include dynamic bootp clients are now
   3719   a little more pessimistic.  The result is, dhcpd will nag you about just
   3720   about most pools that possess a 'allow' statement with no 'deny' that
   3721   would definitely match a dynamic bootp client.
   3722 
   3723 - The 'ddns-update-style' configuration warning bit now insists that
   3724   the configuration be globally scoped.
   3725 
   3726 - Two memory leaks in dhclient were closed thanks to a patch from Felix
   3727   Farkas.
   3728 
   3729 - Some minor but excellently pedantic documentation errors were fixed
   3730   thanks to a patch from Thomas Klausner.
   3731 
   3732 - Bugs in operator precedence in executable statements have been repaired
   3733   once again.  More legal syntaxes should be parsed legally.
   3734 
   3735 - Failing to initialize a tracefile for any reason if a tracefile was
   3736   specified is now a fatal error.  Thanks to a patch from Albert Herranz.
   3737 
   3738 - Corrected a bug in which the number of leases transferred as calculated
   3739   by the failover primary and sent to peers in POOLRESP responses may be
   3740   incorrect.  This value is not believed to be used by other failover
   3741   implementations, excepting perhaps as logged information.
   3742 
   3743 - Corrected a bug in which 'dhcp_failover_send_poolresp()' was in fact
   3744   sending POOLREQ messages instead of POOLRESP mesasges.  This message
   3745   was essentially ignored since failover secondaries effectively do not
   3746   respond to POOLREQ messages.
   3747 
   3748 - Type definitions for various bitwidths of integers in the sunos5-5
   3749   build of ISC DHCP have been fixed.  It should compile and run more
   3750   easily when built in 64-bit for this platform.
   3751 
   3752 - "allow known-clients;" is now a legal syntax, to avoid confusion.
   3753 
   3754 - If one dhcp server chooses to 'load balance' a request to its failover
   3755   peer, it first checks to see if it believes said peer has a free
   3756   lease to allocate before ignoring the DISCOVER.
   3757 
   3758 - log() was logging a work buffer, rather than the value returned by
   3759   executing the statements configured by the user.  In some cases,
   3760   the work buffer and the intended results were the same.  In some other
   3761   cases, they were not.  This was fixed thanks to a patch from Gunnar
   3762   Fjone and directconnect.no.
   3763 
   3764 - Compiler warnings for some string type conversions was fixed, thanks
   3765   to Andreas Gustafsson.
   3766 
   3767 - The netbsd build environments were simplified to one, in which
   3768   -Wconversion is not used, thanks to Andreas Gustafsson.
   3769 
   3770 - How randomness in the backoff-cutoff dhclient configuration variable
   3771   is implemented was better documented in the manpage, and the behaviour
   3772   of dhclient in REQUEST timeout handling was changed to match that of
   3773   DISCOVER timeout handling.
   3774 
   3775 - Omapi was hardened against clients that pass in null values, thanks
   3776   to a patch from Mark Jason Dominus.
   3777 
   3778 - A bug was fixed in dhclient that kept it from doing client-side
   3779   ddns updates.  Thanks to a patch from Andreas Gustafsson, which
   3780   underwent some modification after review by Jason Vas Dias.
   3781 
   3782 - Failover implementations disconnected due to the network between
   3783   them (rather than one of the two shutting down) will now try to
   3784   re-establish the failover connection every 5 seconds, rather than
   3785   to simply try once and give up until one of them is restarted.
   3786   Thanks to a patch from Ulf Ekberg from Infoblox, and field testing
   3787   by Greger V. Teigre which led to an enhancement to it.
   3788 
   3789 - A problem that kept DHCP Failover secondaries from tearing down
   3790   ddns records was repaired.  Thanks to a patch from Ulf Ekberg from
   3791   Infoblox.
   3792 
   3793 - 64bit pointer sizes are detected properly on FreeBSD now.
   3794 
   3795 - A bug was repaired where the DHCP server would leave stale references
   3796   to host records on leases it once thought about offering to certain
   3797   clients.  The result would be to apply host and 'known' scopes to the
   3798   wrong clients (possibly denying booting).  NOTE:  The 'mis-host' patch
   3799   that was being circulated as a workaround is not the way this bug was
   3800   fixed.  If you were a victim of this bug in 3.0.1, you are cautioned
   3801   to proceed carefully and see if it fixes your problem.
   3802 
   3803 - A bug was repaired in the server's DHCPINFORM handling, where it
   3804   tried to divine the client's address from the source packet and
   3805   would get it wrong.  Thanks to Anshuman Singh Rawat.
   3806 
   3807 - A log message was introduced to help illuminate the case where the
   3808   server was unable to find a lease to assign to any BOOTP client.
   3809   Thanks to Daniel Baker.
   3810 
   3811 - A minor dhcpd.conf.5 manpage error was fixed.
   3812 
   3813 			Changes since 3.0.1rc14
   3814 
   3815 - The global variable 'cur_time' was centralized and is now uniformly of a
   3816   type #defined in system-dependent headers.  It had previously been defined
   3817   in one of many places as a 32-bit value, and this causes mayhem on 64-bit
   3818   big endian systems.  It probably wasn't too healthy on little endian
   3819   systems either.
   3820 
   3821 - A printf format string error introduced in rc14 was repaired.
   3822 
   3823 - AIX system-dependent header file was altered to only define NO_SNPRINTF
   3824   if the condition used to #ifdef in vsnprintf in AIX' header files
   3825   is false.
   3826 
   3827 - The Alpha/OSF system-dependent header file was altered to define
   3828   NO_SNPRINTF on OS revisions older than 4.0G.
   3829 
   3830 - omapip/test.c had string.h added to its includes.
   3831 
   3832 			Changes since 3.0.1rc13
   3833 
   3834 ! CAN-2004-0460 - CERT VU#317350: Five stack overflow exploits were closed
   3835   in logging messages with excessively long hostnames provided by the
   3836   clients.  It is highly probable that these could have been used by
   3837   attackers to gain arbitrary root access on systems using ISC DHCP 3.0.1
   3838   release candidates 12 or 13.  Special thanks to Gregory Duchemin for
   3839   both finding and solving the problem.
   3840 
   3841 ! CAN-2004-0461 - CERT VU#654390: Once the above was closed, an opening
   3842   in log_*() functions was evidenced, on some specific platforms where
   3843   vsnprintf() was not believed to be available and calls were wrapped to
   3844   sprintf() instead.  Again, credit goes to Gregory Duchemin for finding
   3845   the problem.  Calls to snprintf() are now linked to a distribution-local
   3846   snprintf implementation, only in those cases where the architecture is
   3847   not known to provide one (see includes/cf/[arch].h).  If you experience
   3848   linking problems with snprintf/vsnprintf or 'isc_print_' functions, this
   3849   is where to look.  This vulnerability did not exist in any previously
   3850   published version of ISC DHCP.
   3851 
   3852 - Compilation on hpux 11.11 was repaired.
   3853 
   3854 - 'The cross-compile bug fix' was backed out.
   3855 
   3856 			Changes since 3.0.1rc12
   3857 
   3858 - Fixed a bug in omapi lease lookup function, to form the hardware
   3859   address for the hash lookup correctly, thanks to a patch from
   3860   Richard Hirst.
   3861 
   3862 - Fixed a bug where dhcrelay was sending relayed responses back to the
   3863   broadcast address, but with the source's unicast mac address.  Should
   3864   now conform to rfc2131 section 4.1.
   3865 
   3866 - Cross-compile bug fix; use $(AR) instead of ar.  Thanks to Morten Brorup.
   3867 
   3868 - Fixed a crash bug in dhclient where dhcpd servers that do not provide
   3869   renewal times results in an FPE.  As a side effect, dhclient can now
   3870   properly handle 0xFFFFFFFF (-1) expiry times supplied by servers.  Thanks
   3871   to a patch from Burt Silverman.
   3872 
   3873 - The 'ping timeout' debugs from rc12 were removed to -DDEBUG only,
   3874   and reformatted to correct a compilation error on Solaris platforms.
   3875 
   3876 - A patch was applied which fixes a case where leases read from the
   3877   leases database do not properly over-ride previously read leases.
   3878 
   3879 - dhcpctl.3 manpage was tweaked.
   3880 
   3881 			Changes since 3.0.1rc11
   3882 
   3883 - A patch from Steve Campbell was applied with minor modifications to
   3884   permit reverse dns PTR record updates with values containing spaces.
   3885 
   3886 - A patch from Florian Lohoff was applied with some modifications to
   3887   dhcrelay.  It now discards packets whose hop count exceeds 10 by default,
   3888   and a command-line option (-c) can be used to set this threshold.
   3889 
   3890 - A failover bug relating to identifying peers by name length instead of
   3891   by name was fixed.
   3892 
   3893 - Declaring failover configs within shared-network statements should no
   3894   longer result in error.
   3895 
   3896 - The -nw command line option to dhclient now works.
   3897 
   3898 - Thanks to a patch from Michael Richardson:
   3899 	- Some problems with long option processing have been fixed.
   3900 	- Some fixes to minires so that updates of KEY records will work.
   3901 
   3902 - contrib/ms2isc was updated by Shu-Min Chang of the Intel Corporation.
   3903   see contrib/ms2isc/readme.txt for revision notes.
   3904 
   3905 - Dhclient no longer uses shell commands to kill another instance of
   3906   itself, it sends the signal directly.  Thanks to a patch from Martin
   3907   Blapp.
   3908 
   3909 - The FreeBSD dhclient-script was changed so that a failure to write to
   3910   /etc/resolv.conf does not prematurely end the script.  This keeps dhclient
   3911   from looping infinitely when this is the case.  Thanks to a patch from
   3912   Martin Blapp.
   3913 
   3914 - A patch from Bill Stephens was applied which resolves a problem with lease
   3915   expiry times in failover configurations.
   3916 
   3917 - A memory leak in configuration parsing was closed thanks to a patch from
   3918   Steve G.
   3919 
   3920 - The function which discovers interfaces will now skip non-broadcast or
   3921   point-to-point interfaces, thanks to a patch from David Brownlee.
   3922 
   3923 - Options not yet known by the dhcpd or dhclient have had their names
   3924   changed such that they do not contain # symbols, in case they should ever
   3925   appear in a lease file.  An option that might have been named "#144" is
   3926   now "unknown-144".
   3927 
   3928 - Another patch from Bill Stephens which allows the ping-check timeout to
   3929   be configured as 'ping-timeout'.  Defaults to 1.
   3930 
   3931 			Changes since 3.0.1rc10
   3932 
   3933 - Potential buffer overflows in minires repaired.
   3934 
   3935 - A change to the linux client script to use /bin/bash, since /bin/sh may
   3936   not be bash.
   3937 
   3938 - Some missing va_end cleanups thanks to a patch from Thomas Klausner.
   3939 
   3940 - A correction of boolean parsing syntax validation - some illegal syntaxes
   3941   that worked before are now detected and produce errs, some legal syntaxes
   3942   that errored before will now work properly.
   3943 
   3944 - Some search-and-replace errors that caused some options to change their
   3945   names was repaired.
   3946 
   3947 - Shu-min Chang of the Intel corporation has contributed a perl script and
   3948   module that converts the MS NT4 DHCP configuration to a ISC DHCP3
   3949   configuration file.
   3950 
   3951 - Applied the remainder of the dhcpctl memory leak patch provided by Bill
   3952   Squier at ReefEdge, Inc.  (groo (a] reefedge.com).
   3953 
   3954 - Missing non-optional failover peer configurations will now result in a soft
   3955   error rather than a null dereference.
   3956 
   3957 			Changes since 3.0.1rc9
   3958 
   3959 - A format string was corrected to fix compiler warnings.
   3960 
   3961 - A number of spelling corrections were made in the man pages.
   3962 
   3963 - The dhclient.conf.5 man page was changed to refer to do-forward-updates
   3964   rather than a configuration option that doesn't exist.
   3965 
   3966 - A FreeBSD-specific bug in the interface removal handling was fixed.
   3967 
   3968 - A Linux-specific Token Ring detection problem was fixed.
   3969 
   3970 - Hashes removed from as-yet-unknown agent options, having those options
   3971   appear in reality before we know about them will no longer produce
   3972   self-corrupting lease databases.
   3973 
   3974 - dhclient will use the proper port numbers now when using the -g option.
   3975 
   3976 - A order-of-operations bug with 2 match clauses in 1 class statement is
   3977   fixed thanks to a patch from Andrew Matheson.
   3978 
   3979 - Compilation problems on Solaris were fixed.
   3980 
   3981 - Compilation problems when built with DEBUG or DEBUG_PACKET were repaired.
   3982 
   3983 - A fix to the dhcp ack process which makes certain group options will be
   3984   included in the first DHCPOFFER message was made thanks to a patch from
   3985   Ling Gou.
   3986 
   3987 - A few memory leaks were repaired thanks to patches from Bill Squier at
   3988   ReefEdge, Inc.  (groo (a] reefedge.com).
   3989 
   3990 - A fix for shared-networks that sometimes give clients options for the
   3991   wrong subnets (in particular, 'option routers') was applied, thanks to
   3992   Ted Lemon for the patch.
   3993 
   3994 - Omshell's handling of dotted octets as values was changed such that dots
   3995   one after the other produce zero values in the integer string.
   3996 
   3997 			Changes since 3.0.1rc8
   3998 
   3999 - Fix a format string vulnerability in the server that could lead to a
   4000   remote root compromise (discovered by NGSEC Research Team, www.ngsec.com).
   4001 
   4002 - Add additional support for NetBSD/sparc64.
   4003 
   4004 - Fix a bug in the command-line parsing of the client.  Also, resolve
   4005   a memory leak.
   4006 
   4007 - Add better support for shells other than bash in the Linux client
   4008   script.
   4009 
   4010 - Various build fixes for modern versions of FreeBSD and Linux.
   4011 
   4012 - Fix a bad bounds check when printing binding state names.
   4013 
   4014 - Clarify documentation about fixed-address and multiple addresses.
   4015 
   4016 - Fix a typo in the authoritative error message.
   4017 
   4018 - Make a log entry when we can't write a billing class.
   4019 
   4020 - Use conversion targets that are the right size on all architectures.
   4021 
   4022 - Increment the hop count when relaying.
   4023 
   4024 - Log a message when lease state is changed through OMAPI.
   4025 
   4026 - Don't rerun the shared_network when evaluating the pool.
   4027 
   4028 - Fix a reversed test in the parser.
   4029 
   4030 - Change the type of rbuf_max.
   4031 
   4032 - Make FTS_LAST a manifest constant to quiet warnings.
   4033 
   4034 			Changes since 3.0.1rc7
   4035 
   4036 - Fix two compiler warnings that are generated when compiling on Solaris
   4037   with gcc.   These stop the build, even though they weren't actually
   4038   errors, because we prefer that our builds generate no warnings.
   4039 
   4040 			Changes since 3.0.1rc6
   4041 
   4042 - Don't allow a lease that's in the EXPIRED, RELEASED or RESET state
   4043   to be renewed.
   4044 
   4045 - Implement lease stealing for cases where the primary has fewer leases
   4046   than the secondary, as called for by the standard.
   4047 
   4048 - Add a fudge factor to the lease expiry acceptance code, (suggested
   4049   by Kevin Miller of CMU).
   4050 
   4051 - Fix a bug in permit_list_match that made it much too willing to say
   4052   that two permit lists matched.
   4053 
   4054 - Unless DEBUG_DNS_UPDATES is defined, print more user-friendly (and
   4055   also more compact) messages about DNS updates.
   4056 
   4057 - Fix a bug in generating wire-format domain names for the FQDN option.
   4058 
   4059 - Fix a bug where the FQDN option would not be returned if the client
   4060   requested it, contrary to the standard.
   4061 
   4062 - On Darwin, use the FreeBSD DHCP client script.
   4063 
   4064 - On NetBSD/sparc, don't check for casting warnings.
   4065 
   4066 - Add a flag in the DHCP client to disable updating the client's A
   4067   record when sending an FQDN option indicating that the client is
   4068   going to update its A record.
   4069 
   4070 - In the client, don't attempt a DNS update until one second after
   4071   configuring the new IP address, and if the update times out, keep
   4072   trying until a response, positive or negative, is received from the
   4073   DNS server.
   4074 
   4075 - Fix an uninitialized memory bug in the DHCP client.
   4076 
   4077 - Apply some FreeBSD-specific bug fixes suggested by Murray Stokely.
   4078 
   4079 - Fix a bug in ns_parserr(), where it was returning the wrong sort
   4080   of result code in some cases (suggested by Ben Harris of the
   4081   NetBSD project).
   4082 
   4083 - Fix a bug in is_identifier(), where it was checking against EOF
   4084   instead of the END_OF_FILE token (also suggested by Ben Harris).
   4085 
   4086 - Fix a bug where if an option universe contained no options, the
   4087   DHCP server could dump core (Walter Steiner).
   4088 
   4089 - Fix a bug in the handling of encapsulated options.
   4090 
   4091 - Fix a bug that prevented NWIP suboptions from being processed.
   4092 
   4093 - Delete the FTS_BOOTP and FTS_RESERVED states and implement them
   4094   as modifier flags to the FTS_ACTIVE state, as called for in the
   4095   failover protocol standard.
   4096 
   4097 - Fix bugs in the pool merging code that resulted in references and
   4098   dereferences of null pointers.   This bug had no impact unless the
   4099   POINTER_DEBUG flag was defined.
   4100 
   4101 - In the server, added a do-forward-updates flag that can be used to
   4102   disable forward updates in all cases, so that sites that want the
   4103   clients to take sole responsibility for updating their A record can
   4104   do so.
   4105 
   4106 - Make it possible to disable optimization of PTR record updates.
   4107 
   4108 			Changes since 3.0.1rc5
   4109 
   4110 - Include some new documentation and changes provided by Karl Auer.
   4111 
   4112 - Add a workaround for some Lexmark printers that send a double-NUL-
   4113   terminated host-name option, which would break DNS updates.
   4114 
   4115 - Fix an off-by-one error in the MAC-address checking code for
   4116   DHCPRELEASE that was added in 3.0.1rc5.
   4117 
   4118 - Fix a bug where client-specific information was not being discarded
   4119   from the lease when it expired or was released, resulting in
   4120   problems if the lease was reallocated to a different client.
   4121 
   4122 - If more than one allocation pool is specified that has the same set
   4123   of constraints as another allocation pool on the same shared
   4124   network, merge the two pools.
   4125 
   4126 - Don't print an error in fallback_discard, since this just causes
   4127   confusion and does not appear to be helping to encourage anyone to
   4128   fix this bug.
   4129 
   4130 			Changes since 3.0.1rc4
   4131 
   4132 - Fix a bug that would cause the DHCP server to spin if asked to parse
   4133   a certain kind of incorrect statement.
   4134 
   4135 - Fix a related bug that would prevent an error from being reported in
   4136   the same case.
   4137 
   4138 - Additional documentation.
   4139 
   4140 - Make sure that the hardware address matches the lease when
   4141   processing a DHCPRELEASE message.
   4142 
   4143 			Changes since 3.0.1rc3
   4144 
   4145 - A minor bug fix in the arguments to a logging function call.
   4146 - Documentation update for dhcpd.conf.
   4147 
   4148 			Changes since 3.0.1rc2
   4149 
   4150 - Allow the primary to send a POOLREQ message.   This isn't what the current
   4151   failover draft says to do, so we may have to back it out if I can't get the
   4152   authors to relent, but the scheme for balancing that's specified in the
   4153   current draft seems needlessly hairy, so I'm floating a trial balloon.
   4154   The rc1 code did not implement the method described in the draft either.
   4155 
   4156 			Changes since 3.0.1rc1
   4157 
   4158 - Treat NXDOMAIN and NXRRSET as success when we are trying to delete a
   4159   domain or RRSET.   This allows the DHCP server to forget about a name
   4160   it added to the DNS once it's been removed, even if the DHCP server
   4161   wasn't the one that removed it.
   4162 
   4163 - Install defaults for failover maximum outstanding updates and maximum
   4164   silent time.   This prevents problems that might occur if these values
   4165   were not configured.
   4166 
   4167 - Don't do DDNS deletes if ddns-update-style is none.
   4168 
   4169 - Return relay agent information options in DHCPNAK.   This prevents DHCPNAK
   4170   messages from being dropped when the relay agent information option contains
   4171   routing information.
   4172 
   4173 - Fix a problem where coming up in recover wouldn't result in an update
   4174   request being sent.
   4175 
   4176 - Add some more chatty messages when we start a recovery update and when it's
   4177   done.
   4178 
   4179 - Fix a possible problem where some state might have been left around
   4180   after the peer lost contact and regained contact about how many updates
   4181   were pending.
   4182 
   4183 - Don't nix a lease update because of a lease conflict.   This test has
   4184   never (as far as I know) prevented a mistake, and it appears to cause
   4185   problems with failover.
   4186 
   4187 - Add support in rc history code for keeping a selective history, rather
   4188   than a history of all references and dereferences.   This code is only used
   4189   when extensive additional debugging is enabled.
   4190 
   4191 			   Changes since 3.0
   4192 
   4193 - Make allocators for hash tables.   As a side effect, this fixes a memory
   4194   smash in the subclass allocation code.
   4195 
   4196 - Fix a small bug in omshell where if you try to close an object when
   4197   no object is open, it dumps core.
   4198 
   4199 - Fix an obscure coredump that could occur on shutdown.
   4200 
   4201 - Fix a bug in the recording of host declaration rubouts in the lease file.
   4202 
   4203 - Fix two potential spins in the host deletion code.
   4204 
   4205 - Fix a core dump that would happen if an application tried to update
   4206   a host object attribute with a null value.
   4207 
   4208 		Changes since 3.0 Release Candidate 12
   4209 
   4210 - Fix a memory leak in the evaluation code.
   4211 
   4212 - Fix an obscure core dump.
   4213 
   4214 - Print a couple of new warnings when parsing the configuration file
   4215   when crucial information is left out.
   4216 
   4217 - Log "no free leases" as an error.
   4218 
   4219 - Documentation updates.
   4220 
   4221 		Changes since 3.0 Release Candidate 11
   4222 
   4223 - Always return a subnet selection option if one is sent.
   4224 
   4225 - Fix a warning that was being printed because an automatic data
   4226   structure wasn't zeroed.
   4227 
   4228 - Fix some failover state transitions that were being handled
   4229   incorrectly.
   4230 
   4231 - When supersede_lease is called on a lease whose end time has already
   4232   expired, but for which a state transition has not yet been done, do
   4233   a state transition.   This fixes the case where if the secondary
   4234   allocated a lease to a client and the lease "expired" while the
   4235   secondary was in partner-down, no expiry event would actually
   4236   happen, so the lease would remain active until the primary was
   4237   restarted.
   4238 
   4239 		Changes since 3.0 Release Candidate 10
   4240 
   4241 - Fix a bug that was preventing released leases from changing state
   4242   in failover-enabled pools.
   4243 
   4244 - Fix a core dump in the client identifier finder code (for host
   4245   declarations).
   4246 
   4247 - Finish fixing a bug where bogus data would sometimes get logged to
   4248   the dhclient.leases file because it was opened as descriptor 2.
   4249 
   4250 - Fix the Linux dhclient-script according to suggestions made by
   4251   several people on the dhcp-client mailing list.
   4252 
   4253 - Log successful DNS updates at LOG_INFO, not LOG_ERROR.
   4254 
   4255 - Print an error message and refuse to run if a failover peer is
   4256   defined but not referenced by any pools.
   4257 
   4258 - Correct a confusing error message in failover.
   4259 
   4260 		Changes since 3.0 Release Candidate 9
   4261 
   4262 - Fix a bug in lease allocation for Dynamic BOOTP clients.
   4263 
   4264 	  Changes since 3.0 Release Candidate 8 Patchlevel 2
   4265 
   4266 - Fix a bug that prevented update-static-leases from working.
   4267 
   4268 - Document failover-state OMAPI object.
   4269 
   4270 - Fix a compilation error on SunOS 4.
   4271 
   4272 	  Changes since 3.0 Release Candidate 8 Patchlevel 1
   4273 
   4274 - Fix a parsing bug that broke dns updates (both interim and ad-hoc).
   4275   This was introduced in rc8pl1 as an unintended result of the memory
   4276   leakage fixes that were in pl1.
   4277 
   4278 - Fix a long-standing bug where the server would record that an update
   4279   had been done for a client with no name, even though no update had
   4280   been done, and then when the client's lease expired the deletion of
   4281   that nonexistant record would time out because the name was the null
   4282   string.
   4283 
   4284 - Clean up the omshell, dhcpctl and omapi man pages a bit.
   4285 
   4286 		Changes since 3.0 Release Candidate 8
   4287 
   4288 - Fix a bug that could cause the DHCP server to spin if
   4289   one-lease-per-client was enabled.
   4290 
   4291 - Fix a bug that was causing core dumps on BSD/os in the presence of
   4292   malformed packets.
   4293 
   4294 - In partner-down state, don't restrict lease lengths to MCLT.
   4295 
   4296 - On the failover secondary, record the MCLT received from the primary
   4297   so that if we come up without a connection to the primary we don't
   4298   wind up giving out zero-length leases.
   4299 
   4300 - Fix some compilation problems on BSD/os.
   4301 
   4302 - Fix a bunch of memory leaks.
   4303 
   4304 - Fix a couple of bugs in the option printer.
   4305 
   4306 - Fix an obscure error reporting bug in the dns update code, and also
   4307   make the message clearer when a key algorithm isn't supported.
   4308 
   4309 - Fix a bug in the tracing code that prevented trace runs that used
   4310   tcp connections from being played back.
   4311 
   4312 - Add some additional debugging capability for catching memory leaks
   4313   on exit.
   4314 
   4315 - Make the client release the lease correctly on shutdown.
   4316 
   4317 - Add some configurability to the build system.
   4318 
   4319 - Install omshell manual page in man1, not man8.
   4320 
   4321 - Craig Gwydir sent in a patch that fixes a long-standing bug in the
   4322   DHCP client that could cause core dumps, but that for some reason
   4323   hadn't been noticed until now.
   4324 
   4325 		Changes since 3.0 Release Candidate 7
   4326 
   4327 - Fix a bug in failover where we weren't sending updates after a
   4328   transition from communications-interrupted to normal.
   4329 
   4330 - Handle expired/released/reset -> free transition according to the
   4331   protocol specification (this works - the other way not only wasn't
   4332   conformant, but also didn't work).
   4333 
   4334 - Add a control object in both client and server that allows either
   4335   daemon to be shut down cleanly.
   4336 
   4337 - When writing a lease, if we run out of disk space, shut down the
   4338   output file and insist on writing a new one before proceeding.
   4339 
   4340 - In the server, if the OMAPI listener port is occupied, keep trying
   4341   to get it, rather than simply giving up and exiting.
   4342 
   4343 - Support fetching variables from leases and also updating and adding
   4344   variables to leases via OMAPI.
   4345 
   4346 - If two failover peers have wildly different clocks, refuse to start
   4347   doing failover.
   4348 
   4349 - Fix a bug in the DNS update code that could cause core dumps when
   4350   running on alpha processors.
   4351 
   4352 - Fixed a bug in ddns updates for static lease entries, thanks to a
   4353   patch from Andrey M Linkevitch.
   4354 
   4355 - Add support for Darwin/MacOS X
   4356 
   4357 - Install omshell (including new documentation).
   4358 
   4359 - Support DNS updates in the client (this is a very obscure feature
   4360   that most DHCP client users probably will not be able to use).
   4361 
   4362 - Somewhat cleaner status logging in the client.
   4363 
   4364 - Make OMAPI key naming syntax compatible with the way keys are
   4365   actually named (key names are domain names).
   4366 
   4367 - Fix a bug in the lease file writer.
   4368 
   4369 - Install DHCP ISC headers in a different place than BIND 9 ISC
   4370   headers, to avoid causing trouble in BIND 9 builds.
   4371 
   4372 - Don't send updates for attributes on an object when the attributes
   4373   haven't changed.   Support deleting attributes on remote objects.
   4374 
   4375 - Fix a number of bugs in omshell, and add the unset and refresh
   4376   statements.
   4377 
   4378 - Handle disconnects in OMAPI a little bit more intelligently (so that
   4379   the caller gets ECONNRESET instead of EINVAL).
   4380 
   4381 - Fix a bunch of bugs in the handling of clients that have existing
   4382   leases when the try to renew their leases while failover is
   4383   operating.
   4384 
   4385 		Changes since 3.0 Release Candidate 6
   4386 
   4387 - Fix a core dump that could happen when processing a DHCPREQUEST from
   4388   a client that had a host declaration that contained both a
   4389   fixed-address declaration and a dhcp-client-identifier option
   4390   declaration, if the client identifier was longer than nine bytes.
   4391 
   4392 - Fix a memory leak that could happen in certain obscure cases when
   4393   using omapi to manipulate leases.
   4394 
   4395 - Fix some bugs and omissions in omshell.
   4396 
   4397 		Changes since 3.0 Release Candidate 5
   4398 
   4399 - Fix a bug in omapi_object_dereference that prevented objects in
   4400   chains from having their reference counts decreased on dereference.
   4401 
   4402 - Fix a bug in omapi_object_dereference that would prevent object
   4403   chains from being freed upon removal of the last reference external
   4404   to the chain.
   4405 
   4406 - Fix a number of other memory leaks in the OMAPI protocol subsystem.
   4407 
   4408 - Add code in the OMAPI protocol handler to trace memory leakage.
   4409 
   4410 - Clean up the memory allocation/reference history printer.
   4411 
   4412 - Support input of dotted quads and colon-separated hex lists as
   4413   attribute values in omshell.
   4414 
   4415 - Fix a typo in the Linux interface discovery code.
   4416 
   4417 - Conditionalize a piece of trace code that wasn't conditional.
   4418 
   4419 		Changes since 3.0 Release Candidate 4
   4420 
   4421 - Fix a bug that would prevent leases from being abandoned properly on
   4422   DHCPDECLINE.
   4423 
   4424 - Fix failover peer OMAPI support.
   4425 
   4426 - In failover, correctly handle expiration of leases.   Previously,
   4427   leases would never be reclaimed because they couldn't make the
   4428   transition from EXPIRED to FREE.
   4429 
   4430 - Fix some broken failover state transitions.
   4431 
   4432 - Documentation fixes.
   4433 
   4434 - Take out an unnecessary check in DHCP relay agent information option
   4435   stashing code that was preventing REBINDING clients from rebinding.
   4436 
   4437 - Prevent failover peers from allocating leases in DHCPREQUEST
   4438   processing if the lease belongs to the other server.
   4439 
   4440 - Record server version in lease file introductory comment.
   4441 
   4442 - Correctly report connection errors in OMAPI and failover.
   4443 
   4444 - Make authentication signature algorithm name comparisons in OMAPI
   4445   case-insensitive.
   4446 
   4447 - Fix compile problem on SunOS 4.x
   4448 
   4449 - If a signature algorithm is not terminated with '.', terminate it so
   4450   that comparisons between fully-qualified names will work
   4451   consistently.
   4452 
   4453 - Different SIOCGIFCONF probe code, may "fix" problem on some Linux
   4454   systems with the probe not working correctly.
   4455 
   4456 - Don't allow user to type omapi key on command line of omshell.
   4457 
   4458 		Changes since 3.0 Release Candidate 3
   4459 
   4460 - Do lease billing on startup in a way that I *think* will finally do
   4461   the billing correctly - the previous method could overbill as a
   4462   result of duplicate leases.
   4463 
   4464 - Document OMAPI server objects.
   4465 
   4466 	  Changes since 3.0 Release Candidate 2 Patchlevel 1
   4467 
   4468 - Fix some problems in the DDNS update code.   Thanks to Albert
   4469   Herranz for figuring out the main problem.
   4470 
   4471 - Fix some reference counting errors on host entries that were causing
   4472   core dumps.
   4473 
   4474 - Fix a byte-swap bug in the token ring code, thanks to Jochen
   4475   Friedrich.
   4476 
   4477 - Fix a bug in lease billing, thanks to Jonas Bulow.
   4478 
   4479 		Changes since 3.0 Release Candidate 2
   4480 
   4481 - Change the conditions under which a DHCPRELEASE is actually
   4482   committed to be consistent with lease binding states rather than
   4483   using the lease end time.   This may fix some problems with the
   4484   billing class code.
   4485 
   4486 - Fix a bug where lease updates would fail on Digital Unix (and maybe
   4487   others) because malloc was called with a size of zero.
   4488 
   4489 - Fix a core dump that happens when the DHCP server can't create its
   4490   trace file.
   4491 
   4492 	  Changes since 3.0 Release Candidate 1 Patchlevel 1
   4493 
   4494 - Fix the dhcp_failover_put_message to not attempt to allocate a
   4495   zero-length buffer.   Some versions of malloc() fail if you try to
   4496   allocate a zero-length buffer, and this was causing problems on,
   4497   e.g., Digital Unix.
   4498 
   4499 - Fix a case where the failover code was printing an error message
   4500   when no error had occurred.
   4501 
   4502 - Fix a problem where when a server went down and back up again, the
   4503   peer would not see a state transition and so would stay in the
   4504   non-communicating state.
   4505 
   4506 - Be smart about going into recover_wait.
   4507 
   4508 - Fix a problem in the failover implementation where peers would fail
   4509   to come into sync if interrupted in the RECOVER state.   This could
   4510   have been the cause of some problems people have reported recently.
   4511 
   4512 - Fix a problem with billing classes where they would not be unbilled
   4513   when the client lease expired.
   4514 
   4515 - If select fails, figure out which descriptor is bad, and cut it out
   4516   of the I/O loop.   This prevents a potentially nasty spin.  I
   4517   haven't heard any report it in a while, but it came up consistently
   4518   in testing.
   4519 
   4520 - Fix a bug in the relay agent where if you specified interfaces on
   4521   the command line, it would fail.
   4522 
   4523 - Fix a couple of small bugs in the omapi connection object (no known
   4524   user impact).
   4525 
   4526 - Add the missing 3.0 Beta 1 lease conversion script.
   4527 
   4528 - Read dhcp client script hooks if they exist, rather than only if
   4529   they're executable.
   4530 
   4531 		Changes since 3.0 Release Candidate 1
   4532 
   4533 - Fix a memory smash that happens when fixed-address leases are used.
   4534   ANY SITE AT WHICH FIXED-ADDRESS STATEMENTS ARE BEING USED SHOULD
   4535   UPGRADE IMMEDIATELY.   This has been a long-standing bug - thanks to
   4536   Alvise Nobile for discovering it and helping me to find it!
   4537 
   4538 - Fix a small bug in binary-to-ascii, thanks to H. Peter Anvin of
   4539   Transmeta.
   4540 
   4541 - There is a known problem with the DHCP server doing failover on
   4542   Compaq Alpha systems.   This patchlevel is not a release candidate
   4543   because of this bug.   The bug should be straightforward to fix, so
   4544   a new release candidate is expected shortly.
   4545 
   4546 - There is a known problem in the DDNS update code that is probably a
   4547   bug, and is not, as far as we know, fixed in this patchlevel.
   4548 
   4549 		Changes since 3.0 Beta 2 Patchlevel 24
   4550 
   4551 - Went over problematic failover state transitions and made them all
   4552   work, so that failover should now much less fragile.
   4553 
   4554 - Add some dhcpctl and omapi documentation
   4555 
   4556 - Fix compile errors when compiling with unusual predefines.
   4557 
   4558 - Make Token Ring work on Linux 2.4
   4559 
   4560 - Fix the Digital Unix BPF_WORDALIGN bug.
   4561 
   4562 - Fix some dhcp client documentation errors.
   4563 
   4564 - Update some parts of the README file.
   4565 
   4566 - Support GCC on SCO.
   4567 
   4568 		Changes since 3.0 Beta 2 Patchlevel 23
   4569 
   4570 - Fix a bug in the DNS update code where a status code was not being
   4571   checked.   This may have been causing core dumps.
   4572 
   4573 - When parsing the lease file, if a lease declaration includes a
   4574   billing class statement, and the lease already has a billing class,
   4575   unbill the old class.
   4576 
   4577 - When processing failover transactions, where acks will be deferred,
   4578   process the state transition immediately.
   4579 
   4580 -  Don't try to use the new SIOCGIFCONF buffer size detection code on
   4581    Linux 2.0, which doesn't provide this functionality.
   4582 
   4583 - Apply a patch suggested by Tuan Uong for a problem in dlpi.c.
   4584 
   4585 - Fix a problem in using the which command in the configure script.
   4586 
   4587 - Fix a parse error in the client when setting up an omapi listener.
   4588 
   4589 - Document the -n and -g flags to the client.
   4590 
   4591 - Make sure there is always a stdin and stdout on startup.   This
   4592   prevents shell scripts from accidentally writing error messages into
   4593   configuration files that happen to be opened as stderr.
   4594 
   4595 - If an interface is removed, the client will now notice that it is
   4596   gone rather than spinning.   This has only been tested on NetBSD.
   4597 
   4598 - The client will attempt to get an address even if it can't create a
   4599   lease file.
   4600 
   4601 - Don't overwrite tracefiles.
   4602 
   4603 - Fix some memory allocation bugs in failover.
   4604 
   4605 		Changes since 3.0 Beta 2 Patchlevel 22
   4606 
   4607 - Apply some patches suggested by Cyrille Lefevre, who is maintaining
   4608   the FreeBSD ISC DHCP Distribution port.
   4609 
   4610 - Fix a core dump in DHCPRELEASE.
   4611 
   4612 		Changes since 3.0 Beta 2 Patchlevel 21
   4613 
   4614 - This time for sure: fix the spin described in the changes for pl20.
   4615 
   4616 		Changes since 3.0 Beta 2 Patchlevel 20
   4617 
   4618 - Fix a problem with Linux detecting large numbers of interfaces (Ben)
   4619 
   4620 - Fix a memory smash in the quotify code, which was introduced in
   4621   pl19.
   4622 
   4623 - Actually fix the spin described in the changes for pl20.   The
   4624   previous fix only partially fixed the problem - enough to get it
   4625   past the regression test.
   4626 
   4627 		Changes since 3.0 Beta 2 Patchlevel 19
   4628 
   4629 - Fix a bug that could cause the server to abort if compiled with
   4630   POINTER_DEBUG enabled.
   4631 
   4632 - Fix a bug that could cause the server to spin when responding to a
   4633   DHCPREQUEST.
   4634 
   4635 - Apply Joost Mulders' suggested patches for DLPI on x86.
   4636 
   4637 - Support NUL characters in quoted strings.
   4638 
   4639 - Install unformatted man pages on SunOS.
   4640 
   4641 		Changes since 3.0 Beta 2 Patchlevel 18
   4642 
   4643 - Allow the server to be placed in partner-down state using OMAPI.
   4644   (Damien Neil)
   4645 
   4646 - Implement omshell, which can be used to do arbitrary things to the
   4647   server (in theory). (Damien Neil)
   4648 
   4649 - Fix a case where if a client had two different leases the server could
   4650   actually dereference the second one when it hadn't been referenced,
   4651   leading to memory corruption and a core dump. (James Brister)
   4652 
   4653 - Fix a case where a client could request the address of another client's
   4654   lease, but find_lease wouldn't detect that the other client had it, and
   4655   would attempt to allocate it to the client, resulting in a lease conflict
   4656   message.
   4657 
   4658 - Fix a case where a client with more than one client identifier could be
   4659   given a lease where the hardware address was correct but the client
   4660   identifier was not, resulting in a lease conflict message.
   4661 
   4662 - Fix a problem where the server could write out a colon-separated
   4663   hex list as a value for a variable, which would then not parse.
   4664   The fix is to always write strings as quoted strings, with any
   4665   non-printable characters quoted as octal escape sequences.   So
   4666   a file written the old way still won't work, but new files written
   4667   this way will work.
   4668 
   4669 - Fix documentation for sending non-standard options.
   4670 
   4671 - Use unparsable names for unknown options.    WARNING: this will
   4672   break any configuration files that use the option-nnn convention.
   4673   If you want to continue to use this convention for some options,
   4674   please be sure to write a definition, like this:
   4675 
   4676   option option-nnn code nnn = string;
   4677 
   4678   You can use a descriptive name instead of option-nnn if you like.
   4679 
   4680 - Fix a problem where we would see a DHCPDISCOVER/DHCPOFFER/
   4681   DHCPREQUEST/DHCPACK/DHCPREQUEST/DHCPNAK sequence.   This was the
   4682   result of a deceptively silly bug in supersede_lease.
   4683 
   4684 - Fix client script exit status check, according to a fix supplied by
   4685   Hermann Lauer.
   4686 
   4687 - Fix an endianness bug in the tracefile support, regarding ICMP
   4688   messages.
   4689 
   4690 - Fix a bug in the client where the medium would not work correctly if
   4691   it contained quoted strings.
   4692 
   4693 		       ** there was no pl17 **
   4694 
   4695 		Changes since 3.0 Beta 2 Patchlevel 16
   4696 
   4697 - Add support for transaction tracing.   This allows the state of the
   4698   DHCP server on startup, and all the subsequent transactions, to be
   4699   recorded in a file which can then be played back to reproduce the
   4700   behaviour of the DHCP server.   This can be used to quickly
   4701   reproduce bugs that cause core dumps or corruption, and also for
   4702   tracking down memory leaks.
   4703 
   4704 - Incorporate some bug fixes provided by Joost Mulders for the DLPI
   4705   package which should clear up problems people have been seeing on
   4706   Solaris.
   4707 
   4708 - Fix bugs in the handling of options stored as linked lists (agent
   4709   options, fqdn options and nwip options) that could cause memory
   4710   corruption and core dumps.
   4711 
   4712 - Fix a bug in DHCPREQUEST handling that resulted in DHCPNAK messages
   4713   not being send in some cases when they were needed.
   4714 
   4715 - Make the lease structure somewhat more compact.
   4716 
   4717 - Make initial failover startup *much* faster.   This was researched
   4718   and implemented by Damien Neil.
   4719 
   4720 - Add a --version flag to all executables, which prints the program
   4721   name and version to standard output.
   4722 
   4723 - Don't rewrite the lease file every thousand leases.
   4724 
   4725 - A bug in nit.c for older SunOS machines was fixed by a patch sent in
   4726   by Takeshi Hagiwara.
   4727 
   4728 - Fix a memory corruption bug in the DHCP client.
   4729 
   4730 - Lots of documentation updates.
   4731 
   4732 - Add a feature allowing environment variables to be passed to the
   4733   DHCP client script on the DHCP client command line.
   4734 
   4735 - Fix client medium support, which had been broken for some time.
   4736 
   4737 - Fix a bug in the DHCP client initial startup backoff interval, which
   4738   would cause two DHCPDISCOVERS to be sent back-to-back on startup.
   4739 
   4740 		Changes since 3.0 Beta 2 Patchlevel 15
   4741 
   4742 - Some documentation tweaks.
   4743 
   4744 - Maybe fix a problem in the DLPI code.
   4745 
   4746 - Fix some error code space inconsistencies in ddns update code.
   4747 
   4748 - Support relay agents that intercept unicast DHCP messages to stuff
   4749   agent options into them.
   4750 
   4751 - Fix a small memory leak in the relay agent option support code.
   4752 
   4753 - Fix a core dump that would occur if a packet was sent with no
   4754   options.
   4755 
   4756 		Changes since 3.0 Beta 2 Patchlevel 14
   4757 
   4758 - Finish fixing a long-standing bug in the agent options code.   This
   4759   was causing core dumps and failing to operate correctly - in
   4760   particular, agent option stashing wasn't working.   Agent option
   4761   stashing should now be working, meaning that agent options can be
   4762   used in class statements to control address allocation.
   4763 
   4764 - Fix up documentation.
   4765 
   4766 - Fix a couple of small memory leaks that would have added up
   4767   significantly in a high-demand situation.
   4768 
   4769 - Add a log-facility configuration parameter.
   4770 
   4771 - Fix a compile error on some older operating systems.
   4772 
   4773 - Add the ability in the client to execute certain statements before
   4774   transmitting packets to the server.   Handy for debugging; not much
   4775   practical use otherwise.
   4776 
   4777 - Don't send faked-out giaddr when renewing or bound - again, useful
   4778   for debugging.
   4779 
   4780 		Changes since 3.0 Beta 2 Patchlevel 13
   4781 
   4782 - Fixed a problem where the fqdn decoder would sometimes try to store
   4783   an option with an (unsigned) negative length, resulting in a core
   4784   dump on some systems.
   4785 
   4786 - Work around the Win98 DHCP client, which NUL-terminates the FQDN
   4787   option.
   4788 
   4789 - Work around Win98 and Win2k clients that will claim they want to do
   4790   the update even when they don't have any way to do it.
   4791 
   4792 - Fix some log messages that can be printed when failover is operating
   4793   that were not printing enough information.
   4794 
   4795 - It was possible for a DHCPDISCOVER to get an allocation even when
   4796   the state machine said the server shouldn't be responding.
   4797 
   4798 - Don't load balance DHCPREQUESTs from clients in RENEWING and
   4799   REBINDING, since in RENEWING, if we heard it, it's for us, and in
   4800   REBINDING, the client wouldn't have got to REBINDING if its primary
   4801   were answering.
   4802 
   4803 - When we get a bogus state lease binding state transition, don't do
   4804   the transition.
   4805 
   4806 
   4807 		Changes since 3.0 Beta 2 Patchlevel 12
   4808 
   4809 - Fixed a couple of silly compile errors.
   4810 
   4811 		Changes since 3.0 Beta 2 Patchlevel 11
   4812 
   4813 - Albert Herranz tracked down and fixed a subtle bug in the base64
   4814   decoder that would prevent any key with an 'x' in its base64
   4815   representation from working correctly.
   4816 
   4817 - Thanks to Chris Cheney and Michael Sanders, we have a fix for the
   4818   hang that they both spotted in the DHCP server - when
   4819   one-lease-per-client was set, the code to release the "other" lease
   4820   could spin.
   4821 
   4822 - Fix a problem with alignment of the input buffer in bpf in cases
   4823   where two packets arrive in the same bpf read.
   4824 
   4825 - Fix a problem where the relay agent would crash if you specified an
   4826   interface name on the command line.
   4827 
   4828 - Add the ability to conditionalize client behaviour based on the
   4829   client state.
   4830 
   4831 - Add support for the FQDN option, and added support for a new way of
   4832   doing ddns updates (ddns update style interim) that allows more than
   4833   one DHCP server to update the DNS for the same network(s).   This
   4834   was implemented by Damien Neil with some additional functionality
   4835   added by Ted Lemon.
   4836 
   4837 - Damien added a "log" statement, so that the configuration file can
   4838   be made to log debugging information and other information.
   4839 
   4840 - Fixed a bug that caused option buffers not to be terminated with an
   4841   end option.
   4842 
   4843 - Fixed a long-standing bug in the support for option spaces where the
   4844   options are stored as an ordered list rather than in a hash table,
   4845   which could theoretically result in memory pool corruption.
   4846 
   4847 - Prevent hardware declarations with no actual hardware address from
   4848   being written as something unparsable, and behave correctly in the
   4849   face of a null hardware address on input.
   4850 
   4851 - Allow key names to be FQDNs, and qualify the algorithm name if it is
   4852   specified unqualified.
   4853 
   4854 - Modify the DDNS update code so that it never prints the "resolver
   4855   failed" message, but instead says *why* the resolver failed.
   4856 
   4857 - Officially support the subnet selection option, which now has an
   4858   RFC.
   4859 
   4860 - Fix a build bug on MacOS X.
   4861 
   4862 - Allow administrator to disable ping checking.
   4863 
   4864 - Clean up dhcpd.conf documentation and add more information about how
   4865   it works.
   4866 
   4867 		Changes since 3.0 Beta 2 Patchlevel 10
   4868 
   4869 - Fix a bug introduced during debugging (!) and accidentally committed
   4870   to CVS.
   4871 
   4872 		Changes since 3.0 Beta 2 Patchlevel 9
   4873 
   4874 - Fix DHCP client handling of vendor encapsulated options.
   4875 
   4876 - Fix a bug in the handling of relay agent information options introduced
   4877   in patchlevel 9.
   4878 
   4879 - Stash agent options on client leases by default, and use the stashed
   4880   options at renewal time.
   4881 
   4882 - Add the ability to test the client's binding state in the client
   4883   configuration language.
   4884 
   4885 - Fix a core dump in the DNS update code.
   4886 
   4887 - Fix some expression evaluation bugs that were causing updates to be
   4888   done when no client hostname was received.
   4889 
   4890 - Fix expression evaluation debugging printfs.
   4891 
   4892 - Teach pretty_print_option to print options in option spaces other than
   4893   the DHCP option space.
   4894 
   4895 - Add a warning message if the RHS of a not is not boolean.
   4896 
   4897 - Never select for more than a day, because some implementations of
   4898   select will just fail if the timeout is too long (!).
   4899 
   4900 - Fix a case where a DHCPDISCOVER from an unknown network would be
   4901   silently dropped.
   4902 
   4903 - Fix a bug where if a client requested an IP address for which a different
   4904   client had the lease, the DHCP server would reallocate it anyway.
   4905 
   4906 - Fix the DNS update code so that if the client changes its name, the DNS
   4907   will be correctly updated.
   4908 
   4909 		Changes since 3.0 Beta 2 Patchlevel 8
   4910 
   4911 - Oops, there was another subtle math error in the header-length
   4912   bounds-checking.
   4913 
   4914 		Changes since 3.0 Beta 2 Patchlevel 7
   4915 
   4916 - Oops, forgot to byte-swap udp header length before bounds-checking it.
   4917 
   4918 		Changes since 3.0 Beta 2 Patchlevel 6
   4919 
   4920 - Fix a possible DoS attack where a client could cause the checksummer
   4921   to dump core.   This was a read, not a write, so it shouldn't be
   4922   possible to exploit it any further than that.
   4923 
   4924 - Implement client- and server-side support for using the Client FQDN
   4925   option.
   4926 
   4927 - Support for other option spaces in the client has been added.   This
   4928   means that it is now possible to define a vendor option space on the
   4929   client, request options in that space from the server (which must
   4930   define the same option space), and then use those options in the
   4931   client.   This also allows NWIP and Client FQDN options to be used
   4932   meaningfully.
   4933 
   4934 - Add object initializer support.   This means that objects can now be
   4935   initialized to something other than all-zeros when allocated, which
   4936   makes, e.g., the interface object support code a little more robust.
   4937 
   4938 - Fix an off-by-one bug in the host stuffer.   This was causing host
   4939   deletes not the work, and may also have been causing OMAPI
   4940   connections to get dropped.   Thanks to James Brister for tracking
   4941   this one down!
   4942 
   4943 - Fixed a core dump in the interface discovery code that is triggered
   4944   when there is no subnet declaration for an interface, but the server
   4945   decides to continue running.   Thanks to Shane Kerr for tracking
   4946   down and fixing this problem.
   4947 
   4948 		Changes since 3.0 Beta 2 Patchlevel 5
   4949 
   4950 - Fix a bug in the recent enhancement to the interface discovery code
   4951   to support arbitrary-length interface lists.
   4952 
   4953 - Support NUL-terminated DHCP options when initializing client-script
   4954   environment.
   4955 
   4956 - Fix suffix operator.
   4957 
   4958 - Fix NetWare/IP option parsing.
   4959 
   4960 - Better error/status checking in dhcpctl initialization and omapi
   4961   connection code.
   4962 
   4963 - Fix a potential memory smash in dhcpctl code.
   4964 
   4965 - Fix SunOS4 and (maybe) Ultrix builds.
   4966 
   4967 - Fix a bug where a certain sort of incoming packet could cause a core
   4968   dump on Solaris (and probably elsewhere).
   4969 
   4970 - Add some more safety checks in error logging code.
   4971 
   4972 - Add support for ISC_R_INCOMPLETE in OMAPI protocol connection code.
   4973 
   4974 - Fix relay agent so that if an interface is specified on the command
   4975   line, the relay agent does not dump core.
   4976 
   4977 - Fix class matching so that match if can be combined with match or
   4978   spawn with.
   4979 
   4980 - Do not allow spurious leases in the lease database to introduce
   4981   potentially bogus leases into the in-memory database.
   4982 
   4983 - Fix a byte-order problem in the client hardware address type code
   4984   for OMAPI.
   4985 
   4986 - Be slightly less picky about what sort of hardware addresses OMAPI
   4987   can install in host declarations.
   4988 
   4989 		Changes since 3.0 Beta 2 Patchlevel 4
   4990 
   4991 - Incorporated Peter Marschall's proposed change to array/record
   4992   parsing, which allows things like the slp-agent option to be encoded
   4993   correctly.   Thanks very much to Peter for taking the initiative to
   4994   do this, and for doing such a careful job of it (e.g., updating the
   4995   comments)!
   4996 
   4997 - Added an encoding for the slp-agent option.   :')
   4998 
   4999 - Fixed SunOS 4 build.  Thanks to Robert Elz for responding to my
   5000   request for help on this with patches!
   5001 
   5002 - Incorporated a change that should fix a problem reported by Philippe
   5003   Jumelle where when the network connection between two servers is
   5004   lost, they never reconnect.
   5005 
   5006 - Fix client script files other than that for NetBSD to actually use
   5007   make_resolv_conf as documented in the manual page.
   5008 
   5009 - Fix a bug in the packet handling code that could result in a core
   5010   dump.
   5011 
   5012 - Fix a bug in the bootp code where responses on the local net would
   5013   be sent to the wrong MAC address.   Thanks to Jerry Schave for
   5014   catching this one.
   5015 
   5016 		Changes since 3.0 Beta 2 Patchlevel 3
   5017 
   5018 - In the DHCP client, execute client statements prior to using the values
   5019   of options, so that the client configuration can overridden, e.g., the
   5020   lease renewal time.
   5021 
   5022 - Fix a reference counting error that would result in very reproducible
   5023   failures in updates, as well as occasional core dumps, if a zone was
   5024   declared without a key.
   5025 
   5026 - Fix some Linux 2.0 compilation problems.
   5027 
   5028 - Fix a bug in scope evaluation during execution of "on" statements that
   5029   caused values not to be recorded on leases.
   5030 
   5031 - If the dhcp-max-message-size option is specified in scope, and the
   5032   client didn't send this option, use the one specified in scope to
   5033   determine the maximum size of the response.
   5034 
   5035 		Changes since 3.0 Beta 2 Patchlevel 2
   5036 
   5037 - Fix a case where spawning subclasses were being allocated
   5038   incorrectly, resulting in a core dump.
   5039 
   5040 - Fix a case where the DHCP server might inappropriately NAK a
   5041   RENEWING client.
   5042 
   5043 - Fix a place dhcprequest() where static leases could leak.
   5044 
   5045 - Include memory.h in omapip_p.h so that we don't get warnings about
   5046   using memcmp().
   5047 
   5048 		Changes since 3.0 Beta 2 Patchlevel 1
   5049 
   5050 - Notice when SIOCFIGCONF returns more data than fit in the buffer -
   5051   allocate a larger buffer, and retry.   Thanks to Greg Fausak for
   5052   pointing this out.
   5053 
   5054 - In the server, if no interfaces were configured, report an error and
   5055   exit.
   5056 
   5057 - Don't ever record a state of 'startup'.
   5058 
   5059 - Don't try to evaluate the local failover binding address if none was
   5060   specified.   Thanks to Joseph Breu for finding this.
   5061