GENERIC revision 1.156
1# $NetBSD: GENERIC,v 1.156 2001/02/02 21:52:13 is Exp $ 2 3# 4#if 0 5# GENERIC Amiga or DraCo 6# 7# This configuration file contains all possible options 8# 9# make AMIGA extracts the AMIGA configuration file. 10# make DRACO extracts the DRACO configuration file. 11# make INSTALL extracts the INSTALL configuration file. 12# 13# commit them, too. 14#endif 15# 16 17include "arch/amiga/conf/std.amiga" 18 19#ident "GENERIC-$Revision: 1.156 $" 20 21#ifdef INSTALL_CONFIGURATION 22makeoptions COPTS="-Os" 23#endif 24 25maxusers 8 26options RTC_OFFSET=0 27 28# 29# mainboards to support (in addition to Amiga) 30# 31#ifdef DRACO_CONFIGURATION 32options DRACO 33 34#endif 35#ifdef AMIGA_CONFIGURATION 36options BB060STUPIDROM # You need this, if you have a non-DraCo 37 # MC68060 with an OS ROM up to (at least) 38 # V40 (OS3.1) and want to boot with the 39 # bootblock. 40 # You do not need this if you have a DraCo, 41 # have no 68060 or NEVER use the bootblock 42options P5PPC68KBOARD # Phase5 PPC/68K board support 43#endif 44# 45# processors this kernel should support 46# 47options M68060 # support for 060 48options M060SP # MC68060 software support (Required for 060) 49#ifdef AMIGA_CONFIGURATION 50options M68040 # support for 040 51options FPSP # MC68040 floating point support 52options M68030 # support for 030 53options M68020 # support for 020/851 54options FPU_EMULATE # FPU emulation 55#endif 56 57# 58# Networking options 59# 60options INET # IP networking support (Required) 61options INET6 # IPV6 62#options IPSEC # IP security 63#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 64#options IPSEC_DEBUG # debug for IP security 65#options GATEWAY # Packet forwarding 66#options DIRECTED_BROADCAST # Broadcast across subnets 67 68#ifndef INSTALL_CONFIGURATION 69#options MROUTING # Multicast routing 70options NS # XNS 71#options NSIP # XNS tunneling over IP 72options ISO,TPIP # OSI 73#options EON # OSI tunneling over IP 74options CCITT,LLC,HDLC # X.25 75options NETATALK # AppleTalk networking protocols 76#endif 77 78options PPP_BSDCOMP # BSD-Compress compression support for PPP 79options PPP_DEFLATE # Deflate compression support for PPP 80options PPP_FILTER # Active filter support for PPP (requires bpf) 81options PFIL_HOOKS # pfil(9) packet filter hooks 82options IPFILTER_LOG # ipmon(8) log support 83 84# Filesystems 85file-system FFS # Berkeley fast file system 86file-system EXT2FS # second extended file system (linux) 87#file-system LFS # log-structured filesystem (experimental) 88 89#ifndef INSTALL_CONFIGURATION 90file-system MFS # Memory based filesystem 91#endif 92 93file-system NFS # Network File System client side code 94file-system ADOSFS # AmigaDOS file system 95file-system CD9660 # ISO 9660 + Rock Ridge filesystem 96file-system MSDOSFS # MS-DOS filesystem 97 98file-system KERNFS # kernel data-structure filesystem 99 100#ifndef INSTALL_CONFIGURATION 101file-system FDESC # user file descriptor filesystem 102file-system NULLFS # loopback filesystem 103file-system OVERLAY # overlay filesystem 104#file-system PORTAL # Portal filesystem 105file-system PROCFS # /proc filesystem 106file-system UMAPFS # NULLFS + uid and gid remapping 107file-system UNION # union filesystem 108#endif 109 110# Filesystem options 111 112#options FFS_EI # FFS Endian Independant support 113 114#ifndef INSTALL_CONFIGURATION 115options QUOTA # User and group quotas in FFS 116options SOFTDEP # FFS soft updates support. 117options NFSSERVER # Network File System server side code 118#endif 119 120#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 121 # immutable) behave as system flags. 122 123# 124# Compatability options for various existing systems 125# 126 127#ifndef INSTALL_CONFIGURATION 128options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 129options COMPAT_43 # compatibility with 4.3BSD interfaces 130options COMPAT_09 # compatibility with NetBSD 0.9 131options COMPAT_10 # compatibility with NetBSD 1.0 132options COMPAT_12 # compatibility with NetBSD 1.2 133options COMPAT_13 # compatibility with NetBSD 1.3 134options COMPAT_14 # compatibility with NetBSD 1.4 135options COMPAT_SUNOS # Support to run Sun (m68k) executables 136options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 137options COMPAT_NOMID # allow nonvalid machine id executables 138#options COMPAT_LINUX # Support to run Linux/m68k executables 139options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 140#endif 141 142#ifndef INSTALL_CONFIGURATION 143# 144# Support for System V IPC facilities. 145# 146options SYSVSHM # System V-like shared memory 147options SYSVMSG # System V-like messages 148options SYSVSEM # System V-like semaphores 149#endif 150 151# 152# Support for various kernel options 153# 154 155#ifndef INSTALL_CONFIGURATION 156options KTRACE # system call tracing support 157options LKM # Loadable kernel modules 158options UCONSOLE # anyone can redirect a virtual console 159#endif 160 161#options INSECURE # allow, among other insecure stuff, LKM 162 # loading in multi-user mode. 163options SCSIVERBOSE # Verbose SCSI errors 164 165#ifndef INSTALL_CONFIGURATION 166options NTP # NTP phase/frequency locked loop 167#endif 168 169# 170# Misc. debugging options 171# 172options DDB # Kernel debugger 173#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 174options DIAGNOSTIC # Extra kernel sanity checks 175#options DEBUG # Enable misc. kernel debugging code 176#options SYSCALL_DEBUG # debug all syscalls. 177#options SCSIDEBUG # Add SCSI debugging statements 178#options PANICBUTTON # Forced crash via keypress (???) 179 180# 181# Amiga specific options 182# 183#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 184 # first bank of RAM. (default: unlimited) 185#options NKPTADD=4 # set this for 4 additional KPT pages 186#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 187 # per 16 MB (1<<24 bytes) of RAM 188 # define and decrease this, or define and 189 # increase NKPTADD if you get "out of PT pages" 190 # panics. 191 192# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 193# before the 10 secondinterval ends, or that KBDRESET does work at all. 194#options KBDRESET # sync on Ctrl-Amiga-Amiga 195 196# These options improve performance with the built-in serial port 197# on slower Amigas. Try the larger buffers first then lev6_defer. 198#options SERIBUF_SIZE=4096 199#options SEROBUF_SIZE=32 200#options LEV6_DEFER # defers l6 to l4 (below serial l5) 201 202options RETINACONSOLE # enable code to allow retina to be console 203#ifdef AMIGA_CONFIGURATION 204options ULOWELLCONSOLE # enable code to allow a2410 to be console 205options CL5426CONSOLE # Cirrus console 206options CV64CONSOLE # CyberVision console 207options TSENGCONSOLE # Tseng console 208options CV3DCONSOLE # CyberVision 64/3D console 209#endif 210 211#ifdef AMIGA_CONFIGURATION 212options GRF_ECS # Enhanced Chip Set 213options GRF_NTSC # NTSC 214options GRF_PAL # PAL 215options GRF_A2024 # Support for the A2024 216options GRF_AGA # AGA Chip Set 217options GRF_AGA_VGA # AGA VGAONLY timing 218options GRF_SUPER72 # AGA Super-72 219#endif 220#options KFONT_8X11 # 8x11 font 221 222# This is how you would tell the kernel the A2410 oscillator frequencies: 223# The used frequencies are the defaults, and do not need option setting 224#options ULOWELL_OSC1=36000000 225#options ULOWELL_OSC2=66667000 226 227# This is how you specify the blitting speed, higher values may speed up blits 228# a littel bit. If you raise this value too much some trash may appear. 229# the commented version is the default. 230#options RH_MEMCLK=61000000 231# this option enables the 64 bit sprite which does not work 232# for quite a few people. E.g. The cursor sprite will turn to a block 233# when moved to the top of the screen in X. 234#options RH_64BIT_SPRITE 235# enables fast scroll code appears to now work on 040 systems. 236#options RETINA_SPEED_HACK 237# enables the Hardwarecursor which does not work on some systems. 238#options RH_HARDWARECURSOR 239 240#ifdef AMIGA_CONFIGURATION 241# wscons aware interface to amiga custom chips. Text-only console. 242# If you enable it enable also wskbd. 243# 244#amidisplaycc0 at mainbus0 # wscons interface to custom chips 245#wsdisplay0 at amidisplaycc0 console ? 246#options WSEMUL_VT100 247#endif 248 249#ifdef AMIGA_CONFIGURATION 250grfcc0 at mainbus0 # custom chips 251grfrt0 at zbus0 # retina II 252#endif 253grfrh0 at zbus0 # retina III 254#ifdef AMIGA_CONFIGURATION 255grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 256grful0 at zbus0 # A2410 257grfcv0 at zbus0 # CyberVision 64 258grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 259grfcv3d0 at zbus0 # CyberVision 64/3D 260#endif 261 262#ifdef AMIGA_CONFIGURATION 263grf0 at grfcc0 264grf1 at grfrt0 265#endif 266grf2 at grfrh0 267#ifdef AMIGA_CONFIGURATION 268grf3 at grfcl? 269grf4 at grful0 270grf5 at grfcv0 271grf6 at grfet? 272grf7 at grfcv3d0 273#endif 274#ifdef AMIGA_CONFIGURATION 275ite0 at grf0 # terminal emulators for grfs 276ite1 at grf1 # terminal emulators for grfs 277#endif 278ite2 at grf2 # terminal emulators for grfs 279#ifdef AMIGA_CONFIGURATION 280ite3 at grf3 # terminal emulators for grfs 281ite4 at grf4 # terminal emulators for grfs 282ite5 at grf5 # terminal emulators for grfs 283ite6 at grf6 # terminal emulators for grfs 284ite7 at grf7 # terminal emulators for grfs 285#endif 286 287msc0 at zbus0 # A2232 MSC multiport serial. 288mfc0 at zbus0 # MultiFaceCard I/O board 289mfcs0 at mfc0 unit 0 # MFC serial 290mfcs1 at mfc0 unit 1 # MFC serial 291#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 292#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 293#mfcs2 at mfc1 unit 0 294#mfcs3 at mfc1 unit 1 295#mfcp1 at mfc1 unit 0 296 297hyper* at zbus? # zbus HyperCom3/3+/4/4+ 298#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 299com* at hyper? port ? # Hypercom3/4 serial ports 300lpt* at hyper? port ? # Hypercom3+/4+ parallel port 301 302# not enabled yet... needs more testing and clock frequency autodetection 303#iobl* at zbus? # zbus IOBlix 304#com* at iobl? port ? # IOBlix serial ports 305#lpt* at iobl? port ? # IOBlix parallel ports 306 307 308# 309# Keyboard device. Optionally can attach a wskbd. 310# wskbd works together with a wsdisplay so enable them both if you will. 311# Don't enable wskbd if you use ite. 312# 313# XXX in std.amiga: kbd0 at mainbus0 314#wskbd0 at kbd0 console ? 315 316 317#ifdef AMIGA_CONFIGURATION 318# 319# Amiga Mainboard devices (sans graphics and keyboard) 320# 321 322ser0 at mainbus0 # Amiga onboard serial 323par0 at mainbus0 # Amiga onboard parallel 324ms* at mainbus0 # Amiga mice 325fdc0 at mainbus0 # Amiga FDC 326fd* at fdc0 unit ? # floppy disks on the later 327a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 328a2kbbc0 at mainbus0 # A2000 battery backed clock 329aucc* at mainbus0 # Amiga CC audio 330audio* at aucc? 331#endif 332 333#ifdef DRACO_CONFIGURATION 334# 335# DraCo Mainboard devices (sans keyboard) 336# 337 338drbbc0 at mainbus0 # DraCo battery backed clock 339drsupio0 at mainbus0 # DraCo superio chip 340com* at drsupio? port ? # DraCo serial 341lpt0 at drsupio? port ? # DraCo parallel 342#endif 343 344# 345# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 346# 347 348#ifndef DRACO_CONFIGURATION 349# Alas, Melody-Z2 dont configure in the DraCo bus. 350melody* at zbus0 # Melody MPEG audio decoder 351audio* at melody? 352#endif 353 354# Ethernet cards: 355le* at zbus0 # A2065, Ameristar, Ariadne 356ne* at zbus0 # AriadneII, X-surf 357ed* at zbus0 # Hydra, ASDG LanRover 358es* at zbus0 # CEI A4066 EthernetPLUS 359qn* at zbus0 # Quicknet 360 361# Arcnet 362bah* at zbus0 # C=/Ameristar A2060 / 560 363 364#ifdef AMIGA_CONFIGURATION 365# Greater Valley Product Bus 366gvpbus* at zbus0 367 368# scsi stuff, all possible 369gtsc0 at gvpbus? # GVP series II scsi 370scsibus* at gtsc0 371ahsc0 at mainbus0 # A3000 scsi 372scsibus* at ahsc0 373atzsc0 at zbus0 # A2091 scsi 374scsibus* at atzsc0 375wstsc0 at zbus0 # Wordsync II scsi 376scsibus* at wstsc0 377ivsc0 at zbus0 # IVS scsi 378scsibus* at ivsc0 379mlhsc0 at zbus0 # Hacker scsi 380scsibus* at mlhsc0 381otgsc0 at zbus0 # 12 gauge scsi 382scsibus* at otgsc0 383zssc0 at zbus0 # Zeus scsi 384scsibus* at zssc0 385mgnsc0 at zbus0 # Magnum scsi 386scsibus* at mgnsc0 387wesc0 at zbus0 # Warp Engine scsi 388scsibus* at wesc0 389afsc0 at zbus0 # A4091 scsi 390scsibus* at afsc0 391aftsc0 at mainbus0 # A4000T scsi 392scsibus* at aftsc0 393flsc0 at zbus0 # FastlaneZ3 scsi 394scsibus* at flsc0 395bzsc0 at zbus0 # Blizzard 1230 I,II scsi 396scsibus* at bzsc0 397bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 398scsibus* at bzivsc0 399bztzsc0 at zbus0 # Blizzard 2060 scsi 400scsibus* at bztzsc0 401cbsc0 at zbus0 # CyberSCSI I 402scsibus* at cbsc0 403cbiisc0 at zbus0 # CyberSCSI II 404scsibus* at cbiisc0 405cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 406scsibus* at cbiiisc0 407empsc0 at zbus0 # Emplant scsi 408scsibus* at empsc0 409#idesc0 at mainbus0 # A4000 & A1200 IDE 410#scsibus* at idesc0 411 412# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 413# <<< are uncommented >>> 414wdc0 at mainbus0 # A4000 & A1200 IDE bus 415wd* at wdc? drive ? # + drives 416atapibus* at wdc? channel ? # ATAPI bus 417cd* at atapibus? drive ? # ATAPI CD-ROM drives 418sd* at atapibus? drive ? # ATAPI disk drives 419 420pccard0 at mainbus0 421pcmcia* at pccard0 422com* at pcmcia? function ? # Modems and serial cards 423pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 424aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 425wdc* at pcmcia? function ? 426awi* at pcmcia? function ? # BayStack 650 (802.11FH) 427ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 428mbe* at pcmcia? function ? # MB8696x based Ethernet 429ne* at pcmcia? function ? # NE2000-compatible Ethernet 430sm* at pcmcia? function ? # Megahertz Ethernet 431mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 432com* at mhzc? 433sm* at mhzc? 434 435#endif 436 437#ifdef DRACO_CONFIGURATION 438drsc0 at mainbus0 # DraCo scsi 439scsibus* at drsc0 440#endif 441 442 443# each hard drive from low target to high 444# will configure to the next available sd unit number 445sd* at scsibus? target ? lun ? # scsi disks 446st* at scsibus? target ? lun ? # scsi tapes 447cd* at scsibus? target ? lun ? # scsi cds 448ch* at scsibus? target ? lun ? # scsi autochangers 449#ifndef INSTALL_CONFIGURATION 450ss* at scsibus? target ? lun ? # scsi scanner 451uk* at scsibus? target ? lun ? # scsi unknown 452#endif 453 454pseudo-device loop # loopback network interface 455pseudo-device sl 1 # SLIP network interfaces 456pseudo-device ppp 1 # PPP network interfaces 457pseudo-device tun 1 # network tunnel line discipline 458#pseudo-device gre 2 # generic L3 over IP tunnel 459#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 460pseudo-device bpfilter 16 # Berkeley packet filter 461pseudo-device ipfilter # IP Filter package 462pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 463#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 464#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 465pseudo-device vlan # IEEE 802.1q encapsulation 466 467pseudo-device view 4 # views (needed for grfcc) 468pseudo-device pty # pseudo-terminals 469 470pseudo-device vnd 4 # vnode pseudo-disks 471pseudo-device ccd 4 # concatenated disk devices 472#pseudo-device raid 4 # RAIDframe disk driver 473#options RAID_AUTOCONFIG # auto-configuration of RAID components 474 475pseudo-device rnd # /dev/random and in-kernel generator 476#options RND_COM # use "com" randomness as well (BROKEN) 477 478config netbsd root on ? type ? 479