GENERIC revision 1.163
1# $NetBSD: GENERIC,v 1.163 2001/11/20 12:56:20 lukem Exp $ 2 3# 4#if 0 5# GENERIC Amiga or DraCo 6# 7# This configuration file contains all possible options 8# 9# make AMIGA extracts the AMIGA configuration file. 10# make DRACO extracts the DRACO configuration file. 11# make INSTALL extracts the INSTALL configuration file. 12# 13# commit them, too. 14#endif 15# 16 17include "arch/amiga/conf/std.amiga" 18 19#ident "GENERIC-$Revision: 1.163 $" 20 21#ifdef INSTALL_CONFIGURATION 22makeoptions COPTS="-Os" 23#endif 24 25maxusers 8 26options RTC_OFFSET=0 27 28# 29# mainboards to support (in addition to Amiga) 30# 31#ifdef DRACO_CONFIGURATION 32options DRACO 33 34#endif 35#ifdef AMIGA_CONFIGURATION 36options BB060STUPIDROM # You need this, if you have a non-DraCo 37 # MC68060 with an OS ROM up to (at least) 38 # V40 (OS3.1) and want to boot with the 39 # bootblock. 40 # You do not need this if you have a DraCo, 41 # have no 68060 or NEVER use the bootblock 42options P5PPC68KBOARD # Phase5 PPC/68K board support 43#endif 44# 45# processors this kernel should support 46# 47options M68060 # support for 060 48options M060SP # MC68060 software support (Required for 060) 49#ifdef AMIGA_CONFIGURATION 50options M68040 # support for 040 51options FPSP # MC68040 floating point support 52options M68030 # support for 030 53options M68020 # support for 020/851 54options FPU_EMULATE # FPU emulation 55#endif 56 57# 58# Networking options 59# 60options INET # IP networking support (Required) 61options INET6 # IPV6 62#options IPSEC # IP security 63#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 64#options IPSEC_DEBUG # debug for IP security 65#options GATEWAY # Packet forwarding 66#options DIRECTED_BROADCAST # Broadcast across subnets 67 68#ifndef INSTALL_CONFIGURATION 69#options MROUTING # Multicast routing 70options NS # XNS 71#options NSIP # XNS tunneling over IP 72options ISO,TPIP # OSI 73#options EON # OSI tunneling over IP 74options CCITT,LLC,HDLC # X.25 75options NETATALK # AppleTalk networking protocols 76#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77#endif 78 79options PPP_BSDCOMP # BSD-Compress compression support for PPP 80options PPP_DEFLATE # Deflate compression support for PPP 81options PPP_FILTER # Active filter support for PPP (requires bpf) 82options PFIL_HOOKS # pfil(9) packet filter hooks 83options IPFILTER_LOG # ipmon(8) log support 84 85# Filesystems 86file-system FFS # Berkeley fast file system 87file-system EXT2FS # second extended file system (linux) 88#file-system LFS # log-structured filesystem (experimental) 89 90#ifndef INSTALL_CONFIGURATION 91file-system MFS # Memory based filesystem 92#endif 93 94file-system NFS # Network File System client side code 95file-system ADOSFS # AmigaDOS file system 96file-system CD9660 # ISO 9660 + Rock Ridge filesystem 97file-system MSDOSFS # MS-DOS filesystem 98 99file-system KERNFS # kernel data-structure filesystem 100 101#ifndef INSTALL_CONFIGURATION 102file-system FDESC # user file descriptor filesystem 103file-system NULLFS # loopback filesystem 104file-system OVERLAY # overlay filesystem 105#file-system PORTAL # Portal filesystem 106file-system PROCFS # /proc filesystem 107file-system UMAPFS # NULLFS + uid and gid remapping 108file-system UNION # union filesystem 109#endif 110 111# Filesystem options 112 113#options FFS_EI # FFS Endian Independant support 114 115#ifndef INSTALL_CONFIGURATION 116options QUOTA # User and group quotas in FFS 117options SOFTDEP # FFS soft updates support. 118options NFSSERVER # Network File System server side code 119#endif 120 121#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 122 # immutable) behave as system flags. 123 124# 125# Compatibility options for various existing systems 126# 127 128#ifndef INSTALL_CONFIGURATION 129#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 130options COMPAT_43 # compatibility with 4.3BSD interfaces 131options COMPAT_09 # compatibility with NetBSD 0.9 132options COMPAT_10 # compatibility with NetBSD 1.0 133options COMPAT_12 # compatibility with NetBSD 1.2 134options COMPAT_13 # compatibility with NetBSD 1.3 135options COMPAT_14 # compatibility with NetBSD 1.4 136options COMPAT_SUNOS # Support to run Sun (m68k) executables 137options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 138options COMPAT_NOMID # allow nonvalid machine id executables 139#options COMPAT_LINUX # Support to run Linux/m68k executables 140options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 141#endif 142 143#ifndef INSTALL_CONFIGURATION 144# 145# Support for System V IPC facilities. 146# 147options SYSVSHM # System V-like shared memory 148options SYSVMSG # System V-like messages 149options SYSVSEM # System V-like semaphores 150#options SEMMNI=10 # number of semaphore identifiers 151#options SEMMNS=60 # number of semaphores in system 152#options SEMUME=10 # max number of undo entries per process 153#options SEMMNU=30 # number of undo structures in system 154#endif 155 156# 157# Support for various kernel options 158# 159 160#ifndef INSTALL_CONFIGURATION 161options KTRACE # system call tracing support 162options LKM # Loadable kernel modules 163options UCONSOLE # anyone can redirect a virtual console 164#endif 165 166#options INSECURE # allow, among other insecure stuff, LKM 167 # loading in multi-user mode. 168options SCSIVERBOSE # Verbose SCSI errors 169 170#ifndef INSTALL_CONFIGURATION 171options NTP # NTP phase/frequency locked loop 172#endif 173 174# 175# Misc. debugging options 176# 177options DDB # Kernel debugger 178#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 179options DIAGNOSTIC # Extra kernel sanity checks 180#options DEBUG # Enable misc. kernel debugging code 181#options SYSCALL_DEBUG # debug all syscalls. 182#options SCSIDEBUG # Add SCSI debugging statements 183#options PANICBUTTON # Forced crash via keypress (???) 184 185# 186# Amiga specific options 187# 188#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 189 # first bank of RAM. (default: unlimited) 190#options NKPTADD=4 # set this for 4 additional KPT pages 191#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 192 # per 16 MB (1<<24 bytes) of RAM 193 # define and decrease this, or define and 194 # increase NKPTADD if you get "out of PT pages" 195 # panics. 196 197# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 198# before the 10 secondinterval ends, or that KBDRESET does work at all. 199#options KBDRESET # sync on Ctrl-Amiga-Amiga 200 201# These options improve performance with the built-in serial port 202# on slower Amigas. Try the larger buffers first then lev6_defer. 203#options SERIBUF_SIZE=4096 204#options SEROBUF_SIZE=32 205#options LEV6_DEFER # defers l6 to l4 (below serial l5) 206 207options RETINACONSOLE # enable code to allow retina to be console 208#ifdef AMIGA_CONFIGURATION 209options ULOWELLCONSOLE # enable code to allow a2410 to be console 210options CL5426CONSOLE # Cirrus console 211options CV64CONSOLE # CyberVision console 212options TSENGCONSOLE # Tseng console 213options CV3DCONSOLE # CyberVision 64/3D console 214#endif 215 216#ifdef AMIGA_CONFIGURATION 217options GRF_ECS # Enhanced Chip Set 218options GRF_NTSC # NTSC 219options GRF_PAL # PAL 220options GRF_A2024 # Support for the A2024 221options GRF_AGA # AGA Chip Set 222options GRF_AGA_VGA # AGA VGAONLY timing 223options GRF_SUPER72 # AGA Super-72 224#endif 225#options KFONT_8X11 # 8x11 font 226 227# This is how you would tell the kernel the A2410 oscillator frequencies: 228# The used frequencies are the defaults, and do not need option setting 229#options ULOWELL_OSC1=36000000 230#options ULOWELL_OSC2=66667000 231 232# This is how you specify the blitting speed, higher values may speed up blits 233# a littel bit. If you raise this value too much some trash may appear. 234# the commented version is the default. 235#options RH_MEMCLK=61000000 236# this option enables the 64 bit sprite which does not work 237# for quite a few people. E.g. The cursor sprite will turn to a block 238# when moved to the top of the screen in X. 239#options RH_64BIT_SPRITE 240# enables fast scroll code appears to now work on 040 systems. 241#options RETINA_SPEED_HACK 242# enables the Hardwarecursor which does not work on some systems. 243#options RH_HARDWARECURSOR 244 245#ifdef AMIGA_CONFIGURATION 246# wscons aware interface to amiga custom chips. Text-only console. 247# If you enable it enable also wskbd. 248# 249#amidisplaycc0 at mainbus0 # wscons interface to custom chips 250#wsdisplay0 at amidisplaycc0 console ? 251#options WSEMUL_VT100 252#endif 253 254#ifdef AMIGA_CONFIGURATION 255grfcc0 at mainbus0 # custom chips 256grfrt0 at zbus0 # retina II 257#endif 258grfrh0 at zbus0 # retina III 259#ifdef AMIGA_CONFIGURATION 260grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 261grful0 at zbus0 # A2410 262grfcv0 at zbus0 # CyberVision 64 263grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 264grfcv3d0 at zbus0 # CyberVision 64/3D 265#endif 266 267#ifdef AMIGA_CONFIGURATION 268grf0 at grfcc0 269grf1 at grfrt0 270#endif 271grf2 at grfrh0 272#ifdef AMIGA_CONFIGURATION 273grf3 at grfcl? 274grf4 at grful0 275grf5 at grfcv0 276grf6 at grfet? 277grf7 at grfcv3d0 278#endif 279#ifdef AMIGA_CONFIGURATION 280ite0 at grf0 # terminal emulators for grfs 281ite1 at grf1 # terminal emulators for grfs 282#endif 283ite2 at grf2 # terminal emulators for grfs 284#ifdef AMIGA_CONFIGURATION 285ite3 at grf3 # terminal emulators for grfs 286ite4 at grf4 # terminal emulators for grfs 287ite5 at grf5 # terminal emulators for grfs 288ite6 at grf6 # terminal emulators for grfs 289ite7 at grf7 # terminal emulators for grfs 290#endif 291 292msc0 at zbus0 # A2232 MSC multiport serial. 293mfc0 at zbus0 # MultiFaceCard I/O board 294mfcs0 at mfc0 unit 0 # MFC serial 295mfcs1 at mfc0 unit 1 # MFC serial 296#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 297#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 298#mfcs2 at mfc1 unit 0 299#mfcs3 at mfc1 unit 1 300#mfcp1 at mfc1 unit 0 301 302hyper* at zbus? # zbus HyperCom3/3+/4/4+ 303#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 304com* at hyper? port ? # Hypercom3/4 serial ports 305lpt* at hyper? port ? # Hypercom3+/4+ parallel port 306 307#options IOBZCLOCK=22118400 # default, uncomment the next line 308#options IOBZCLOCK=24000000 # if needed. 309 310iobl* at zbus? # zbus IOBlix 311com* at iobl? port ? # IOBlix serial ports 312lpt* at iobl? port ? # IOBlix parallel ports 313 314 315# 316# Keyboard device. Optionally can attach a wskbd. 317# wskbd works together with a wsdisplay so enable them both if you will. 318# Don't enable wskbd if you use ite. 319# 320# XXX in std.amiga: kbd0 at mainbus0 321#wskbd0 at kbd0 console ? 322 323 324#ifdef AMIGA_CONFIGURATION 325# 326# Amiga Mainboard devices (sans graphics and keyboard) 327# 328 329ser0 at mainbus0 # Amiga onboard serial 330par0 at mainbus0 # Amiga onboard parallel 331ms* at mainbus0 # Amiga mice 332fdc0 at mainbus0 # Amiga FDC 333fd* at fdc0 unit ? # floppy disks on the later 334a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 335a2kbbc0 at mainbus0 # A2000 battery backed clock 336aucc* at mainbus0 # Amiga CC audio 337audio* at aucc? 338#endif 339 340#ifdef DRACO_CONFIGURATION 341# 342# DraCo Mainboard devices (sans keyboard) 343# 344 345drbbc0 at mainbus0 # DraCo battery backed clock 346drsupio0 at mainbus0 # DraCo superio chip 347com* at drsupio? port ? # DraCo serial 348lpt0 at drsupio? port ? # DraCo parallel 349#endif 350 351# 352# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 353# 354 355#ifndef DRACO_CONFIGURATION 356# Alas, Melody-Z2 dont configure in the DraCo bus. 357melody* at zbus0 # Melody MPEG audio decoder 358audio* at melody? 359#endif 360 361repulse* at zbus0 # ALiENDESiGN Repulse 362audio* at repulse? 363 364# Ethernet cards: 365le* at zbus0 # A2065, Ameristar, Ariadne 366ne* at zbus0 # AriadneII, X-surf 367ed* at zbus0 # Hydra, ASDG LanRover 368es* at zbus0 # CEI A4066 EthernetPLUS 369qn* at zbus0 # Quicknet 370 371# Arcnet 372bah* at zbus0 # C=/Ameristar A2060 / 560 373 374#ifdef AMIGA_CONFIGURATION 375# Greater Valley Product Bus 376gvpbus* at zbus0 377 378# scsi stuff, all possible 379gtsc0 at gvpbus? # GVP series II scsi 380scsibus* at gtsc0 381ahsc0 at mainbus0 # A3000 scsi 382scsibus* at ahsc0 383atzsc0 at zbus0 # A2091 scsi 384scsibus* at atzsc0 385wstsc0 at zbus0 # Wordsync II scsi 386scsibus* at wstsc0 387ivsc0 at zbus0 # IVS scsi 388scsibus* at ivsc0 389mlhsc0 at zbus0 # Hacker scsi 390scsibus* at mlhsc0 391otgsc0 at zbus0 # 12 gauge scsi 392scsibus* at otgsc0 393zssc0 at zbus0 # Zeus scsi 394scsibus* at zssc0 395mgnsc0 at zbus0 # Magnum scsi 396scsibus* at mgnsc0 397wesc0 at zbus0 # Warp Engine scsi 398scsibus* at wesc0 399afsc0 at zbus0 # A4091 scsi 400scsibus* at afsc0 401aftsc0 at mainbus0 # A4000T scsi 402scsibus* at aftsc0 403flsc0 at zbus0 # FastlaneZ3 scsi 404scsibus* at flsc0 405bzsc0 at zbus0 # Blizzard 1230 I,II scsi 406scsibus* at bzsc0 407bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 408scsibus* at bzivsc0 409bztzsc0 at zbus0 # Blizzard 2060 scsi 410scsibus* at bztzsc0 411cbsc0 at zbus0 # CyberSCSI I 412scsibus* at cbsc0 413cbiisc0 at zbus0 # CyberSCSI II 414scsibus* at cbiisc0 415cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 416scsibus* at cbiiisc0 417empsc0 at zbus0 # Emplant scsi 418scsibus* at empsc0 419#idesc0 at mainbus0 # A4000 & A1200 IDE 420#scsibus* at idesc0 421 422# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 423# <<< are uncommented >>> 424wdc0 at mainbus0 # A4000 & A1200 IDE bus 425wd* at wdc? drive ? # + drives 426atapibus* at wdc? channel ? # ATAPI bus 427cd* at atapibus? drive ? # ATAPI CD-ROM drives 428sd* at atapibus? drive ? # ATAPI disk drives 429 430pccard0 at mainbus0 431pcmcia* at pccard0 432com* at pcmcia? function ? # Modems and serial cards 433pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 434aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 435wdc* at pcmcia? function ? 436awi* at pcmcia? function ? # BayStack 650 (802.11FH) 437ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 438mbe* at pcmcia? function ? # MB8696x based Ethernet 439ne* at pcmcia? function ? # NE2000-compatible Ethernet 440sm* at pcmcia? function ? # Megahertz Ethernet 441mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 442com* at mhzc? 443sm* at mhzc? 444 445#endif 446 447#ifdef DRACO_CONFIGURATION 448drsc0 at mainbus0 # DraCo scsi 449scsibus* at drsc0 450#endif 451 452 453# each hard drive from low target to high 454# will configure to the next available sd unit number 455sd* at scsibus? target ? lun ? # scsi disks 456st* at scsibus? target ? lun ? # scsi tapes 457cd* at scsibus? target ? lun ? # scsi cds 458ch* at scsibus? target ? lun ? # scsi autochangers 459#ifndef INSTALL_CONFIGURATION 460ss* at scsibus? target ? lun ? # scsi scanner 461uk* at scsibus? target ? lun ? # scsi unknown 462#endif 463 464pseudo-device loop # loopback network interface 465pseudo-device sl 1 # SLIP network interfaces 466pseudo-device ppp 1 # PPP network interfaces 467pseudo-device tun 1 # network tunnel line discipline 468#pseudo-device gre 2 # generic L3 over IP tunnel 469#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 470pseudo-device bpfilter 16 # Berkeley packet filter 471pseudo-device ipfilter # IP Filter package 472pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 473#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 474#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 475pseudo-device vlan # IEEE 802.1q encapsulation 476pseudo-device bridge # simple inter-network bridging 477 478pseudo-device view 4 # views (needed for grfcc) 479pseudo-device pty # pseudo-terminals 480 481pseudo-device vnd 4 # vnode pseudo-disks 482pseudo-device ccd 4 # concatenated disk devices 483#pseudo-device raid 4 # RAIDframe disk driver 484#options RAID_AUTOCONFIG # auto-configuration of RAID components 485 486pseudo-device rnd # /dev/random and in-kernel generator 487#options RND_COM # use "com" randomness as well (BROKEN) 488 489config netbsd root on ? type ? 490