Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.155
      1 #	$NetBSD: GENERIC,v 1.155 2001/01/21 20:38:20 is Exp $
      2 
      3 #
      4 #if 0
      5 # GENERIC Amiga or DraCo
      6 #
      7 # This configuration file contains all possible options
      8 #
      9 # make AMIGA extracts the AMIGA configuration file.
     10 # make DRACO extracts the DRACO configuration file.
     11 # make INSTALL extracts the INSTALL configuration file.
     12 #
     13 # commit them, too.
     14 #endif
     15 #
     16 
     17 include "arch/amiga/conf/std.amiga"
     18 
     19 #ident 		"GENERIC-$Revision: 1.155 $"
     20 
     21 #ifdef INSTALL_CONFIGURATION
     22 makeoptions	COPTS="-Os"
     23 #endif
     24 
     25 maxusers	8
     26 options 	RTC_OFFSET=0
     27 
     28 #
     29 # mainboards to support (in addition to Amiga)
     30 #
     31 #ifdef DRACO_CONFIGURATION
     32 options 	DRACO
     33 
     34 #endif
     35 #ifdef AMIGA_CONFIGURATION
     36 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     37 				# MC68060 with an OS ROM up to (at least) 
     38 				# V40 (OS3.1) and want to boot with the
     39 				# bootblock.
     40 				# You do not need this if you have a DraCo,
     41 				# have no 68060 or NEVER use the bootblock
     42 options		P5PPC68KBOARD	# Phase5 PPC/68K board support
     43 #endif
     44 #
     45 # processors this kernel should support
     46 #
     47 options 	M68060		# support for 060
     48 options 	M060SP		# MC68060 software support (Required for 060)
     49 #ifdef AMIGA_CONFIGURATION
     50 options 	M68040		# support for 040
     51 options 	FPSP		# MC68040 floating point support
     52 options 	M68030		# support for 030
     53 options 	M68020		# support for 020/851
     54 options 	FPU_EMULATE	# FPU emulation
     55 #endif
     56 
     57 #
     58 # Networking options
     59 #
     60 options 	INET		# IP networking support (Required)
     61 options 	INET6		# IPV6
     62 #options 	IPSEC		# IP security
     63 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     64 #options 	IPSEC_DEBUG	# debug for IP security
     65 #options 	GATEWAY		# Packet forwarding
     66 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     67 
     68 #ifndef INSTALL_CONFIGURATION
     69 #options 	MROUTING	# Multicast routing
     70 options 	NS		# XNS
     71 #options 	NSIP		# XNS tunneling over IP
     72 options 	ISO,TPIP	# OSI
     73 #options 	EON		# OSI tunneling over IP
     74 options 	CCITT,LLC,HDLC	# X.25
     75 options 	NETATALK	# AppleTalk networking protocols
     76 #endif
     77 
     78 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     79 options 	PPP_DEFLATE	# Deflate compression support for PPP
     80 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     81 options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     82 options 	IPFILTER_LOG	# ipmon(8) log support
     83 
     84 # Filesystems
     85 file-system 	FFS		# Berkeley fast file system
     86 file-system 	EXT2FS		# second extended file system (linux)
     87 #file-system 	LFS		# log-structured filesystem (experimental)
     88 
     89 #ifndef INSTALL_CONFIGURATION
     90 file-system 	MFS		# Memory based filesystem
     91 #endif
     92 
     93 file-system 	NFS		# Network File System client side code
     94 file-system 	ADOSFS		# AmigaDOS file system
     95 file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
     96 file-system 	MSDOSFS		# MS-DOS filesystem
     97 
     98 file-system 	KERNFS		# kernel data-structure filesystem
     99 
    100 #ifndef INSTALL_CONFIGURATION
    101 file-system 	FDESC		# user file descriptor filesystem
    102 file-system 	NULLFS		# loopback filesystem
    103 file-system 	OVERLAY		# overlay filesystem
    104 #file-system 	PORTAL		# Portal filesystem
    105 file-system 	PROCFS		# /proc filesystem
    106 file-system 	UMAPFS		# NULLFS + uid and gid remapping
    107 file-system 	UNION		# union filesystem
    108 #endif
    109 
    110 # Filesystem options
    111 
    112 #options 	FFS_EI		# FFS Endian Independant support
    113 
    114 #ifndef INSTALL_CONFIGURATION
    115 options 	QUOTA		# User and group quotas in FFS
    116 options 	SOFTDEP         # FFS soft updates support.
    117 options 	NFSSERVER	# Network File System server side code
    118 #endif
    119 
    120 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    121 				# immutable) behave as system flags.
    122 
    123 #
    124 # Compatability options for various existing systems
    125 #
    126 
    127 #ifndef INSTALL_CONFIGURATION
    128 options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
    129 options 	COMPAT_43	# compatibility with 4.3BSD interfaces
    130 options 	COMPAT_09	# compatibility with NetBSD 0.9
    131 options 	COMPAT_10	# compatibility with NetBSD 1.0
    132 options 	COMPAT_12	# compatibility with NetBSD 1.2
    133 options 	COMPAT_13	# compatibility with NetBSD 1.3
    134 options 	COMPAT_14	# compatibility with NetBSD 1.4
    135 options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
    136 options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
    137 options 	COMPAT_NOMID	# allow nonvalid machine id executables
    138 #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
    139 options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
    140 #endif
    141 
    142 #ifndef INSTALL_CONFIGURATION
    143 #
    144 # Support for System V IPC facilities.
    145 #
    146 options 	SYSVSHM		# System V-like shared memory
    147 options 	SYSVMSG		# System V-like messages
    148 options 	SYSVSEM		# System V-like semaphores
    149 #endif
    150 
    151 #
    152 # Support for various kernel options
    153 #
    154 
    155 #ifndef INSTALL_CONFIGURATION
    156 options 	KTRACE		# system call tracing support
    157 options 	LKM		# Loadable kernel modules
    158 options 	UCONSOLE	# anyone can redirect a virtual console
    159 #endif
    160 
    161 #options 	INSECURE	# allow, among other insecure stuff, LKM 
    162 				# loading in multi-user mode.
    163 options 	SCSIVERBOSE	# Verbose SCSI errors
    164 
    165 #ifndef INSTALL_CONFIGURATION
    166 options 	NTP		# NTP phase/frequency locked loop
    167 #endif
    168 
    169 #
    170 # Misc. debugging options
    171 #
    172 options 	DDB		# Kernel debugger
    173 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    174 options 	DIAGNOSTIC	# Extra kernel sanity checks
    175 #options 	DEBUG		# Enable misc. kernel debugging code
    176 #options 	SYSCALL_DEBUG	# debug all syscalls.
    177 #options 	SCSIDEBUG	# Add SCSI debugging statements
    178 #options 	PANICBUTTON	# Forced crash via keypress (???)
    179 
    180 #
    181 # Amiga specific options
    182 #
    183 #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    184 				# first bank of RAM. (default: unlimited)
    185 #options	NKPTADD=4	# set this for 4 additional KPT pages
    186 #options	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    187 				# per 16 MB (1<<24 bytes) of RAM
    188                                 # define and decrease this, or define and
    189                                 # increase NKPTADD if you get "out of PT pages"
    190                                 # panics.
    191 
    192 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    193 # before the 10 secondinterval ends, or that KBDRESET does work at all.
    194 #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    195 
    196 # These options improve performance with the built-in serial port
    197 # on slower Amigas.  Try the larger buffers first then lev6_defer.
    198 #options 	SERIBUF_SIZE=4096
    199 #options 	SEROBUF_SIZE=32
    200 #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    201 
    202 options 	RETINACONSOLE	# enable code to allow retina to be console
    203 #ifdef AMIGA_CONFIGURATION
    204 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    205 options 	CL5426CONSOLE	# Cirrus console
    206 options 	CV64CONSOLE	# CyberVision console
    207 options 	TSENGCONSOLE	# Tseng console
    208 options 	CV3DCONSOLE	# CyberVision 64/3D console
    209 #endif
    210 
    211 #ifdef AMIGA_CONFIGURATION
    212 options 	GRF_ECS		# Enhanced Chip Set
    213 options 	GRF_NTSC	# NTSC
    214 options 	GRF_PAL		# PAL
    215 options 	GRF_A2024	# Support for the A2024
    216 options 	GRF_AGA		# AGA Chip Set
    217 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    218 options 	GRF_SUPER72	# AGA Super-72
    219 #endif
    220 #options 	KFONT_8X11	# 8x11 font
    221 
    222 # This is how you would tell the kernel the A2410 oscillator frequencies:
    223 # The used frequencies are the defaults, and do not need option setting
    224 #options 	ULOWELL_OSC1=36000000
    225 #options 	ULOWELL_OSC2=66667000
    226 
    227 # This is how you specify the blitting speed, higher values may speed up blits
    228 # a littel bit.  If you raise this value too much some trash may appear.
    229 # the commented version is the default.
    230 #options 	RH_MEMCLK=61000000
    231 # this option enables the 64 bit sprite which does not work
    232 # for quite a few people.  E.g. The cursor sprite will turn to a block
    233 # when moved to the top of the screen in X.
    234 #options 	RH_64BIT_SPRITE
    235 # enables fast scroll code appears to now work on 040 systems.
    236 #options 	RETINA_SPEED_HACK
    237 # enables the Hardwarecursor which does not work on some systems.
    238 #options 	RH_HARDWARECURSOR
    239 
    240 #ifdef AMIGA_CONFIGURATION
    241 grfcc0		at mainbus0		# custom chips
    242 grfrt0		at zbus0		# retina II
    243 #endif
    244 grfrh0		at zbus0		# retina III
    245 #ifdef AMIGA_CONFIGURATION
    246 grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
    247 grful0		at zbus0		# A2410
    248 grfcv0		at zbus0		# CyberVision 64
    249 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    250 grfcv3d0	at zbus0		# CyberVision 64/3D
    251 #endif
    252 
    253 #ifdef AMIGA_CONFIGURATION
    254 grf0		at grfcc0
    255 grf1		at grfrt0
    256 #endif
    257 grf2		at grfrh0
    258 #ifdef AMIGA_CONFIGURATION
    259 grf3		at grfcl?
    260 grf4		at grful0
    261 grf5		at grfcv0
    262 grf6		at grfet?
    263 grf7		at grfcv3d0
    264 #endif
    265 #ifdef AMIGA_CONFIGURATION
    266 ite0		at grf0			# terminal emulators for grfs
    267 ite1		at grf1			# terminal emulators for grfs
    268 #endif
    269 ite2		at grf2			# terminal emulators for grfs
    270 #ifdef AMIGA_CONFIGURATION
    271 ite3		at grf3			# terminal emulators for grfs
    272 ite4		at grf4			# terminal emulators for grfs
    273 ite5		at grf5			# terminal emulators for grfs
    274 ite6		at grf6			# terminal emulators for grfs
    275 ite7		at grf7			# terminal emulators for grfs
    276 #endif
    277 
    278 msc0		at zbus0		# A2232 MSC multiport serial.
    279 mfc0		at zbus0		# MultiFaceCard I/O board
    280 mfcs0		at mfc0 unit 0		# MFC serial
    281 mfcs1		at mfc0 unit 1		# MFC serial
    282 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    283 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    284 #mfcs2		at mfc1 unit 0
    285 #mfcs3		at mfc1 unit 1
    286 #mfcp1		at mfc1 unit 0
    287 
    288 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    289 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    290 com*		at hyper? port ?	# Hypercom3/4 serial ports
    291 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    292 
    293 # not enabled yet... needs more testing and clock frequency autodetection
    294 #iobl*		at zbus?		# zbus IOBlix
    295 #com*		at iobl? port ?		# IOBlix serial ports
    296 #lpt*		at iobl? port ?		# IOBlix parallel ports
    297 
    298 #ifdef AMIGA_CONFIGURATION
    299 #
    300 # Amiga Mainboard devices (sans graphics and keyboard)
    301 #
    302 
    303 ser0		at mainbus0		# Amiga onboard serial
    304 par0		at mainbus0		# Amiga onboard parallel
    305 ms*		at mainbus0		# Amiga mice
    306 fdc0		at mainbus0		# Amiga FDC
    307 fd*		at fdc0 unit ?		# floppy disks on the later
    308 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    309 a2kbbc0 	at mainbus0		# A2000 battery backed clock
    310 aucc*		at mainbus0		# Amiga CC audio
    311 audio*		at aucc?
    312 #endif
    313 
    314 #ifdef DRACO_CONFIGURATION
    315 #
    316 # DraCo Mainboard devices (sans keyboard)
    317 #
    318 
    319 drbbc0		at mainbus0		# DraCo battery backed clock
    320 drsupio0	at mainbus0		# DraCo superio chip
    321 com*		at drsupio? port ?	# DraCo serial
    322 lpt0		at drsupio? port ?	# DraCo parallel
    323 #endif
    324 
    325 #
    326 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    327 #
    328 
    329 #ifndef DRACO_CONFIGURATION
    330 # Alas, Melody-Z2 dont configure in the DraCo bus. 
    331 melody* 	at zbus0		# Melody MPEG audio decoder
    332 audio*		at melody?
    333 #endif
    334 
    335 # Ethernet cards:
    336 le*		at zbus0		# A2065, Ameristar, Ariadne
    337 ne*		at zbus0		# AriadneII, X-surf
    338 ed*		at zbus0		# Hydra, ASDG LanRover
    339 es*		at zbus0		# CEI A4066 EthernetPLUS
    340 qn*		at zbus0		# Quicknet
    341 
    342 # Arcnet
    343 bah*		at zbus0		# C=/Ameristar A2060 / 560
    344 
    345 #ifdef AMIGA_CONFIGURATION
    346 # Greater Valley Product Bus
    347 gvpbus* 	at zbus0
    348 
    349 # scsi stuff, all possible
    350 gtsc0		at gvpbus?		# GVP series II scsi
    351 scsibus*	at gtsc0
    352 ahsc0		at mainbus0		# A3000 scsi
    353 scsibus*	at ahsc0
    354 atzsc0		at zbus0		# A2091 scsi
    355 scsibus*	at atzsc0
    356 wstsc0		at zbus0		# Wordsync II scsi
    357 scsibus*	at wstsc0
    358 ivsc0		at zbus0		# IVS scsi
    359 scsibus*	at ivsc0
    360 mlhsc0		at zbus0		# Hacker scsi
    361 scsibus*	at mlhsc0
    362 otgsc0		at zbus0		# 12 gauge scsi
    363 scsibus*	at otgsc0
    364 zssc0		at zbus0		# Zeus scsi
    365 scsibus*	at zssc0
    366 mgnsc0		at zbus0		# Magnum scsi
    367 scsibus*	at mgnsc0
    368 wesc0		at zbus0		# Warp Engine scsi
    369 scsibus*	at wesc0
    370 afsc0		at zbus0		# A4091 scsi
    371 scsibus*	at afsc0
    372 aftsc0		at mainbus0		# A4000T scsi
    373 scsibus*	at aftsc0
    374 flsc0		at zbus0		# FastlaneZ3 scsi
    375 scsibus*	at flsc0
    376 bzsc0		at zbus0		# Blizzard 1230 I,II scsi 
    377 scsibus*	at bzsc0
    378 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi 
    379 scsibus*	at bzivsc0
    380 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    381 scsibus*	at bztzsc0
    382 cbsc0		at zbus0		# CyberSCSI I
    383 scsibus*	at cbsc0
    384 cbiisc0 	at zbus0		# CyberSCSI II
    385 scsibus*	at cbiisc0
    386 cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    387 scsibus*	at cbiiisc0
    388 empsc0		at zbus0		# Emplant scsi
    389 scsibus*	at empsc0
    390 #idesc0		at mainbus0		# A4000 & A1200 IDE
    391 #scsibus*	at idesc0
    392 
    393 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
    394 # <<< are uncommented >>>
    395 wdc0		at mainbus0		# A4000 & A1200 IDE bus
    396 wd*		at wdc? drive ?		#  + drives
    397 atapibus*	at wdc? channel ?	# ATAPI bus
    398 cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    399 sd*		at atapibus? drive ?	# ATAPI disk drives
    400 
    401 pccard0		at mainbus0
    402 pcmcia*		at pccard0
    403 com*		at pcmcia? function ?		# Modems and serial cards
    404 pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
    405 aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
    406 wdc*		at pcmcia? function ?
    407 awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
    408 ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    409 mbe*		at pcmcia? function ?		# MB8696x based Ethernet
    410 ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
    411 sm*		at pcmcia? function ?		# Megahertz Ethernet
    412 mhzc*		at pcmcia? function ?    # Megahertz Ethernet/Modem combo cards
    413 com*		at mhzc?
    414 sm*		at mhzc?
    415 
    416 #endif
    417 
    418 #ifdef DRACO_CONFIGURATION
    419 drsc0		at mainbus0		# DraCo scsi
    420 scsibus*	at drsc0
    421 #endif
    422 
    423 
    424 # each hard drive from low target to high
    425 # will configure to the next available sd unit number
    426 sd*	at scsibus? target ? lun ?	# scsi disks
    427 st*	at scsibus? target ? lun ?	# scsi tapes
    428 cd*	at scsibus? target ? lun ?	# scsi cds
    429 ch*	at scsibus? target ? lun ?	# scsi autochangers
    430 #ifndef INSTALL_CONFIGURATION
    431 ss*	at scsibus? target ? lun ?	# scsi scanner
    432 uk*	at scsibus? target ? lun ?	# scsi unknown
    433 #endif
    434 
    435 pseudo-device	loop			# loopback network interface
    436 pseudo-device	sl		1	# SLIP network interfaces
    437 pseudo-device	ppp		1	# PPP network interfaces
    438 pseudo-device	tun		1	# network tunnel line discipline
    439 #pseudo-device	gre		2	# generic L3 over IP tunnel
    440 #pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    441 pseudo-device	bpfilter	16	# Berkeley packet filter
    442 pseudo-device	ipfilter		# IP Filter package
    443 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    444 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    445 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    446 pseudo-device	vlan			# IEEE 802.1q encapsulation
    447 
    448 pseudo-device	view		4	# views (needed for grfcc)
    449 pseudo-device	pty			# pseudo-terminals
    450 
    451 pseudo-device	vnd		4	# vnode pseudo-disks
    452 pseudo-device	ccd		4	# concatenated disk devices
    453 #pseudo-device	raid		4	# RAIDframe disk driver
    454 #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    455 
    456 pseudo-device  rnd                     # /dev/random and in-kernel generator
    457 #options        RND_COM                 # use "com" randomness as well (BROKEN)
    458 
    459 config	netbsd root on ? type ?
    460