xref: /src/sys/arch/amiga/conf/GENERIC

#	$NetBSD: GENERIC,v 1.66 1997/01/06 09:59:32 veego Exp $

#
# GENERIC AMIGA
#
# This configuration file contains all possible options
#

include "arch/amiga/conf/std.amiga"

maxusers	8
options		TIMEZONE=300, DST=1

#
# mainboards to support (in addition to Amiga)
#
options		DRACO

#
# processors this kernel should support
#
options		"M68060"	# support for 060
options		"M060SP"	# ...and MC68060 support package
options		"M68040"	# support for 040
options		FPSP		# MC68040 floating point support
options		"M68030"	# support for 030
options		"M68020"	# support for 020/851
options		FPCOPROC	# Support for MC6888[12] (Required)

#
# Networking options
#
options		INET		# IP networking support (Required)
#options	GATEWAY		# Packet forwarding
#options	DIRECTED_BROADCAST	# Broadcast across subnets
#options	MROUTING	# Multicast routing
#options	NS		# XNS
#options	NSIP		# XNS tunneling over IP
#options	ISO,TPIP	# OSI
#options	EON		# OSI tunneling over IP
#options	CCITT,LLC,HDLC	# X.25
#options	PPP_BSDCOMP,PPP_DEFLATE	# BSD compression for PPP
#options	PFIL_HOOKS	# pfil(9) packet filter hooks (Required
				# if you enable the pseudo-device ipl).

#
# File systems
#
options		FFS		# Berkeley fast file system
options		QUOTA		# UFS quotas
#options	LFS		# log-structured filesystem
options		MFS		# Memory based filesystem

options		NFSSERVER	# Network File System server side code
options		NFSCLIENT	# Network File System client side code

options		ADOSFS		# AmigaDOS file system
options		CD9660		# ISO 9660 + Rock Ridge file system
options		MSDOSFS		# MS-DOS file system
options		FDESC		# /dev/fd
options		FIFO		# FIFOs; RECOMMENDED
options		KERNFS		# /kern
options		NULLFS		# loopback file system
#options	PORTAL		# Portal Filesystem
options		PROCFS		# /proc
options		UMAPFS		# NULLFS + uid and gid remapping
options		UNION		# union file system


#
# Compatability options for various existing systems
#
options		COMPAT_12
options		"COMPAT_10"	# compatability with older NetBSD release
options		"COMPAT_09"	# compatability with older NetBSD release
options		"COMPAT_43"	# 4.3 BSD compatible system calls
options		COMPAT_SUNOS	# Support to run Sun (m68k) executables
options		"TCP_COMPAT_42"	# Use 4.2 BSD style TCP
options		"COMPAT_NOMID"	# allow nonvalid machine id executables
#options	COMPAT_HPUX	# HP300 compatability

#
# Support for System V IPC facilities.
#
options		SYSVSHM		# System V-like shared memory
options		SYSVMSG		# System V-like messages
options		SYSVSEM		# System V-like semaphores

#
# Support for various kernel options
#

options		UCONSOLE	# anyone can redirect a virtual console
#options	INSECURE	# allow, among other insecure stuff, LKM 
				# loading in multi-user mode.

options		GENERIC		# Mini-root boot support
options		LKM		# Loadable kernel modules
options		"NKMEMCLUSTERS=256"	# Size of kernel malloc area

#
# Misc. debuging options
#
options		DDB		# Kernel debugger
options		DIAGNOSTIC	# Add additional error checking code
options		KTRACE		# Add kernel tracing system call
#options	DEBUG		# Add debugging statements
#options	SYSCALL_DEBUG	# debug all syscalls.
#options	SCSIDEBUG	# Add SCSI debugging statements
#options	PANICBUTTON	# Forced crash via keypress (???)

#
# Amiga specific options
#
options		MACHINE_NONCONTIG # Non-contiguous memory support
# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
# before the 10 secondinterval ends, or that KBDRESET does work at all.
#options	KBDRESET	# sync on Ctrl-Amiga-Amiga

# These options improve performance with the built-in serial port
# on slower Amigas.  Try the larger buffers first then lev6_defer.
#options	"SERIBUF_SIZE=4096"
#options	"SEROBUF_SIZE=32"
#options	LEV6_DEFER	# defers l6 to l4 (below serial l5)

options		RETINACONSOLE	# enable code to allow retina to be console
options		ULOWELLCONSOLE	# enable code to allow a2410 to be console
options		CL5426CONSOLE	# Cirrus console
options		CV64CONSOLE	# CyberVision console
options		TSENGCONSOLE	# Tseng console

options		GRF_ECS		# Enhanced Chip Set
options		GRF_NTSC	# NTSC
options		GRF_PAL		# PAL
options		"GRF_A2024"	# Support for the A2024
options		GRF_AGA		# AGA Chip Set
#options	"KFONT_8X11"	# 8x11 font

# This is how you would tell the kernel the A2410 oscillator frequencies:
# The used frequencies are the defaults, and don't need option setting
#options	"ULOWELL_OSC1=36000000"
#options	"ULOWELL_OSC2=66667000"

# This is how you specify the blitting speed, higher values may speed up blits
# a littel bit.  If you raise this value too much some trash may appear.
# the commented version is the default.
#options	RH_MEMCLK 61000000
# this option enables the 64 bit sprite which doesn't seems to be work
# for quite a few people.  E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#options	RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#options	RETINA_SPEED_HACK
# enables the Hardwarecursor which does not work on some systems.
#options	RH_HARDWARECURSOR

grfcc0		at mainbus0		# custom chips
grfrt0		at zbus0		# retina II
grfrh0		at zbus0		# retina III
grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
grful0		at zbus0		# A2410
grfcv0		at zbus0		# CyberVision 64
grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)

grf0		at grfcc0
grf1		at grfrt0
grf2		at grfrh0
grf3		at grfcl?
grf4		at grful0
grf5		at grfcv0
grf6		at grfet?

ite0		at grf0			# terminal emulators for grf's
ite1		at grf1			# terminal emulators for grf's
ite2		at grf2			# terminal emulators for grf's
ite3		at grf3			# terminal emulators for grf's
ite4		at grf4			# terminal emulators for grf's
ite5		at grf5			# terminal emulators for grf's
ite6		at grf6			# terminal emulators for grf's

msc0		at zbus0		# A2232 MSC multiport serial.
mfc0		at zbus0		# MultiFaceCard I/O board
mfcs0		at mfc0 unit 0		# MFC serial
mfcs1		at mfc0 unit 1		# MFC serial
#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
#mfcs2		at mfc1 unit 0
#mfcs3		at mfc1 unit 1
#mfcp1		at mfc1 unit 0

le0		at zbus0		# Lance ethernet.
ed0		at zbus0		# dp8390 ethernet
es0		at zbus0		# SMC 91C90 ethernet
qn0		at zbus0		# quicknet ethernet
ae0		at zbus0		# Ariadne ethernet
bah0		at zbus0		# C= arcnet


# scsi stuff, all possible
gvpbus*		at zbus0
gtsc0		at gvpbus?		# GVP series II scsi
ahsc0		at mainbus0		# A3000 scsi
atzsc0		at zbus0
wstsc0		at zbus0		# Wordsync II scsi
ivsc0		at zbus0		# IVS scsi
mlhsc0		at zbus0		# Hacker scsi
otgsc0		at zbus0		# 12 gauge scsi
zssc0		at zbus0		# Zeus scsi
mgnsc0		at zbus0		# Magnum scsi
wesc0		at zbus0		# Warp Engine scsi
idesc0		at mainbus0		# A4000 & A1200 IDE
afsc0		at zbus0		# A4091 scsi
aftsc0		at mainbus0		# A4000T scsi
flsc0		at zbus0		# FastlaneZ3 scsi
bzsc0		at zbus0		# Blizzard 1230 I,II scsi 
bztzsc0		at zbus0		# Blizzard 1230 IV / 1260 / 2060 scsi
empsc0		at zbus0		# Emplant
drsc0		at mainbus0		# DraCo scsi

scsibus*	at gtsc0
scsibus*	at ahsc0
scsibus*	at atzsc0
scsibus*	at wstsc0
scsibus*	at ivsc0
scsibus*	at mlhsc0
scsibus*	at otgsc0
scsibus*	at zssc0
scsibus*	at mgnsc0
scsibus*	at wesc0
scsibus*	at idesc0
scsibus*	at afsc0
scsibus*	at aftsc0
scsibus*	at flsc0
scsibus*	at bzsc0
scsibus*	at bztzsc0
scsibus*	at empsc0
scsibus*	at drsc0

# each hard drive from low target to high
# will configure to the next available sd unit number
sd*	at scsibus? target ? lun ?	# scsi disks
st*	at scsibus? target ? lun ?	# scsi tapes
cd*	at scsibus? target ? lun ?	# scsi cd's
ss*	at scsibus? target ? lun ?	# scsi scanner
ch*	at scsibus? target ? lun ?	# scsi autochangers
uk*	at scsibus? target ? lun ?	# scsi unknown

pseudo-device	loop	1		# network loopback
pseudo-device	sl	1		# slip
pseudo-device	ppp	1		# ppp
#pseudo-device	tun	1		# network tunnel line discipline
pseudo-device	bpfilter	16	# berkeley packet filters
#pseudo-device	ipl			# ip filter

pseudo-device	view	10		# views
pseudo-device	pty	16		# pseudo terminals

pseudo-device	vnd	4		# paging to files
#pseudo-device	ccd	4		# concatenated disk devices

config	netbsd swap on generic