GENERIC revision 1.174
1# $NetBSD: GENERIC,v 1.174 2002/02/13 12:08:57 is Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# 22#if 0 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make INSTALL extracts the INSTALL configuration file. 30# 31# commit them, too. 32#endif 33# 34 35include "arch/amiga/conf/std.amiga" 36 37#ident "GENERIC-$Revision: 1.174 $" 38 39#ifdef INSTALL_CONFIGURATION 40makeoptions COPTS="-Os" 41#endif 42 43maxusers 8 44options RTC_OFFSET=0 45 46# 47# mainboards to support (in addition to Amiga) 48# 49#ifdef DRACO_CONFIGURATION 50options DRACO 51 52#endif 53#ifdef AMIGA_CONFIGURATION 54options BB060STUPIDROM # You need this, if you have a non-DraCo 55 # MC68060 with an OS ROM up to (at least) 56 # V40 (OS3.1) and want to boot with the 57 # bootblock. 58 # You do not need this if you have a DraCo, 59 # have no 68060 or NEVER use the bootblock 60options P5PPC68KBOARD # Phase5 PPC/68K board support 61#endif 62# 63# processors this kernel should support 64# 65options M68060 # support for 060 66options M060SP # MC68060 software support (Required for 060) 67#ifdef AMIGA_CONFIGURATION 68options M68040 # support for 040 69options FPSP # MC68040 floating point support 70options M68030 # support for 030 71options M68020 # support for 020/851 72options FPU_EMULATE # FPU emulation 73#endif 74 75# 76# Networking options 77# 78options INET # IP networking support (Required) 79options INET6 # IPV6 80#options IPSEC # IP security 81#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 82#options IPSEC_DEBUG # debug for IP security 83#options GATEWAY # Packet forwarding 84#options DIRECTED_BROADCAST # Broadcast across subnets 85 86#ifndef INSTALL_CONFIGURATION 87#options MROUTING # Multicast routing 88options NS # XNS 89#options NSIP # XNS tunneling over IP 90options ISO,TPIP # OSI 91#options EON # OSI tunneling over IP 92options CCITT,LLC,HDLC # X.25 93options NETATALK # AppleTalk networking protocols 94#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 95#endif 96 97options PPP_BSDCOMP # BSD-Compress compression support for PPP 98options PPP_DEFLATE # Deflate compression support for PPP 99options PPP_FILTER # Active filter support for PPP (requires bpf) 100options PFIL_HOOKS # pfil(9) packet filter hooks 101options IPFILTER_LOG # ipmon(8) log support 102 103# Filesystems 104file-system FFS # Berkeley fast file system 105file-system EXT2FS # second extended file system (linux) 106#file-system LFS # log-structured filesystem (experimental) 107 108#ifndef INSTALL_CONFIGURATION 109file-system MFS # Memory based filesystem 110#endif 111 112file-system NFS # Network File System client side code 113file-system ADOSFS # AmigaDOS file system 114file-system CD9660 # ISO 9660 + Rock Ridge filesystem 115file-system MSDOSFS # MS-DOS filesystem 116 117file-system KERNFS # kernel data-structure filesystem 118 119#ifndef INSTALL_CONFIGURATION 120file-system FDESC # user file descriptor filesystem 121file-system NULLFS # loopback filesystem 122file-system OVERLAY # overlay filesystem 123#file-system PORTAL # Portal filesystem 124file-system PROCFS # /proc filesystem 125file-system UMAPFS # NULLFS + uid and gid remapping 126file-system UNION # union filesystem 127#endif 128 129# Filesystem options 130 131#options FFS_EI # FFS Endian Independant support 132 133#ifndef INSTALL_CONFIGURATION 134options QUOTA # User and group quotas in FFS 135options SOFTDEP # FFS soft updates support. 136options NFSSERVER # Network File System server side code 137#endif 138 139#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 140 # immutable) behave as system flags. 141 142# 143# Compatibility options for various existing systems 144# 145 146#ifndef INSTALL_CONFIGURATION 147#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 148options COMPAT_43 # compatibility with 4.3BSD interfaces 149options COMPAT_09 # compatibility with NetBSD 0.9 150options COMPAT_10 # compatibility with NetBSD 1.0 151options COMPAT_12 # compatibility with NetBSD 1.2 152options COMPAT_13 # compatibility with NetBSD 1.3 153options COMPAT_14 # compatibility with NetBSD 1.4 154options COMPAT_SUNOS # Support to run Sun (m68k) executables 155options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 156options COMPAT_NOMID # allow nonvalid machine id executables 157#options COMPAT_LINUX # Support to run Linux/m68k executables 158#endif 159 160options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 161 162#ifndef INSTALL_CONFIGURATION 163# 164# Support for System V IPC facilities. 165# 166options SYSVSHM # System V-like shared memory 167options SYSVMSG # System V-like messages 168options SYSVSEM # System V-like semaphores 169#options SEMMNI=10 # number of semaphore identifiers 170#options SEMMNS=60 # number of semaphores in system 171#options SEMUME=10 # max number of undo entries per process 172#options SEMMNU=30 # number of undo structures in system 173#endif 174 175# 176# Support for various kernel options 177# 178 179#ifndef INSTALL_CONFIGURATION 180options KTRACE # system call tracing support 181options LKM # Loadable kernel modules 182options UCONSOLE # anyone can redirect a virtual console 183#endif 184#options INSECURE # disable kernel security levels 185options SCSIVERBOSE # human readable SCSI error messages 186#ifndef INSTALL_CONFIGURATION 187options NTP # NTP phase/frequency locked loop 188#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 189#else 190options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 191#endif 192 193# 194# Misc. debugging options 195# 196options DDB # Kernel debugger 197#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 198options DIAGNOSTIC # Extra kernel sanity checks 199#options DEBUG # Enable misc. kernel debugging code 200#options SYSCALL_DEBUG # debug all syscalls. 201#options SCSIDEBUG # Add SCSI debugging statements 202#options PANICBUTTON # Forced crash via keypress (???) 203 204# 205# Amiga specific options 206# 207#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 208 # first bank of RAM. (default: unlimited) 209#options NKPTADD=4 # set this for 4 additional KPT pages 210#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 211 # per 16 MB (1<<24 bytes) of RAM 212 # uncomment and decrease this, or uncomment and 213 # increase NKPTADD if you get "out of PT pages" 214 # panics. 215 216# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 217# before the 10 secondinterval ends, or that KBDRESET does work at all. 218#options KBDRESET # sync on Ctrl-Amiga-Amiga 219 220# These options improve performance with the built-in serial port 221# on slower Amigas. Try the larger buffers first then lev6_defer. 222#options SERIBUF_SIZE=4096 223#options SEROBUF_SIZE=32 224#options LEV6_DEFER # defers l6 to l4 (below serial l5) 225 226options RETINACONSOLE # enable code to allow retina to be console 227#ifdef AMIGA_CONFIGURATION 228options ULOWELLCONSOLE # enable code to allow a2410 to be console 229options CL5426CONSOLE # Cirrus console 230options CV64CONSOLE # CyberVision console 231options TSENGCONSOLE # Tseng console 232options CV3DCONSOLE # CyberVision 64/3D console 233#endif 234 235#ifdef AMIGA_CONFIGURATION 236options GRF_ECS # Enhanced Chip Set 237options GRF_NTSC # NTSC 238options GRF_PAL # PAL 239options GRF_A2024 # Support for the A2024 240options GRF_AGA # AGA Chip Set 241options GRF_AGA_VGA # AGA VGAONLY timing 242options GRF_SUPER72 # AGA Super-72 243#endif 244#options KFONT_8X11 # 8x11 font 245 246# This is how you would tell the kernel the A2410 oscillator frequencies: 247# The used frequencies are the defaults, and do not need option setting 248#options ULOWELL_OSC1=36000000 249#options ULOWELL_OSC2=66667000 250 251# This is how you specify the blitting speed, higher values may speed up blits 252# a littel bit. If you raise this value too much some trash may appear. 253# the commented version is the default. 254#options RH_MEMCLK=61000000 255# this option enables the 64 bit sprite which does not work 256# for quite a few people. E.g. The cursor sprite will turn to a block 257# when moved to the top of the screen in X. 258#options RH_64BIT_SPRITE 259# enables fast scroll code appears to now work on 040 systems. 260#options RETINA_SPEED_HACK 261# enables the Hardwarecursor which does not work on some systems. 262#options RH_HARDWARECURSOR 263 264#ifdef AMIGA_CONFIGURATION 265# wscons aware interface to amiga custom chips. 266# If you enable it enable also wskbd. 267# 268#amidisplaycc0 at mainbus0 # wscons interface to custom chips 269#wsdisplay0 at amidisplaycc0 console ? 270#options WSEMUL_VT100 271#options FONT_BOLD8x16 272#options FONT_VT220L8x10 273#endif 274 275#ifdef AMIGA_CONFIGURATION 276grfcc0 at mainbus0 # custom chips 277grfrt0 at zbus0 # retina II 278#endif 279grfrh0 at zbus0 # retina III 280#ifdef AMIGA_CONFIGURATION 281grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 282grful0 at zbus0 # A2410 283grfcv0 at zbus0 # CyberVision 64 284grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 285grfcv3d0 at zbus0 # CyberVision 64/3D 286#endif 287 288#ifdef AMIGA_CONFIGURATION 289grf0 at grfcc0 290grf1 at grfrt0 291#endif 292grf2 at grfrh0 293#ifdef AMIGA_CONFIGURATION 294grf3 at grfcl? 295grf4 at grful0 296grf5 at grfcv0 297grf6 at grfet? 298grf7 at grfcv3d0 299#endif 300#ifdef AMIGA_CONFIGURATION 301ite0 at grf0 # terminal emulators for grfs 302ite1 at grf1 # terminal emulators for grfs 303#endif 304ite2 at grf2 # terminal emulators for grfs 305#ifdef AMIGA_CONFIGURATION 306ite3 at grf3 # terminal emulators for grfs 307ite4 at grf4 # terminal emulators for grfs 308ite5 at grf5 # terminal emulators for grfs 309ite6 at grf6 # terminal emulators for grfs 310ite7 at grf7 # terminal emulators for grfs 311#endif 312 313msc0 at zbus0 # A2232 MSC multiport serial. 314mfc0 at zbus0 # MultiFaceCard I/O board 315mfcs0 at mfc0 unit 0 # MFC serial 316mfcs1 at mfc0 unit 1 # MFC serial 317#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 318#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 319#mfcs2 at mfc1 unit 0 320#mfcs3 at mfc1 unit 1 321#mfcp1 at mfc1 unit 0 322 323hyper* at zbus? # zbus HyperCom3/3+/4/4+ 324#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 325com* at hyper? port ? # Hypercom3/4 serial ports 326lpt* at hyper? port ? # Hypercom3+/4+ parallel port 327 328#options IOBZCLOCK=22118400 # default, uncomment the next line 329#options IOBZCLOCK=24000000 # if needed. 330 331iobl* at zbus? # zbus IOBlix 332com* at iobl? port ? # IOBlix serial ports 333lpt* at iobl? port ? # IOBlix parallel ports 334 335 336# 337# Keyboard device. Optionally can attach a wskbd. 338# wskbd works together with a wsdisplay so enable them both if you will. 339# Don't enable wskbd if you use ite. 340# 341# XXX in std.amiga: kbd0 at mainbus0 342#wskbd0 at kbd0 console ? 343 344 345#ifdef AMIGA_CONFIGURATION 346# 347# Amiga Mainboard devices (sans graphics and keyboard) 348# 349 350ser0 at mainbus0 # Amiga onboard serial 351par0 at mainbus0 # Amiga onboard parallel 352ms* at mainbus0 # Amiga mice 353fdc0 at mainbus0 # Amiga FDC 354fd* at fdc0 unit ? # floppy disks on the later 355a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 356a2kbbc0 at mainbus0 # A2000 battery backed clock 357#ifndef INSTALL_CONFIGURATION 358aucc* at mainbus0 # Amiga CC audio 359audio* at aucc? 360#endif 361#endif 362 363#ifdef DRACO_CONFIGURATION 364# 365# DraCo Mainboard devices (sans keyboard) 366# 367 368drbbc0 at mainbus0 # DraCo battery backed clock 369drsupio0 at mainbus0 # DraCo superio chip 370com* at drsupio? port ? # DraCo serial 371lpt0 at drsupio? port ? # DraCo parallel 372#endif 373 374# 375# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 376# 377 378#ifndef INSTALL_CONFIGURATION 379#ifndef DRACO_CONFIGURATION 380# Alas, Melody-Z2 dont configure in the DraCo bus. 381melody* at zbus0 # Melody MPEG audio decoder 382audio* at melody? 383#endif 384 385repulse* at zbus0 # ALiENDESiGN Repulse 386audio* at repulse? 387 388toccata* at zbus0 # MacroSystem GmbH Toccata 389audio* at toccata? 390#endif 391 392# Ethernet cards: 393le* at zbus0 # A2065, Ameristar, Ariadne 394ne* at zbus0 # AriadneII, X-surf 395ed* at zbus0 # Hydra, ASDG LanRover 396es* at zbus0 # CEI A4066 EthernetPLUS 397qn* at zbus0 # Quicknet 398 399# Arcnet 400bah* at zbus0 # C=/Ameristar A2060 / 560 401 402#ifdef AMIGA_CONFIGURATION 403# Greater Valley Product Bus 404gvpbus* at zbus0 405 406# scsi stuff, all possible 407gtsc0 at gvpbus? # GVP series II scsi 408scsibus* at gtsc0 409ahsc0 at mainbus0 # A3000 scsi 410scsibus* at ahsc0 411atzsc0 at zbus0 # A2091 scsi 412scsibus* at atzsc0 413wstsc0 at zbus0 # Wordsync II scsi 414scsibus* at wstsc0 415ivsc0 at zbus0 # IVS scsi 416scsibus* at ivsc0 417mlhsc0 at zbus0 # Hacker scsi 418scsibus* at mlhsc0 419otgsc0 at zbus0 # 12 gauge scsi 420scsibus* at otgsc0 421zssc0 at zbus0 # Zeus scsi 422scsibus* at zssc0 423mgnsc0 at zbus0 # Magnum scsi 424scsibus* at mgnsc0 425wesc0 at zbus0 # Warp Engine scsi 426scsibus* at wesc0 427afsc0 at zbus0 # A4091 scsi 428scsibus* at afsc0 429aftsc0 at mainbus0 # A4000T scsi 430scsibus* at aftsc0 431flsc0 at zbus0 # FastlaneZ3 scsi 432scsibus* at flsc0 433bzsc0 at zbus0 # Blizzard 1230 I,II scsi 434scsibus* at bzsc0 435bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 436scsibus* at bzivsc0 437bztzsc0 at zbus0 # Blizzard 2060 scsi 438scsibus* at bztzsc0 439cbsc0 at zbus0 # CyberSCSI I 440scsibus* at cbsc0 441cbiisc0 at zbus0 # CyberSCSI II 442scsibus* at cbiisc0 443cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 444scsibus* at cbiiisc0 445empsc0 at zbus0 # Emplant scsi 446scsibus* at empsc0 447#idesc0 at mainbus0 # A4000 & A1200 IDE 448#scsibus* at idesc0 449 450# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 451# <<< are uncommented >>> 452wdc0 at mainbus0 # A4000 & A1200 IDE bus 453wd* at wdc? drive ? # + drives 454atapibus* at wdc? channel ? # ATAPI bus 455cd* at atapibus? drive ? # ATAPI CD-ROM drives 456sd* at atapibus? drive ? # ATAPI disk drives 457 458pccard0 at mainbus0 459pcmcia* at pccard0 460com* at pcmcia? function ? # Modems and serial cards 461pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 462aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 463wdc* at pcmcia? function ? 464awi* at pcmcia? function ? # BayStack 650 (802.11FH) 465ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 466mbe* at pcmcia? function ? # MB8696x based Ethernet 467ne* at pcmcia? function ? # NE2000-compatible Ethernet 468sm* at pcmcia? function ? # Megahertz Ethernet 469mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 470com* at mhzc? 471sm* at mhzc? 472 473#endif 474 475#ifdef DRACO_CONFIGURATION 476drsc0 at mainbus0 # DraCo scsi 477scsibus* at drsc0 478#endif 479 480 481# each hard drive from low target to high 482# will configure to the next available sd unit number 483sd* at scsibus? target ? lun ? # scsi disks 484st* at scsibus? target ? lun ? # scsi tapes 485cd* at scsibus? target ? lun ? # scsi cds 486ch* at scsibus? target ? lun ? # scsi autochangers 487#ifndef INSTALL_CONFIGURATION 488ss* at scsibus? target ? lun ? # scsi scanner 489uk* at scsibus? target ? lun ? # scsi unknown 490#endif 491 492pseudo-device loop # loopback network interface 493pseudo-device sl 1 # SLIP network interfaces 494pseudo-device ppp 1 # PPP network interfaces 495pseudo-device pppoe # PPP over Ethernet (RFC 2516) 496pseudo-device tun 1 # network tunnel line discipline 497#pseudo-device gre 2 # generic L3 over IP tunnel 498#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 499pseudo-device bpfilter 16 # Berkeley packet filter 500pseudo-device ipfilter # IP Filter package 501pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 502#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 503#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 504pseudo-device vlan # IEEE 802.1q encapsulation 505pseudo-device bridge # simple inter-network bridging 506 507pseudo-device view 4 # views (needed for grfcc) 508pseudo-device pty # pseudo-terminals 509 510pseudo-device vnd 4 # vnode pseudo-disks 511pseudo-device ccd 4 # concatenated disk devices 512pseudo-device raid 8 # RAIDframe disk driver 513options RAID_AUTOCONFIG # auto-configuration of RAID components 514# Options to enable various other RAIDframe RAID types. 515# options RF_INCLUDE_EVENODD=1 516# options RF_INCLUDE_RAID5_RS=1 517# options RF_INCLUDE_PARITYLOGGING=1 518# options RF_INCLUDE_CHAINDECLUSTER=1 519# options RF_INCLUDE_INTERDECLUSTER=1 520# options RF_INCLUDE_PARITY_DECLUSTERING=1 521# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 522 523pseudo-device rnd # /dev/random and in-kernel generator 524#options RND_COM # use "com" randomness as well (BROKEN) 525 526config netbsd root on ? type ? 527