xref: /src/sys/arch/amiga/conf/GENERIC

#	$NetBSD: GENERIC,v 1.140 2000/03/23 22:44:42 is Exp $

#
#if 0
# GENERIC Amiga or DraCo
#
# This configuration file contains all possible options
#
# make AMIGA extracts the AMIGA configuration file.
# make DRACO extracts the DRACO configuration file.
# make INSTALL extracts the INSTALL configuration file.
#
# commit them, too.
#endif
#

include "arch/amiga/conf/std.amiga"

#ident 		"GENERIC-$Revision: 1.140 $"

maxusers	8
options 	RTC_OFFSET=0

#
# mainboards to support (in addition to Amiga)
#
#ifdef DRACO_CONFIGURATION
options 	DRACO

#endif
#ifdef AMIGA_CONFIGURATION
options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
				# MC68060 with an OS ROM up to (at least) 
				# V40 (OS3.1) and want to boot with the
				# bootblock.
				# You do not need this if you have a DraCo,
				# have no 68060 or NEVER use the bootblock
options		P5PPC68KBOARD	# Phase5 PPC/68K board support
#endif
#
# processors this kernel should support
#
options 	M68060		# support for 060
options 	M060SP		# MC68060 software support (Required for 060)
#ifdef AMIGA_CONFIGURATION
options 	M68040		# support for 040
options 	FPSP		# MC68040 floating point support
options 	M68030		# support for 030
options 	M68020		# support for 020/851
options 	FPU_EMULATE	# FPU emulation
#endif

# Pull in config fragments for kernel crypto.  This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.

#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix

#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix

#
# Networking options
#
options 	INET		# IP networking support (Required)
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	GATEWAY		# Packet forwarding
#options 	DIRECTED_BROADCAST	# Broadcast across subnets

#ifndef INSTALL_CONFIGURATION
#options 	MROUTING	# Multicast routing
options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
options 	ISO,TPIP	# OSI
options 	EON		# OSI tunneling over IP
options 	CCITT,LLC,HDLC	# X.25
options 	NETATALK	# AppleTalk networking protocols
#endif

options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
options 	PFIL_HOOKS	# pfil(9) packet filter hooks
options 	IPFILTER_LOG	# ipmon(8) log support

# Filesystems
file-system 	FFS		# Berkeley fast file system
file-system 	EXT2FS		# second extended file system (linux)
#file-system 	LFS		# log-structured filesystem (experimental)

#ifndef INSTALL_CONFIGURATION
file-system 	MFS		# Memory based filesystem
#endif

file-system 	NFS		# Network File System client side code
file-system 	ADOSFS		# AmigaDOS file system
file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
file-system 	MSDOSFS		# MS-DOS filesystem

file-system 	KERNFS		# kernel data-structure filesystem

#ifndef INSTALL_CONFIGURATION
file-system 	FDESC		# user file descriptor filesystem
file-system 	NULLFS		# loopback filesystem
file-system 	OVERLAY		# overlay filesystem
#file-system 	PORTAL		# Portal filesystem
file-system 	PROCFS		# /proc filesystem
file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union filesystem
#endif

# Filesystem options

#options 	FFS_EI		# FFS Endian Independant support

#ifndef INSTALL_CONFIGURATION
options 	QUOTA		# User and group quotas in FFS
#options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER	# Network File System server side code
#endif

#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

#
# Compatability options for various existing systems
#

#ifndef INSTALL_CONFIGURATION
options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
options 	COMPAT_43	# compatibility with 4.3BSD interfaces
options 	COMPAT_09	# compatibility with NetBSD 0.9
options 	COMPAT_10	# compatibility with NetBSD 1.0
options 	COMPAT_12	# compatibility with NetBSD 1.2
options 	COMPAT_13	# compatibility with NetBSD 1.3
options 	COMPAT_14	# compatibility with NetBSD 1.4
options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
options 	COMPAT_NOMID	# allow nonvalid machine id executables
#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
#endif

#ifndef INSTALL_CONFIGURATION
#
# Support for System V IPC facilities.
#
options 	SYSVSHM		# System V-like shared memory
options 	SYSVMSG		# System V-like messages
options 	SYSVSEM		# System V-like semaphores
#endif

#
# Support for various kernel options
#

#ifndef INSTALL_CONFIGURATION
options 	KTRACE		# system call tracing support
options 	LKM		# Loadable kernel modules
options 	UCONSOLE	# anyone can redirect a virtual console
#endif

#options 	INSECURE	# allow, among other insecure stuff, LKM 
				# loading in multi-user mode.
options 	SCSIVERBOSE	# Verbose SCSI errors

#ifndef INSTALL_CONFIGURATION
options 	NTP		# NTP phase/frequency locked loop
#endif

#
# Misc. debugging options
#
options 	DDB		# Kernel debugger
#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
options 	DIAGNOSTIC	# Extra kernel sanity checks
#options 	DEBUG		# Enable misc. kernel debugging code
#options 	SYSCALL_DEBUG	# debug all syscalls.
#options 	SCSIDEBUG	# Add SCSI debugging statements
#options 	PANICBUTTON	# Forced crash via keypress (???)

#
# Amiga specific options
#
#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
				# first bank of RAM. (default: unlimited)
#options	NKPTADD=4	# set this for 4 additional KPT pages
#options	NKPTADDSHIFT=24	# set this for 1 additional KPT page
				# per 16 MB (1<<24 bytes) of RAM
                                # define and decrease this, or define and
                                # increase NKPTADD if you get "out of PT pages"
                                # panics.

# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
# before the 10 secondinterval ends, or that KBDRESET does work at all.
#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga

# These options improve performance with the built-in serial port
# on slower Amigas.  Try the larger buffers first then lev6_defer.
#options 	SERIBUF_SIZE=4096
#options 	SEROBUF_SIZE=32
#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)

options 	RETINACONSOLE	# enable code to allow retina to be console
#ifdef AMIGA_CONFIGURATION
options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
options 	CL5426CONSOLE	# Cirrus console
options 	CV64CONSOLE	# CyberVision console
options 	TSENGCONSOLE	# Tseng console
options 	CV3DCONSOLE	# CyberVision 64/3D console
#endif

#ifdef AMIGA_CONFIGURATION
options 	GRF_ECS		# Enhanced Chip Set
options 	GRF_NTSC	# NTSC
options 	GRF_PAL		# PAL
options 	GRF_A2024	# Support for the A2024
options 	GRF_AGA		# AGA Chip Set
options 	GRF_AGA_VGA	# AGA VGAONLY timing
options 	GRF_SUPER72	# AGA Super-72
#endif
#options 	KFONT_8X11	# 8x11 font

# This is how you would tell the kernel the A2410 oscillator frequencies:
# The used frequencies are the defaults, and do not need option setting
#options 	ULOWELL_OSC1=36000000
#options 	ULOWELL_OSC2=66667000

# This is how you specify the blitting speed, higher values may speed up blits
# a littel bit.  If you raise this value too much some trash may appear.
# the commented version is the default.
#options 	RH_MEMCLK=61000000
# this option enables the 64 bit sprite which does not work
# for quite a few people.  E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#options 	RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#options 	RETINA_SPEED_HACK
# enables the Hardwarecursor which does not work on some systems.
#options 	RH_HARDWARECURSOR

#ifdef AMIGA_CONFIGURATION
grfcc0		at mainbus0		# custom chips
grfrt0		at zbus0		# retina II
#endif
grfrh0		at zbus0		# retina III
#ifdef AMIGA_CONFIGURATION
grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
grful0		at zbus0		# A2410
grfcv0		at zbus0		# CyberVision 64
grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
grfcv3d0	at zbus0		# CyberVision 64/3D
#endif

#ifdef AMIGA_CONFIGURATION
grf0		at grfcc0
grf1		at grfrt0
#endif
grf2		at grfrh0
#ifdef AMIGA_CONFIGURATION
grf3		at grfcl?
grf4		at grful0
grf5		at grfcv0
grf6		at grfet?
grf7		at grfcv3d0
#endif
#ifdef AMIGA_CONFIGURATION
ite0		at grf0			# terminal emulators for grfs
ite1		at grf1			# terminal emulators for grfs
#endif
ite2		at grf2			# terminal emulators for grfs
#ifdef AMIGA_CONFIGURATION
ite3		at grf3			# terminal emulators for grfs
ite4		at grf4			# terminal emulators for grfs
ite5		at grf5			# terminal emulators for grfs
ite6		at grf6			# terminal emulators for grfs
ite7		at grf7			# terminal emulators for grfs
#endif

msc0		at zbus0		# A2232 MSC multiport serial.
mfc0		at zbus0		# MultiFaceCard I/O board
mfcs0		at mfc0 unit 0		# MFC serial
mfcs1		at mfc0 unit 1		# MFC serial
#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
#mfcs2		at mfc1 unit 0
#mfcs3		at mfc1 unit 1
#mfcp1		at mfc1 unit 0

hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
com*		at hyper? port ?	# Hypercom3/4 serial ports
lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port

# not enabled yet... needs more testing and clock frequency autodetection
#iobl*		at zbus?		# zbus IOBlix
#com*		at iobl? port ?		# IOBlix serial ports
#lpt*		at iobl? port ?		# IOBlix parallel ports

#ifdef AMIGA_CONFIGURATION
#
# Amiga Mainboard devices (sans graphics and keyboard)
#

ser0		at mainbus0		# Amiga onboard serial
par0		at mainbus0		# Amiga onboard parallel
ms*		at mainbus0		# Amiga mice
fdc0		at mainbus0		# Amiga FDC
fd*		at fdc0 unit ?		# floppy disks on the later
a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
a2kbbc0 	at mainbus0		# A2000 battery backed clock
aucc*		at mainbus0		# Amiga CC audio
audio*		at aucc?
#endif

#ifdef DRACO_CONFIGURATION
#
# DraCo Mainboard devices (sans keyboard)
#

drbbc0		at mainbus0		# DraCo battery backed clock
drsupio0	at mainbus0		# DraCo superio chip
com*		at drsupio? port ?	# DraCo serial
lpt0		at drsupio? port ?	# DraCo parallel
#endif

#
# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
#

#ifndef DRACO_CONFIGURATION
# Alas, Melody-Z2 dont configure in the DraCo bus. 
melody* 	at zbus0		# Melody MPEG audio decoder
audio*		at melody?
#endif

# Ethernet cards:
le*		at zbus0		# A2065, Ameristar, Ariadne
ne*		at zbus0		# AriadneII
ed*		at zbus0		# Hydra, ASDG LanRover
es*		at zbus0		# CEI A4066 EthernetPLUS
qn*		at zbus0		# Quicknet

# Arcnet
bah*		at zbus0		# C=/Ameristar A2060 / 560

#ifdef AMIGA_CONFIGURATION
# Greater Valley Product Bus
gvpbus* 	at zbus0

# scsi stuff, all possible
gtsc0		at gvpbus?		# GVP series II scsi
scsibus*	at gtsc0
ahsc0		at mainbus0		# A3000 scsi
scsibus*	at ahsc0
atzsc0		at zbus0		# A2091 scsi
scsibus*	at atzsc0
wstsc0		at zbus0		# Wordsync II scsi
scsibus*	at wstsc0
ivsc0		at zbus0		# IVS scsi
scsibus*	at ivsc0
mlhsc0		at zbus0		# Hacker scsi
scsibus*	at mlhsc0
otgsc0		at zbus0		# 12 gauge scsi
scsibus*	at otgsc0
zssc0		at zbus0		# Zeus scsi
scsibus*	at zssc0
mgnsc0		at zbus0		# Magnum scsi
scsibus*	at mgnsc0
wesc0		at zbus0		# Warp Engine scsi
scsibus*	at wesc0
afsc0		at zbus0		# A4091 scsi
scsibus*	at afsc0
aftsc0		at mainbus0		# A4000T scsi
scsibus*	at aftsc0
flsc0		at zbus0		# FastlaneZ3 scsi
scsibus*	at flsc0
bzsc0		at zbus0		# Blizzard 1230 I,II scsi 
scsibus*	at bzsc0
bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi 
scsibus*	at bzivsc0
bztzsc0 	at zbus0		# Blizzard 2060 scsi
scsibus*	at bztzsc0
cbsc0		at zbus0		# CyberSCSI I
scsibus*	at cbsc0
cbiisc0 	at zbus0		# CyberSCSI II
scsibus*	at cbiisc0
cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
scsibus*	at cbiiisc0
empsc0		at zbus0		# Emplant scsi
scsibus*	at empsc0
idesc0		at mainbus0		# A4000 & A1200 IDE
scsibus*	at idesc0

# <<< comment out the idesc entries above if the following wdc/atapibus lines >>>
# <<< are uncommented >>>
#wdc0		at mainbus0		# A4000 & A1200 IDE bus
#wd*		at wdc? drive ?		#  + drives
#atapibus*	at wdc? channel ?	# ATAPI bus
#cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
#sd*		at atapibus? drive ?	# ATAPI disk drives

#pccard0		at mainbus0
#pcmcia*		at pccard0
#com*		at pcmcia? function ?		# Modems and serial cards
#pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
#aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
##wdc*		at pcmcia? function ?
#awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
##ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
#mbe*		at pcmcia? function ?		# MB8696x based Ethernet
#ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
#sm*		at pcmcia? function ?		# Megahertz Ethernet
#mhzc*		at pcmcia? function ?    # Megahertz Ethernet/Modem combo cards
#com*		at mhzc?
#sm*		at mhzc?

#endif

#ifdef DRACO_CONFIGURATION
drsc0		at mainbus0		# DraCo scsi
scsibus*	at drsc0
#endif


# each hard drive from low target to high
# will configure to the next available sd unit number
sd*	at scsibus? target ? lun ?	# scsi disks
st*	at scsibus? target ? lun ?	# scsi tapes
cd*	at scsibus? target ? lun ?	# scsi cds
ss*	at scsibus? target ? lun ?	# scsi scanner
ch*	at scsibus? target ? lun ?	# scsi autochangers
uk*	at scsibus? target ? lun ?	# scsi unknown

pseudo-device	loop			# loopback network interface
pseudo-device	sl		1	# SLIP network interfaces
pseudo-device	ppp		1	# PPP network interfaces
pseudo-device	tun		1	# network tunnel line discipline
#pseudo-device	gre		2	# generic L3 over IP tunnel
#pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
pseudo-device	bpfilter	16	# Berkeley packet filter
pseudo-device	ipfilter		# IP Filter package
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f

pseudo-device	view		4	# views (needed for grfcc)
pseudo-device	pty		16	# pseudo ptys

pseudo-device	vnd		4	# vnode pseudo-disks
pseudo-device	ccd		4	# concatenated disk devices
#pseudo-device	raid		4	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components

# rnd is EXPERIMENTAL at this point.
#pseudo-device  rnd                     # /dev/random and in-kernel generator
#options        RND_COM                 # use "com" randomness as well (BROKEN)

config	netbsd root on ? type ?