GENERIC revision 1.173
1 # $NetBSD: GENERIC,v 1.173 2002/01/27 13:27:51 is Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 # 22 #if 0 23 # GENERIC Amiga or DraCo 24 # 25 # This configuration file contains all possible options 26 # 27 # make AMIGA extracts the AMIGA configuration file. 28 # make DRACO extracts the DRACO configuration file. 29 # make INSTALL extracts the INSTALL configuration file. 30 # 31 # commit them, too. 32 #endif 33 # 34 35 include "arch/amiga/conf/std.amiga" 36 37 #ident "GENERIC-$Revision: 1.173 $" 38 39 #ifdef INSTALL_CONFIGURATION 40 makeoptions COPTS="-Os" 41 #endif 42 43 maxusers 8 44 options RTC_OFFSET=0 45 46 # 47 # mainboards to support (in addition to Amiga) 48 # 49 #ifdef DRACO_CONFIGURATION 50 options DRACO 51 52 #endif 53 #ifdef AMIGA_CONFIGURATION 54 options BB060STUPIDROM # You need this, if you have a non-DraCo 55 # MC68060 with an OS ROM up to (at least) 56 # V40 (OS3.1) and want to boot with the 57 # bootblock. 58 # You do not need this if you have a DraCo, 59 # have no 68060 or NEVER use the bootblock 60 options P5PPC68KBOARD # Phase5 PPC/68K board support 61 #endif 62 # 63 # processors this kernel should support 64 # 65 options M68060 # support for 060 66 options M060SP # MC68060 software support (Required for 060) 67 #ifdef AMIGA_CONFIGURATION 68 options M68040 # support for 040 69 options FPSP # MC68040 floating point support 70 options M68030 # support for 030 71 options M68020 # support for 020/851 72 options FPU_EMULATE # FPU emulation 73 #endif 74 75 # 76 # Networking options 77 # 78 options INET # IP networking support (Required) 79 options INET6 # IPV6 80 #options IPSEC # IP security 81 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 82 #options IPSEC_DEBUG # debug for IP security 83 #options GATEWAY # Packet forwarding 84 #options DIRECTED_BROADCAST # Broadcast across subnets 85 86 #ifndef INSTALL_CONFIGURATION 87 #options MROUTING # Multicast routing 88 options NS # XNS 89 #options NSIP # XNS tunneling over IP 90 options ISO,TPIP # OSI 91 #options EON # OSI tunneling over IP 92 options CCITT,LLC,HDLC # X.25 93 options NETATALK # AppleTalk networking protocols 94 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 95 #endif 96 97 options PPP_BSDCOMP # BSD-Compress compression support for PPP 98 options PPP_DEFLATE # Deflate compression support for PPP 99 options PPP_FILTER # Active filter support for PPP (requires bpf) 100 options PFIL_HOOKS # pfil(9) packet filter hooks 101 options IPFILTER_LOG # ipmon(8) log support 102 103 # Filesystems 104 file-system FFS # Berkeley fast file system 105 file-system EXT2FS # second extended file system (linux) 106 #file-system LFS # log-structured filesystem (experimental) 107 108 #ifndef INSTALL_CONFIGURATION 109 file-system MFS # Memory based filesystem 110 #endif 111 112 file-system NFS # Network File System client side code 113 file-system ADOSFS # AmigaDOS file system 114 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 115 file-system MSDOSFS # MS-DOS filesystem 116 117 file-system KERNFS # kernel data-structure filesystem 118 119 #ifndef INSTALL_CONFIGURATION 120 file-system FDESC # user file descriptor filesystem 121 file-system NULLFS # loopback filesystem 122 file-system OVERLAY # overlay filesystem 123 #file-system PORTAL # Portal filesystem 124 file-system PROCFS # /proc filesystem 125 file-system UMAPFS # NULLFS + uid and gid remapping 126 file-system UNION # union filesystem 127 #endif 128 129 # Filesystem options 130 131 #options FFS_EI # FFS Endian Independant support 132 133 #ifndef INSTALL_CONFIGURATION 134 options QUOTA # User and group quotas in FFS 135 options SOFTDEP # FFS soft updates support. 136 options NFSSERVER # Network File System server side code 137 #endif 138 139 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 140 # immutable) behave as system flags. 141 142 # 143 # Compatibility options for various existing systems 144 # 145 146 #ifndef INSTALL_CONFIGURATION 147 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 148 options COMPAT_43 # compatibility with 4.3BSD interfaces 149 options COMPAT_09 # compatibility with NetBSD 0.9 150 options COMPAT_10 # compatibility with NetBSD 1.0 151 options COMPAT_12 # compatibility with NetBSD 1.2 152 options COMPAT_13 # compatibility with NetBSD 1.3 153 options COMPAT_14 # compatibility with NetBSD 1.4 154 options COMPAT_SUNOS # Support to run Sun (m68k) executables 155 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 156 options COMPAT_NOMID # allow nonvalid machine id executables 157 #options COMPAT_LINUX # Support to run Linux/m68k executables 158 options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 159 #endif 160 161 #ifndef INSTALL_CONFIGURATION 162 # 163 # Support for System V IPC facilities. 164 # 165 options SYSVSHM # System V-like shared memory 166 options SYSVMSG # System V-like messages 167 options SYSVSEM # System V-like semaphores 168 #options SEMMNI=10 # number of semaphore identifiers 169 #options SEMMNS=60 # number of semaphores in system 170 #options SEMUME=10 # max number of undo entries per process 171 #options SEMMNU=30 # number of undo structures in system 172 #endif 173 174 # 175 # Support for various kernel options 176 # 177 178 #ifndef INSTALL_CONFIGURATION 179 options KTRACE # system call tracing support 180 options LKM # Loadable kernel modules 181 options UCONSOLE # anyone can redirect a virtual console 182 #endif 183 #options INSECURE # disable kernel security levels 184 options SCSIVERBOSE # human readable SCSI error messages 185 #ifndef INSTALL_CONFIGURATION 186 options NTP # NTP phase/frequency locked loop 187 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 188 #else 189 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 190 #endif 191 192 # 193 # Misc. debugging options 194 # 195 options DDB # Kernel debugger 196 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 197 options DIAGNOSTIC # Extra kernel sanity checks 198 #options DEBUG # Enable misc. kernel debugging code 199 #options SYSCALL_DEBUG # debug all syscalls. 200 #options SCSIDEBUG # Add SCSI debugging statements 201 #options PANICBUTTON # Forced crash via keypress (???) 202 203 # 204 # Amiga specific options 205 # 206 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 207 # first bank of RAM. (default: unlimited) 208 #options NKPTADD=4 # set this for 4 additional KPT pages 209 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 210 # per 16 MB (1<<24 bytes) of RAM 211 # uncomment and decrease this, or uncomment and 212 # increase NKPTADD if you get "out of PT pages" 213 # panics. 214 215 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 216 # before the 10 secondinterval ends, or that KBDRESET does work at all. 217 #options KBDRESET # sync on Ctrl-Amiga-Amiga 218 219 # These options improve performance with the built-in serial port 220 # on slower Amigas. Try the larger buffers first then lev6_defer. 221 #options SERIBUF_SIZE=4096 222 #options SEROBUF_SIZE=32 223 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 224 225 options RETINACONSOLE # enable code to allow retina to be console 226 #ifdef AMIGA_CONFIGURATION 227 options ULOWELLCONSOLE # enable code to allow a2410 to be console 228 options CL5426CONSOLE # Cirrus console 229 options CV64CONSOLE # CyberVision console 230 options TSENGCONSOLE # Tseng console 231 options CV3DCONSOLE # CyberVision 64/3D console 232 #endif 233 234 #ifdef AMIGA_CONFIGURATION 235 options GRF_ECS # Enhanced Chip Set 236 options GRF_NTSC # NTSC 237 options GRF_PAL # PAL 238 options GRF_A2024 # Support for the A2024 239 options GRF_AGA # AGA Chip Set 240 options GRF_AGA_VGA # AGA VGAONLY timing 241 options GRF_SUPER72 # AGA Super-72 242 #endif 243 #options KFONT_8X11 # 8x11 font 244 245 # This is how you would tell the kernel the A2410 oscillator frequencies: 246 # The used frequencies are the defaults, and do not need option setting 247 #options ULOWELL_OSC1=36000000 248 #options ULOWELL_OSC2=66667000 249 250 # This is how you specify the blitting speed, higher values may speed up blits 251 # a littel bit. If you raise this value too much some trash may appear. 252 # the commented version is the default. 253 #options RH_MEMCLK=61000000 254 # this option enables the 64 bit sprite which does not work 255 # for quite a few people. E.g. The cursor sprite will turn to a block 256 # when moved to the top of the screen in X. 257 #options RH_64BIT_SPRITE 258 # enables fast scroll code appears to now work on 040 systems. 259 #options RETINA_SPEED_HACK 260 # enables the Hardwarecursor which does not work on some systems. 261 #options RH_HARDWARECURSOR 262 263 #ifdef AMIGA_CONFIGURATION 264 # wscons aware interface to amiga custom chips. 265 # If you enable it enable also wskbd. 266 # 267 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 268 #wsdisplay0 at amidisplaycc0 console ? 269 #options WSEMUL_VT100 270 #options FONT_BOLD8x16 271 #options FONT_VT220L8x10 272 #endif 273 274 #ifdef AMIGA_CONFIGURATION 275 grfcc0 at mainbus0 # custom chips 276 grfrt0 at zbus0 # retina II 277 #endif 278 grfrh0 at zbus0 # retina III 279 #ifdef AMIGA_CONFIGURATION 280 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 281 grful0 at zbus0 # A2410 282 grfcv0 at zbus0 # CyberVision 64 283 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 284 grfcv3d0 at zbus0 # CyberVision 64/3D 285 #endif 286 287 #ifdef AMIGA_CONFIGURATION 288 grf0 at grfcc0 289 grf1 at grfrt0 290 #endif 291 grf2 at grfrh0 292 #ifdef AMIGA_CONFIGURATION 293 grf3 at grfcl? 294 grf4 at grful0 295 grf5 at grfcv0 296 grf6 at grfet? 297 grf7 at grfcv3d0 298 #endif 299 #ifdef AMIGA_CONFIGURATION 300 ite0 at grf0 # terminal emulators for grfs 301 ite1 at grf1 # terminal emulators for grfs 302 #endif 303 ite2 at grf2 # terminal emulators for grfs 304 #ifdef AMIGA_CONFIGURATION 305 ite3 at grf3 # terminal emulators for grfs 306 ite4 at grf4 # terminal emulators for grfs 307 ite5 at grf5 # terminal emulators for grfs 308 ite6 at grf6 # terminal emulators for grfs 309 ite7 at grf7 # terminal emulators for grfs 310 #endif 311 312 msc0 at zbus0 # A2232 MSC multiport serial. 313 mfc0 at zbus0 # MultiFaceCard I/O board 314 mfcs0 at mfc0 unit 0 # MFC serial 315 mfcs1 at mfc0 unit 1 # MFC serial 316 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 317 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 318 #mfcs2 at mfc1 unit 0 319 #mfcs3 at mfc1 unit 1 320 #mfcp1 at mfc1 unit 0 321 322 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 323 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 324 com* at hyper? port ? # Hypercom3/4 serial ports 325 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 326 327 #options IOBZCLOCK=22118400 # default, uncomment the next line 328 #options IOBZCLOCK=24000000 # if needed. 329 330 iobl* at zbus? # zbus IOBlix 331 com* at iobl? port ? # IOBlix serial ports 332 lpt* at iobl? port ? # IOBlix parallel ports 333 334 335 # 336 # Keyboard device. Optionally can attach a wskbd. 337 # wskbd works together with a wsdisplay so enable them both if you will. 338 # Don't enable wskbd if you use ite. 339 # 340 # XXX in std.amiga: kbd0 at mainbus0 341 #wskbd0 at kbd0 console ? 342 343 344 #ifdef AMIGA_CONFIGURATION 345 # 346 # Amiga Mainboard devices (sans graphics and keyboard) 347 # 348 349 ser0 at mainbus0 # Amiga onboard serial 350 par0 at mainbus0 # Amiga onboard parallel 351 ms* at mainbus0 # Amiga mice 352 fdc0 at mainbus0 # Amiga FDC 353 fd* at fdc0 unit ? # floppy disks on the later 354 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 355 a2kbbc0 at mainbus0 # A2000 battery backed clock 356 #ifndef INSTALL_CONFIGURATION 357 aucc* at mainbus0 # Amiga CC audio 358 audio* at aucc? 359 #endif 360 #endif 361 362 #ifdef DRACO_CONFIGURATION 363 # 364 # DraCo Mainboard devices (sans keyboard) 365 # 366 367 drbbc0 at mainbus0 # DraCo battery backed clock 368 drsupio0 at mainbus0 # DraCo superio chip 369 com* at drsupio? port ? # DraCo serial 370 lpt0 at drsupio? port ? # DraCo parallel 371 #endif 372 373 # 374 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 375 # 376 377 #ifndef INSTALL_CONFIGURATION 378 #ifndef DRACO_CONFIGURATION 379 # Alas, Melody-Z2 dont configure in the DraCo bus. 380 melody* at zbus0 # Melody MPEG audio decoder 381 audio* at melody? 382 #endif 383 384 repulse* at zbus0 # ALiENDESiGN Repulse 385 audio* at repulse? 386 387 toccata* at zbus0 # MacroSystem GmbH Toccata 388 audio* at toccata? 389 #endif 390 391 # Ethernet cards: 392 le* at zbus0 # A2065, Ameristar, Ariadne 393 ne* at zbus0 # AriadneII, X-surf 394 ed* at zbus0 # Hydra, ASDG LanRover 395 es* at zbus0 # CEI A4066 EthernetPLUS 396 qn* at zbus0 # Quicknet 397 398 # Arcnet 399 bah* at zbus0 # C=/Ameristar A2060 / 560 400 401 #ifdef AMIGA_CONFIGURATION 402 # Greater Valley Product Bus 403 gvpbus* at zbus0 404 405 # scsi stuff, all possible 406 gtsc0 at gvpbus? # GVP series II scsi 407 scsibus* at gtsc0 408 ahsc0 at mainbus0 # A3000 scsi 409 scsibus* at ahsc0 410 atzsc0 at zbus0 # A2091 scsi 411 scsibus* at atzsc0 412 wstsc0 at zbus0 # Wordsync II scsi 413 scsibus* at wstsc0 414 ivsc0 at zbus0 # IVS scsi 415 scsibus* at ivsc0 416 mlhsc0 at zbus0 # Hacker scsi 417 scsibus* at mlhsc0 418 otgsc0 at zbus0 # 12 gauge scsi 419 scsibus* at otgsc0 420 zssc0 at zbus0 # Zeus scsi 421 scsibus* at zssc0 422 mgnsc0 at zbus0 # Magnum scsi 423 scsibus* at mgnsc0 424 wesc0 at zbus0 # Warp Engine scsi 425 scsibus* at wesc0 426 afsc0 at zbus0 # A4091 scsi 427 scsibus* at afsc0 428 aftsc0 at mainbus0 # A4000T scsi 429 scsibus* at aftsc0 430 flsc0 at zbus0 # FastlaneZ3 scsi 431 scsibus* at flsc0 432 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 433 scsibus* at bzsc0 434 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 435 scsibus* at bzivsc0 436 bztzsc0 at zbus0 # Blizzard 2060 scsi 437 scsibus* at bztzsc0 438 cbsc0 at zbus0 # CyberSCSI I 439 scsibus* at cbsc0 440 cbiisc0 at zbus0 # CyberSCSI II 441 scsibus* at cbiisc0 442 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 443 scsibus* at cbiiisc0 444 empsc0 at zbus0 # Emplant scsi 445 scsibus* at empsc0 446 #idesc0 at mainbus0 # A4000 & A1200 IDE 447 #scsibus* at idesc0 448 449 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 450 # <<< are uncommented >>> 451 wdc0 at mainbus0 # A4000 & A1200 IDE bus 452 wd* at wdc? drive ? # + drives 453 atapibus* at wdc? channel ? # ATAPI bus 454 cd* at atapibus? drive ? # ATAPI CD-ROM drives 455 sd* at atapibus? drive ? # ATAPI disk drives 456 457 pccard0 at mainbus0 458 pcmcia* at pccard0 459 com* at pcmcia? function ? # Modems and serial cards 460 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 461 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 462 wdc* at pcmcia? function ? 463 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 464 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 465 mbe* at pcmcia? function ? # MB8696x based Ethernet 466 ne* at pcmcia? function ? # NE2000-compatible Ethernet 467 sm* at pcmcia? function ? # Megahertz Ethernet 468 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 469 com* at mhzc? 470 sm* at mhzc? 471 472 #endif 473 474 #ifdef DRACO_CONFIGURATION 475 drsc0 at mainbus0 # DraCo scsi 476 scsibus* at drsc0 477 #endif 478 479 480 # each hard drive from low target to high 481 # will configure to the next available sd unit number 482 sd* at scsibus? target ? lun ? # scsi disks 483 st* at scsibus? target ? lun ? # scsi tapes 484 cd* at scsibus? target ? lun ? # scsi cds 485 ch* at scsibus? target ? lun ? # scsi autochangers 486 #ifndef INSTALL_CONFIGURATION 487 ss* at scsibus? target ? lun ? # scsi scanner 488 uk* at scsibus? target ? lun ? # scsi unknown 489 #endif 490 491 pseudo-device loop # loopback network interface 492 pseudo-device sl 1 # SLIP network interfaces 493 pseudo-device ppp 1 # PPP network interfaces 494 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 495 pseudo-device tun 1 # network tunnel line discipline 496 #pseudo-device gre 2 # generic L3 over IP tunnel 497 #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 498 pseudo-device bpfilter 16 # Berkeley packet filter 499 pseudo-device ipfilter # IP Filter package 500 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 501 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 502 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 503 pseudo-device vlan # IEEE 802.1q encapsulation 504 pseudo-device bridge # simple inter-network bridging 505 506 pseudo-device view 4 # views (needed for grfcc) 507 pseudo-device pty # pseudo-terminals 508 509 pseudo-device vnd 4 # vnode pseudo-disks 510 pseudo-device ccd 4 # concatenated disk devices 511 pseudo-device raid 8 # RAIDframe disk driver 512 options RAID_AUTOCONFIG # auto-configuration of RAID components 513 # Options to enable various other RAIDframe RAID types. 514 # options RF_INCLUDE_EVENODD=1 515 # options RF_INCLUDE_RAID5_RS=1 516 # options RF_INCLUDE_PARITYLOGGING=1 517 # options RF_INCLUDE_CHAINDECLUSTER=1 518 # options RF_INCLUDE_INTERDECLUSTER=1 519 # options RF_INCLUDE_PARITY_DECLUSTERING=1 520 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 521 522 pseudo-device rnd # /dev/random and in-kernel generator 523 #options RND_COM # use "com" randomness as well (BROKEN) 524 525 config netbsd root on ? type ? 526
Indexes created Thu Oct 02 14:10:14 GMT 2025