GENERIC revision 1.170
1# $NetBSD: GENERIC,v 1.170 2002/01/27 11:07:38 jdolecek Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# 22#if 0 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make INSTALL extracts the INSTALL configuration file. 30# 31# commit them, too. 32#endif 33# 34 35include "arch/amiga/conf/std.amiga" 36 37#ident "GENERIC-$Revision: 1.170 $" 38 39#ifdef INSTALL_CONFIGURATION 40makeoptions COPTS="-Os" 41#endif 42 43maxusers 8 44options RTC_OFFSET=0 45 46# 47# mainboards to support (in addition to Amiga) 48# 49#ifdef DRACO_CONFIGURATION 50options DRACO 51 52#endif 53#ifdef AMIGA_CONFIGURATION 54options BB060STUPIDROM # You need this, if you have a non-DraCo 55 # MC68060 with an OS ROM up to (at least) 56 # V40 (OS3.1) and want to boot with the 57 # bootblock. 58 # You do not need this if you have a DraCo, 59 # have no 68060 or NEVER use the bootblock 60options P5PPC68KBOARD # Phase5 PPC/68K board support 61#endif 62# 63# processors this kernel should support 64# 65options M68060 # support for 060 66options M060SP # MC68060 software support (Required for 060) 67#ifdef AMIGA_CONFIGURATION 68options M68040 # support for 040 69options FPSP # MC68040 floating point support 70options M68030 # support for 030 71options M68020 # support for 020/851 72options FPU_EMULATE # FPU emulation 73#endif 74 75# 76# Networking options 77# 78options INET # IP networking support (Required) 79options INET6 # IPV6 80#options IPSEC # IP security 81#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 82#options IPSEC_DEBUG # debug for IP security 83#options GATEWAY # Packet forwarding 84#options DIRECTED_BROADCAST # Broadcast across subnets 85 86#ifndef INSTALL_CONFIGURATION 87#options MROUTING # Multicast routing 88options NS # XNS 89#options NSIP # XNS tunneling over IP 90options ISO,TPIP # OSI 91#options EON # OSI tunneling over IP 92options CCITT,LLC,HDLC # X.25 93options NETATALK # AppleTalk networking protocols 94#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 95#endif 96 97options PPP_BSDCOMP # BSD-Compress compression support for PPP 98options PPP_DEFLATE # Deflate compression support for PPP 99options PPP_FILTER # Active filter support for PPP (requires bpf) 100options PFIL_HOOKS # pfil(9) packet filter hooks 101options IPFILTER_LOG # ipmon(8) log support 102 103# Filesystems 104file-system FFS # Berkeley fast file system 105file-system EXT2FS # second extended file system (linux) 106#file-system LFS # log-structured filesystem (experimental) 107 108#ifndef INSTALL_CONFIGURATION 109file-system MFS # Memory based filesystem 110#endif 111 112file-system NFS # Network File System client side code 113file-system ADOSFS # AmigaDOS file system 114file-system CD9660 # ISO 9660 + Rock Ridge filesystem 115file-system MSDOSFS # MS-DOS filesystem 116 117file-system KERNFS # kernel data-structure filesystem 118 119#ifndef INSTALL_CONFIGURATION 120file-system FDESC # user file descriptor filesystem 121file-system NULLFS # loopback filesystem 122file-system OVERLAY # overlay filesystem 123#file-system PORTAL # Portal filesystem 124file-system PROCFS # /proc filesystem 125file-system UMAPFS # NULLFS + uid and gid remapping 126file-system UNION # union filesystem 127#endif 128 129# Filesystem options 130 131#options FFS_EI # FFS Endian Independant support 132 133#ifndef INSTALL_CONFIGURATION 134options QUOTA # User and group quotas in FFS 135options SOFTDEP # FFS soft updates support. 136options NFSSERVER # Network File System server side code 137#endif 138 139#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 140 # immutable) behave as system flags. 141 142# 143# Compatibility options for various existing systems 144# 145 146#ifndef INSTALL_CONFIGURATION 147#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 148options COMPAT_43 # compatibility with 4.3BSD interfaces 149options COMPAT_09 # compatibility with NetBSD 0.9 150options COMPAT_10 # compatibility with NetBSD 1.0 151options COMPAT_12 # compatibility with NetBSD 1.2 152options COMPAT_13 # compatibility with NetBSD 1.3 153options COMPAT_14 # compatibility with NetBSD 1.4 154options COMPAT_SUNOS # Support to run Sun (m68k) executables 155options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 156options COMPAT_NOMID # allow nonvalid machine id executables 157#options COMPAT_LINUX # Support to run Linux/m68k executables 158options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 159#endif 160 161#ifndef INSTALL_CONFIGURATION 162# 163# Support for System V IPC facilities. 164# 165options SYSVSHM # System V-like shared memory 166options SYSVMSG # System V-like messages 167options SYSVSEM # System V-like semaphores 168#options SEMMNI=10 # number of semaphore identifiers 169#options SEMMNS=60 # number of semaphores in system 170#options SEMUME=10 # max number of undo entries per process 171#options SEMMNU=30 # number of undo structures in system 172#endif 173 174# 175# Support for various kernel options 176# 177 178#ifndef INSTALL_CONFIGURATION 179options KTRACE # system call tracing support 180options LKM # Loadable kernel modules 181options UCONSOLE # anyone can redirect a virtual console 182#endif 183#options INSECURE # disable kernel security levels 184options SCSIVERBOSE # human readable SCSI error messages 185#ifndef INSTALL_CONFIGURATION 186options NTP # NTP phase/frequency locked loop 187#endif 188 189# 190# Misc. debugging options 191# 192options DDB # Kernel debugger 193#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 194options DIAGNOSTIC # Extra kernel sanity checks 195#options DEBUG # Enable misc. kernel debugging code 196#options SYSCALL_DEBUG # debug all syscalls. 197#options SCSIDEBUG # Add SCSI debugging statements 198#options PANICBUTTON # Forced crash via keypress (???) 199 200# 201# Amiga specific options 202# 203#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 204 # first bank of RAM. (default: unlimited) 205#options NKPTADD=4 # set this for 4 additional KPT pages 206#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 207 # per 16 MB (1<<24 bytes) of RAM 208 # uncomment and decrease this, or uncomment and 209 # increase NKPTADD if you get "out of PT pages" 210 # panics. 211 212# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 213# before the 10 secondinterval ends, or that KBDRESET does work at all. 214#options KBDRESET # sync on Ctrl-Amiga-Amiga 215 216# These options improve performance with the built-in serial port 217# on slower Amigas. Try the larger buffers first then lev6_defer. 218#options SERIBUF_SIZE=4096 219#options SEROBUF_SIZE=32 220#options LEV6_DEFER # defers l6 to l4 (below serial l5) 221 222options RETINACONSOLE # enable code to allow retina to be console 223#ifdef AMIGA_CONFIGURATION 224options ULOWELLCONSOLE # enable code to allow a2410 to be console 225options CL5426CONSOLE # Cirrus console 226options CV64CONSOLE # CyberVision console 227options TSENGCONSOLE # Tseng console 228options CV3DCONSOLE # CyberVision 64/3D console 229#endif 230 231#ifdef AMIGA_CONFIGURATION 232options GRF_ECS # Enhanced Chip Set 233options GRF_NTSC # NTSC 234options GRF_PAL # PAL 235options GRF_A2024 # Support for the A2024 236options GRF_AGA # AGA Chip Set 237options GRF_AGA_VGA # AGA VGAONLY timing 238options GRF_SUPER72 # AGA Super-72 239#endif 240#options KFONT_8X11 # 8x11 font 241 242# This is how you would tell the kernel the A2410 oscillator frequencies: 243# The used frequencies are the defaults, and do not need option setting 244#options ULOWELL_OSC1=36000000 245#options ULOWELL_OSC2=66667000 246 247# This is how you specify the blitting speed, higher values may speed up blits 248# a littel bit. If you raise this value too much some trash may appear. 249# the commented version is the default. 250#options RH_MEMCLK=61000000 251# this option enables the 64 bit sprite which does not work 252# for quite a few people. E.g. The cursor sprite will turn to a block 253# when moved to the top of the screen in X. 254#options RH_64BIT_SPRITE 255# enables fast scroll code appears to now work on 040 systems. 256#options RETINA_SPEED_HACK 257# enables the Hardwarecursor which does not work on some systems. 258#options RH_HARDWARECURSOR 259 260#ifdef AMIGA_CONFIGURATION 261# wscons aware interface to amiga custom chips. 262# If you enable it enable also wskbd. 263# 264#amidisplaycc0 at mainbus0 # wscons interface to custom chips 265#wsdisplay0 at amidisplaycc0 console ? 266#options WSEMUL_VT100 267#options FONT_BOLD8x16 268#options FONT_VT220L8x10 269#endif 270 271#ifdef AMIGA_CONFIGURATION 272grfcc0 at mainbus0 # custom chips 273grfrt0 at zbus0 # retina II 274#endif 275grfrh0 at zbus0 # retina III 276#ifdef AMIGA_CONFIGURATION 277grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 278grful0 at zbus0 # A2410 279grfcv0 at zbus0 # CyberVision 64 280grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 281grfcv3d0 at zbus0 # CyberVision 64/3D 282#endif 283 284#ifdef AMIGA_CONFIGURATION 285grf0 at grfcc0 286grf1 at grfrt0 287#endif 288grf2 at grfrh0 289#ifdef AMIGA_CONFIGURATION 290grf3 at grfcl? 291grf4 at grful0 292grf5 at grfcv0 293grf6 at grfet? 294grf7 at grfcv3d0 295#endif 296#ifdef AMIGA_CONFIGURATION 297ite0 at grf0 # terminal emulators for grfs 298ite1 at grf1 # terminal emulators for grfs 299#endif 300ite2 at grf2 # terminal emulators for grfs 301#ifdef AMIGA_CONFIGURATION 302ite3 at grf3 # terminal emulators for grfs 303ite4 at grf4 # terminal emulators for grfs 304ite5 at grf5 # terminal emulators for grfs 305ite6 at grf6 # terminal emulators for grfs 306ite7 at grf7 # terminal emulators for grfs 307#endif 308 309msc0 at zbus0 # A2232 MSC multiport serial. 310mfc0 at zbus0 # MultiFaceCard I/O board 311mfcs0 at mfc0 unit 0 # MFC serial 312mfcs1 at mfc0 unit 1 # MFC serial 313#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 314#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 315#mfcs2 at mfc1 unit 0 316#mfcs3 at mfc1 unit 1 317#mfcp1 at mfc1 unit 0 318 319hyper* at zbus? # zbus HyperCom3/3+/4/4+ 320#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 321com* at hyper? port ? # Hypercom3/4 serial ports 322lpt* at hyper? port ? # Hypercom3+/4+ parallel port 323 324#options IOBZCLOCK=22118400 # default, uncomment the next line 325#options IOBZCLOCK=24000000 # if needed. 326 327iobl* at zbus? # zbus IOBlix 328com* at iobl? port ? # IOBlix serial ports 329lpt* at iobl? port ? # IOBlix parallel ports 330 331 332# 333# Keyboard device. Optionally can attach a wskbd. 334# wskbd works together with a wsdisplay so enable them both if you will. 335# Don't enable wskbd if you use ite. 336# 337# XXX in std.amiga: kbd0 at mainbus0 338#wskbd0 at kbd0 console ? 339 340 341#ifdef AMIGA_CONFIGURATION 342# 343# Amiga Mainboard devices (sans graphics and keyboard) 344# 345 346ser0 at mainbus0 # Amiga onboard serial 347par0 at mainbus0 # Amiga onboard parallel 348ms* at mainbus0 # Amiga mice 349fdc0 at mainbus0 # Amiga FDC 350fd* at fdc0 unit ? # floppy disks on the later 351a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 352a2kbbc0 at mainbus0 # A2000 battery backed clock 353aucc* at mainbus0 # Amiga CC audio 354audio* at aucc? 355#endif 356 357#ifdef DRACO_CONFIGURATION 358# 359# DraCo Mainboard devices (sans keyboard) 360# 361 362drbbc0 at mainbus0 # DraCo battery backed clock 363drsupio0 at mainbus0 # DraCo superio chip 364com* at drsupio? port ? # DraCo serial 365lpt0 at drsupio? port ? # DraCo parallel 366#endif 367 368# 369# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 370# 371 372#ifndef DRACO_CONFIGURATION 373# Alas, Melody-Z2 dont configure in the DraCo bus. 374melody* at zbus0 # Melody MPEG audio decoder 375audio* at melody? 376#endif 377 378repulse* at zbus0 # ALiENDESiGN Repulse 379audio* at repulse? 380 381# Ethernet cards: 382le* at zbus0 # A2065, Ameristar, Ariadne 383ne* at zbus0 # AriadneII, X-surf 384ed* at zbus0 # Hydra, ASDG LanRover 385es* at zbus0 # CEI A4066 EthernetPLUS 386qn* at zbus0 # Quicknet 387 388# Arcnet 389bah* at zbus0 # C=/Ameristar A2060 / 560 390 391#ifdef AMIGA_CONFIGURATION 392# Greater Valley Product Bus 393gvpbus* at zbus0 394 395# scsi stuff, all possible 396gtsc0 at gvpbus? # GVP series II scsi 397scsibus* at gtsc0 398ahsc0 at mainbus0 # A3000 scsi 399scsibus* at ahsc0 400atzsc0 at zbus0 # A2091 scsi 401scsibus* at atzsc0 402wstsc0 at zbus0 # Wordsync II scsi 403scsibus* at wstsc0 404ivsc0 at zbus0 # IVS scsi 405scsibus* at ivsc0 406mlhsc0 at zbus0 # Hacker scsi 407scsibus* at mlhsc0 408otgsc0 at zbus0 # 12 gauge scsi 409scsibus* at otgsc0 410zssc0 at zbus0 # Zeus scsi 411scsibus* at zssc0 412mgnsc0 at zbus0 # Magnum scsi 413scsibus* at mgnsc0 414wesc0 at zbus0 # Warp Engine scsi 415scsibus* at wesc0 416afsc0 at zbus0 # A4091 scsi 417scsibus* at afsc0 418aftsc0 at mainbus0 # A4000T scsi 419scsibus* at aftsc0 420flsc0 at zbus0 # FastlaneZ3 scsi 421scsibus* at flsc0 422bzsc0 at zbus0 # Blizzard 1230 I,II scsi 423scsibus* at bzsc0 424bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 425scsibus* at bzivsc0 426bztzsc0 at zbus0 # Blizzard 2060 scsi 427scsibus* at bztzsc0 428cbsc0 at zbus0 # CyberSCSI I 429scsibus* at cbsc0 430cbiisc0 at zbus0 # CyberSCSI II 431scsibus* at cbiisc0 432cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 433scsibus* at cbiiisc0 434empsc0 at zbus0 # Emplant scsi 435scsibus* at empsc0 436#idesc0 at mainbus0 # A4000 & A1200 IDE 437#scsibus* at idesc0 438 439# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 440# <<< are uncommented >>> 441wdc0 at mainbus0 # A4000 & A1200 IDE bus 442wd* at wdc? drive ? # + drives 443atapibus* at wdc? channel ? # ATAPI bus 444cd* at atapibus? drive ? # ATAPI CD-ROM drives 445sd* at atapibus? drive ? # ATAPI disk drives 446 447pccard0 at mainbus0 448pcmcia* at pccard0 449com* at pcmcia? function ? # Modems and serial cards 450pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 451aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 452wdc* at pcmcia? function ? 453awi* at pcmcia? function ? # BayStack 650 (802.11FH) 454ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 455mbe* at pcmcia? function ? # MB8696x based Ethernet 456ne* at pcmcia? function ? # NE2000-compatible Ethernet 457sm* at pcmcia? function ? # Megahertz Ethernet 458mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 459com* at mhzc? 460sm* at mhzc? 461 462#endif 463 464#ifdef DRACO_CONFIGURATION 465drsc0 at mainbus0 # DraCo scsi 466scsibus* at drsc0 467#endif 468 469 470# each hard drive from low target to high 471# will configure to the next available sd unit number 472sd* at scsibus? target ? lun ? # scsi disks 473st* at scsibus? target ? lun ? # scsi tapes 474cd* at scsibus? target ? lun ? # scsi cds 475ch* at scsibus? target ? lun ? # scsi autochangers 476#ifndef INSTALL_CONFIGURATION 477ss* at scsibus? target ? lun ? # scsi scanner 478uk* at scsibus? target ? lun ? # scsi unknown 479#endif 480 481pseudo-device loop # loopback network interface 482pseudo-device sl 1 # SLIP network interfaces 483pseudo-device ppp 1 # PPP network interfaces 484pseudo-device pppoe # PPP over Ethernet (RFC 2516) 485pseudo-device tun 1 # network tunnel line discipline 486#pseudo-device gre 2 # generic L3 over IP tunnel 487#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 488pseudo-device bpfilter 16 # Berkeley packet filter 489pseudo-device ipfilter # IP Filter package 490pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 491#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 492#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 493pseudo-device vlan # IEEE 802.1q encapsulation 494pseudo-device bridge # simple inter-network bridging 495 496pseudo-device view 4 # views (needed for grfcc) 497pseudo-device pty # pseudo-terminals 498 499pseudo-device vnd 4 # vnode pseudo-disks 500pseudo-device ccd 4 # concatenated disk devices 501pseudo-device raid 8 # RAIDframe disk driver 502options RAID_AUTOCONFIG # auto-configuration of RAID components 503# Options to enable various other RAIDframe RAID types. 504# options RF_INCLUDE_EVENODD=1 505# options RF_INCLUDE_RAID5_RS=1 506# options RF_INCLUDE_PARITYLOGGING=1 507# options RF_INCLUDE_CHAINDECLUSTER=1 508# options RF_INCLUDE_INTERDECLUSTER=1 509# options RF_INCLUDE_PARITY_DECLUSTERING=1 510# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 511 512pseudo-device rnd # /dev/random and in-kernel generator 513#options RND_COM # use "com" randomness as well (BROKEN) 514 515config netbsd root on ? type ? 516