GENERIC revision 1.157
1 # $NetBSD: GENERIC,v 1.157 2001/03/10 23:55:31 is Exp $ 2 3 # 4 #if 0 5 # GENERIC Amiga or DraCo 6 # 7 # This configuration file contains all possible options 8 # 9 # make AMIGA extracts the AMIGA configuration file. 10 # make DRACO extracts the DRACO configuration file. 11 # make INSTALL extracts the INSTALL configuration file. 12 # 13 # commit them, too. 14 #endif 15 # 16 17 include "arch/amiga/conf/std.amiga" 18 19 #ident "GENERIC-$Revision: 1.157 $" 20 21 #ifdef INSTALL_CONFIGURATION 22 makeoptions COPTS="-Os" 23 #endif 24 25 maxusers 8 26 options RTC_OFFSET=0 27 28 # 29 # mainboards to support (in addition to Amiga) 30 # 31 #ifdef DRACO_CONFIGURATION 32 options DRACO 33 34 #endif 35 #ifdef AMIGA_CONFIGURATION 36 options BB060STUPIDROM # You need this, if you have a non-DraCo 37 # MC68060 with an OS ROM up to (at least) 38 # V40 (OS3.1) and want to boot with the 39 # bootblock. 40 # You do not need this if you have a DraCo, 41 # have no 68060 or NEVER use the bootblock 42 options P5PPC68KBOARD # Phase5 PPC/68K board support 43 #endif 44 # 45 # processors this kernel should support 46 # 47 options M68060 # support for 060 48 options M060SP # MC68060 software support (Required for 060) 49 #ifdef AMIGA_CONFIGURATION 50 options M68040 # support for 040 51 options FPSP # MC68040 floating point support 52 options M68030 # support for 030 53 options M68020 # support for 020/851 54 options FPU_EMULATE # FPU emulation 55 #endif 56 57 # 58 # Networking options 59 # 60 options INET # IP networking support (Required) 61 options INET6 # IPV6 62 #options IPSEC # IP security 63 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 64 #options IPSEC_DEBUG # debug for IP security 65 #options GATEWAY # Packet forwarding 66 #options DIRECTED_BROADCAST # Broadcast across subnets 67 68 #ifndef INSTALL_CONFIGURATION 69 #options MROUTING # Multicast routing 70 options NS # XNS 71 #options NSIP # XNS tunneling over IP 72 options ISO,TPIP # OSI 73 #options EON # OSI tunneling over IP 74 options CCITT,LLC,HDLC # X.25 75 options NETATALK # AppleTalk networking protocols 76 #endif 77 78 options PPP_BSDCOMP # BSD-Compress compression support for PPP 79 options PPP_DEFLATE # Deflate compression support for PPP 80 options PPP_FILTER # Active filter support for PPP (requires bpf) 81 options PFIL_HOOKS # pfil(9) packet filter hooks 82 options IPFILTER_LOG # ipmon(8) log support 83 84 # Filesystems 85 file-system FFS # Berkeley fast file system 86 file-system EXT2FS # second extended file system (linux) 87 #file-system LFS # log-structured filesystem (experimental) 88 89 #ifndef INSTALL_CONFIGURATION 90 file-system MFS # Memory based filesystem 91 #endif 92 93 file-system NFS # Network File System client side code 94 file-system ADOSFS # AmigaDOS file system 95 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 96 file-system MSDOSFS # MS-DOS filesystem 97 98 file-system KERNFS # kernel data-structure filesystem 99 100 #ifndef INSTALL_CONFIGURATION 101 file-system FDESC # user file descriptor filesystem 102 file-system NULLFS # loopback filesystem 103 file-system OVERLAY # overlay filesystem 104 #file-system PORTAL # Portal filesystem 105 file-system PROCFS # /proc filesystem 106 file-system UMAPFS # NULLFS + uid and gid remapping 107 file-system UNION # union filesystem 108 #endif 109 110 # Filesystem options 111 112 #options FFS_EI # FFS Endian Independant support 113 114 #ifndef INSTALL_CONFIGURATION 115 options QUOTA # User and group quotas in FFS 116 options SOFTDEP # FFS soft updates support. 117 options NFSSERVER # Network File System server side code 118 #endif 119 120 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 121 # immutable) behave as system flags. 122 123 # 124 # Compatability options for various existing systems 125 # 126 127 #ifndef INSTALL_CONFIGURATION 128 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 129 options COMPAT_43 # compatibility with 4.3BSD interfaces 130 options COMPAT_09 # compatibility with NetBSD 0.9 131 options COMPAT_10 # compatibility with NetBSD 1.0 132 options COMPAT_12 # compatibility with NetBSD 1.2 133 options COMPAT_13 # compatibility with NetBSD 1.3 134 options COMPAT_14 # compatibility with NetBSD 1.4 135 options COMPAT_SUNOS # Support to run Sun (m68k) executables 136 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 137 options COMPAT_NOMID # allow nonvalid machine id executables 138 #options COMPAT_LINUX # Support to run Linux/m68k executables 139 options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 140 #endif 141 142 #ifndef INSTALL_CONFIGURATION 143 # 144 # Support for System V IPC facilities. 145 # 146 options SYSVSHM # System V-like shared memory 147 options SYSVMSG # System V-like messages 148 options SYSVSEM # System V-like semaphores 149 #endif 150 151 # 152 # Support for various kernel options 153 # 154 155 #ifndef INSTALL_CONFIGURATION 156 options KTRACE # system call tracing support 157 options LKM # Loadable kernel modules 158 options UCONSOLE # anyone can redirect a virtual console 159 #endif 160 161 #options INSECURE # allow, among other insecure stuff, LKM 162 # loading in multi-user mode. 163 options SCSIVERBOSE # Verbose SCSI errors 164 165 #ifndef INSTALL_CONFIGURATION 166 options NTP # NTP phase/frequency locked loop 167 #endif 168 169 # 170 # Misc. debugging options 171 # 172 options DDB # Kernel debugger 173 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 174 options DIAGNOSTIC # Extra kernel sanity checks 175 #options DEBUG # Enable misc. kernel debugging code 176 #options SYSCALL_DEBUG # debug all syscalls. 177 #options SCSIDEBUG # Add SCSI debugging statements 178 #options PANICBUTTON # Forced crash via keypress (???) 179 180 # 181 # Amiga specific options 182 # 183 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 184 # first bank of RAM. (default: unlimited) 185 #options NKPTADD=4 # set this for 4 additional KPT pages 186 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 187 # per 16 MB (1<<24 bytes) of RAM 188 # define and decrease this, or define and 189 # increase NKPTADD if you get "out of PT pages" 190 # panics. 191 192 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 193 # before the 10 secondinterval ends, or that KBDRESET does work at all. 194 #options KBDRESET # sync on Ctrl-Amiga-Amiga 195 196 # These options improve performance with the built-in serial port 197 # on slower Amigas. Try the larger buffers first then lev6_defer. 198 #options SERIBUF_SIZE=4096 199 #options SEROBUF_SIZE=32 200 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 201 202 options RETINACONSOLE # enable code to allow retina to be console 203 #ifdef AMIGA_CONFIGURATION 204 options ULOWELLCONSOLE # enable code to allow a2410 to be console 205 options CL5426CONSOLE # Cirrus console 206 options CV64CONSOLE # CyberVision console 207 options TSENGCONSOLE # Tseng console 208 options CV3DCONSOLE # CyberVision 64/3D console 209 #endif 210 211 #ifdef AMIGA_CONFIGURATION 212 options GRF_ECS # Enhanced Chip Set 213 options GRF_NTSC # NTSC 214 options GRF_PAL # PAL 215 options GRF_A2024 # Support for the A2024 216 options GRF_AGA # AGA Chip Set 217 options GRF_AGA_VGA # AGA VGAONLY timing 218 options GRF_SUPER72 # AGA Super-72 219 #endif 220 #options KFONT_8X11 # 8x11 font 221 222 # This is how you would tell the kernel the A2410 oscillator frequencies: 223 # The used frequencies are the defaults, and do not need option setting 224 #options ULOWELL_OSC1=36000000 225 #options ULOWELL_OSC2=66667000 226 227 # This is how you specify the blitting speed, higher values may speed up blits 228 # a littel bit. If you raise this value too much some trash may appear. 229 # the commented version is the default. 230 #options RH_MEMCLK=61000000 231 # this option enables the 64 bit sprite which does not work 232 # for quite a few people. E.g. The cursor sprite will turn to a block 233 # when moved to the top of the screen in X. 234 #options RH_64BIT_SPRITE 235 # enables fast scroll code appears to now work on 040 systems. 236 #options RETINA_SPEED_HACK 237 # enables the Hardwarecursor which does not work on some systems. 238 #options RH_HARDWARECURSOR 239 240 #ifdef AMIGA_CONFIGURATION 241 # wscons aware interface to amiga custom chips. Text-only console. 242 # If you enable it enable also wskbd. 243 # 244 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 245 #wsdisplay0 at amidisplaycc0 console ? 246 #options WSEMUL_VT100 247 #endif 248 249 #ifdef AMIGA_CONFIGURATION 250 grfcc0 at mainbus0 # custom chips 251 grfrt0 at zbus0 # retina II 252 #endif 253 grfrh0 at zbus0 # retina III 254 #ifdef AMIGA_CONFIGURATION 255 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 256 grful0 at zbus0 # A2410 257 grfcv0 at zbus0 # CyberVision 64 258 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 259 grfcv3d0 at zbus0 # CyberVision 64/3D 260 #endif 261 262 #ifdef AMIGA_CONFIGURATION 263 grf0 at grfcc0 264 grf1 at grfrt0 265 #endif 266 grf2 at grfrh0 267 #ifdef AMIGA_CONFIGURATION 268 grf3 at grfcl? 269 grf4 at grful0 270 grf5 at grfcv0 271 grf6 at grfet? 272 grf7 at grfcv3d0 273 #endif 274 #ifdef AMIGA_CONFIGURATION 275 ite0 at grf0 # terminal emulators for grfs 276 ite1 at grf1 # terminal emulators for grfs 277 #endif 278 ite2 at grf2 # terminal emulators for grfs 279 #ifdef AMIGA_CONFIGURATION 280 ite3 at grf3 # terminal emulators for grfs 281 ite4 at grf4 # terminal emulators for grfs 282 ite5 at grf5 # terminal emulators for grfs 283 ite6 at grf6 # terminal emulators for grfs 284 ite7 at grf7 # terminal emulators for grfs 285 #endif 286 287 msc0 at zbus0 # A2232 MSC multiport serial. 288 mfc0 at zbus0 # MultiFaceCard I/O board 289 mfcs0 at mfc0 unit 0 # MFC serial 290 mfcs1 at mfc0 unit 1 # MFC serial 291 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 292 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 293 #mfcs2 at mfc1 unit 0 294 #mfcs3 at mfc1 unit 1 295 #mfcp1 at mfc1 unit 0 296 297 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 298 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 299 com* at hyper? port ? # Hypercom3/4 serial ports 300 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 301 302 #options IOBZCLOCK=22118400 # default, uncomment the next line 303 #options IOBZCLOCK=24000000 # if needed. 304 305 iobl* at zbus? # zbus IOBlix 306 com* at iobl? port ? # IOBlix serial ports 307 lpt* at iobl? port ? # IOBlix parallel ports 308 309 310 # 311 # Keyboard device. Optionally can attach a wskbd. 312 # wskbd works together with a wsdisplay so enable them both if you will. 313 # Don't enable wskbd if you use ite. 314 # 315 # XXX in std.amiga: kbd0 at mainbus0 316 #wskbd0 at kbd0 console ? 317 318 319 #ifdef AMIGA_CONFIGURATION 320 # 321 # Amiga Mainboard devices (sans graphics and keyboard) 322 # 323 324 ser0 at mainbus0 # Amiga onboard serial 325 par0 at mainbus0 # Amiga onboard parallel 326 ms* at mainbus0 # Amiga mice 327 fdc0 at mainbus0 # Amiga FDC 328 fd* at fdc0 unit ? # floppy disks on the later 329 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 330 a2kbbc0 at mainbus0 # A2000 battery backed clock 331 aucc* at mainbus0 # Amiga CC audio 332 audio* at aucc? 333 #endif 334 335 #ifdef DRACO_CONFIGURATION 336 # 337 # DraCo Mainboard devices (sans keyboard) 338 # 339 340 drbbc0 at mainbus0 # DraCo battery backed clock 341 drsupio0 at mainbus0 # DraCo superio chip 342 com* at drsupio? port ? # DraCo serial 343 lpt0 at drsupio? port ? # DraCo parallel 344 #endif 345 346 # 347 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 348 # 349 350 #ifndef DRACO_CONFIGURATION 351 # Alas, Melody-Z2 dont configure in the DraCo bus. 352 melody* at zbus0 # Melody MPEG audio decoder 353 audio* at melody? 354 #endif 355 356 # Ethernet cards: 357 le* at zbus0 # A2065, Ameristar, Ariadne 358 ne* at zbus0 # AriadneII, X-surf 359 ed* at zbus0 # Hydra, ASDG LanRover 360 es* at zbus0 # CEI A4066 EthernetPLUS 361 qn* at zbus0 # Quicknet 362 363 # Arcnet 364 bah* at zbus0 # C=/Ameristar A2060 / 560 365 366 #ifdef AMIGA_CONFIGURATION 367 # Greater Valley Product Bus 368 gvpbus* at zbus0 369 370 # scsi stuff, all possible 371 gtsc0 at gvpbus? # GVP series II scsi 372 scsibus* at gtsc0 373 ahsc0 at mainbus0 # A3000 scsi 374 scsibus* at ahsc0 375 atzsc0 at zbus0 # A2091 scsi 376 scsibus* at atzsc0 377 wstsc0 at zbus0 # Wordsync II scsi 378 scsibus* at wstsc0 379 ivsc0 at zbus0 # IVS scsi 380 scsibus* at ivsc0 381 mlhsc0 at zbus0 # Hacker scsi 382 scsibus* at mlhsc0 383 otgsc0 at zbus0 # 12 gauge scsi 384 scsibus* at otgsc0 385 zssc0 at zbus0 # Zeus scsi 386 scsibus* at zssc0 387 mgnsc0 at zbus0 # Magnum scsi 388 scsibus* at mgnsc0 389 wesc0 at zbus0 # Warp Engine scsi 390 scsibus* at wesc0 391 afsc0 at zbus0 # A4091 scsi 392 scsibus* at afsc0 393 aftsc0 at mainbus0 # A4000T scsi 394 scsibus* at aftsc0 395 flsc0 at zbus0 # FastlaneZ3 scsi 396 scsibus* at flsc0 397 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 398 scsibus* at bzsc0 399 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 400 scsibus* at bzivsc0 401 bztzsc0 at zbus0 # Blizzard 2060 scsi 402 scsibus* at bztzsc0 403 cbsc0 at zbus0 # CyberSCSI I 404 scsibus* at cbsc0 405 cbiisc0 at zbus0 # CyberSCSI II 406 scsibus* at cbiisc0 407 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 408 scsibus* at cbiiisc0 409 empsc0 at zbus0 # Emplant scsi 410 scsibus* at empsc0 411 #idesc0 at mainbus0 # A4000 & A1200 IDE 412 #scsibus* at idesc0 413 414 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 415 # <<< are uncommented >>> 416 wdc0 at mainbus0 # A4000 & A1200 IDE bus 417 wd* at wdc? drive ? # + drives 418 atapibus* at wdc? channel ? # ATAPI bus 419 cd* at atapibus? drive ? # ATAPI CD-ROM drives 420 sd* at atapibus? drive ? # ATAPI disk drives 421 422 pccard0 at mainbus0 423 pcmcia* at pccard0 424 com* at pcmcia? function ? # Modems and serial cards 425 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 426 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 427 wdc* at pcmcia? function ? 428 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 429 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 430 mbe* at pcmcia? function ? # MB8696x based Ethernet 431 ne* at pcmcia? function ? # NE2000-compatible Ethernet 432 sm* at pcmcia? function ? # Megahertz Ethernet 433 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 434 com* at mhzc? 435 sm* at mhzc? 436 437 #endif 438 439 #ifdef DRACO_CONFIGURATION 440 drsc0 at mainbus0 # DraCo scsi 441 scsibus* at drsc0 442 #endif 443 444 445 # each hard drive from low target to high 446 # will configure to the next available sd unit number 447 sd* at scsibus? target ? lun ? # scsi disks 448 st* at scsibus? target ? lun ? # scsi tapes 449 cd* at scsibus? target ? lun ? # scsi cds 450 ch* at scsibus? target ? lun ? # scsi autochangers 451 #ifndef INSTALL_CONFIGURATION 452 ss* at scsibus? target ? lun ? # scsi scanner 453 uk* at scsibus? target ? lun ? # scsi unknown 454 #endif 455 456 pseudo-device loop # loopback network interface 457 pseudo-device sl 1 # SLIP network interfaces 458 pseudo-device ppp 1 # PPP network interfaces 459 pseudo-device tun 1 # network tunnel line discipline 460 #pseudo-device gre 2 # generic L3 over IP tunnel 461 #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 462 pseudo-device bpfilter 16 # Berkeley packet filter 463 pseudo-device ipfilter # IP Filter package 464 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 465 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 466 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 467 pseudo-device vlan # IEEE 802.1q encapsulation 468 469 pseudo-device view 4 # views (needed for grfcc) 470 pseudo-device pty # pseudo-terminals 471 472 pseudo-device vnd 4 # vnode pseudo-disks 473 pseudo-device ccd 4 # concatenated disk devices 474 #pseudo-device raid 4 # RAIDframe disk driver 475 #options RAID_AUTOCONFIG # auto-configuration of RAID components 476 477 pseudo-device rnd # /dev/random and in-kernel generator 478 #options RND_COM # use "com" randomness as well (BROKEN) 479 480 config netbsd root on ? type ? 481
Indexes created Thu Oct 02 01:09:59 GMT 2025