Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.180
      1 # $NetBSD: GENERIC,v 1.180 2002/05/30 19:45:15 thorpej Exp $
      2 #
      3 # GENERIC machine description file
      4 #
      5 # This machine description file is used to generate the default NetBSD
      6 # kernel.  The generic kernel does not include all options, subsystems
      7 # and device drivers, but should be useful for most applications.
      8 #
      9 # The machine description file can be customised for your specific
     10 # machine to reduce the kernel size and improve its performance.
     11 #
     12 # For further information on compiling NetBSD kernels, see the config(8)
     13 # man page.
     14 #
     15 # For further information on hardware support for this architecture, see
     16 # the intro(4) man page.  For further information about kernel options
     17 # for this architecture, see the options(4) man page.  For an explanation
     18 # of each device driver in this file see the section 4 man page for the
     19 # device.
     20 
     21 #
     22 #if 0
     23 # GENERIC Amiga or DraCo
     24 #
     25 # This configuration file contains all possible options
     26 #
     27 # make AMIGA extracts the AMIGA configuration file.
     28 # make DRACO extracts the DRACO configuration file.
     29 # make INSTALL extracts the INSTALL configuration file.
     30 #
     31 # commit them, too.
     32 #endif
     33 #
     34 
     35 include "arch/amiga/conf/std.amiga"
     36 
     37 options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     38 
     39 #ident 		"GENERIC-$Revision: 1.180 $"
     40 
     41 #ifdef INSTALL_CONFIGURATION
     42 makeoptions	COPTS="-Os"
     43 #endif
     44 
     45 maxusers	8
     46 options 	RTC_OFFSET=0
     47 
     48 #
     49 # mainboards to support (in addition to Amiga)
     50 #
     51 #ifdef DRACO_CONFIGURATION
     52 options 	DRACO
     53 
     54 #endif
     55 #ifdef AMIGA_CONFIGURATION
     56 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     57 				# MC68060 with an OS ROM up to (at least)
     58 				# V40 (OS3.1) and want to boot with the
     59 				# bootblock.
     60 				# You do not need this if you have a DraCo,
     61 				# have no 68060 or NEVER use the bootblock
     62 options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
     63 #endif
     64 #
     65 # processors this kernel should support
     66 #
     67 options 	M68060		# support for 060
     68 options 	M060SP		# MC68060 software support (Required for 060)
     69 #ifdef AMIGA_CONFIGURATION
     70 options 	M68040		# support for 040
     71 options 	FPSP		# MC68040 floating point support
     72 options 	M68030		# support for 030
     73 options 	M68020		# support for 020/851
     74 options 	FPU_EMULATE	# FPU emulation
     75 #endif
     76 
     77 #
     78 # Networking options
     79 #
     80 options 	INET		# IP networking support (Required)
     81 options 	INET6		# IPV6
     82 #options 	IPSEC		# IP security
     83 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     84 #options 	IPSEC_DEBUG	# debug for IP security
     85 #options 	GATEWAY		# Packet forwarding
     86 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     87 
     88 #ifndef INSTALL_CONFIGURATION
     89 #options 	MROUTING	# Multicast routing
     90 options 	NS		# XNS
     91 #options 	NSIP		# XNS tunneling over IP
     92 options 	ISO,TPIP	# OSI
     93 #options 	EON		# OSI tunneling over IP
     94 options 	CCITT,LLC,HDLC	# X.25
     95 options 	NETATALK	# AppleTalk networking protocols
     96 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
     97 #endif
     98 
     99 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
    100 options 	PPP_DEFLATE	# Deflate compression support for PPP
    101 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
    102 options 	PFIL_HOOKS	# pfil(9) packet filter hooks
    103 options 	IPFILTER_LOG	# ipmon(8) log support
    104 
    105 # Filesystems
    106 file-system 	FFS		# Berkeley fast file system
    107 file-system 	EXT2FS		# second extended file system (linux)
    108 #file-system 	LFS		# log-structured filesystem (experimental)
    109 
    110 #ifndef INSTALL_CONFIGURATION
    111 file-system 	MFS		# Memory based filesystem
    112 #endif
    113 
    114 file-system 	NFS		# Network File System client side code
    115 file-system 	ADOSFS		# AmigaDOS file system
    116 file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
    117 file-system 	MSDOSFS		# MS-DOS filesystem
    118 
    119 file-system 	KERNFS		# kernel data-structure filesystem
    120 
    121 #ifndef INSTALL_CONFIGURATION
    122 file-system 	FDESC		# user file descriptor filesystem
    123 file-system 	NULLFS		# loopback filesystem
    124 file-system 	OVERLAY		# overlay filesystem
    125 #file-system 	PORTAL		# Portal filesystem
    126 file-system 	PROCFS		# /proc filesystem
    127 file-system 	UMAPFS		# NULLFS + uid and gid remapping
    128 file-system 	UNION		# union filesystem
    129 #endif
    130 
    131 # Filesystem options
    132 
    133 #options 	FFS_EI		# FFS Endian Independant support
    134 
    135 #ifndef INSTALL_CONFIGURATION
    136 options 	QUOTA		# User and group quotas in FFS
    137 options 	SOFTDEP		# FFS soft updates support.
    138 options 	NFSSERVER	# Network File System server side code
    139 #endif
    140 
    141 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    142 				# immutable) behave as system flags.
    143 
    144 #
    145 # Compatibility options for various existing systems
    146 #
    147 
    148 #ifndef INSTALL_CONFIGURATION
    149 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
    150 options 	COMPAT_43	# compatibility with 4.3BSD interfaces
    151 options 	COMPAT_09	# compatibility with NetBSD 0.9
    152 options 	COMPAT_10	# compatibility with NetBSD 1.0
    153 options 	COMPAT_12	# compatibility with NetBSD 1.2
    154 options 	COMPAT_13	# compatibility with NetBSD 1.3
    155 options 	COMPAT_14	# compatibility with NetBSD 1.4
    156 options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
    157 options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
    158 options 	COMPAT_NOMID	# allow nonvalid machine id executables
    159 #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
    160 #endif
    161 
    162 options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
    163 options 	COMPAT_AOUT_M68K # actually make some system calls work.
    164 
    165 #ifndef INSTALL_CONFIGURATION
    166 #
    167 # Support for System V IPC facilities.
    168 #
    169 options 	SYSVSHM		# System V-like shared memory
    170 options 	SYSVMSG		# System V-like messages
    171 options 	SYSVSEM		# System V-like semaphores
    172 #options 	SEMMNI=10	# number of semaphore identifiers
    173 #options 	SEMMNS=60	# number of semaphores in system
    174 #options 	SEMUME=10	# max number of undo entries per process
    175 #options 	SEMMNU=30	# number of undo structures in system
    176 #endif
    177 
    178 #
    179 # Support for various kernel options
    180 #
    181 
    182 #ifndef INSTALL_CONFIGURATION
    183 options 	KTRACE		# system call tracing support
    184 options 	LKM		# Loadable kernel modules
    185 options 	UCONSOLE	# anyone can redirect a virtual console
    186 #endif
    187 #options 	INSECURE	# disable kernel security levels
    188 options 	SCSIVERBOSE	# human readable SCSI error messages
    189 #options 	USERCONF	# userconf(4) support
    190 #ifndef INSTALL_CONFIGURATION
    191 options 	NTP		# NTP phase/frequency locked loop
    192 #options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
    193 #else
    194 options		PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
    195 #endif
    196 
    197 #
    198 # Misc. debugging options
    199 #
    200 options 	DDB		# Kernel debugger
    201 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    202 options 	DIAGNOSTIC	# Extra kernel sanity checks
    203 #options 	DEBUG		# Enable misc. kernel debugging code
    204 #options 	SYSCALL_DEBUG	# debug all syscalls.
    205 #options 	SCSIDEBUG	# Add SCSI debugging statements
    206 #options 	PANICBUTTON	# Forced crash via keypress (?)
    207 
    208 #
    209 # Amiga specific options
    210 #
    211 #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    212 				# first bank of RAM. (default: unlimited)
    213 #options 	NKPTADD=4	# set this for 4 additional KPT pages
    214 #options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    215 				# per 16 MB (1<<24 bytes) of RAM
    216 				# uncomment and decrease this, or uncomment and
    217 				# increase NKPTADD if you get "out of PT pages"
    218 				# panics.
    219 
    220 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    221 # before the 10 secondinterval ends, or that KBDRESET does work at all.
    222 #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    223 
    224 # These options improve performance with the built-in serial port
    225 # on slower Amigas.  Try the larger buffers first then lev6_defer.
    226 #options 	SERIBUF_SIZE=4096
    227 #options 	SEROBUF_SIZE=32
    228 #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    229 
    230 options 	RETINACONSOLE	# enable code to allow retina to be console
    231 #ifdef AMIGA_CONFIGURATION
    232 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    233 options 	CL5426CONSOLE	# Cirrus console
    234 options 	CV64CONSOLE	# CyberVision console
    235 options 	TSENGCONSOLE	# Tseng console
    236 options 	CV3DCONSOLE	# CyberVision 64/3D console
    237 #endif
    238 
    239 #ifdef AMIGA_CONFIGURATION
    240 options 	GRF_ECS		# Enhanced Chip Set
    241 options 	GRF_NTSC	# NTSC
    242 options 	GRF_PAL		# PAL
    243 options 	GRF_A2024	# Support for the A2024
    244 options 	GRF_AGA		# AGA Chip Set
    245 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    246 options 	GRF_SUPER72	# AGA Super-72
    247 #endif
    248 #options 	KFONT_8X11	# 8x11 font
    249 
    250 # select a font for the console according to the character set and keymap
    251 # you want to use
    252 options        KFONT_CONS_ISO8859_1
    253 #options         KFONT_CONS_ISO8859_2
    254 
    255 # This is how you would tell the kernel the A2410 oscillator frequencies:
    256 # The used frequencies are the defaults, and do not need option setting
    257 #options 	ULOWELL_OSC1=36000000
    258 #options 	ULOWELL_OSC2=66667000
    259 
    260 # This is how you specify the blitting speed, higher values may speed up blits
    261 # a littel bit.  If you raise this value too much some trash may appear.
    262 # the commented version is the default.
    263 #options 	RH_MEMCLK=61000000
    264 # this option enables the 64 bit sprite which does not work
    265 # for quite a few people.  E.g. The cursor sprite will turn to a block
    266 # when moved to the top of the screen in X.
    267 #options 	RH_64BIT_SPRITE
    268 # enables fast scroll code appears to now work on 040 systems.
    269 #options 	RETINA_SPEED_HACK
    270 # enables the Hardwarecursor which does not work on some systems.
    271 #options 	RH_HARDWARECURSOR
    272 
    273 #ifdef AMIGA_CONFIGURATION
    274 # wscons aware interface to amiga custom chips.
    275 # If you enable it enable also wskbd.
    276 #
    277 #amidisplaycc0	at mainbus0		# wscons interface to custom chips
    278 #wsdisplay0	at amidisplaycc0 console ?
    279 #options	WSEMUL_VT100
    280 #options	FONT_BOLD8x16
    281 #options	FONT_VT220L8x10
    282 #endif
    283 
    284 #ifdef AMIGA_CONFIGURATION
    285 grfcc0		at mainbus0		# custom chips
    286 grfrt0		at zbus0		# retina II
    287 #endif
    288 grfrh0		at zbus0		# retina III
    289 #ifdef AMIGA_CONFIGURATION
    290 grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
    291 grful0		at zbus0		# A2410
    292 grfcv0		at zbus0		# CyberVision 64
    293 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    294 grfcv3d0	at zbus0		# CyberVision 64/3D
    295 #endif
    296 
    297 #ifdef AMIGA_CONFIGURATION
    298 grf0		at grfcc0
    299 grf1		at grfrt0
    300 #endif
    301 grf2		at grfrh0
    302 #ifdef AMIGA_CONFIGURATION
    303 grf3		at grfcl?
    304 grf4		at grful0
    305 grf5		at grfcv0
    306 grf6		at grfet?
    307 grf7		at grfcv3d0
    308 #endif
    309 #ifdef AMIGA_CONFIGURATION
    310 ite0		at grf0			# terminal emulators for grfs
    311 ite1		at grf1			# terminal emulators for grfs
    312 #endif
    313 ite2		at grf2			# terminal emulators for grfs
    314 #ifdef AMIGA_CONFIGURATION
    315 ite3		at grf3			# terminal emulators for grfs
    316 ite4		at grf4			# terminal emulators for grfs
    317 ite5		at grf5			# terminal emulators for grfs
    318 ite6		at grf6			# terminal emulators for grfs
    319 ite7		at grf7			# terminal emulators for grfs
    320 #endif
    321 
    322 msc0		at zbus0		# A2232 MSC multiport serial.
    323 mfc0		at zbus0		# MultiFaceCard I/O board
    324 mfcs0		at mfc0 unit 0		# MFC serial
    325 mfcs1		at mfc0 unit 1		# MFC serial
    326 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    327 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    328 #mfcs2		at mfc1 unit 0
    329 #mfcs3		at mfc1 unit 1
    330 #mfcp1		at mfc1 unit 0
    331 
    332 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    333 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    334 com*		at hyper? port ?	# Hypercom3/4 serial ports
    335 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    336 
    337 #options 	IOBZCLOCK=22118400 	# default, uncomment the next line
    338 #options 	IOBZCLOCK=24000000	# if needed.
    339 
    340 iobl*		at zbus?		# zbus IOBlix
    341 com*		at iobl? port ?		# IOBlix serial ports
    342 lpt*		at iobl? port ?		# IOBlix parallel ports
    343 
    344 
    345 #
    346 # Keyboard device. Optionally can attach a wskbd.
    347 # wskbd works together with a wsdisplay so enable them both if you will.
    348 # Don't enable wskbd if you use ite.
    349 #
    350 # XXX in std.amiga: kbd0 at mainbus0
    351 #wskbd0		at kbd0 console ?
    352 
    353 
    354 #ifdef AMIGA_CONFIGURATION
    355 #
    356 # Amiga Mainboard devices (sans graphics and keyboard)
    357 #
    358 
    359 ser0		at mainbus0		# Amiga onboard serial
    360 par0		at mainbus0		# Amiga onboard parallel
    361 ms*		at mainbus0		# Amiga mice
    362 fdc0		at mainbus0		# Amiga FDC
    363 fd*		at fdc0 unit ?		# floppy disks on the later
    364 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    365 a2kbbc0 	at mainbus0		# A2000 battery backed clock
    366 #ifndef INSTALL_CONFIGURATION
    367 aucc*		at mainbus0		# Amiga CC audio
    368 audio*		at aucc?
    369 #endif
    370 #endif
    371 
    372 #ifdef DRACO_CONFIGURATION
    373 #
    374 # DraCo Mainboard devices (sans keyboard)
    375 #
    376 
    377 drbbc0		at mainbus0		# DraCo battery backed clock
    378 drsupio0	at mainbus0		# DraCo superio chip
    379 com*		at drsupio? port ?	# DraCo serial
    380 lpt0		at drsupio? port ?	# DraCo parallel
    381 #endif
    382 
    383 #
    384 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    385 #
    386 
    387 #ifndef INSTALL_CONFIGURATION
    388 #ifndef DRACO_CONFIGURATION
    389 # Alas, Melody-Z2 dont configure in the DraCo bus.
    390 melody* 	at zbus0		# Melody MPEG audio decoder
    391 audio*		at melody?
    392 #endif
    393 
    394 repulse*	at zbus0		# ALiENDESiGN Repulse
    395 audio*		at repulse?
    396 
    397 toccata*	at zbus0		# MacroSystem GmbH Toccata
    398 audio*		at toccata?
    399 #endif
    400 
    401 # Ethernet cards:
    402 le*		at zbus0		# A2065, Ameristar, Ariadne
    403 ne*		at zbus0		# AriadneII, X-surf
    404 ed*		at zbus0		# Hydra, ASDG LanRover
    405 es*		at zbus0		# CEI A4066 EthernetPLUS
    406 qn*		at zbus0		# Quicknet
    407 
    408 # Arcnet
    409 bah*		at zbus0		# C=/Ameristar A2060 / 560
    410 
    411 #ifdef AMIGA_CONFIGURATION
    412 # Greater Valley Product Bus
    413 gvpbus* 	at zbus0
    414 
    415 # scsi stuff, all possible
    416 gtsc0		at gvpbus?		# GVP series II scsi
    417 scsibus*	at gtsc0
    418 ahsc0		at mainbus0		# A3000 scsi
    419 scsibus*	at ahsc0
    420 atzsc0		at zbus0		# A2091 scsi
    421 scsibus*	at atzsc0
    422 wstsc0		at zbus0		# Wordsync II scsi
    423 scsibus*	at wstsc0
    424 ivsc0		at zbus0		# IVS scsi
    425 scsibus*	at ivsc0
    426 mlhsc0		at zbus0		# Hacker scsi
    427 scsibus*	at mlhsc0
    428 otgsc0		at zbus0		# 12 gauge scsi
    429 scsibus*	at otgsc0
    430 zssc0		at zbus0		# Zeus scsi
    431 scsibus*	at zssc0
    432 mgnsc0		at zbus0		# Magnum scsi
    433 scsibus*	at mgnsc0
    434 wesc0		at zbus0		# Warp Engine scsi
    435 scsibus*	at wesc0
    436 afsc0		at zbus0		# A4091 scsi
    437 scsibus*	at afsc0
    438 aftsc0		at mainbus0		# A4000T scsi
    439 scsibus*	at aftsc0
    440 flsc0		at zbus0		# FastlaneZ3 scsi
    441 scsibus*	at flsc0
    442 bzsc0		at zbus0		# Blizzard 1230 I,II scsi
    443 scsibus*	at bzsc0
    444 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
    445 scsibus*	at bzivsc0
    446 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    447 scsibus*	at bztzsc0
    448 cbsc0		at zbus0		# CyberSCSI I
    449 scsibus*	at cbsc0
    450 cbiisc0 	at zbus0		# CyberSCSI II
    451 scsibus*	at cbiisc0
    452 cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    453 scsibus*	at cbiiisc0
    454 empsc0		at zbus0		# Emplant scsi
    455 scsibus*	at empsc0
    456 #idesc0		at mainbus0		# A4000 & A1200 IDE
    457 #scsibus*	at idesc0
    458 
    459 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
    460 # <<< are uncommented >>>
    461 wdc0		at mainbus0		# A4000 & A1200 IDE bus
    462 wd*		at wdc? drive ?		#  + drives
    463 atapibus*	at wdc? channel ?	# ATAPI bus
    464 cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    465 sd*		at atapibus? drive ?	# ATAPI disk drives
    466 
    467 pccard0		at mainbus0
    468 pcmcia*		at pccard0
    469 com*		at pcmcia? function ?		# Modems and serial cards
    470 pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
    471 aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
    472 wdc*		at pcmcia? function ?
    473 awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
    474 ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    475 mbe*		at pcmcia? function ?		# MB8696x based Ethernet
    476 ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
    477 sm*		at pcmcia? function ?		# Megahertz Ethernet
    478 mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
    479 com*		at mhzc?
    480 sm*		at mhzc?
    481 
    482 #endif
    483 
    484 #ifdef DRACO_CONFIGURATION
    485 drsc0		at mainbus0		# DraCo scsi
    486 scsibus*	at drsc0
    487 #endif
    488 
    489 
    490 # each hard drive from low target to high
    491 # will configure to the next available sd unit number
    492 sd*	at scsibus? target ? lun ?	# scsi disks
    493 st*	at scsibus? target ? lun ?	# scsi tapes
    494 cd*	at scsibus? target ? lun ?	# scsi cds
    495 ch*	at scsibus? target ? lun ?	# scsi autochangers
    496 #ifndef INSTALL_CONFIGURATION
    497 ss*	at scsibus? target ? lun ?	# scsi scanner
    498 uk*	at scsibus? target ? lun ?	# scsi unknown
    499 #endif
    500 
    501 pseudo-device	loop			# loopback network interface
    502 pseudo-device	sl		1	# SLIP network interfaces
    503 pseudo-device	ppp		1	# PPP network interfaces
    504 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    505 pseudo-device	tun		1	# network tunnel line discipline
    506 #pseudo-device	gre		2	# generic L3 over IP tunnel
    507 pseudo-device	bpfilter	16	# Berkeley packet filter
    508 pseudo-device	ipfilter		# IP Filter package
    509 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    510 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    511 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    512 pseudo-device	vlan			# IEEE 802.1q encapsulation
    513 pseudo-device	bridge			# simple inter-network bridging
    514 
    515 pseudo-device	view		4	# views (needed for grfcc)
    516 pseudo-device	pty			# pseudo-terminals
    517 
    518 pseudo-device	vnd		4	# vnode pseudo-disks
    519 pseudo-device	ccd		4	# concatenated disk devices
    520 pseudo-device	raid		8	# RAIDframe disk driver
    521 options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    522 # Options to enable various other RAIDframe RAID types.
    523 # options	RF_INCLUDE_EVENODD=1
    524 # options	RF_INCLUDE_RAID5_RS=1
    525 # options	RF_INCLUDE_PARITYLOGGING=1
    526 # options	RF_INCLUDE_CHAINDECLUSTER=1
    527 # options	RF_INCLUDE_INTERDECLUSTER=1
    528 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    529 # options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    530 
    531 pseudo-device	rnd			# /dev/random and in-kernel generator
    532 #options 	RND_COM			# use "com" randomness as well (BROKEN)
    533 
    534 config	netbsd root on ? type ?
    535