GENERIC revision 1.164
1# $NetBSD: GENERIC,v 1.164 2001/12/14 05:34:45 gmcgarry Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# 22#if 0 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make INSTALL extracts the INSTALL configuration file. 30# 31# commit them, too. 32#endif 33# 34 35include "arch/amiga/conf/std.amiga" 36 37#ident "GENERIC-$Revision: 1.164 $" 38 39#ifdef INSTALL_CONFIGURATION 40makeoptions COPTS="-Os" 41#endif 42 43maxusers 8 44options RTC_OFFSET=0 45 46# 47# mainboards to support (in addition to Amiga) 48# 49#ifdef DRACO_CONFIGURATION 50options DRACO 51 52#endif 53#ifdef AMIGA_CONFIGURATION 54options BB060STUPIDROM # You need this, if you have a non-DraCo 55 # MC68060 with an OS ROM up to (at least) 56 # V40 (OS3.1) and want to boot with the 57 # bootblock. 58 # You do not need this if you have a DraCo, 59 # have no 68060 or NEVER use the bootblock 60options P5PPC68KBOARD # Phase5 PPC/68K board support 61#endif 62# 63# processors this kernel should support 64# 65options M68060 # support for 060 66options M060SP # MC68060 software support (Required for 060) 67#ifdef AMIGA_CONFIGURATION 68options M68040 # support for 040 69options FPSP # MC68040 floating point support 70options M68030 # support for 030 71options M68020 # support for 020/851 72options FPU_EMULATE # FPU emulation 73#endif 74 75# 76# Networking options 77# 78options INET # IP networking support (Required) 79options INET6 # IPV6 80#options IPSEC # IP security 81#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 82#options IPSEC_DEBUG # debug for IP security 83#options GATEWAY # Packet forwarding 84#options DIRECTED_BROADCAST # Broadcast across subnets 85 86#ifndef INSTALL_CONFIGURATION 87#options MROUTING # Multicast routing 88options NS # XNS 89#options NSIP # XNS tunneling over IP 90options ISO,TPIP # OSI 91#options EON # OSI tunneling over IP 92options CCITT,LLC,HDLC # X.25 93options NETATALK # AppleTalk networking protocols 94#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 95#endif 96 97options PPP_BSDCOMP # BSD-Compress compression support for PPP 98options PPP_DEFLATE # Deflate compression support for PPP 99options PPP_FILTER # Active filter support for PPP (requires bpf) 100options PFIL_HOOKS # pfil(9) packet filter hooks 101options IPFILTER_LOG # ipmon(8) log support 102 103# Filesystems 104file-system FFS # Berkeley fast file system 105file-system EXT2FS # second extended file system (linux) 106#file-system LFS # log-structured filesystem (experimental) 107 108#ifndef INSTALL_CONFIGURATION 109file-system MFS # Memory based filesystem 110#endif 111 112file-system NFS # Network File System client side code 113file-system ADOSFS # AmigaDOS file system 114file-system CD9660 # ISO 9660 + Rock Ridge filesystem 115file-system MSDOSFS # MS-DOS filesystem 116 117file-system KERNFS # kernel data-structure filesystem 118 119#ifndef INSTALL_CONFIGURATION 120file-system FDESC # user file descriptor filesystem 121file-system NULLFS # loopback filesystem 122file-system OVERLAY # overlay filesystem 123#file-system PORTAL # Portal filesystem 124file-system PROCFS # /proc filesystem 125file-system UMAPFS # NULLFS + uid and gid remapping 126file-system UNION # union filesystem 127#endif 128 129# Filesystem options 130 131#options FFS_EI # FFS Endian Independant support 132 133#ifndef INSTALL_CONFIGURATION 134options QUOTA # User and group quotas in FFS 135options SOFTDEP # FFS soft updates support. 136options NFSSERVER # Network File System server side code 137#endif 138 139#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 140 # immutable) behave as system flags. 141 142# 143# Compatibility options for various existing systems 144# 145 146#ifndef INSTALL_CONFIGURATION 147#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 148options COMPAT_43 # compatibility with 4.3BSD interfaces 149options COMPAT_09 # compatibility with NetBSD 0.9 150options COMPAT_10 # compatibility with NetBSD 1.0 151options COMPAT_12 # compatibility with NetBSD 1.2 152options COMPAT_13 # compatibility with NetBSD 1.3 153options COMPAT_14 # compatibility with NetBSD 1.4 154options COMPAT_SUNOS # Support to run Sun (m68k) executables 155options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 156options COMPAT_NOMID # allow nonvalid machine id executables 157#options COMPAT_LINUX # Support to run Linux/m68k executables 158options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 159#endif 160 161#ifndef INSTALL_CONFIGURATION 162# 163# Support for System V IPC facilities. 164# 165options SYSVSHM # System V-like shared memory 166options SYSVMSG # System V-like messages 167options SYSVSEM # System V-like semaphores 168#options SEMMNI=10 # number of semaphore identifiers 169#options SEMMNS=60 # number of semaphores in system 170#options SEMUME=10 # max number of undo entries per process 171#options SEMMNU=30 # number of undo structures in system 172#endif 173 174# 175# Support for various kernel options 176# 177 178#ifndef INSTALL_CONFIGURATION 179options KTRACE # system call tracing support 180options LKM # Loadable kernel modules 181options UCONSOLE # anyone can redirect a virtual console 182#endif 183 184#options INSECURE # allow, among other insecure stuff, LKM 185 # loading in multi-user mode. 186options SCSIVERBOSE # Verbose SCSI errors 187 188#ifndef INSTALL_CONFIGURATION 189options NTP # NTP phase/frequency locked loop 190#endif 191 192# 193# Misc. debugging options 194# 195options DDB # Kernel debugger 196#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 197options DIAGNOSTIC # Extra kernel sanity checks 198#options DEBUG # Enable misc. kernel debugging code 199#options SYSCALL_DEBUG # debug all syscalls. 200#options SCSIDEBUG # Add SCSI debugging statements 201#options PANICBUTTON # Forced crash via keypress (???) 202 203# 204# Amiga specific options 205# 206#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 207 # first bank of RAM. (default: unlimited) 208#options NKPTADD=4 # set this for 4 additional KPT pages 209#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 210 # per 16 MB (1<<24 bytes) of RAM 211 # define and decrease this, or define and 212 # increase NKPTADD if you get "out of PT pages" 213 # panics. 214 215# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 216# before the 10 secondinterval ends, or that KBDRESET does work at all. 217#options KBDRESET # sync on Ctrl-Amiga-Amiga 218 219# These options improve performance with the built-in serial port 220# on slower Amigas. Try the larger buffers first then lev6_defer. 221#options SERIBUF_SIZE=4096 222#options SEROBUF_SIZE=32 223#options LEV6_DEFER # defers l6 to l4 (below serial l5) 224 225options RETINACONSOLE # enable code to allow retina to be console 226#ifdef AMIGA_CONFIGURATION 227options ULOWELLCONSOLE # enable code to allow a2410 to be console 228options CL5426CONSOLE # Cirrus console 229options CV64CONSOLE # CyberVision console 230options TSENGCONSOLE # Tseng console 231options CV3DCONSOLE # CyberVision 64/3D console 232#endif 233 234#ifdef AMIGA_CONFIGURATION 235options GRF_ECS # Enhanced Chip Set 236options GRF_NTSC # NTSC 237options GRF_PAL # PAL 238options GRF_A2024 # Support for the A2024 239options GRF_AGA # AGA Chip Set 240options GRF_AGA_VGA # AGA VGAONLY timing 241options GRF_SUPER72 # AGA Super-72 242#endif 243#options KFONT_8X11 # 8x11 font 244 245# This is how you would tell the kernel the A2410 oscillator frequencies: 246# The used frequencies are the defaults, and do not need option setting 247#options ULOWELL_OSC1=36000000 248#options ULOWELL_OSC2=66667000 249 250# This is how you specify the blitting speed, higher values may speed up blits 251# a littel bit. If you raise this value too much some trash may appear. 252# the commented version is the default. 253#options RH_MEMCLK=61000000 254# this option enables the 64 bit sprite which does not work 255# for quite a few people. E.g. The cursor sprite will turn to a block 256# when moved to the top of the screen in X. 257#options RH_64BIT_SPRITE 258# enables fast scroll code appears to now work on 040 systems. 259#options RETINA_SPEED_HACK 260# enables the Hardwarecursor which does not work on some systems. 261#options RH_HARDWARECURSOR 262 263#ifdef AMIGA_CONFIGURATION 264# wscons aware interface to amiga custom chips. Text-only console. 265# If you enable it enable also wskbd. 266# 267#amidisplaycc0 at mainbus0 # wscons interface to custom chips 268#wsdisplay0 at amidisplaycc0 console ? 269#options WSEMUL_VT100 270#endif 271 272#ifdef AMIGA_CONFIGURATION 273grfcc0 at mainbus0 # custom chips 274grfrt0 at zbus0 # retina II 275#endif 276grfrh0 at zbus0 # retina III 277#ifdef AMIGA_CONFIGURATION 278grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 279grful0 at zbus0 # A2410 280grfcv0 at zbus0 # CyberVision 64 281grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 282grfcv3d0 at zbus0 # CyberVision 64/3D 283#endif 284 285#ifdef AMIGA_CONFIGURATION 286grf0 at grfcc0 287grf1 at grfrt0 288#endif 289grf2 at grfrh0 290#ifdef AMIGA_CONFIGURATION 291grf3 at grfcl? 292grf4 at grful0 293grf5 at grfcv0 294grf6 at grfet? 295grf7 at grfcv3d0 296#endif 297#ifdef AMIGA_CONFIGURATION 298ite0 at grf0 # terminal emulators for grfs 299ite1 at grf1 # terminal emulators for grfs 300#endif 301ite2 at grf2 # terminal emulators for grfs 302#ifdef AMIGA_CONFIGURATION 303ite3 at grf3 # terminal emulators for grfs 304ite4 at grf4 # terminal emulators for grfs 305ite5 at grf5 # terminal emulators for grfs 306ite6 at grf6 # terminal emulators for grfs 307ite7 at grf7 # terminal emulators for grfs 308#endif 309 310msc0 at zbus0 # A2232 MSC multiport serial. 311mfc0 at zbus0 # MultiFaceCard I/O board 312mfcs0 at mfc0 unit 0 # MFC serial 313mfcs1 at mfc0 unit 1 # MFC serial 314#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 315#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 316#mfcs2 at mfc1 unit 0 317#mfcs3 at mfc1 unit 1 318#mfcp1 at mfc1 unit 0 319 320hyper* at zbus? # zbus HyperCom3/3+/4/4+ 321#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 322com* at hyper? port ? # Hypercom3/4 serial ports 323lpt* at hyper? port ? # Hypercom3+/4+ parallel port 324 325#options IOBZCLOCK=22118400 # default, uncomment the next line 326#options IOBZCLOCK=24000000 # if needed. 327 328iobl* at zbus? # zbus IOBlix 329com* at iobl? port ? # IOBlix serial ports 330lpt* at iobl? port ? # IOBlix parallel ports 331 332 333# 334# Keyboard device. Optionally can attach a wskbd. 335# wskbd works together with a wsdisplay so enable them both if you will. 336# Don't enable wskbd if you use ite. 337# 338# XXX in std.amiga: kbd0 at mainbus0 339#wskbd0 at kbd0 console ? 340 341 342#ifdef AMIGA_CONFIGURATION 343# 344# Amiga Mainboard devices (sans graphics and keyboard) 345# 346 347ser0 at mainbus0 # Amiga onboard serial 348par0 at mainbus0 # Amiga onboard parallel 349ms* at mainbus0 # Amiga mice 350fdc0 at mainbus0 # Amiga FDC 351fd* at fdc0 unit ? # floppy disks on the later 352a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 353a2kbbc0 at mainbus0 # A2000 battery backed clock 354aucc* at mainbus0 # Amiga CC audio 355audio* at aucc? 356#endif 357 358#ifdef DRACO_CONFIGURATION 359# 360# DraCo Mainboard devices (sans keyboard) 361# 362 363drbbc0 at mainbus0 # DraCo battery backed clock 364drsupio0 at mainbus0 # DraCo superio chip 365com* at drsupio? port ? # DraCo serial 366lpt0 at drsupio? port ? # DraCo parallel 367#endif 368 369# 370# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 371# 372 373#ifndef DRACO_CONFIGURATION 374# Alas, Melody-Z2 dont configure in the DraCo bus. 375melody* at zbus0 # Melody MPEG audio decoder 376audio* at melody? 377#endif 378 379repulse* at zbus0 # ALiENDESiGN Repulse 380audio* at repulse? 381 382# Ethernet cards: 383le* at zbus0 # A2065, Ameristar, Ariadne 384ne* at zbus0 # AriadneII, X-surf 385ed* at zbus0 # Hydra, ASDG LanRover 386es* at zbus0 # CEI A4066 EthernetPLUS 387qn* at zbus0 # Quicknet 388 389# Arcnet 390bah* at zbus0 # C=/Ameristar A2060 / 560 391 392#ifdef AMIGA_CONFIGURATION 393# Greater Valley Product Bus 394gvpbus* at zbus0 395 396# scsi stuff, all possible 397gtsc0 at gvpbus? # GVP series II scsi 398scsibus* at gtsc0 399ahsc0 at mainbus0 # A3000 scsi 400scsibus* at ahsc0 401atzsc0 at zbus0 # A2091 scsi 402scsibus* at atzsc0 403wstsc0 at zbus0 # Wordsync II scsi 404scsibus* at wstsc0 405ivsc0 at zbus0 # IVS scsi 406scsibus* at ivsc0 407mlhsc0 at zbus0 # Hacker scsi 408scsibus* at mlhsc0 409otgsc0 at zbus0 # 12 gauge scsi 410scsibus* at otgsc0 411zssc0 at zbus0 # Zeus scsi 412scsibus* at zssc0 413mgnsc0 at zbus0 # Magnum scsi 414scsibus* at mgnsc0 415wesc0 at zbus0 # Warp Engine scsi 416scsibus* at wesc0 417afsc0 at zbus0 # A4091 scsi 418scsibus* at afsc0 419aftsc0 at mainbus0 # A4000T scsi 420scsibus* at aftsc0 421flsc0 at zbus0 # FastlaneZ3 scsi 422scsibus* at flsc0 423bzsc0 at zbus0 # Blizzard 1230 I,II scsi 424scsibus* at bzsc0 425bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 426scsibus* at bzivsc0 427bztzsc0 at zbus0 # Blizzard 2060 scsi 428scsibus* at bztzsc0 429cbsc0 at zbus0 # CyberSCSI I 430scsibus* at cbsc0 431cbiisc0 at zbus0 # CyberSCSI II 432scsibus* at cbiisc0 433cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 434scsibus* at cbiiisc0 435empsc0 at zbus0 # Emplant scsi 436scsibus* at empsc0 437#idesc0 at mainbus0 # A4000 & A1200 IDE 438#scsibus* at idesc0 439 440# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 441# <<< are uncommented >>> 442wdc0 at mainbus0 # A4000 & A1200 IDE bus 443wd* at wdc? drive ? # + drives 444atapibus* at wdc? channel ? # ATAPI bus 445cd* at atapibus? drive ? # ATAPI CD-ROM drives 446sd* at atapibus? drive ? # ATAPI disk drives 447 448pccard0 at mainbus0 449pcmcia* at pccard0 450com* at pcmcia? function ? # Modems and serial cards 451pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 452aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 453wdc* at pcmcia? function ? 454awi* at pcmcia? function ? # BayStack 650 (802.11FH) 455ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 456mbe* at pcmcia? function ? # MB8696x based Ethernet 457ne* at pcmcia? function ? # NE2000-compatible Ethernet 458sm* at pcmcia? function ? # Megahertz Ethernet 459mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 460com* at mhzc? 461sm* at mhzc? 462 463#endif 464 465#ifdef DRACO_CONFIGURATION 466drsc0 at mainbus0 # DraCo scsi 467scsibus* at drsc0 468#endif 469 470 471# each hard drive from low target to high 472# will configure to the next available sd unit number 473sd* at scsibus? target ? lun ? # scsi disks 474st* at scsibus? target ? lun ? # scsi tapes 475cd* at scsibus? target ? lun ? # scsi cds 476ch* at scsibus? target ? lun ? # scsi autochangers 477#ifndef INSTALL_CONFIGURATION 478ss* at scsibus? target ? lun ? # scsi scanner 479uk* at scsibus? target ? lun ? # scsi unknown 480#endif 481 482pseudo-device loop # loopback network interface 483pseudo-device sl 1 # SLIP network interfaces 484pseudo-device ppp 1 # PPP network interfaces 485pseudo-device tun 1 # network tunnel line discipline 486#pseudo-device gre 2 # generic L3 over IP tunnel 487#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 488pseudo-device bpfilter 16 # Berkeley packet filter 489pseudo-device ipfilter # IP Filter package 490pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 491#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 492#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 493pseudo-device vlan # IEEE 802.1q encapsulation 494pseudo-device bridge # simple inter-network bridging 495 496pseudo-device view 4 # views (needed for grfcc) 497pseudo-device pty # pseudo-terminals 498 499pseudo-device vnd 4 # vnode pseudo-disks 500pseudo-device ccd 4 # concatenated disk devices 501#pseudo-device raid 4 # RAIDframe disk driver 502#options RAID_AUTOCONFIG # auto-configuration of RAID components 503 504pseudo-device rnd # /dev/random and in-kernel generator 505#options RND_COM # use "com" randomness as well (BROKEN) 506 507config netbsd root on ? type ? 508