Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.139
      1 #	$NetBSD: GENERIC,v 1.139 2000/02/29 06:32:22 simonb Exp $
      2 
      3 #
      4 #if 0
      5 # GENERIC Amiga or DraCo
      6 #
      7 # This configuration file contains all possible options
      8 #
      9 # make AMIGA extracts the AMIGA configuration file.
     10 # make DRACO extracts the DRACO configuration file.
     11 #
     12 # commit them, too.
     13 #endif
     14 #
     15 
     16 include "arch/amiga/conf/std.amiga"
     17 
     18 #ident 		"GENERIC-$Revision: 1.139 $"
     19 
     20 maxusers	8
     21 options 	RTC_OFFSET=0
     22 
     23 #
     24 # mainboards to support (in addition to Amiga)
     25 #
     26 #ifdef DRACO_CONFIGURATION
     27 options 	DRACO
     28 
     29 #endif
     30 #ifdef AMIGA_CONFIGURATION
     31 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     32 				# MC68060 with an OS ROM up to (at least) 
     33 				# V40 (OS3.1) and want to boot with the
     34 				# bootblock.
     35 				# You do not need this if you have a DraCo,
     36 				# have no 68060 or NEVER use the bootblock
     37 options		P5PPC68KBOARD	# Phase5 PPC/68K board support
     38 #endif
     39 #
     40 # processors this kernel should support
     41 #
     42 options 	M68060		# support for 060
     43 options 	M060SP		# MC68060 software support (Required for 060)
     44 #ifdef AMIGA_CONFIGURATION
     45 options 	M68040		# support for 040
     46 options 	FPSP		# MC68040 floating point support
     47 options 	M68030		# support for 030
     48 options 	M68020		# support for 020/851
     49 options 	FPU_EMULATE	# FPU emulation
     50 #endif
     51 
     52 # Pull in config fragments for kernel crypto.  This is required for
     53 # options IPSEC etc. to work. If you want to run with IPSEC, uncomment
     54 # one of these, based on whether you use crypto-us or crypto-intl, and
     55 # adjust the prefixes as necessary.
     56 
     57 #prefix ../crypto-us/sys
     58 #cinclude "conf/files.crypto-us"
     59 #prefix
     60 
     61 #prefix ../crypto-intl/sys
     62 #cinclude "conf/files.crypto-intl"
     63 #prefix
     64 
     65 #
     66 # Networking options
     67 #
     68 options 	INET		# IP networking support (Required)
     69 options 	INET6		# IPV6
     70 #options 	IPSEC		# IP security
     71 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     72 #options 	IPSEC_DEBUG	# debug for IP security
     73 #options 	GATEWAY		# Packet forwarding
     74 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     75 #options 	MROUTING	# Multicast routing
     76 options 	NS		# XNS
     77 #options 	NSIP		# XNS tunneling over IP
     78 options 	ISO,TPIP	# OSI
     79 options 	EON		# OSI tunneling over IP
     80 options 	CCITT,LLC,HDLC	# X.25
     81 options 	NETATALK	# AppleTalk networking protocols
     82 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     83 options 	PPP_DEFLATE	# Deflate compression support for PPP
     84 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     85 options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     86 options 	IPFILTER_LOG	# ipmon(8) log support
     87 
     88 # Filesystems
     89 file-system 	FFS		# Berkeley fast file system
     90 file-system 	EXT2FS		# second extended file system (linux)
     91 #file-system 	LFS		# log-structured filesystem (experimental)
     92 file-system 	MFS		# Memory based filesystem
     93 file-system 	NFS		# Network File System client side code
     94 file-system 	ADOSFS		# AmigaDOS file system
     95 file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
     96 file-system 	MSDOSFS		# MS-DOS filesystem
     97 file-system 	FDESC		# user file descriptor filesystem
     98 file-system 	KERNFS		# kernel data-structure filesystem
     99 file-system 	NULLFS		# loopback filesystem
    100 file-system 	OVERLAY		# overlay filesystem
    101 #file-system 	PORTAL		# Portal filesystem
    102 file-system 	PROCFS		# /proc filesystem
    103 file-system 	UMAPFS		# NULLFS + uid and gid remapping
    104 file-system 	UNION		# union filesystem
    105 
    106 # Filesystem options
    107 options 	QUOTA		# User and group quotas in FFS
    108 #options 	FFS_EI		# FFS Endian Independant support
    109 #options 	SOFTDEP         # FFS soft updates support.
    110 options 	NFSSERVER	# Network File System server side code
    111 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    112 				# immutable) behave as system flags.
    113 
    114 #
    115 # Compatability options for various existing systems
    116 #
    117 options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
    118 options 	COMPAT_43	# compatibility with 4.3BSD interfaces
    119 options 	COMPAT_09	# compatibility with NetBSD 0.9
    120 options 	COMPAT_10	# compatibility with NetBSD 1.0
    121 options 	COMPAT_12	# compatibility with NetBSD 1.2
    122 options 	COMPAT_13	# compatibility with NetBSD 1.3
    123 options 	COMPAT_14	# compatibility with NetBSD 1.4
    124 options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
    125 options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
    126 options 	COMPAT_NOMID	# allow nonvalid machine id executables
    127 #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
    128 options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
    129 
    130 #
    131 # Support for System V IPC facilities.
    132 #
    133 options 	SYSVSHM		# System V-like shared memory
    134 options 	SYSVMSG		# System V-like messages
    135 options 	SYSVSEM		# System V-like semaphores
    136 
    137 #
    138 # Support for various kernel options
    139 #
    140 options 	KTRACE		# system call tracing support
    141 options 	LKM		# Loadable kernel modules
    142 options 	UCONSOLE	# anyone can redirect a virtual console
    143 #options 	INSECURE	# allow, among other insecure stuff, LKM 
    144 				# loading in multi-user mode.
    145 options 	SCSIVERBOSE	# Verbose SCSI errors
    146 
    147 options 	NTP		# NTP phase/frequency locked loop
    148 
    149 #
    150 # Misc. debugging options
    151 #
    152 options 	DDB		# Kernel debugger
    153 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    154 options 	DIAGNOSTIC	# Extra kernel sanity checks
    155 #options 	DEBUG		# Enable misc. kernel debugging code
    156 #options 	SYSCALL_DEBUG	# debug all syscalls.
    157 #options 	SCSIDEBUG	# Add SCSI debugging statements
    158 #options 	PANICBUTTON	# Forced crash via keypress (???)
    159 
    160 #
    161 # Amiga specific options
    162 #
    163 #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    164 				# first bank of RAM. (default: unlimited)
    165 #options	NKPTADD=4	# set this for 4 additional KPT pages
    166 #options	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    167 				# per 16 MB (1<<24 bytes) of RAM
    168                                 # define and decrease this, or define and
    169                                 # increase NKPTADD if you get "out of PT pages"
    170                                 # panics.
    171 
    172 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    173 # before the 10 secondinterval ends, or that KBDRESET does work at all.
    174 #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    175 
    176 # These options improve performance with the built-in serial port
    177 # on slower Amigas.  Try the larger buffers first then lev6_defer.
    178 #options 	SERIBUF_SIZE=4096
    179 #options 	SEROBUF_SIZE=32
    180 #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    181 
    182 options 	RETINACONSOLE	# enable code to allow retina to be console
    183 #ifdef AMIGA_CONFIGURATION
    184 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    185 options 	CL5426CONSOLE	# Cirrus console
    186 options 	CV64CONSOLE	# CyberVision console
    187 options 	TSENGCONSOLE	# Tseng console
    188 options 	CV3DCONSOLE	# CyberVision 64/3D console
    189 #endif
    190 
    191 #ifdef AMIGA_CONFIGURATION
    192 options 	GRF_ECS		# Enhanced Chip Set
    193 options 	GRF_NTSC	# NTSC
    194 options 	GRF_PAL		# PAL
    195 options 	GRF_A2024	# Support for the A2024
    196 options 	GRF_AGA		# AGA Chip Set
    197 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    198 options 	GRF_SUPER72	# AGA Super-72
    199 #endif
    200 #options 	KFONT_8X11	# 8x11 font
    201 
    202 # This is how you would tell the kernel the A2410 oscillator frequencies:
    203 # The used frequencies are the defaults, and do not need option setting
    204 #options 	ULOWELL_OSC1=36000000
    205 #options 	ULOWELL_OSC2=66667000
    206 
    207 # This is how you specify the blitting speed, higher values may speed up blits
    208 # a littel bit.  If you raise this value too much some trash may appear.
    209 # the commented version is the default.
    210 #options 	RH_MEMCLK=61000000
    211 # this option enables the 64 bit sprite which does not work
    212 # for quite a few people.  E.g. The cursor sprite will turn to a block
    213 # when moved to the top of the screen in X.
    214 #options 	RH_64BIT_SPRITE
    215 # enables fast scroll code appears to now work on 040 systems.
    216 #options 	RETINA_SPEED_HACK
    217 # enables the Hardwarecursor which does not work on some systems.
    218 #options 	RH_HARDWARECURSOR
    219 
    220 #ifdef AMIGA_CONFIGURATION
    221 grfcc0		at mainbus0		# custom chips
    222 grfrt0		at zbus0		# retina II
    223 #endif
    224 grfrh0		at zbus0		# retina III
    225 #ifdef AMIGA_CONFIGURATION
    226 grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
    227 grful0		at zbus0		# A2410
    228 grfcv0		at zbus0		# CyberVision 64
    229 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    230 grfcv3d0	at zbus0		# CyberVision 64/3D
    231 #endif
    232 
    233 #ifdef AMIGA_CONFIGURATION
    234 grf0		at grfcc0
    235 grf1		at grfrt0
    236 #endif
    237 grf2		at grfrh0
    238 #ifdef AMIGA_CONFIGURATION
    239 grf3		at grfcl?
    240 grf4		at grful0
    241 grf5		at grfcv0
    242 grf6		at grfet?
    243 grf7		at grfcv3d0
    244 #endif
    245 #ifdef AMIGA_CONFIGURATION
    246 ite0		at grf0			# terminal emulators for grfs
    247 ite1		at grf1			# terminal emulators for grfs
    248 #endif
    249 ite2		at grf2			# terminal emulators for grfs
    250 #ifdef AMIGA_CONFIGURATION
    251 ite3		at grf3			# terminal emulators for grfs
    252 ite4		at grf4			# terminal emulators for grfs
    253 ite5		at grf5			# terminal emulators for grfs
    254 ite6		at grf6			# terminal emulators for grfs
    255 ite7		at grf7			# terminal emulators for grfs
    256 #endif
    257 
    258 msc0		at zbus0		# A2232 MSC multiport serial.
    259 mfc0		at zbus0		# MultiFaceCard I/O board
    260 mfcs0		at mfc0 unit 0		# MFC serial
    261 mfcs1		at mfc0 unit 1		# MFC serial
    262 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    263 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    264 #mfcs2		at mfc1 unit 0
    265 #mfcs3		at mfc1 unit 1
    266 #mfcp1		at mfc1 unit 0
    267 
    268 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    269 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    270 com*		at hyper? port ?	# Hypercom3/4 serial ports
    271 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    272 
    273 #ifdef AMIGA_CONFIGURATION
    274 #
    275 # Amiga Mainboard devices (sans graphics and keyboard)
    276 #
    277 
    278 ser0		at mainbus0		# Amiga onboard serial
    279 par0		at mainbus0		# Amiga onboard parallel
    280 ms*		at mainbus0		# Amiga mice
    281 fdc0		at mainbus0		# Amiga FDC
    282 fd*		at fdc0 unit ?		# floppy disks on the later
    283 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    284 a2kbbc0 	at mainbus0		# A2000 battery backed clock
    285 aucc*		at mainbus0		# Amiga CC audio
    286 audio*		at aucc?
    287 #endif
    288 
    289 #ifdef DRACO_CONFIGURATION
    290 #
    291 # DraCo Mainboard devices (sans keyboard)
    292 #
    293 
    294 drbbc0		at mainbus0		# DraCo battery backed clock
    295 drsupio0	at mainbus0		# DraCo superio chip
    296 com*		at drsupio? port ?	# DraCo serial
    297 lpt0		at drsupio? port ?	# DraCo parallel
    298 #endif
    299 
    300 #
    301 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    302 #
    303 
    304 #ifndef DRACO_CONFIGURATION
    305 # Alas, Melody-Z2 dont configure in the DraCo bus. 
    306 melody* 	at zbus0		# Melody MPEG audio decoder
    307 audio*		at melody?
    308 #endif
    309 
    310 # Ethernet cards:
    311 le*		at zbus0		# A2065, Ameristar, Ariadne
    312 ne*		at zbus0		# AriadneII
    313 ed*		at zbus0		# Hydra, ASDG LanRover
    314 es*		at zbus0		# CEI A4066 EthernetPLUS
    315 qn*		at zbus0		# Quicknet
    316 
    317 # Arcnet
    318 bah*		at zbus0		# C=/Ameristar A2060 / 560
    319 
    320 #ifdef AMIGA_CONFIGURATION
    321 # Greater Valley Product Bus
    322 gvpbus* 	at zbus0
    323 
    324 # scsi stuff, all possible
    325 gtsc0		at gvpbus?		# GVP series II scsi
    326 scsibus*	at gtsc0
    327 ahsc0		at mainbus0		# A3000 scsi
    328 scsibus*	at ahsc0
    329 atzsc0		at zbus0		# A2091 scsi
    330 scsibus*	at atzsc0
    331 wstsc0		at zbus0		# Wordsync II scsi
    332 scsibus*	at wstsc0
    333 ivsc0		at zbus0		# IVS scsi
    334 scsibus*	at ivsc0
    335 mlhsc0		at zbus0		# Hacker scsi
    336 scsibus*	at mlhsc0
    337 otgsc0		at zbus0		# 12 gauge scsi
    338 scsibus*	at otgsc0
    339 zssc0		at zbus0		# Zeus scsi
    340 scsibus*	at zssc0
    341 mgnsc0		at zbus0		# Magnum scsi
    342 scsibus*	at mgnsc0
    343 wesc0		at zbus0		# Warp Engine scsi
    344 scsibus*	at wesc0
    345 afsc0		at zbus0		# A4091 scsi
    346 scsibus*	at afsc0
    347 aftsc0		at mainbus0		# A4000T scsi
    348 scsibus*	at aftsc0
    349 flsc0		at zbus0		# FastlaneZ3 scsi
    350 scsibus*	at flsc0
    351 bzsc0		at zbus0		# Blizzard 1230 I,II scsi 
    352 scsibus*	at bzsc0
    353 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi 
    354 scsibus*	at bzivsc0
    355 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    356 scsibus*	at bztzsc0
    357 cbsc0		at zbus0		# CyberSCSI I
    358 scsibus*	at cbsc0
    359 cbiisc0 	at zbus0		# CyberSCSI II
    360 scsibus*	at cbiisc0
    361 cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    362 scsibus*	at cbiiisc0
    363 empsc0		at zbus0		# Emplant scsi
    364 scsibus*	at empsc0
    365 idesc0		at mainbus0		# A4000 & A1200 IDE
    366 scsibus*	at idesc0
    367 
    368 # <<< comment out the idesc entries above if the following wdc/atapibus lines >>>
    369 # <<< are uncommented >>>
    370 #wdc0		at mainbus0		# A4000 & A1200 IDE bus
    371 #wd*		at wdc? drive ?		#  + drives
    372 #atapibus*	at wdc? channel ?	# ATAPI bus
    373 #cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    374 #sd*		at atapibus? drive ?	# ATAPI disk drives
    375 
    376 #pccard0		at mainbus0
    377 #pcmcia*		at pccard0
    378 #com*		at pcmcia? function ?		# Modems and serial cards
    379 #pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
    380 #aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
    381 ##wdc*		at pcmcia? function ?
    382 #awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
    383 ##ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    384 #mbe*		at pcmcia? function ?		# MB8696x based Ethernet
    385 #ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
    386 #sm*		at pcmcia? function ?		# Megahertz Ethernet
    387 #mhzc*		at pcmcia? function ?    # Megahertz Ethernet/Modem combo cards
    388 #com*		at mhzc?
    389 #sm*		at mhzc?
    390 
    391 #endif
    392 
    393 #ifdef DRACO_CONFIGURATION
    394 drsc0		at mainbus0		# DraCo scsi
    395 scsibus*	at drsc0
    396 #endif
    397 
    398 
    399 # each hard drive from low target to high
    400 # will configure to the next available sd unit number
    401 sd*	at scsibus? target ? lun ?	# scsi disks
    402 st*	at scsibus? target ? lun ?	# scsi tapes
    403 cd*	at scsibus? target ? lun ?	# scsi cds
    404 ss*	at scsibus? target ? lun ?	# scsi scanner
    405 ch*	at scsibus? target ? lun ?	# scsi autochangers
    406 uk*	at scsibus? target ? lun ?	# scsi unknown
    407 
    408 pseudo-device	loop			# loopback network interface
    409 pseudo-device	sl		1	# SLIP network interfaces
    410 pseudo-device	ppp		1	# PPP network interfaces
    411 pseudo-device	tun		1	# network tunnel line discipline
    412 #pseudo-device	gre		2	# generic L3 over IP tunnel
    413 #pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    414 pseudo-device	bpfilter	16	# Berkeley packet filter
    415 pseudo-device	ipfilter		# IP Filter package
    416 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    417 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    418 
    419 pseudo-device	view		4	# views (needed for grfcc)
    420 pseudo-device	pty		16	# pseudo ptys
    421 
    422 pseudo-device	vnd		4	# vnode pseudo-disks
    423 pseudo-device	ccd		4	# concatenated disk devices
    424 #pseudo-device	raid		4	# RAIDframe disk driver
    425 #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    426 
    427 # rnd is EXPERIMENTAL at this point.
    428 #pseudo-device  rnd                     # /dev/random and in-kernel generator
    429 #options        RND_COM                 # use "com" randomness as well (BROKEN)
    430 
    431 config	netbsd root on ? type ?
    432