Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.169
      1 # $NetBSD: GENERIC,v 1.169 2002/01/27 10:52:31 jdolecek Exp $
      2 #
      3 # GENERIC machine description file
      4 #
      5 # This machine description file is used to generate the default NetBSD
      6 # kernel.  The generic kernel does not include all options, subsystems
      7 # and device drivers, but should be useful for most applications.
      8 #
      9 # The machine description file can be customised for your specific
     10 # machine to reduce the kernel size and improve its performance.
     11 #
     12 # For further information on compiling NetBSD kernels, see the config(8)
     13 # man page.
     14 #
     15 # For further information on hardware support for this architecture, see
     16 # the intro(4) man page.  For further information about kernel options
     17 # for this architecture, see the options(4) man page.  For an explanation
     18 # of each device driver in this file see the section 4 man page for the
     19 # device.
     20 
     21 #
     22 #if 0
     23 # GENERIC Amiga or DraCo
     24 #
     25 # This configuration file contains all possible options
     26 #
     27 # make AMIGA extracts the AMIGA configuration file.
     28 # make DRACO extracts the DRACO configuration file.
     29 # make INSTALL extracts the INSTALL configuration file.
     30 #
     31 # commit them, too.
     32 #endif
     33 #
     34 
     35 include "arch/amiga/conf/std.amiga"
     36 
     37 #ident 		"GENERIC-$Revision: 1.169 $"
     38 
     39 #ifdef INSTALL_CONFIGURATION
     40 makeoptions	COPTS="-Os"
     41 #endif
     42 
     43 maxusers	8
     44 options 	RTC_OFFSET=0
     45 
     46 #
     47 # mainboards to support (in addition to Amiga)
     48 #
     49 #ifdef DRACO_CONFIGURATION
     50 options 	DRACO
     51 
     52 #endif
     53 #ifdef AMIGA_CONFIGURATION
     54 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     55 				# MC68060 with an OS ROM up to (at least)
     56 				# V40 (OS3.1) and want to boot with the
     57 				# bootblock.
     58 				# You do not need this if you have a DraCo,
     59 				# have no 68060 or NEVER use the bootblock
     60 options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
     61 #endif
     62 #
     63 # processors this kernel should support
     64 #
     65 options 	M68060		# support for 060
     66 options 	M060SP		# MC68060 software support (Required for 060)
     67 #ifdef AMIGA_CONFIGURATION
     68 options 	M68040		# support for 040
     69 options 	FPSP		# MC68040 floating point support
     70 options 	M68030		# support for 030
     71 options 	M68020		# support for 020/851
     72 options 	FPU_EMULATE	# FPU emulation
     73 #endif
     74 
     75 #
     76 # Networking options
     77 #
     78 options 	INET		# IP networking support (Required)
     79 options 	INET6		# IPV6
     80 #options 	IPSEC		# IP security
     81 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     82 #options 	IPSEC_DEBUG	# debug for IP security
     83 #options 	GATEWAY		# Packet forwarding
     84 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     85 
     86 #ifndef INSTALL_CONFIGURATION
     87 #options 	MROUTING	# Multicast routing
     88 options 	NS		# XNS
     89 #options 	NSIP		# XNS tunneling over IP
     90 options 	ISO,TPIP	# OSI
     91 #options 	EON		# OSI tunneling over IP
     92 options 	CCITT,LLC,HDLC	# X.25
     93 options 	NETATALK	# AppleTalk networking protocols
     94 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
     95 #endif
     96 
     97 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     98 options 	PPP_DEFLATE	# Deflate compression support for PPP
     99 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
    100 options 	PFIL_HOOKS	# pfil(9) packet filter hooks
    101 options 	IPFILTER_LOG	# ipmon(8) log support
    102 
    103 # Filesystems
    104 file-system 	FFS		# Berkeley fast file system
    105 file-system 	EXT2FS		# second extended file system (linux)
    106 #file-system 	LFS		# log-structured filesystem (experimental)
    107 
    108 #ifndef INSTALL_CONFIGURATION
    109 file-system 	MFS		# Memory based filesystem
    110 #endif
    111 
    112 file-system 	NFS		# Network File System client side code
    113 file-system 	ADOSFS		# AmigaDOS file system
    114 file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
    115 file-system 	MSDOSFS		# MS-DOS filesystem
    116 
    117 file-system 	KERNFS		# kernel data-structure filesystem
    118 
    119 #ifndef INSTALL_CONFIGURATION
    120 file-system 	FDESC		# user file descriptor filesystem
    121 file-system 	NULLFS		# loopback filesystem
    122 file-system 	OVERLAY		# overlay filesystem
    123 #file-system 	PORTAL		# Portal filesystem
    124 file-system 	PROCFS		# /proc filesystem
    125 file-system 	UMAPFS		# NULLFS + uid and gid remapping
    126 file-system 	UNION		# union filesystem
    127 #endif
    128 
    129 # Filesystem options
    130 
    131 #options 	FFS_EI		# FFS Endian Independant support
    132 
    133 #ifndef INSTALL_CONFIGURATION
    134 options 	QUOTA		# User and group quotas in FFS
    135 options 	SOFTDEP		# FFS soft updates support.
    136 options 	NFSSERVER	# Network File System server side code
    137 #endif
    138 
    139 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    140 				# immutable) behave as system flags.
    141 
    142 #
    143 # Compatibility options for various existing systems
    144 #
    145 
    146 #ifndef INSTALL_CONFIGURATION
    147 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
    148 options 	COMPAT_43	# compatibility with 4.3BSD interfaces
    149 options 	COMPAT_09	# compatibility with NetBSD 0.9
    150 options 	COMPAT_10	# compatibility with NetBSD 1.0
    151 options 	COMPAT_12	# compatibility with NetBSD 1.2
    152 options 	COMPAT_13	# compatibility with NetBSD 1.3
    153 options 	COMPAT_14	# compatibility with NetBSD 1.4
    154 options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
    155 options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
    156 options 	COMPAT_NOMID	# allow nonvalid machine id executables
    157 #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
    158 options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
    159 #endif
    160 
    161 #ifndef INSTALL_CONFIGURATION
    162 #
    163 # Support for System V IPC facilities.
    164 #
    165 options 	SYSVSHM		# System V-like shared memory
    166 options 	SYSVMSG		# System V-like messages
    167 options 	SYSVSEM		# System V-like semaphores
    168 #options 	SEMMNI=10	# number of semaphore identifiers
    169 #options 	SEMMNS=60	# number of semaphores in system
    170 #options 	SEMUME=10	# max number of undo entries per process
    171 #options 	SEMMNU=30	# number of undo structures in system
    172 #endif
    173 
    174 #
    175 # Support for various kernel options
    176 #
    177 
    178 #ifndef INSTALL_CONFIGURATION
    179 options 	KTRACE		# system call tracing support
    180 options 	LKM		# Loadable kernel modules
    181 options 	UCONSOLE	# anyone can redirect a virtual console
    182 #endif
    183 #options 	INSECURE	# disable kernel security levels
    184 options 	SCSIVERBOSE	# human readable SCSI error messages
    185 #ifndef INSTALL_CONFIGURATION
    186 options 	NTP		# NTP phase/frequency locked loop
    187 #endif
    188 
    189 #
    190 # Misc. debugging options
    191 #
    192 options 	DDB		# Kernel debugger
    193 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    194 options 	DIAGNOSTIC	# Extra kernel sanity checks
    195 #options 	DEBUG		# Enable misc. kernel debugging code
    196 #options 	SYSCALL_DEBUG	# debug all syscalls.
    197 #options 	SCSIDEBUG	# Add SCSI debugging statements
    198 #options 	PANICBUTTON	# Forced crash via keypress (???)
    199 
    200 #
    201 # Amiga specific options
    202 #
    203 #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    204 				# first bank of RAM. (default: unlimited)
    205 #options 	NKPTADD=4	# set this for 4 additional KPT pages
    206 #options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    207 				# per 16 MB (1<<24 bytes) of RAM
    208 				# define and decrease this, or define and
    209 				# increase NKPTADD if you get "out of PT pages"
    210 				# panics.
    211 
    212 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    213 # before the 10 secondinterval ends, or that KBDRESET does work at all.
    214 #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    215 
    216 # These options improve performance with the built-in serial port
    217 # on slower Amigas.  Try the larger buffers first then lev6_defer.
    218 #options 	SERIBUF_SIZE=4096
    219 #options 	SEROBUF_SIZE=32
    220 #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    221 
    222 options 	RETINACONSOLE	# enable code to allow retina to be console
    223 #ifdef AMIGA_CONFIGURATION
    224 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    225 options 	CL5426CONSOLE	# Cirrus console
    226 options 	CV64CONSOLE	# CyberVision console
    227 options 	TSENGCONSOLE	# Tseng console
    228 options 	CV3DCONSOLE	# CyberVision 64/3D console
    229 #endif
    230 
    231 #ifdef AMIGA_CONFIGURATION
    232 options 	GRF_ECS		# Enhanced Chip Set
    233 options 	GRF_NTSC	# NTSC
    234 options 	GRF_PAL		# PAL
    235 options 	GRF_A2024	# Support for the A2024
    236 options 	GRF_AGA		# AGA Chip Set
    237 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    238 options 	GRF_SUPER72	# AGA Super-72
    239 #endif
    240 #options 	KFONT_8X11	# 8x11 font
    241 
    242 # This is how you would tell the kernel the A2410 oscillator frequencies:
    243 # The used frequencies are the defaults, and do not need option setting
    244 #options 	ULOWELL_OSC1=36000000
    245 #options 	ULOWELL_OSC2=66667000
    246 
    247 # This is how you specify the blitting speed, higher values may speed up blits
    248 # a littel bit.  If you raise this value too much some trash may appear.
    249 # the commented version is the default.
    250 #options 	RH_MEMCLK=61000000
    251 # this option enables the 64 bit sprite which does not work
    252 # for quite a few people.  E.g. The cursor sprite will turn to a block
    253 # when moved to the top of the screen in X.
    254 #options 	RH_64BIT_SPRITE
    255 # enables fast scroll code appears to now work on 040 systems.
    256 #options 	RETINA_SPEED_HACK
    257 # enables the Hardwarecursor which does not work on some systems.
    258 #options 	RH_HARDWARECURSOR
    259 
    260 #ifdef AMIGA_CONFIGURATION
    261 # wscons aware interface to amiga custom chips.
    262 # If you enable it enable also wskbd.
    263 #
    264 #amidisplaycc0	at mainbus0		# wscons interface to custom chips
    265 #wsdisplay0	at amidisplaycc0 console ?
    266 #options	WSEMUL_VT100
    267 #options	FONT_BOLD8x16
    268 #options	FONT_VT220L8x10
    269 #endif
    270 
    271 #ifdef AMIGA_CONFIGURATION
    272 grfcc0		at mainbus0		# custom chips
    273 grfrt0		at zbus0		# retina II
    274 #endif
    275 grfrh0		at zbus0		# retina III
    276 #ifdef AMIGA_CONFIGURATION
    277 grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
    278 grful0		at zbus0		# A2410
    279 grfcv0		at zbus0		# CyberVision 64
    280 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    281 grfcv3d0	at zbus0		# CyberVision 64/3D
    282 #endif
    283 
    284 #ifdef AMIGA_CONFIGURATION
    285 grf0		at grfcc0
    286 grf1		at grfrt0
    287 #endif
    288 grf2		at grfrh0
    289 #ifdef AMIGA_CONFIGURATION
    290 grf3		at grfcl?
    291 grf4		at grful0
    292 grf5		at grfcv0
    293 grf6		at grfet?
    294 grf7		at grfcv3d0
    295 #endif
    296 #ifdef AMIGA_CONFIGURATION
    297 ite0		at grf0			# terminal emulators for grfs
    298 ite1		at grf1			# terminal emulators for grfs
    299 #endif
    300 ite2		at grf2			# terminal emulators for grfs
    301 #ifdef AMIGA_CONFIGURATION
    302 ite3		at grf3			# terminal emulators for grfs
    303 ite4		at grf4			# terminal emulators for grfs
    304 ite5		at grf5			# terminal emulators for grfs
    305 ite6		at grf6			# terminal emulators for grfs
    306 ite7		at grf7			# terminal emulators for grfs
    307 #endif
    308 
    309 msc0		at zbus0		# A2232 MSC multiport serial.
    310 mfc0		at zbus0		# MultiFaceCard I/O board
    311 mfcs0		at mfc0 unit 0		# MFC serial
    312 mfcs1		at mfc0 unit 1		# MFC serial
    313 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    314 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    315 #mfcs2		at mfc1 unit 0
    316 #mfcs3		at mfc1 unit 1
    317 #mfcp1		at mfc1 unit 0
    318 
    319 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    320 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    321 com*		at hyper? port ?	# Hypercom3/4 serial ports
    322 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    323 
    324 #options 	IOBZCLOCK=22118400 	# default, uncomment the next line
    325 #options 	IOBZCLOCK=24000000	# if needed.
    326 
    327 iobl*		at zbus?		# zbus IOBlix
    328 com*		at iobl? port ?		# IOBlix serial ports
    329 lpt*		at iobl? port ?		# IOBlix parallel ports
    330 
    331 
    332 #
    333 # Keyboard device. Optionally can attach a wskbd.
    334 # wskbd works together with a wsdisplay so enable them both if you will.
    335 # Don't enable wskbd if you use ite.
    336 #
    337 # XXX in std.amiga: kbd0 at mainbus0
    338 #wskbd0		at kbd0 console ?
    339 
    340 
    341 #ifdef AMIGA_CONFIGURATION
    342 #
    343 # Amiga Mainboard devices (sans graphics and keyboard)
    344 #
    345 
    346 ser0		at mainbus0		# Amiga onboard serial
    347 par0		at mainbus0		# Amiga onboard parallel
    348 ms*		at mainbus0		# Amiga mice
    349 fdc0		at mainbus0		# Amiga FDC
    350 fd*		at fdc0 unit ?		# floppy disks on the later
    351 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    352 a2kbbc0 	at mainbus0		# A2000 battery backed clock
    353 aucc*		at mainbus0		# Amiga CC audio
    354 audio*		at aucc?
    355 #endif
    356 
    357 #ifdef DRACO_CONFIGURATION
    358 #
    359 # DraCo Mainboard devices (sans keyboard)
    360 #
    361 
    362 drbbc0		at mainbus0		# DraCo battery backed clock
    363 drsupio0	at mainbus0		# DraCo superio chip
    364 com*		at drsupio? port ?	# DraCo serial
    365 lpt0		at drsupio? port ?	# DraCo parallel
    366 #endif
    367 
    368 #
    369 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    370 #
    371 
    372 #ifndef DRACO_CONFIGURATION
    373 # Alas, Melody-Z2 dont configure in the DraCo bus.
    374 melody* 	at zbus0		# Melody MPEG audio decoder
    375 audio*		at melody?
    376 #endif
    377 
    378 repulse*	at zbus0		# ALiENDESiGN Repulse
    379 audio*		at repulse?
    380 
    381 # Ethernet cards:
    382 le*		at zbus0		# A2065, Ameristar, Ariadne
    383 ne*		at zbus0		# AriadneII, X-surf
    384 ed*		at zbus0		# Hydra, ASDG LanRover
    385 es*		at zbus0		# CEI A4066 EthernetPLUS
    386 qn*		at zbus0		# Quicknet
    387 
    388 # Arcnet
    389 bah*		at zbus0		# C=/Ameristar A2060 / 560
    390 
    391 #ifdef AMIGA_CONFIGURATION
    392 # Greater Valley Product Bus
    393 gvpbus* 	at zbus0
    394 
    395 # scsi stuff, all possible
    396 gtsc0		at gvpbus?		# GVP series II scsi
    397 scsibus*	at gtsc0
    398 ahsc0		at mainbus0		# A3000 scsi
    399 scsibus*	at ahsc0
    400 atzsc0		at zbus0		# A2091 scsi
    401 scsibus*	at atzsc0
    402 wstsc0		at zbus0		# Wordsync II scsi
    403 scsibus*	at wstsc0
    404 ivsc0		at zbus0		# IVS scsi
    405 scsibus*	at ivsc0
    406 mlhsc0		at zbus0		# Hacker scsi
    407 scsibus*	at mlhsc0
    408 otgsc0		at zbus0		# 12 gauge scsi
    409 scsibus*	at otgsc0
    410 zssc0		at zbus0		# Zeus scsi
    411 scsibus*	at zssc0
    412 mgnsc0		at zbus0		# Magnum scsi
    413 scsibus*	at mgnsc0
    414 wesc0		at zbus0		# Warp Engine scsi
    415 scsibus*	at wesc0
    416 afsc0		at zbus0		# A4091 scsi
    417 scsibus*	at afsc0
    418 aftsc0		at mainbus0		# A4000T scsi
    419 scsibus*	at aftsc0
    420 flsc0		at zbus0		# FastlaneZ3 scsi
    421 scsibus*	at flsc0
    422 bzsc0		at zbus0		# Blizzard 1230 I,II scsi
    423 scsibus*	at bzsc0
    424 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
    425 scsibus*	at bzivsc0
    426 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    427 scsibus*	at bztzsc0
    428 cbsc0		at zbus0		# CyberSCSI I
    429 scsibus*	at cbsc0
    430 cbiisc0 	at zbus0		# CyberSCSI II
    431 scsibus*	at cbiisc0
    432 cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    433 scsibus*	at cbiiisc0
    434 empsc0		at zbus0		# Emplant scsi
    435 scsibus*	at empsc0
    436 #idesc0		at mainbus0		# A4000 & A1200 IDE
    437 #scsibus*	at idesc0
    438 
    439 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
    440 # <<< are uncommented >>>
    441 wdc0		at mainbus0		# A4000 & A1200 IDE bus
    442 wd*		at wdc? drive ?		#  + drives
    443 atapibus*	at wdc? channel ?	# ATAPI bus
    444 cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    445 sd*		at atapibus? drive ?	# ATAPI disk drives
    446 
    447 pccard0		at mainbus0
    448 pcmcia*		at pccard0
    449 com*		at pcmcia? function ?		# Modems and serial cards
    450 pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
    451 aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
    452 wdc*		at pcmcia? function ?
    453 awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
    454 ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    455 mbe*		at pcmcia? function ?		# MB8696x based Ethernet
    456 ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
    457 sm*		at pcmcia? function ?		# Megahertz Ethernet
    458 mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
    459 com*		at mhzc?
    460 sm*		at mhzc?
    461 
    462 #endif
    463 
    464 #ifdef DRACO_CONFIGURATION
    465 drsc0		at mainbus0		# DraCo scsi
    466 scsibus*	at drsc0
    467 #endif
    468 
    469 
    470 # each hard drive from low target to high
    471 # will configure to the next available sd unit number
    472 sd*	at scsibus? target ? lun ?	# scsi disks
    473 st*	at scsibus? target ? lun ?	# scsi tapes
    474 cd*	at scsibus? target ? lun ?	# scsi cds
    475 ch*	at scsibus? target ? lun ?	# scsi autochangers
    476 #ifndef INSTALL_CONFIGURATION
    477 ss*	at scsibus? target ? lun ?	# scsi scanner
    478 uk*	at scsibus? target ? lun ?	# scsi unknown
    479 #endif
    480 
    481 pseudo-device	loop			# loopback network interface
    482 pseudo-device	sl		1	# SLIP network interfaces
    483 pseudo-device	ppp		1	# PPP network interfaces
    484 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    485 pseudo-device	tun		1	# network tunnel line discipline
    486 #pseudo-device	gre		2	# generic L3 over IP tunnel
    487 #pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    488 pseudo-device	bpfilter	16	# Berkeley packet filter
    489 pseudo-device	ipfilter		# IP Filter package
    490 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    491 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    492 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    493 pseudo-device	vlan			# IEEE 802.1q encapsulation
    494 pseudo-device	bridge			# simple inter-network bridging
    495 
    496 pseudo-device	view		4	# views (needed for grfcc)
    497 pseudo-device	pty			# pseudo-terminals
    498 
    499 pseudo-device	vnd		4	# vnode pseudo-disks
    500 pseudo-device	ccd		4	# concatenated disk devices
    501 pseudo-device	raid		8	# RAIDframe disk driver
    502 options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    503 # Options to enable various other RAIDframe RAID types.
    504 # options	RF_INCLUDE_EVENODD=1
    505 # options	RF_INCLUDE_RAID5_RS=1
    506 # options	RF_INCLUDE_PARITYLOGGING=1
    507 # options	RF_INCLUDE_CHAINDECLUSTER=1
    508 # options	RF_INCLUDE_INTERDECLUSTER=1
    509 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    510 # options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    511 
    512 pseudo-device	rnd			# /dev/random and in-kernel generator
    513 #options 	RND_COM			# use "com" randomness as well (BROKEN)
    514 
    515 config	netbsd root on ? type ?
    516