GENERIC revision 1.189
1# $NetBSD: GENERIC,v 1.189 2002/10/14 18:39:25 elric Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.7 2002/10/14 18:23:30 elric Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.189 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options DRACO 41options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47options P5PPC68KBOARD # Phase5 PPC/68K board support 48# 49# processors this kernel should support 50# 51options M68060 # support for 060 52options M060SP # MC68060 software support (Required for 060) 53options M68040 # support for 040 54options FPSP # MC68040 floating point support 55options M68030 # support for 030 56options M68020 # support for 020/851 57options FPU_EMULATE # FPU emulation 58 59# 60# Networking options 61# 62options INET # IP networking support (Required) 63options INET6 # IPV6 64#options IPSEC # IP security 65#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66#options IPSEC_DEBUG # debug for IP security 67#options GATEWAY # Packet forwarding 68#options DIRECTED_BROADCAST # Broadcast across subnets 69 70#options MROUTING # Multicast routing 71options NS # XNS 72#options NSIP # XNS tunneling over IP 73options ISO,TPIP # OSI 74#options EON # OSI tunneling over IP 75options CCITT,LLC,HDLC # X.25 76options NETATALK # AppleTalk networking protocols 77#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 79options PPP_BSDCOMP # BSD-Compress compression support for PPP 80options PPP_DEFLATE # Deflate compression support for PPP 81options PPP_FILTER # Active filter support for PPP (requires bpf) 82options PFIL_HOOKS # pfil(9) packet filter hooks 83options IPFILTER_LOG # ipmon(8) log support 84#options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86# Filesystems 87file-system FFS # Berkeley fast file system 88file-system EXT2FS # second extended file system (linux) 89#file-system LFS # log-structured filesystem (experimental) 90 91file-system MFS # Memory based filesystem 92 93file-system NFS # Network File System client side code 94file-system ADOSFS # AmigaDOS file system 95file-system CD9660 # ISO 9660 + Rock Ridge filesystem 96file-system MSDOSFS # MS-DOS filesystem 97 98file-system KERNFS # kernel data-structure filesystem 99 100file-system FDESC # user file descriptor filesystem 101file-system NULLFS # loopback filesystem 102file-system OVERLAY # overlay filesystem 103#file-system PORTAL # Portal filesystem 104file-system PROCFS # /proc filesystem 105file-system UMAPFS # NULLFS + uid and gid remapping 106file-system UNION # union filesystem 107 108# Filesystem options 109 110#options FFS_EI # FFS Endian Independant support 111 112options QUOTA # User and group quotas in FFS 113options SOFTDEP # FFS soft updates support. 114options NFSSERVER # Network File System server side code 115 116#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 117 # immutable) behave as system flags. 118 119# 120# Compatibility options for various existing systems 121# 122 123#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 124options COMPAT_43 # compatibility with 4.3BSD interfaces 125options COMPAT_09 # compatibility with NetBSD 0.9 126options COMPAT_10 # compatibility with NetBSD 1.0 127options COMPAT_12 # compatibility with NetBSD 1.2 128options COMPAT_13 # compatibility with NetBSD 1.3 129options COMPAT_14 # compatibility with NetBSD 1.4 130options COMPAT_SUNOS # Support to run Sun (m68k) executables 131options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 132options COMPAT_NOMID # allow nonvalid machine id executables 133#options COMPAT_LINUX # Support to run Linux/m68k executables 134 135options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 136options COMPAT_AOUT_M68K # actually make some system calls work. 137 138# 139# Support for System V IPC facilities. 140# 141options SYSVSHM # System V-like shared memory 142options SYSVMSG # System V-like messages 143options SYSVSEM # System V-like semaphores 144#options SEMMNI=10 # number of semaphore identifiers 145#options SEMMNS=60 # number of semaphores in system 146#options SEMUME=10 # max number of undo entries per process 147#options SEMMNU=30 # number of undo structures in system 148 149# 150# Support for various kernel options 151# 152 153options KTRACE # system call tracing support 154options SYSTRACE # system call vetting via systrace(1) 155options LKM # Loadable kernel modules 156options UCONSOLE # anyone can redirect a virtual console 157#options INSECURE # disable kernel security levels 158options SCSIVERBOSE # human readable SCSI error messages 159options USERCONF # userconf(4) support 160options NTP # NTP phase/frequency locked loop 161#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 162 163# 164# Misc. debugging options 165# 166options DDB # Kernel debugger 167#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 168options DIAGNOSTIC # Extra kernel sanity checks 169#options DEBUG # Enable misc. kernel debugging code 170#options SYSCALL_DEBUG # debug all syscalls. 171#options SCSIDEBUG # Add SCSI debugging statements 172#options PANICBUTTON # Forced crash via keypress (?) 173 174# 175# Amiga specific options 176# 177#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 178 # first bank of RAM. (default: unlimited) 179#options NKPTADD=4 # set this for 4 additional KPT pages 180#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 181 # per 16 MB (1<<24 bytes) of RAM 182 # uncomment and decrease this, or uncomment and 183 # increase NKPTADD if you get "out of PT pages" 184 # panics. 185 186# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 187# before the 10 secondinterval ends, or that KBDRESET does work at all. 188#options KBDRESET # sync on Ctrl-Amiga-Amiga 189 190# These options improve performance with the built-in serial port 191# on slower Amigas. Try the larger buffers first then lev6_defer. 192#options SERIBUF_SIZE=4096 193#options SEROBUF_SIZE=32 194#options LEV6_DEFER # defers l6 to l4 (below serial l5) 195 196options RETINACONSOLE # enable code to allow retina to be console 197options ULOWELLCONSOLE # enable code to allow a2410 to be console 198options CL5426CONSOLE # Cirrus console 199options CV64CONSOLE # CyberVision console 200options TSENGCONSOLE # Tseng console 201options CV3DCONSOLE # CyberVision 64/3D console 202 203options GRF_ECS # Enhanced Chip Set 204options GRF_NTSC # NTSC 205options GRF_PAL # PAL 206options GRF_A2024 # Support for the A2024 207options GRF_AGA # AGA Chip Set 208options GRF_AGA_VGA # AGA VGAONLY timing 209options GRF_SUPER72 # AGA Super-72 210#options KFONT_8X11 # 8x11 font 211 212# select a font for the console according to the character set and keymap 213# you want to use 214options KFONT_CONS_ISO8859_1 215#options KFONT_CONS_ISO8859_2 216 217# This is how you would tell the kernel the A2410 oscillator frequencies: 218# The used frequencies are the defaults, and do not need option setting 219#options ULOWELL_OSC1=36000000 220#options ULOWELL_OSC2=66667000 221 222# This is how you specify the blitting speed, higher values may speed up blits 223# a littel bit. If you raise this value too much some trash may appear. 224# the commented version is the default. 225#options RH_MEMCLK=61000000 226# this option enables the 64 bit sprite which does not work 227# for quite a few people. E.g. The cursor sprite will turn to a block 228# when moved to the top of the screen in X. 229#options RH_64BIT_SPRITE 230# enables fast scroll code appears to now work on 040 systems. 231#options RETINA_SPEED_HACK 232# enables the Hardwarecursor which does not work on some systems. 233#options RH_HARDWARECURSOR 234 235# wscons aware interface to amiga custom chips. 236# If you enable it enable also wskbd. 237# 238 239#amidisplaycc0 at mainbus0 # wscons interface to custom chips 240#wsdisplay0 at amidisplaycc0 console ? 241#options WSEMUL_VT100 242#options FONT_BOLD8x16 243#options FONT_VT220L8x10 244 245grfcc0 at mainbus0 # custom chips 246grfrt0 at zbus0 # retina II 247grfrh0 at zbus0 # retina III 248grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 249grful0 at zbus0 # A2410 250grfcv0 at zbus0 # CyberVision 64 251grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 252grfcv3d0 at zbus0 # CyberVision 64/3D 253 254grf0 at grfcc0 255grf1 at grfrt0 256grf2 at grfrh0 257grf3 at grfcl? 258grf4 at grful0 259grf5 at grfcv0 260grf6 at grfet? 261grf7 at grfcv3d0 262ite0 at grf0 # terminal emulators for grfs 263ite1 at grf1 # terminal emulators for grfs 264ite2 at grf2 # terminal emulators for grfs 265ite3 at grf3 # terminal emulators for grfs 266ite4 at grf4 # terminal emulators for grfs 267ite5 at grf5 # terminal emulators for grfs 268ite6 at grf6 # terminal emulators for grfs 269ite7 at grf7 # terminal emulators for grfs 270 271msc0 at zbus0 # A2232 MSC multiport serial. 272mfc0 at zbus0 # MultiFaceCard I/O board 273mfcs0 at mfc0 unit 0 # MFC serial 274mfcs1 at mfc0 unit 1 # MFC serial 275#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 276#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 277#mfcs2 at mfc1 unit 0 278#mfcs3 at mfc1 unit 1 279#mfcp1 at mfc1 unit 0 280 281hyper* at zbus? # zbus HyperCom3/3+/4/4+ 282#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 283com* at hyper? port ? # Hypercom3/4 serial ports 284lpt* at hyper? port ? # Hypercom3+/4+ parallel port 285 286#options IOBZCLOCK=22118400 # default, uncomment the next line 287#options IOBZCLOCK=24000000 # if needed. 288 289iobl* at zbus? # zbus IOBlix 290com* at iobl? port ? # IOBlix serial ports 291lpt* at iobl? port ? # IOBlix parallel ports 292 293 294# 295# Keyboard device. Optionally can attach a wskbd. 296# wskbd works together with a wsdisplay so enable them both if you will. 297# Don't enable wskbd if you use ite. 298# 299# XXX in std.amiga: kbd0 at mainbus0 300 301#wskbd0 at kbd0 console ? 302 303 304# 305# Amiga Mainboard devices (sans graphics and keyboard) 306# 307 308ser0 at mainbus0 # Amiga onboard serial 309par0 at mainbus0 # Amiga onboard parallel 310ms* at mainbus0 # Amiga mice 311fdc0 at mainbus0 # Amiga FDC 312fd* at fdc0 unit ? # floppy disks on the later 313a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 314a2kbbc0 at mainbus0 # A2000 battery backed clock 315aucc* at mainbus0 # Amiga CC audio 316audio* at aucc? 317 318# 319# DraCo Mainboard devices (sans keyboard) 320# 321 322drbbc0 at mainbus0 # DraCo battery backed clock 323drsupio0 at mainbus0 # DraCo superio chip 324com* at drsupio? port ? # DraCo serial 325lpt0 at drsupio? port ? # DraCo parallel 326 327# 328# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 329# 330 331 332repulse* at zbus0 # ALiENDESiGN Repulse 333audio* at repulse? 334 335toccata* at zbus0 # MacroSystem GmbH Toccata 336audio* at toccata? 337 338# Ethernet cards: 339le* at zbus0 # A2065, Ameristar, Ariadne 340ne* at zbus0 # AriadneII, X-surf 341ed* at zbus0 # Hydra, ASDG LanRover 342es* at zbus0 # CEI A4066 EthernetPLUS 343qn* at zbus0 # Quicknet 344 345# Arcnet 346bah* at zbus0 # C=/Ameristar A2060 / 560 347 348# Greater Valley Product Bus 349gvpbus* at zbus0 350 351# scsi stuff, all possible 352gtsc0 at gvpbus? # GVP series II scsi 353scsibus* at gtsc0 354ahsc0 at mainbus0 # A3000 scsi 355scsibus* at ahsc0 356atzsc0 at zbus0 # A2091 scsi 357scsibus* at atzsc0 358wstsc0 at zbus0 # Wordsync II scsi 359scsibus* at wstsc0 360ivsc0 at zbus0 # IVS scsi 361scsibus* at ivsc0 362mlhsc0 at zbus0 # Hacker scsi 363scsibus* at mlhsc0 364otgsc0 at zbus0 # 12 gauge scsi 365scsibus* at otgsc0 366zssc0 at zbus0 # Zeus scsi 367scsibus* at zssc0 368mgnsc0 at zbus0 # Magnum scsi 369scsibus* at mgnsc0 370wesc0 at zbus0 # Warp Engine scsi 371scsibus* at wesc0 372afsc0 at zbus0 # A4091 scsi 373scsibus* at afsc0 374aftsc0 at mainbus0 # A4000T scsi 375scsibus* at aftsc0 376flsc0 at zbus0 # FastlaneZ3 scsi 377scsibus* at flsc0 378bzsc0 at zbus0 # Blizzard 1230 I,II scsi 379scsibus* at bzsc0 380bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 381scsibus* at bzivsc0 382bztzsc0 at zbus0 # Blizzard 2060 scsi 383scsibus* at bztzsc0 384cbsc0 at zbus0 # CyberSCSI I 385scsibus* at cbsc0 386cbiisc0 at zbus0 # CyberSCSI II 387scsibus* at cbiisc0 388cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 389scsibus* at cbiiisc0 390empsc0 at zbus0 # Emplant scsi 391scsibus* at empsc0 392#idesc0 at mainbus0 # A4000 & A1200 IDE 393#scsibus* at idesc0 394 395# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 396# <<< are uncommented >>> 397wdc0 at mainbus0 # A4000 & A1200 IDE bus 398wd* at wdc? drive ? # + drives 399atapibus* at wdc? channel ? # ATAPI bus 400cd* at atapibus? drive ? # ATAPI CD-ROM drives 401sd* at atapibus? drive ? # ATAPI disk drives 402 403pccard0 at mainbus0 404pcmcia* at pccard0 405com* at pcmcia? function ? # Modems and serial cards 406pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 407aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 408wdc* at pcmcia? function ? 409awi* at pcmcia? function ? # BayStack 650 (802.11FH) 410ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 411mbe* at pcmcia? function ? # MB8696x based Ethernet 412ne* at pcmcia? function ? # NE2000-compatible Ethernet 413sm* at pcmcia? function ? # Megahertz Ethernet 414mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 415com* at mhzc? 416sm* at mhzc? 417 418 419drsc0 at mainbus0 # DraCo scsi 420scsibus* at drsc0 421 422 423# each hard drive from low target to high 424# will configure to the next available sd unit number 425sd* at scsibus? target ? lun ? # scsi disks 426st* at scsibus? target ? lun ? # scsi tapes 427cd* at scsibus? target ? lun ? # scsi cds 428ch* at scsibus? target ? lun ? # scsi autochangers 429ss* at scsibus? target ? lun ? # scsi scanner 430uk* at scsibus? target ? lun ? # scsi unknown 431 432pseudo-device loop # loopback network interface 433pseudo-device sl 1 # SLIP network interfaces 434pseudo-device ppp 1 # PPP network interfaces 435pseudo-device pppoe # PPP over Ethernet (RFC 2516) 436pseudo-device tun 1 # network tunnel line discipline 437#pseudo-device gre 2 # generic L3 over IP tunnel 438pseudo-device bpfilter 16 # Berkeley packet filter 439pseudo-device ipfilter # IP Filter package 440pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 441#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 442#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 443pseudo-device vlan # IEEE 802.1q encapsulation 444pseudo-device bridge # simple inter-network bridging 445 446pseudo-device view 4 # views (needed for grfcc) 447pseudo-device pty # pseudo-terminals 448pseudo-device clockctl # user control of clock subsystem 449 450pseudo-device vnd 4 # vnode pseudo-disks 451pseudo-device ccd 4 # concatenated disk devices 452#pseudo-device cgd 4 # cryptographic disk devices 453pseudo-device raid 8 # RAIDframe disk driver 454options RAID_AUTOCONFIG # auto-configuration of RAID components 455# Options to enable various other RAIDframe RAID types. 456# options RF_INCLUDE_EVENODD=1 457# options RF_INCLUDE_RAID5_RS=1 458# options RF_INCLUDE_PARITYLOGGING=1 459# options RF_INCLUDE_CHAINDECLUSTER=1 460# options RF_INCLUDE_INTERDECLUSTER=1 461# options RF_INCLUDE_PARITY_DECLUSTERING=1 462# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 463 464pseudo-device rnd # /dev/random and in-kernel generator 465#options RND_COM # use "com" randomness as well (BROKEN) 466 467config netbsd root on ? type ? 468