xref: /src/sys/arch/acorn32/conf/INSTALL

#	$NetBSD: INSTALL,v 1.74 2016/12/08 11:31:09 nat Exp $
#
#	INSTALL -- NetBSD/acorn32 install configuration
#
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include		"arch/acorn32/conf/std.acorn32"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#ident		"INSTALL-$Revision: 1.74 $"

# estimated number of users
maxusers	32

# Standard system options

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
#options 	NTP		# NTP phase/frequency locked loop

# CPU options
options 	CPU_SA110	# Support the SA110 core
options 	CPU_ARM6	# Support the ARM6 core
options 	CPU_ARM7	# Support the ARM7 core
#options 	CPU_ARM8	# Support the ARM8 core
#options 	ARM6_LATE_ABORT	# ARM6XX late abort support

# For StrongARM only kernels
#makeoptions	COPTS="-O2 -march=armv3m -mtune=strongarm"

# File systems

file-system	FFS		# UFS
#file-system	LFS		# log-structured file system
#file-system	MFS		# memory file system
file-system	NFS		# Network file system
#file-system 	ADOSFS		# AmigaDOS-compatible file system
#file-system 	EXT2FS		# second extended file system (linux)
file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	MSDOSFS		# MS-DOS file system
#file-system	FDESC		# /dev/fd
file-system	FILECORE	# Acorn filecore file system
file-system	KERNFS		# /kern
#file-system	NULLFS		# loopback file system
#file-system 	OVERLAY		# overlay filesystem
#file-system	PROCFS		# /proc
#file-system	UMAPFS		# NULLFS + uid and gid remapping
#file-system	UNION		# union file system
file-system	PTYFS		# /dev/pts/N support

# File system options
#options 	QUOTA		# legacy UFS quotas
#options 	QUOTA2		# new, in-filesystem UFS quotas
#options 	FFS_EI		# FFS Endian Independent support
options 	WAPBL		# File system journaling support
#options 	NFSSERVER
options 	FFS_NO_SNAPSHOT	# No FFS snapshot support

# Networking options

#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
#options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	PIM		# Protocol Independent Multicast
#options 	NETATALK	# AppleTalk networking
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

# Compatibility options

#options 	COMPAT_43	# 4.3BSD compatibility.
#options 	COMPAT_09	# NetBSD 0.9,
#options 	COMPAT_10	# NetBSD 1.0,
#options 	COMPAT_11	# NetBSD 1.1,
options		COMPAT_15	# NetBSD 1.5,
options 	COMPAT_12	# NetBSD 1.2,
options 	COMPAT_13	# NetBSD 1.3,
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_16	# NetBSD 1.6,
options 	COMPAT_20	# NetBSD 2.0,
options 	COMPAT_30	# NetBSD 3.0, and
options 	COMPAT_40	# NetBSD 4.0 binary compatibility.
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.

# Shared memory options

#options 	SYSVMSG		# System V-like message queues
#options 	SYSVSEM		# System V-like semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
#options 	SYSVSHM		# System V-like memory sharing

# Device options

options 	MEMORY_DISK_HOOKS	# boottime setup of ramdisk
options 	MEMORY_DISK_ROOT_SIZE=4700	# Size in blocks
options 	MEMORY_DISK_IS_ROOT	# use memory disk as root
options 	MEMORY_DISK_RBFLAGS=RB_SINGLE	# boot in single-user mode

# Miscellaneous kernel options
#options 	KTRACE		# system call tracing, a la ktrace(1)
#options 	IRQSTATS	# manage IRQ statistics
#options 	SCSIVERBOSE	# Verbose SCSI errors
options 	USERCONF	# userconf(4) support
options		PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Development and Debugging options

#options 	ARM700BUGTRACK	# track the ARM700 swi bug
#options 	PORTMASTER	# Enable PortMaster only options
options 	DIAGNOSTIC	# internal consistency checks
#options 	PMAP_DEBUG	# Enable pmap_debug_level code
options 	DDB		# in-kernel debugger
pseudo-device	ksyms
#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#makeoptions	DEBUG="-g"	# compile full symbol table

config		netbsd	root on ? type ffs

# serial console ... the conaddr is hardcoded as the pioc address + 4*com offset
# this really be fixed some day
#options 	COMCONSOLE,CONADDR="0x210000+4*0x3f8",CONUNIT=0,CONSPEED=9600

# The main bus device
mainbus0 at root

# The boot CPU
cpu0 at mainbus?

# The IOMD
iomd0	at mainbus?

# system clock via IOMD
clock*	at iomd?

# IIC bus device
iomdiic* at iomd?
iic0 at iomdiic?

# RTC device via IIC bus
pcfrtc*	at iic? addr 0x50

# VIDC device
vidc0		at mainbus?

# WSCONS
# ws console uses DUMB, SUN or VT100 terminal emulation
#options 	WSEMUL_NODUMB
#options 	WSEMUL_SUN
options 	WSEMUL_VT100

#options 	WSDISPLAY_COMPAT_RAWKBD
#options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling

#options 	FONT_BOLD8x16
#options 	FONT_GALLANT12x22	# Very nice font
#options 	FONT_LUCIDA16x29
#options 	FONT_OMRON12x20		# looks funny
#options 	FONT_QVSS8x15		# broken ?
options 	FONT_SONY12x25		# looks like VT220 font
#options 	FONT_SONY8x16		# not tested
#options 	FONT_VT220L8x8		# 8x8 font as in Arch. cons
#options 	FONT_VT220L8x16		# 8x(2x8) font as in Arch. cons
#options 	FONT_VT220L8x10		# not tested
#options 	FONT_VT220L8x20		# not tested

vidcvideo0	at vidc?		# wscons driver for VIDC
wsdisplay*	at vidcvideo? console ?	# display itself

iomdkbc*	at iomd?		# IOMD keyboard/mouse interface

pckbd*		at iomdkbc? slot ?	# PS/2 keyboard
options 	PCKBD_LAYOUT=KB_UK
wskbd*		at pckbd?

pms*		at iomdkbc? slot ?	# PS/2 mouse
wsmouse*	at pms?

qms*		at iomd?		# ws quadmouse driver
wsmouse*	at qms?			# wsmouse on ws quadmouse

pseudo-device	wsmux


# Peripheral IO Controller
pioc0	at mainbus? base 0x00210000

# IDE disk controller
wdc0	at pioc? offset 0x01f0 irq 9
#wdc*	at pioc? offset 0x0170 irq -1

# ATA (IDE) bus support
atabus* at ata?

wd*	at atabus? drive ?
atapibus* at atapi?
cd*	at atapibus? drive ?
sd*	at atapibus? drive ?

# Floppy disk controller
fdc*	at pioc? offset 0x03f0 irq 12 dack 0x2000
fdc*	at pioc? offset 0x0370 irq -1 dack 0x2000
fd0	at fdc? drive ?

# Serial ports
com*	at pioc? offset 0x03f8 irq 10
#com*	at pioc? offset 0x02f8 irq -1
#com*	at pioc? offset 0x0338 irq -1
#com*	at pioc? offset 0x0238 irq -1

# Parallel ports
lpt*	at pioc? offset 0x0278 irq 0
#lpt*	at pioc? offset 0x0378 irq -1
#lpt*	at pioc? offset 0x03bc irq -1

# Audio device
vidcaudio0	at vidc?
audio*		at vidcaudio0

options VAUDIOSPEAKER
spkr0	at audio0		# PC speaker (synthesized)

# Podule bus device
podulebus0	at root

sec*	at podulebus?			# Acorn SCSI card
scsibus* at sec?

cosc*	at podulebus?			# MCS Connect32 SCSI II card
scsibus* at cosc?

ptsc*	at podulebus?			# Power-Tec SCSI II card
scsibus* at ptsc?

csc*	at podulebus?			# Cumana SCSI II card
scsibus* at csc?

oak*	at podulebus?			# Oak SCSI I card
scsibus* at oak?

csa*	at podulebus?			# Cumana SCSI I adapter
scsibus* at csa?

hcsc*	at podulebus0 slot ?		# HCCS 8-bit SCSI interface
scsibus* at hcsc?

sd*	at scsibus? target ? lun ?	# SCSI disk drives
st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
#ch*	at scsibus? target ? lun ?	# SCSI auto-changers
#uk*	at scsibus? target ? lun ?	# SCSI unknown device
#ss*	at scsibus? target ? lun ?	# SCSI scanner

dtide*	at podulebus?			# D.T. Software IDE card

hcide*	at podulebus?			# HCCS IDE card

icside*	at podulebus?			# ICS IDE card

rapide*	at podulebus?			# Yellowstone RapIDE card

simide*	at podulebus?			# Simtec IDE card

amps*	at podulebus?			# Atomwide Multi-Port Serial card
com*	at amps?

ei*	at podulebus?			# Ether1 podules
ea*	at podulebus?			# Ether3 podules
eb0	at podulebus?			# EtherB network slot cards
ne*	at podulebus?			# NE2000 clone cards

pseudo-device	loop			# network loopback
#pseudo-device	bpfilter		# packet filter
#pseudo-device	sl			# CSLIP
#pseudo-device	ppp			# PPP
#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
#pseudo-device	tun			# network tunneling over tty
#pseudo-device	tap			# virtual Ethernet
#pseudo-device	gre			# generic L3 over IP tunnel
#pseudo-device	ipfilter		# ip filter
#pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith			# IPv[46] tcp relay translation i/f
#pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
#pseudo-device	strip			# STarmode Radio IP (Metricon Ricochet)
#pseudo-device	vlan			# IEEE 802.1q encapsulation
#pseudo-device	bridge			# simple inter-network bridging
pseudo-device	pty			# pseudo-terminals
pseudo-device	vnd			# disk-like interface to files
pseudo-device	ccd			# concatenated disk devices
#pseudo-device	raid			# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options	RF_INCLUDE_EVENODD=1
# options	RF_INCLUDE_RAID5_RS=1
# options	RF_INCLUDE_PARITYLOGGING=1
# options	RF_INCLUDE_CHAINDECLUSTER=1
# options	RF_INCLUDE_INTERDECLUSTER=1
# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
#pseudo-device	fss			# file system snapshot device
pseudo-device	md			# Ramdisk driver

# If the standard modes don't work for your monitor, you can specify
# a RISC-OS-format monitor definition file and a list of modes here.

#makeoptions	MONITOR="Taxan875+LR"
#makeoptions	MONITOR="AKF60"
#makeoptions	MODES="1024,768,60 1024,768,70 800,600,60 640,480,60 1280,1024 1152,900"