PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

Regen.

Regen for GENERIC.in rev. 1.149.

s/littel/little/ mainly in copy pasted comments.

Regen for previous commit to GENERIC.in.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.331.2;
regen

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

regen

Remove references to BRIDGE_IPF, it is now compiled in by default.

Regen to disable amiga/efa(4) in GENERIC, accidentally enabled in the
previous revision.

efa_probe() seems broken and misdetected even if absent on A1200.

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

regen

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Regen.
> Add drvctl to kernel which has audio device.
> audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.320.2; 1.320.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Disable svr4 and svr4_32 on sparc, sparc64 and amiga - the only places
where they were still enabled.

Remove TCP_COMPAT_42 from the config files. Pass 1.

branches: 1.314.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.311.2; 1.311.4;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.307.2;
Regen from GENERIC.in rev 1.125:

> Use COPTS="-O2 -fno-reorder-blocks" for kernels except INSTALL_CONFIGURATION.

Regen to reflect GENERIC.in rev 1.121-1.124:

rev 1.121:
> dd preliminary support for the Individual Computers ACA500 in the form of acahf
> driver. If ACA500 is equipped with supported accelerator with MMU, it allows
> running NetBSD on an Amiga 500.
>
> Since ACA is not autoconf-aware, and the probe procedure does not exist yet, the
> driver is activated with the ACA500_SUPPORT kernel option. The acahf driver
> is commented out in the GENERIC kernel for now (at least until it stops being
> very experimental and hackish).
>
> When it comes to ACA-specific hardware, for now the boot CF slot works. Support for everything else is incoming...

rev 1.122:
> Changes to ACA500 support:
> - Add support for second (aux) CF slot.
> - Rework wdc attachment to be more sane.
> - Add support for clockport on ACA500.
> - Fix style where appropriate.

rev 1.123:
> Implement the probe procedure for ACA500. Now the user just needs acafh0
> compiled in his kernel and it all should(tm) work.
>
> Due to lack of obio in amiga port, the probe is called directly from mbattach().
> This is going to change with the introduction of obio for all non-autoconfig
> expansions.

rev 1.124:
> Disable X-Surf devices for DRACO's configuration.
>
> - ne at xsh requires ax88190 and ax88190 requires mii(4),
> but all mii devices are declared only inside AMIGA_CONFIGURATION
> - X-Surf also add wdc(4) but all children devices like atabus and
> atapibus are declared only for AMIGA_CONFIGURATION
>
> XXX: DRACO kernel is not built during build.sh release.

branches: 1.305.2;
Nuke long dead NKPTADD and NKPTADDSHIFT options from config files.

Re-gen. Hi rkujawa.

G/C PFIL_HOOKS from the kernel configs.

branches: 1.302.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Include two MII PHY drivers, as needed by certain PCMCIA network cards.
More PHY drivers should be added when needed.

Regen configs.

Regen config files.

Regen configs.

Add z3rambd, commented out.

Regen kernel configs.

Regen configs.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.289.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

Regen configs.

regen configs

regen configs

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.284.2; 1.284.6; 1.284.8;
Add voodoofb support. Allows using 3Dfx Voodoo 3 in G-REX as a console.

Don\'t forget to disable atabus* when disabling the efa driver.

User reported that efa driver attached when FastATA hardware was absent, but 4x EIDE splitter was present. Disable efa in GENERIC until problem is solved and/or better probe function is written.

Tons of enchancements to MD PCI code:
- The G-REX 4000 and G-REX 1200 are now really supported and working (still only 1st slot but the rest are a matter of time).
- Add bridge identification to p5pb, simplifies the driver and make it more user-friendly.
- Retire P5PB_GENFB and P5PB_OLD_FIRMWARE options, these are now handled automatically, depending on used hardware and firmware.
- Add PCI bus reconfiguration support to p5pb (PCI_NETBSD_CONFIGURE), allows using G-REX without boot to AmigaOS.
- Bring p5pb registers desription up to date with my knowledge.
- Add a lot of debugging code to p5pb (enabled by P5PB_DEBUG kernel option).
- Fix PCI_NETBSD_CONFIGURE in mppb (now it really works).
- Fix quirk handling in zbus.
- Update GENERIC.in and regen the kernel configs.
- Misc cleanup.

Add cv3dpb, a driver for CyberVision64/3D PCI bridge, which was split from p5pb.

Changes to Phase5 hardware support:
- Rework p5pb driver - simplify, cleanup, make more flexible.
- Add p5membar driver, which handles PCI resources autoconfigured by the firmware.
- Introduce intermediate p5bus layer, between zbus and CSPPC/BPPC on-board devices (p5pb, cbiiisc, bppcsc).
- Add experimental G-REX support to p5pb (first slot support only).
- Split CV64/3D PCI bridge support into separate cv3dpb driver (to be committed later).

Approved by phx.

regen from GENERIC.in

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Amiga wscons/Xorg support, first phase.
Implemented wscons for CV64 and CV64/3D. Other graphics cards drivers are
prepared for it, but will not be attempted before Xorg is not running.
The wscons support is disabled by default. A GENERIC kernel should behave
like always. Use WSCONS to try out a kernel with wscons support.
Done by rkujawa@ and phx@.

branches: 1.275.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.274.2;
regen kernel configs

regen kernel configs

Minor changes to Amiga PCI MD code:
- Add bus enumeration and resource assignment (PCI_NETBSD_CONFIGURE) to mppb(4) - no more need to run AmigaOS to configure the bus.
- Add PCI configuration address register to p5pb(4).
- Add PCI I/O space support to p5pb(4).
- Move common code from p5pb(4) and mppb(4) to new pci_machdep.c file.
- Fix style.

Add driver for Prometheus PCI bridge.
Change approved by phx.

Add basic PCI support for amiga port.
Add missing bus_space(9) methods needed for MI PCI.
Add p5pb(4) - Phase5 PCI bridge driver (and the man page).
Add quirks table to zbus(4) - needed for p5pb.
Change approved by phx.

Fix DRACO kernel breakage introduced by my previous commit.

Add Bluetooth stack to Amiga. Tested with 3Com 3CRWB6096B on an A1200. Change approved by phx.

dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.265.2; 1.265.4;
regen

regenerate these configurations from GENERIC.in.

regen

regen

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.260.2; 1.260.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Regen from GENERIC.in rev 1.72.
Add COMPAT_50.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.256.2;
Regen from GENERIC.in rev 1.69:
> Enable fss(4) in not only GENERIC but also all !INSTALL kernels (i.e. DRACO).

Regen from GENERIC.in rev 1.68:
> Add accept filters to a proper file, as _READ_ME_FIRST_ claims.

Add accept filters to GENERIC kernels where they exist.

Regen for "options WAPBL".

branches: 1.252.6; 1.252.10; 1.252.12; 1.252.16;
Remove systrace. Ok core@.

branches: 1.251.2; 1.251.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.250.2;
Regenerate after addition of wdc_buddha.

regenerate after removal of OSI networking

Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.247.2; 1.247.4; 1.247.8;
Regenerated files after adding COMPAT_40.

regen

Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

branches: 1.244.2; 1.244.8; 1.244.10; 1.244.16; 1.244.18;
Regen. Per bernd@'s instructions.

Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.242.2; 1.242.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Regen from GENERIC.in:
1.54:
> Disable SYSTRACE by default on all kernels (discussed with core)
1.55:
> Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.239.2;
spc(4) can also attach to pcmcia(4), as was already in hpcmips/GENERIC
for quite some time. Add it to all systems that have pcmcia SCSI.

Pointed out by Bj�rn Johannesson <rherdware@yahoo.com> in private mail,
OK'd by matt@

Regen from GENERIC.in rev 1.53:
> Add CARP to further platforms

branches: 1.237.4;
regen (added stf).

branches: 1.236.2; 1.236.4; 1.236.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

regen

branches: 1.234.2;
Regen GENERIC config files.

Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.232.2; 1.232.4;
Regen from GENERIC.in rev 1.48:
> Add veriexec stuff to the common config file.

Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Regen from GENERIC.in rev 1.47:
> Remove obsolete options VNODE_OP_NOINLINE.

Regen from GENERIC.in rev 1.46:
> Adjust comments for options FFS_NO_SNAPSHOT.

regen

Regen from GENERIC.in rev 1.44:
> Add (commented out) file-system TMPFS in a proper file.

XXX: It seems `INSTALL_CONFIGURATION' in GENERIC.in should be reorganaized.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

regen.

regen.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.219.2;
Correct RCS Ids.

Add PTYFS (commented out) in the correct form.

Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

Regen from GENERIC.in rev 1.36:
> - Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
> (still commented out)
> - Add (also commented out) options BUFQ_PRIOCSCAN.
>
> Suggested by perry and soda on tech-kern.
> Please refer options(4) for details for these options.

regen: wsmux added (enabled only in WSCONS)

branches: 1.214.2;
Regen for COMPAT_20 addition.

regen: add SMBFS/nsmb, per PR port-amiga/29066 by Florian Stoehr

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Regen.

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.208.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.207.2;
Regenerate from GENERIC.in: no more idesc - we're using wdc.

Add COMPAT_BSDPTY on all the kernels that have COMPAT options.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Regen, added P1003_1B_SEMAPHORE.

Regenerate from master config files

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.200.2;
regen after wsfont changes

Regen: add atabus

regen after wsmouse addition

regen

Regenerate from GENERIC.in to include pseudo-device ksyms, where
appropriate.

branches: 1.195.2;
Add pseudo-device ksyms.

make /dev/reload optional (it is implemented for a.out kernels only, at
the moment.)

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

regen

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

regen from GENERIC.in

add SYSTRACE; approved perry.

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

regen for: enable USERCONF

Regen from GENERIC.in 1.2:
Only difference is that INSTALL now defines VNODE_OP_NOINLINE and MALLOC_NOLINE

Regenerate with new m4 mechanism (vs old cpp mechanism).
New files are same as old (except for whitespace differences), except
that the new GENERIC doesn't have melody, because GENERIC defines
DRACO and the latter can't have it.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

Tweak a comment so that it doens't turn into a trigraph if
the config file is included in the kernel source.

branches: 1.179.2; 1.179.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add options for console fonts

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

The "gif*" tunnelling interface does everything ipip does.
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.

Move Amiga PORT to ELF and new toolchain. Still missing:
support in UPGRADE to move old shared libs to /emul/aout

move ELF32 to std.amiga

Don't include audio devices in INSTALL kernels.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add toccata to the GENERIC configuration.

avoid '# define', this is processed by cpp

normalize description of INSECURE and SCSIVERBOSE

remove trailing spaces and tabs

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Amiga wsdisplay updates.

conf/GENERIC:
conf/files.amiga:
- Bring in wsfont definitions.

dev/grfabs_reg.h:
- Add macros for decomposing palette entries.

dev/amidisplaycc.c:
- Support for fonts, either wsfonts compiled into kernel
or runtime-loadable by ioctl. Font width still limited to 8,
height may vary.
- Limited support for mapped displays. No way to adjust display
mode. Palette setting works.
- Prettier default palette (white on black).
- Probes correctly as WSDISPLAY_TYPE_AMIGACC.
- Support for screen blanking.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.162.6;
Add bridge pseudo devices to GENERIC configs

Driver for the ALiENDESiGN Repulse board.
- only 8/16 bit precision supported
- no support for the Repulse special S/P-DIF I/O yet
- I think ac97.c needs some work.

branches: 1.160.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Fix various misspellings of compatible/compatibility.

- The ioblix zbus board comes in 24 MHz and 22.1184 MHz clock variants.
We default to the (newer, more sane) 22.1184 MHz value, but set it from
the iobzclock variable (in Hz), which is initialized from the IOBZCLOCK
configuration option and patchable.
XXX we should time the clock at system startup.
- add ioblix_zbus to the GENERIC configuration.

branches: 1.156.2;
Initial, still incomplete wscons support by Jukka Andberg, PR 11068

- Replace idesc driver by standard wdc attachment.
- Add PCMCIA driver for A1200.
(Both where options already.)

Add name of X-surf Ethernet board. Patch by Petri Koistinen.

Remove "rnd is EXPERIMENTAL" comments.

Add pseudo-device vlan

Reimplement the INSTALL changes in GENERIC and Makefile.

enable rnd device. they are now mandatory for ssh/sshd support,
so it makes more sense to enable it.
please disable them if there's any issues, but in that case, in-tree
ssh/sshd won't work.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Moving to a default of 64 PTYs.

Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.143.2;
Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

branches: 1.142.2;
add stf pseudo interface (commented out due to possible security risks)

Start to define an INSTALL kernel.

Initial IOBlix support. Only lpt and com; lpt untested; com assumes 24 MHz
clock (needs autoprobe of clock speed).

Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.

Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.

Nuke NKMEMCLUSTERS.

Add commented out configuration for MI wdc.
Note: enabling these will cause disk device renumbering if any IDE were
present (i.e. if sd0 was IDE drive 0, that drive will become wd0 and sd0
will be the first real SCSI drive.

Add commented out "ident"-command

add (commented out) PCMCIA devices entries

Tell changers to commit AMIGA and DRACO, too.

Add overlay to kernel configs.

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

Add commented out option SOFTDEP to all GENERIC kernels.

branches: 1.129.2;
Reboot support for P5PPC+68K boards, compiled in by "options P5PPC68KBOARD".
Without this, at least cyberppc+040 boards won't reboot, but just hang when
down.
The method is similar to what LinuxPPC/APUS does, but without EIEIO.

branches: 1.128.2;
It's time to be COMPAT_14.

no gvpbus on DRACO

less views, and comment them

COMPAT_SVR4 does not compile without EXEC_ELF32.

Allow for more than 1 of ed, es or qn

Add HyperCom 3+/4+ parallel port support

Add ext2 filesystem.

Add COMPAT_SVR4 for m68k.

Add commented out declaration for "ipip" interfaces.

branches: 1.119.2;
AGA: VGAonly timing (GRF_AGA_VGA), by Adam Ciarcinski

Fix language.

Pacify CPP.

Add an entry for the Cyberstorm Mk. III / CyberstormPPC SCSI driver by
Michael Hitch.

Alas, Melody boards don't configure in a DraCo.

In the future, the AMIGA and DRACO example files will be generated from
GENERIC by make in this directory. This way, they hopefully will stay
up-to-date.

Added options COMPAT_LINUX and EXEC_ELF32 as comments
to GENERIC configuration files.

Sorry. Hypercom1 and Hypercom3 code is not yet available.

Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.

Added a (commented out) configuration line for the RAIDframe device driver.

New driver for the Ariadne II.

Switch the Amiga port to UVM.

Re-enable mfc and msc serial drivers. Both compile, but only mfc is
currently known to work [I can't test the msc changes].
Add commented-out UVM option (until UVM is standard).

remove options FIFO; it's now the default

Make ser.c compile again (preliminary release). It needs still a lot of
cleanup, but at least mainstream usage should be possible again (worked
for me 5 minutes ago).

ser.c, mfc.c and msc.c dont compile currently.

MACHINE_NEW_NONCONTIG for NetBSD/Amiga. The older contiguous and
MACHINE_NONCONTIG stuff isn't supported anymore.

Add commented out "options FFS_EI"

Actually fix, rather than mask, the Amiga big machine panic: the pmap needs
to (pre)allocate enough kernel page table pages to (among others) map the
buffer cache buffers.

Cosmetics. Pointed out by Matthias Scheler.

Add the LIMITMEM workaround for the kernel address space size problem.
Will be removed as soon as the kernel can auto-adapt to its address space.

Get rid of std.draco file.
Amiga specific devices must be named in GENERIC, too.
While here, add vnd pseudo-devices to DRACO.

Add COMPAT_13.

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

make GENERIC more generic

Remove the unsuported options COMPAT_HPUX.
Enable COMAPT_09 and COMPAT_10 for old binaries.
Enable the console options for the CyberVision 64/3D and fix a typo for
ite7.

branches: 1.93.2;
Add CyberVision 64/3D support.

Driver for the VMC HyperCom3/zbus and the VMC HyperCom4.
lpt on HyperCom3 isn't supported yet.

TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it.
No optionboards yet for Melody, only audio driver.
MPEG data types for audio.c

The Blizzard-IV SCSI driver is now separate from the Blizzard-II.

Replace Fastlane and Blizzard SCSI driver frontends, using the machine
independent ncr53c9x driver. Add 12x0-IV support to the 1230 driver, and
add Cyberstorm SCSI I and II drivers.

First part of splitting lpt.c, and the NetBSD/Amiga "supio" frontend. Needs
a bit more work to allow an ISA frontend.

Enable the 800x600 Super72 display mode in the generic kernel.

Move definition of FPCOPROC into the Makefile, since it's always required.

Define supio, a direct bus with a single locator, the port number. This
is for "standard PC i/o stuff" at known and constant locations, e.g. when
multi-io chips are used on non-ISA mainboards.
Implement drsupio.c, the DraCo version of this.
Attach the generic com.c to this bus.
Remove the old drcom hack.

add a before tab to SCSIVERBOSE

add commented out reference SCSIVERBOSE option

Change the MI audio driver so it attaches to the MD driver in the
normal way. This requires adding a line to the config files to
get audio to work again.

branches: 1.81.2;
Make Amiga battery clocks autoconfiguration devices, so that they can be
left out of specialized configurations.

Make the DraCo hardware clock an autoconfiguration device.

Amiga glue code for the m68k fpu emulation subsystem.
XXX This (the m68k FPE, not the glue code) is known to be broken for
68LC040/68040V and 68LC060 cpus. This is also the reason we don't
bother to add options FPU_EMULATE to the DRACO configuration file, as
DraCos only come in 68040V (very few) and 68060 variants.

Implement the RTC_OFFSET kernel option/rtc_offset variable for the Amiga port.
To get the old behaviour, set options RTC_OFFSET=0 in your kernel configuration
file.

Add option BB060STUPIDROM, which makes the early kernel startup probe for
an 68060/68LC060, possibly switching on the 68060 FPU, instead of trusting
the value passed from the ROM OS to us by the bootblock.

Most 68060 boards, unlike the DraCo (which seems to have heavily patched OS
ROMs) don't set the AMIGA_68060 flag; instead, upon detecting an 68060, its
FPU is disabled to make the ROM scheduler work, and at a much later time (at
least, later than bootblock booting time), the "68060.library" installs the
Motorola 68060 software support, patches the scheduler for the 68060 FPU, and
re-enables the FPU.

Maybe this will be fixed one day, if Amiga International sells upgraded OS
ROMs which know about the 68060. Until then, and for legacy machines, this
kludge is needed if we want to boot a non-DraCo 68060.

Btw, thats why this is NOT in std.amiga, but in GENERIC; the DRACO
configuration doesn't need it (and I still plan to make std.draco go away).

Amiga custom chip audio hardware driver, by Stefan Thesing
(thesing@cs.uni-sb.de), heavily hacked upon by me to
- make it work with -current audio system
- make it shut off Amiga audio DMA only at appropriate places.
XXX A couple of bugs still remain, which well be handled later.
XXX Among them: only mono output; doesn't refuse to handle input, but chokes;
will not play last millichunk (is this 20 ms?) of data.

- Add and change some comments and options.
- Use 'options<SPACE><TAB>...'

The DraCo has had a com driver for quite a while.

Remove the ae entries for the Ariadne, it's now supported bye the le driver

comment PFIL_HOOKS as it is redundant (as an option) when used with ipfilter.

branches: 1.71.4;
"options GENERIC" is obsolute.

Adopt for new file system and root spec grammar.

Fix PR 3090. While here, fix two other comments.

Eliminate obsolete TIMEZONE and DST options.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.

branches: 1.67.2;
use pseudo-device ipfilter, not ipl.

Add PFIL_HOOKS and NSIP.

add a ipl pseudo-device.

- Move SWAPPAGER, VNODEPAGER and DEVPAGER to std.amiga.
- Remove not working KGDB.
- Add a warning for KBDRESET.
- Add ch and uk devices.

The original docs for the Phase 5 Development SCSI boards had a edito,
making me think that the Blizzard-IV and the Blizzard-2060 scsi
options have nearly identical DMA engines (just with a different
address offset). Alas, this isn't true.

Herewith I replace the "bznsc" (all-new-Blizzard-models) driver with the
"bztzsc" (Blizzard Two Zero).

enable bznsc driver

include update for config(8)
increase the number of bpfilters to 16

add COMPAT_12.

Bring in changes from the 1.2 branch which where only in the release

Disable the Hardwarecursor on the RetinaZ3 to solve the problems with
wrong mouse jumps under X11.
Remove the not working options KGDB from DRACO and GENERIC and added
an option to enable the HWC for the RetinaZ3

branches: 1.57.4;
GENERIC - added scsi scanner entry
- enable MS-DOS file system support
- removed unsed GRF_CL5426 entry
- added new graphics driver (grf6) for oMniBus, Domino and Merlin

Give example for INSECURE option in the GENERIC config file in a comment.
Closes PR 2355 giving a different explanation of the option than proposed.

Fixed a compile bug which come from the new mouse driver
Remove the fd* entry from the GENERIC config and changed the std.amiga
entry for the floppy

Added support for multiple floppy drives
Added entry for the emplant scsi driver

ups, ite5 is at grf5 and not at grf4

Updated for the new CyberVision64 console
and a small cleanup in the GENERIC config

cleanup, add (commented-out) serial buffer and lev6_defer options

add UNION/UMAPFS accepts CR 1890

add vnd (pr#1744) from Robert Leland

revert last commits was a mistake

add prototypes for isr stuff fixes pr# 1284 and 1569

new cybervision 64 grf from Bernd Ernesti <bernd@arresum.inka.de> and others
update config files (adding missing scsibus entry for aftsc0)

new quicknet ethernet driver from Kortelainen Mika <k125374@cs.tut.fi>

first attempt at A4000T support, remove GRF_AGA's dependence on GRF_ECS.
page 0 is now invalid, other minor cleanup.
from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

add arcnet device, (pr#1148)

changes for msc device

small cleanup

change state (and rename) RH 64BIT option. Add ccd to COFFEE

add more grful stuff

new Ariadne driver from Bernd Ernesti <bernd@arresum.inka.de>

added flsc and bzsc.

new grfcl driver submitted by Ezra Story <ezy@panix.com>

add new option to enable faster (and on some boards non-working) scroll
code for retina grahpics cards.

cleanup SG4_, fix magnum interrupts, gvp hack for ziii, new gvp configs, 4066
4066 interrupt fix, add baudrate gen and don't clear other port lines for mfc
from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

enable tun support.

Many changes from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
Now use amiga HW for soft interrupts, non-contig options (2 or many chunks),
interrupt handler lists, 4066 ethernet, 1291 scsi, option to defer level 6
interrupts to level 4 (deal with icky built-in serial port)

comment out fastlane driver.

support some newer stuff and some cleanup.
from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

bring up to current. change sun to sunos. handle changes in device
open params and autoconf match function params.

new RCS ID format.

branches: 1.27.2;
fix typo and add 4091 controller

GENERIC has AGA, otherwise some people can't run (i.e. monitors do not sync
at 15KHz).

remove hardcoded targets for sd0-7 now use sd*.

enable CD9660, and remove DEBUG.

add ed0 to GENERIC config.

branches: 1.22.2;
aga mode, finally.. thanks to osymh@gemini.oscs.montana.edu (Michael Hitch)

add ethernet driver to GENERIC and remove now uneeded ETHER options

make smaller remove lots of networking options

add back adosfs

include more device .h files, update Makefile.amiga to use new
vnode_if.x gerating procedure

some cleanup and various fixes for new fs code. plus some general
fixes from from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

forgot to add RETINACONSOLE option

add grfrh (retina ziii) from Donn Cave <donn@u.washington.edu>
light cleanup from me.

define cpu type options

5380 driver update from from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

lowercase options in files.amiga.newconf required, remove SYS* for now
from GENERIC and remove old configs that serve no current purpose.

an ide driver and hack reload device to do symbols.
from osymh@gemini.oscs.montana.edu (Michael L. Hitch)

bye MAXFDESCS

remove SYSVSHM

update from osymh@gemini.oscs.montana.edu (Michael L. Hitch) add support
for zthreebus siop scsi drivers and better machine recocgnition.

compile genassym static and add adosfs to GENERIC

resistance is futile, you will be assimilated.
amiga goes: config.new *and* /sys/scsi.
clock code coerced into a single .c file adding an accurate usec delay().
disklabel.c updated to DTRT, code to write RDB's to be added soon.
sbic (old scsi) converted over to new scsi and config this covers about
90% of users. Other drivers soon.

add commented out options for selecting font.

add A3000 (we use it in snapshot) and commented GENERIC. (pretty heafty)

add COMPAT_09

vmunix? no, we are netbsd.

more generic generic files.