GENERIC revision 1.162
1 # $NetBSD: GENERIC,v 1.162 2001/09/01 21:52:24 atatat Exp $ 2 3 # 4 #if 0 5 # GENERIC Amiga or DraCo 6 # 7 # This configuration file contains all possible options 8 # 9 # make AMIGA extracts the AMIGA configuration file. 10 # make DRACO extracts the DRACO configuration file. 11 # make INSTALL extracts the INSTALL configuration file. 12 # 13 # commit them, too. 14 #endif 15 # 16 17 include "arch/amiga/conf/std.amiga" 18 19 #ident "GENERIC-$Revision: 1.162 $" 20 21 #ifdef INSTALL_CONFIGURATION 22 makeoptions COPTS="-Os" 23 #endif 24 25 maxusers 8 26 options RTC_OFFSET=0 27 28 # 29 # mainboards to support (in addition to Amiga) 30 # 31 #ifdef DRACO_CONFIGURATION 32 options DRACO 33 34 #endif 35 #ifdef AMIGA_CONFIGURATION 36 options BB060STUPIDROM # You need this, if you have a non-DraCo 37 # MC68060 with an OS ROM up to (at least) 38 # V40 (OS3.1) and want to boot with the 39 # bootblock. 40 # You do not need this if you have a DraCo, 41 # have no 68060 or NEVER use the bootblock 42 options P5PPC68KBOARD # Phase5 PPC/68K board support 43 #endif 44 # 45 # processors this kernel should support 46 # 47 options M68060 # support for 060 48 options M060SP # MC68060 software support (Required for 060) 49 #ifdef AMIGA_CONFIGURATION 50 options M68040 # support for 040 51 options FPSP # MC68040 floating point support 52 options M68030 # support for 030 53 options M68020 # support for 020/851 54 options FPU_EMULATE # FPU emulation 55 #endif 56 57 # 58 # Networking options 59 # 60 options INET # IP networking support (Required) 61 options INET6 # IPV6 62 #options IPSEC # IP security 63 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 64 #options IPSEC_DEBUG # debug for IP security 65 #options GATEWAY # Packet forwarding 66 #options DIRECTED_BROADCAST # Broadcast across subnets 67 68 #ifndef INSTALL_CONFIGURATION 69 #options MROUTING # Multicast routing 70 options NS # XNS 71 #options NSIP # XNS tunneling over IP 72 options ISO,TPIP # OSI 73 #options EON # OSI tunneling over IP 74 options CCITT,LLC,HDLC # X.25 75 options NETATALK # AppleTalk networking protocols 76 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 #endif 78 79 options PPP_BSDCOMP # BSD-Compress compression support for PPP 80 options PPP_DEFLATE # Deflate compression support for PPP 81 options PPP_FILTER # Active filter support for PPP (requires bpf) 82 options PFIL_HOOKS # pfil(9) packet filter hooks 83 options IPFILTER_LOG # ipmon(8) log support 84 85 # Filesystems 86 file-system FFS # Berkeley fast file system 87 file-system EXT2FS # second extended file system (linux) 88 #file-system LFS # log-structured filesystem (experimental) 89 90 #ifndef INSTALL_CONFIGURATION 91 file-system MFS # Memory based filesystem 92 #endif 93 94 file-system NFS # Network File System client side code 95 file-system ADOSFS # AmigaDOS file system 96 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 97 file-system MSDOSFS # MS-DOS filesystem 98 99 file-system KERNFS # kernel data-structure filesystem 100 101 #ifndef INSTALL_CONFIGURATION 102 file-system FDESC # user file descriptor filesystem 103 file-system NULLFS # loopback filesystem 104 file-system OVERLAY # overlay filesystem 105 #file-system PORTAL # Portal filesystem 106 file-system PROCFS # /proc filesystem 107 file-system UMAPFS # NULLFS + uid and gid remapping 108 file-system UNION # union filesystem 109 #endif 110 111 # Filesystem options 112 113 #options FFS_EI # FFS Endian Independant support 114 115 #ifndef INSTALL_CONFIGURATION 116 options QUOTA # User and group quotas in FFS 117 options SOFTDEP # FFS soft updates support. 118 options NFSSERVER # Network File System server side code 119 #endif 120 121 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 122 # immutable) behave as system flags. 123 124 # 125 # Compatibility options for various existing systems 126 # 127 128 #ifndef INSTALL_CONFIGURATION 129 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 130 options COMPAT_43 # compatibility with 4.3BSD interfaces 131 options COMPAT_09 # compatibility with NetBSD 0.9 132 options COMPAT_10 # compatibility with NetBSD 1.0 133 options COMPAT_12 # compatibility with NetBSD 1.2 134 options COMPAT_13 # compatibility with NetBSD 1.3 135 options COMPAT_14 # compatibility with NetBSD 1.4 136 options COMPAT_SUNOS # Support to run Sun (m68k) executables 137 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 138 options COMPAT_NOMID # allow nonvalid machine id executables 139 #options COMPAT_LINUX # Support to run Linux/m68k executables 140 options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 141 #endif 142 143 #ifndef INSTALL_CONFIGURATION 144 # 145 # Support for System V IPC facilities. 146 # 147 options SYSVSHM # System V-like shared memory 148 options SYSVMSG # System V-like messages 149 options SYSVSEM # System V-like semaphores 150 #options SEMMNI=10 # number of semaphore identifiers 151 #options SEMMNS=60 # number of semaphores in system 152 #options SEMUME=10 # max number of undo entries per process 153 #options SEMMNU=30 # number of undo structures in system 154 #endif 155 156 # 157 # Support for various kernel options 158 # 159 160 #ifndef INSTALL_CONFIGURATION 161 options KTRACE # system call tracing support 162 options LKM # Loadable kernel modules 163 options UCONSOLE # anyone can redirect a virtual console 164 #endif 165 166 #options INSECURE # allow, among other insecure stuff, LKM 167 # loading in multi-user mode. 168 options SCSIVERBOSE # Verbose SCSI errors 169 170 #ifndef INSTALL_CONFIGURATION 171 options NTP # NTP phase/frequency locked loop 172 #endif 173 174 # 175 # Misc. debugging options 176 # 177 options DDB # Kernel debugger 178 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 179 options DIAGNOSTIC # Extra kernel sanity checks 180 #options DEBUG # Enable misc. kernel debugging code 181 #options SYSCALL_DEBUG # debug all syscalls. 182 #options SCSIDEBUG # Add SCSI debugging statements 183 #options PANICBUTTON # Forced crash via keypress (???) 184 185 # 186 # Amiga specific options 187 # 188 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 189 # first bank of RAM. (default: unlimited) 190 #options NKPTADD=4 # set this for 4 additional KPT pages 191 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 192 # per 16 MB (1<<24 bytes) of RAM 193 # define and decrease this, or define and 194 # increase NKPTADD if you get "out of PT pages" 195 # panics. 196 197 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 198 # before the 10 secondinterval ends, or that KBDRESET does work at all. 199 #options KBDRESET # sync on Ctrl-Amiga-Amiga 200 201 # These options improve performance with the built-in serial port 202 # on slower Amigas. Try the larger buffers first then lev6_defer. 203 #options SERIBUF_SIZE=4096 204 #options SEROBUF_SIZE=32 205 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 206 207 options RETINACONSOLE # enable code to allow retina to be console 208 #ifdef AMIGA_CONFIGURATION 209 options ULOWELLCONSOLE # enable code to allow a2410 to be console 210 options CL5426CONSOLE # Cirrus console 211 options CV64CONSOLE # CyberVision console 212 options TSENGCONSOLE # Tseng console 213 options CV3DCONSOLE # CyberVision 64/3D console 214 #endif 215 216 #ifdef AMIGA_CONFIGURATION 217 options GRF_ECS # Enhanced Chip Set 218 options GRF_NTSC # NTSC 219 options GRF_PAL # PAL 220 options GRF_A2024 # Support for the A2024 221 options GRF_AGA # AGA Chip Set 222 options GRF_AGA_VGA # AGA VGAONLY timing 223 options GRF_SUPER72 # AGA Super-72 224 #endif 225 #options KFONT_8X11 # 8x11 font 226 227 # This is how you would tell the kernel the A2410 oscillator frequencies: 228 # The used frequencies are the defaults, and do not need option setting 229 #options ULOWELL_OSC1=36000000 230 #options ULOWELL_OSC2=66667000 231 232 # This is how you specify the blitting speed, higher values may speed up blits 233 # a littel bit. If you raise this value too much some trash may appear. 234 # the commented version is the default. 235 #options RH_MEMCLK=61000000 236 # this option enables the 64 bit sprite which does not work 237 # for quite a few people. E.g. The cursor sprite will turn to a block 238 # when moved to the top of the screen in X. 239 #options RH_64BIT_SPRITE 240 # enables fast scroll code appears to now work on 040 systems. 241 #options RETINA_SPEED_HACK 242 # enables the Hardwarecursor which does not work on some systems. 243 #options RH_HARDWARECURSOR 244 245 #ifdef AMIGA_CONFIGURATION 246 # wscons aware interface to amiga custom chips. Text-only console. 247 # If you enable it enable also wskbd. 248 # 249 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 250 #wsdisplay0 at amidisplaycc0 console ? 251 #options WSEMUL_VT100 252 #endif 253 254 #ifdef AMIGA_CONFIGURATION 255 grfcc0 at mainbus0 # custom chips 256 grfrt0 at zbus0 # retina II 257 #endif 258 grfrh0 at zbus0 # retina III 259 #ifdef AMIGA_CONFIGURATION 260 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 261 grful0 at zbus0 # A2410 262 grfcv0 at zbus0 # CyberVision 64 263 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 264 grfcv3d0 at zbus0 # CyberVision 64/3D 265 #endif 266 267 #ifdef AMIGA_CONFIGURATION 268 grf0 at grfcc0 269 grf1 at grfrt0 270 #endif 271 grf2 at grfrh0 272 #ifdef AMIGA_CONFIGURATION 273 grf3 at grfcl? 274 grf4 at grful0 275 grf5 at grfcv0 276 grf6 at grfet? 277 grf7 at grfcv3d0 278 #endif 279 #ifdef AMIGA_CONFIGURATION 280 ite0 at grf0 # terminal emulators for grfs 281 ite1 at grf1 # terminal emulators for grfs 282 #endif 283 ite2 at grf2 # terminal emulators for grfs 284 #ifdef AMIGA_CONFIGURATION 285 ite3 at grf3 # terminal emulators for grfs 286 ite4 at grf4 # terminal emulators for grfs 287 ite5 at grf5 # terminal emulators for grfs 288 ite6 at grf6 # terminal emulators for grfs 289 ite7 at grf7 # terminal emulators for grfs 290 #endif 291 292 msc0 at zbus0 # A2232 MSC multiport serial. 293 mfc0 at zbus0 # MultiFaceCard I/O board 294 mfcs0 at mfc0 unit 0 # MFC serial 295 mfcs1 at mfc0 unit 1 # MFC serial 296 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 297 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 298 #mfcs2 at mfc1 unit 0 299 #mfcs3 at mfc1 unit 1 300 #mfcp1 at mfc1 unit 0 301 302 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 303 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 304 com* at hyper? port ? # Hypercom3/4 serial ports 305 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 306 307 #options IOBZCLOCK=22118400 # default, uncomment the next line 308 #options IOBZCLOCK=24000000 # if needed. 309 310 iobl* at zbus? # zbus IOBlix 311 com* at iobl? port ? # IOBlix serial ports 312 lpt* at iobl? port ? # IOBlix parallel ports 313 314 315 # 316 # Keyboard device. Optionally can attach a wskbd. 317 # wskbd works together with a wsdisplay so enable them both if you will. 318 # Don't enable wskbd if you use ite. 319 # 320 # XXX in std.amiga: kbd0 at mainbus0 321 #wskbd0 at kbd0 console ? 322 323 324 #ifdef AMIGA_CONFIGURATION 325 # 326 # Amiga Mainboard devices (sans graphics and keyboard) 327 # 328 329 ser0 at mainbus0 # Amiga onboard serial 330 par0 at mainbus0 # Amiga onboard parallel 331 ms* at mainbus0 # Amiga mice 332 fdc0 at mainbus0 # Amiga FDC 333 fd* at fdc0 unit ? # floppy disks on the later 334 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 335 a2kbbc0 at mainbus0 # A2000 battery backed clock 336 aucc* at mainbus0 # Amiga CC audio 337 audio* at aucc? 338 #endif 339 340 #ifdef DRACO_CONFIGURATION 341 # 342 # DraCo Mainboard devices (sans keyboard) 343 # 344 345 drbbc0 at mainbus0 # DraCo battery backed clock 346 drsupio0 at mainbus0 # DraCo superio chip 347 com* at drsupio? port ? # DraCo serial 348 lpt0 at drsupio? port ? # DraCo parallel 349 #endif 350 351 # 352 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 353 # 354 355 #ifndef DRACO_CONFIGURATION 356 # Alas, Melody-Z2 dont configure in the DraCo bus. 357 melody* at zbus0 # Melody MPEG audio decoder 358 audio* at melody? 359 #endif 360 361 repulse* at zbus0 # ALiENDESiGN Repulse 362 audio* at repulse? 363 364 # Ethernet cards: 365 le* at zbus0 # A2065, Ameristar, Ariadne 366 ne* at zbus0 # AriadneII, X-surf 367 ed* at zbus0 # Hydra, ASDG LanRover 368 es* at zbus0 # CEI A4066 EthernetPLUS 369 qn* at zbus0 # Quicknet 370 371 # Arcnet 372 bah* at zbus0 # C=/Ameristar A2060 / 560 373 374 #ifdef AMIGA_CONFIGURATION 375 # Greater Valley Product Bus 376 gvpbus* at zbus0 377 378 # scsi stuff, all possible 379 gtsc0 at gvpbus? # GVP series II scsi 380 scsibus* at gtsc0 381 ahsc0 at mainbus0 # A3000 scsi 382 scsibus* at ahsc0 383 atzsc0 at zbus0 # A2091 scsi 384 scsibus* at atzsc0 385 wstsc0 at zbus0 # Wordsync II scsi 386 scsibus* at wstsc0 387 ivsc0 at zbus0 # IVS scsi 388 scsibus* at ivsc0 389 mlhsc0 at zbus0 # Hacker scsi 390 scsibus* at mlhsc0 391 otgsc0 at zbus0 # 12 gauge scsi 392 scsibus* at otgsc0 393 zssc0 at zbus0 # Zeus scsi 394 scsibus* at zssc0 395 mgnsc0 at zbus0 # Magnum scsi 396 scsibus* at mgnsc0 397 wesc0 at zbus0 # Warp Engine scsi 398 scsibus* at wesc0 399 afsc0 at zbus0 # A4091 scsi 400 scsibus* at afsc0 401 aftsc0 at mainbus0 # A4000T scsi 402 scsibus* at aftsc0 403 flsc0 at zbus0 # FastlaneZ3 scsi 404 scsibus* at flsc0 405 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 406 scsibus* at bzsc0 407 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 408 scsibus* at bzivsc0 409 bztzsc0 at zbus0 # Blizzard 2060 scsi 410 scsibus* at bztzsc0 411 cbsc0 at zbus0 # CyberSCSI I 412 scsibus* at cbsc0 413 cbiisc0 at zbus0 # CyberSCSI II 414 scsibus* at cbiisc0 415 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 416 scsibus* at cbiiisc0 417 empsc0 at zbus0 # Emplant scsi 418 scsibus* at empsc0 419 #idesc0 at mainbus0 # A4000 & A1200 IDE 420 #scsibus* at idesc0 421 422 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 423 # <<< are uncommented >>> 424 wdc0 at mainbus0 # A4000 & A1200 IDE bus 425 wd* at wdc? drive ? # + drives 426 atapibus* at wdc? channel ? # ATAPI bus 427 cd* at atapibus? drive ? # ATAPI CD-ROM drives 428 sd* at atapibus? drive ? # ATAPI disk drives 429 430 pccard0 at mainbus0 431 pcmcia* at pccard0 432 com* at pcmcia? function ? # Modems and serial cards 433 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 434 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 435 wdc* at pcmcia? function ? 436 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 437 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 438 mbe* at pcmcia? function ? # MB8696x based Ethernet 439 ne* at pcmcia? function ? # NE2000-compatible Ethernet 440 sm* at pcmcia? function ? # Megahertz Ethernet 441 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 442 com* at mhzc? 443 sm* at mhzc? 444 445 #endif 446 447 #ifdef DRACO_CONFIGURATION 448 drsc0 at mainbus0 # DraCo scsi 449 scsibus* at drsc0 450 #endif 451 452 453 # each hard drive from low target to high 454 # will configure to the next available sd unit number 455 sd* at scsibus? target ? lun ? # scsi disks 456 st* at scsibus? target ? lun ? # scsi tapes 457 cd* at scsibus? target ? lun ? # scsi cds 458 ch* at scsibus? target ? lun ? # scsi autochangers 459 #ifndef INSTALL_CONFIGURATION 460 ss* at scsibus? target ? lun ? # scsi scanner 461 uk* at scsibus? target ? lun ? # scsi unknown 462 #endif 463 464 pseudo-device loop # loopback network interface 465 pseudo-device sl 1 # SLIP network interfaces 466 pseudo-device ppp 1 # PPP network interfaces 467 pseudo-device tun 1 # network tunnel line discipline 468 #pseudo-device gre 2 # generic L3 over IP tunnel 469 #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 470 pseudo-device bpfilter 16 # Berkeley packet filter 471 pseudo-device ipfilter # IP Filter package 472 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 473 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 474 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 475 pseudo-device vlan # IEEE 802.1q encapsulation 476 pseudo-device bridge # simple inter-network bridging 477 478 pseudo-device view 4 # views (needed for grfcc) 479 pseudo-device pty # pseudo-terminals 480 481 pseudo-device vnd 4 # vnode pseudo-disks 482 pseudo-device ccd 4 # concatenated disk devices 483 #pseudo-device raid 4 # RAIDframe disk driver 484 #options RAID_AUTOCONFIG # auto-configuration of RAID components 485 486 pseudo-device rnd # /dev/random and in-kernel generator 487 #options RND_COM # use "com" randomness as well (BROKEN) 488 489 config netbsd root on ? type ? 490
Indexes created Fri Oct 03 02:09:57 GMT 2025