Home | History | Annotate | Line # | Download | only in gen 
 $NetBSD: syslog.3,v 1.35 2024/07/11 06:04:13 riastradh Exp $
 $OpenBSD: syslog.3,v 1.25 2005/07/22 03:16:58 jaredy Exp $

 Copyright (c) 1985, 1991, 1993
 The Regents of the University of California. All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions
 are met:
 1. Redistributions of source code must retain the above copyright
 notice, this list of conditions and the following disclaimer.
 2. Redistributions in binary form must reproduce the above copyright
 notice, this list of conditions and the following disclaimer in the
 documentation and/or other materials provided with the distribution.
 3. Neither the name of the University nor the names of its contributors
 may be used to endorse or promote products derived from this software
 without specific prior written permission.

 THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 SUCH DAMAGE.

 @(#)syslog.3 8.1 (Berkeley) 6/4/93

.Dd July 2, 2024
.Dt SYSLOG 3
.Os
.Sh NAME
.Nm syslog ,
.Nm syslog_r ,
.Nm vsyslog ,
.Nm vsyslog_r ,
.Nm syslogp ,
.Nm syslogp_r ,
.Nm syslog_ss ,
.Nm syslogp_ss ,
.Nm vsyslogp ,
.Nm vsyslogp_r ,
.Nm vsyslog_ss ,
.Nm vsyslogp_ss ,
.Nm openlog ,
.Nm openlog_r ,
.Nm closelog ,
.Nm closelog_r ,
.Nm setlogmask ,
.Nm setlogmask_r
.Nd control system log
.Sh LIBRARY
.Lb libc
.Sh SYNOPSIS
n syslog.h .Ft void
.Fn syslog "int priority" "const char *message" "..."
.Ft void
.Fn syslog_r "int priority" "struct syslog_data *data" "const char *message" "..."
.Ft void
.Fn syslogp "int priority" "const char *msgid" "const char *sdfmt" "const char *message" "..."
.Ft void
.Fn syslogp_r "int priority" "struct syslog_data *data" "const char *msgid" "const char *sdfmt" "const char *message" "..."
.Ft void
.Fn syslog_ss "int priority" "struct syslog_data *data" "const char *message" "..."
.Ft void
.Fn syslogp_ss "int priority" "struct syslog_data *data" "const char *msgid" "const char *sdfmt" "const char *message" "..."
.Ft void
.Fn openlog "const char *ident" "int logopt" "int facility"
.Ft void
.Fn openlog_r "const char *ident" "int logopt" "int facility" "struct syslog_data *data"
.Ft void
.Fn closelog void
.Ft void
.Fn closelog_r "struct syslog_data *data"
.Ft int
.Fn setlogmask "int maskpri"
.Ft int
.Fn setlogmask_r "int maskpri" "struct syslog_data *data"
n stdarg.h .Ft void
.Fn vsyslog "int priority" "const char *message" "va_list args"
.Ft void
.Fn vsyslog_r "int priority" "struct syslog_data *data" "const char *message" "va_list args"
.Ft void
.Fn vsyslogp "int priority" "const char *msgid" "const char *sdfmt" "const char *message" "va_list args"
.Ft void
.Fn vsyslogp_r "int priority" "struct syslog_data *data" "const char *msgid" "const char *sdfmt" "const char *message" "va_list args"
.Ft void
.Fn vsyslog_ss "int priority" "struct syslog_data *data" "const char *message" "va_list args"
.Ft void
.Fn vsyslogp_ss "int priority" "struct syslog_data *data" "const char *msgid" "const char *sdfmt" "const char *message" "va_list args"
.Sh DESCRIPTION
The
.Fn syslog
function
writes
.Fa message
to the system message logger.
The message is then written to the system console, log files,
logged-in users, or forwarded to other machines as appropriate (see
.Xr syslogd 8 ) .

p
The message is identical to a
.Xr printf 3
format string, except that
.Ql %m
is replaced by the current error
message.
(As denoted by the global variable
.Va errno ;
see
.Xr strerror 3 . )
A trailing newline is added if none is present.
 shouldn't the newline statement be removed?
 when logging through a socket a newline is
 not added nor is it required. -- ms
p
The
.Fn syslog_r
function is a multithread-safe version of the
.Fn syslog
function.
It takes a pointer to a
.Fa syslog_data
structure which is used to store
information.
This parameter must be initialized before
.Fn syslog_r
is called.
The
.Dv SYSLOG_DATA_INIT
constant is used for this purpose.
The
.Fa syslog_data
structure and the
.Dv SYSLOG_DATA_INIT
constant are defined as:
d -literal -offset indent struct syslog_data {
 int log_file;
 int connected;
 int opened;
 int log_stat;
 const char *log_tag;
 int log_fac;
 int log_mask;
};

#define SYSLOG_DATA_INIT { \e
 .log_file = -1, \e
 .log_fac = LOG_USER, \e
 .log_mask = 0xff, \e
}
.Ed

p
The structure is composed of the following elements:
l -tag -width connected -offset indent t Va log_file contains the file descriptor of the file where the message is logged
t Va connected indicates if connect has been done
t Va opened indicates if
.Fn openlog_r
has been called
t Va log_stat status bits, set by
.Fn openlog_r
t Va log_tag string to tag the entry with
t Va log_fac facility code
t Va log_mask mask of priorities to be logged
.El

p
The
.Fn syslog_ss
is the async-signal-safe version of
.Fn syslog_r
and is also multithread-safe.
It has the following limitations:
l -enum -offset indent t The format string cannot contain multi-byte character sequences.
t Positional
.Xr printf 3
arguments are not supported.
t Floating point formats are not supported and print
.Dq UNK .
t The time of the event is not sent to
.Xr syslogd 8 .
t The error string in the %m format is not printed symbolically but as
.Dq Error %d .
.El

p
For more information about async-signal-safe functions and signal handlers, see
.Xr signal 7 .

p
Similarly
.Fn vsyslog_ss
is the async-signal-safe version of
.Fn vsyslog_r .
Same for
.Fn syslogp_ss
and
.Fn syslogp_r ,
and finally
.Fn vsyslogp_ss
and
.Fn vsyslogp_r .

p
The
.Fn vsyslog
function
is an alternative form in which the arguments have already been captured
using the variable-length argument facilities of
.Xr stdarg 3 .

p
The
.Fn syslogp
variants take additional arguments which correspond to new fields in the
syslog-protocol message format.
All three arguments are evaluated as
.Xr printf 3
format strings and any of them can be
.Dv NULL .
This enables applications to use message IDs, structured data, and UTF-8 encoded
content in messages.

p
The message is tagged with
.Fa priority .
Priorities are encoded as a
.Fa facility
and a
.Em level .
The facility describes the part of the system
generating the message.
The level is selected from the following
.Em ordered
(high to low) list:
l -tag -width LOG_AUTHPRIV t Dv LOG_EMERG A panic condition.
This is normally broadcast to all users.
t Dv LOG_ALERT A condition that should be corrected immediately, such as a corrupted
system database.
t Dv LOG_CRIT Critical conditions, e.g., hard device errors.
t Dv LOG_ERR Errors.
t Dv LOG_WARNING Warning messages.
t Dv LOG_NOTICE Conditions that are not error conditions,
but should possibly be handled specially.
t Dv LOG_INFO Informational messages.
t Dv LOG_DEBUG Messages that contain information
normally of use only when debugging a program.
.El

p
The
.Fn vsyslog_r
is used the same way as
.Fn vsyslog
except that it takes an additional pointer to a
.Fa syslog_data
structure.
It is a multithread-safe version of the
.Fn vsyslog
function described above.
 The
 .Fn vsyslog_ss
 is the async-signal-safe version of
 .Fn vsyslog_r ,
 is also multithread-safe, and has the same limitations as
 .Fn syslog_ss .
p
The
.Fn openlog
function
provides for more specialized processing of the messages sent
by
.Fn syslog
and
.Fn vsyslog .
The parameter
.Fa ident
is a string that will be prepended to every message.
The
.Fa logopt
argument
is a bit field specifying logging options, which is formed by
.Tn OR Ns 'ing
one or more of the following values:
l -tag -width LOG_AUTHPRIV t Dv LOG_CONS If
.Fn syslog
cannot pass the message to
.Xr syslogd 8
it will attempt to write the message to the console

q Dq Pa /dev/console .
t Dv LOG_NDELAY Open the connection to
.Xr syslogd 8
immediately.
Normally the open is delayed until the first message is logged.
Useful for programs that need to manage the order in which file
descriptors are allocated.
t Dv LOG_NLOG Stops syslog from writing to the system log.
Only useful with
.Dv LOG_PERROR .
t Dv LOG_PERROR Write the message to standard error output as well to the system log.
t Dv LOG_PID Log the process id with each message: useful for identifying
instantiations of daemons.
(This PID is placed within brackets
between the ident and the message.)
t Dv LOG_PTRIM Trim anything syslog added to the message before writing to
standard error output.
.El

p
The
.Fa facility
parameter encodes a default facility to be assigned to all messages
that do not have an explicit facility encoded:
l -tag -width LOG_AUTHPRIV t Dv LOG_AUTH The authorization system:
.Xr login 1 ,
.Xr su 1 ,
.Xr getty 8 ,
etc.
t Dv LOG_AUTHPRIV The same as
.Dv LOG_AUTH ,
but logged to a file readable only by
selected individuals.
t Dv LOG_CRON The cron daemon:
.Xr cron 8 .
t Dv LOG_DAEMON System daemons, such as
.Xr routed 8 ,
that are not provided for explicitly by other facilities.
t Dv LOG_FTP The file transfer protocol daemon:
.Xr ftpd 8 .
t Dv LOG_KERN Messages generated by the kernel.
These cannot be generated by any user processes.
t Dv LOG_LPR The line printer spooling system:
.Xr lpr 1 ,
.Xr lpc 8 ,
.Xr lpd 8 ,
etc.
t Dv LOG_MAIL The mail system.
t Dv LOG_NEWS The network news system.
t Dv LOG_SYSLOG Messages generated internally by
.Xr syslogd 8 .
t Dv LOG_USER Messages generated by random user processes.
This is the default facility identifier if none is specified.
t Dv LOG_UUCP The uucp system.
t Dv LOG_LOCAL0 Reserved for local use.
Similarly for
.Dv LOG_LOCAL1
through
.Dv LOG_LOCAL7 .
.El

p
The
.Fn openlog_r
function is the multithread-safe version of the
.Fn openlog
function.
It takes an additional pointer to a
.Fa syslog_data
structure.
This function must be used in conjunction with the other
multithread-safe functions.

p
The
.Fn closelog
function
can be used to close the log file.

p
The
.Fn closelog_r
does the same thing as
.Xr closelog 3
but in a multithread-safe way and takes an additional
pointer to a
.Fa syslog_data
structure.

p
The
.Fn setlogmask
function
sets the log priority mask to
.Fa maskpri
and returns the previous mask.
Calls to
.Fn syslog
with a priority not set in
.Fa maskpri
are rejected.
The mask for an individual priority
.Fa pri
is calculated by the macro
.Fn LOG_MASK pri ;
the mask for all priorities up to and including
.Fa toppri
is given by the macro
.Fn LOG_UPTO toppri .
The default allows all priorities to be logged.

p
The
.Fn setlogmask_r
function is the multithread-safe version of
.Fn setlogmask .
It takes an additional pointer to a
.Fa syslog_data
structure.
.Sh RETURN VALUES
The routines
.Fn closelog ,
.Fn closelog_r ,
.Fn openlog ,
.Fn openlog_r ,
.Fn syslog ,
.Fn syslog_r ,
.Fn vsyslog ,
.Fn vsyslog_r ,
.Fn syslogp ,
.Fn syslogp_r ,
.Fn vsyslogp ,
and
.Fn vsyslogp_r
return no value.

p
The routines
.Fn setlogmask
and
.Fn setlogmask_r
always return the previous log mask level.
.Sh EXAMPLES
d -literal -offset indent -compact syslog(LOG_ALERT, "who: internal error 23");

openlog("ftpd", LOG_PID | LOG_NDELAY, LOG_FTP);

setlogmask(LOG_UPTO(LOG_ERR));

syslog(LOG_INFO, "Connection from host %d", CallingHost);

syslog(LOG_INFO|LOG_LOCAL2, "foobar error: %m");

syslogp(LOG_INFO|LOG_LOCAL2, NULL, NULL, "foobar error: %m");

syslogp(LOG_INFO, "ID%d