GENERIC revision 1.199
1 # $NetBSD: GENERIC,v 1.199 2003/10/08 11:03:55 bouyer Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.16 2003/10/08 11:02:45 bouyer Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.199 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options DRACO 41 options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47 options P5PPC68KBOARD # Phase5 PPC/68K board support 48 # 49 # processors this kernel should support 50 # 51 options M68060 # support for 060 52 options M060SP # MC68060 software support (Required for 060) 53 options M68040 # support for 040 54 options FPSP # MC68040 floating point support 55 options M68030 # support for 030 56 options M68020 # support for 020/851 57 options FPU_EMULATE # FPU emulation 58 59 # 60 # Networking options 61 # 62 options INET # IP networking support (Required) 63 options INET6 # IPV6 64 #options IPSEC # IP security 65 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66 #options IPSEC_DEBUG # debug for IP security 67 #options GATEWAY # Packet forwarding 68 #options DIRECTED_BROADCAST # Broadcast across subnets 69 70 #options MROUTING # Multicast routing 71 options NS # XNS 72 #options NSIP # XNS tunneling over IP 73 options ISO,TPIP # OSI 74 #options EON # OSI tunneling over IP 75 options CCITT,LLC,HDLC # X.25 76 options NETATALK # AppleTalk networking protocols 77 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 79 options PPP_BSDCOMP # BSD-Compress compression support for PPP 80 options PPP_DEFLATE # Deflate compression support for PPP 81 options PPP_FILTER # Active filter support for PPP (requires bpf) 82 options PFIL_HOOKS # pfil(9) packet filter hooks 83 options IPFILTER_LOG # ipmon(8) log support 84 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86 # Filesystems 87 file-system FFS # Berkeley fast file system 88 file-system EXT2FS # second extended file system (linux) 89 #file-system LFS # log-structured filesystem (experimental) 90 91 file-system MFS # Memory based filesystem 92 93 file-system NFS # Network File System client side code 94 file-system ADOSFS # AmigaDOS file system 95 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 96 file-system MSDOSFS # MS-DOS filesystem 97 98 file-system KERNFS # kernel data-structure filesystem 99 100 file-system FDESC # user file descriptor filesystem 101 file-system NULLFS # loopback filesystem 102 file-system OVERLAY # overlay filesystem 103 #file-system PORTAL # Portal filesystem 104 file-system PROCFS # /proc filesystem 105 file-system UMAPFS # NULLFS + uid and gid remapping 106 file-system UNION # union filesystem 107 108 # Filesystem options 109 110 #options FFS_EI # FFS Endian Independant support 111 112 options QUOTA # User and group quotas in FFS 113 options SOFTDEP # FFS soft updates support. 114 options NFSSERVER # Network File System server side code 115 116 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 117 # immutable) behave as system flags. 118 119 # 120 # Compatibility options for various existing systems 121 # 122 123 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 124 options COMPAT_43 # compatibility with 4.3BSD interfaces 125 options COMPAT_09 # compatibility with NetBSD 0.9 126 options COMPAT_10 # compatibility with NetBSD 1.0 127 options COMPAT_12 # compatibility with NetBSD 1.2 128 options COMPAT_13 # compatibility with NetBSD 1.3 129 options COMPAT_14 # compatibility with NetBSD 1.4 130 options COMPAT_15 # compatibility with NetBSD 1.5 131 options COMPAT_16 # compatibility with NetBSD 1.6 132 options COMPAT_SUNOS # Support to run Sun (m68k) executables 133 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 134 options COMPAT_NOMID # allow nonvalid machine id executables 135 #options COMPAT_LINUX # Support to run Linux/m68k executables 136 137 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 138 options COMPAT_AOUT_M68K # actually make some system calls work. 139 140 # 141 # Support for System V IPC facilities. 142 # 143 options SYSVSHM # System V-like shared memory 144 options SYSVMSG # System V-like messages 145 options SYSVSEM # System V-like semaphores 146 #options SEMMNI=10 # number of semaphore identifiers 147 #options SEMMNS=60 # number of semaphores in system 148 #options SEMUME=10 # max number of undo entries per process 149 #options SEMMNU=30 # number of undo structures in system 150 151 # 152 # Support for various kernel options 153 # 154 155 options KTRACE # system call tracing support 156 options SYSTRACE # system call vetting via systrace(1) 157 options LKM # Loadable kernel modules 158 #options INSECURE # disable kernel security levels 159 options SCSIVERBOSE # human readable SCSI error messages 160 options USERCONF # userconf(4) support 161 options NTP # NTP phase/frequency locked loop 162 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 163 164 # Enable experimental buffer queue strategy for better responsiveness under 165 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 166 #options NEW_BUFQ_STRATEGY 167 168 # 169 # Misc. debugging options 170 # 171 options DDB # Kernel debugger 172 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 173 options DIAGNOSTIC # Extra kernel sanity checks 174 #options DEBUG # Enable misc. kernel debugging code 175 #options SYSCALL_DEBUG # debug all syscalls. 176 #options SCSIDEBUG # Add SCSI debugging statements 177 #options PANICBUTTON # Forced crash via keypress (?) 178 179 # 180 # Amiga specific options 181 # 182 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 183 # first bank of RAM. (default: unlimited) 184 #options NKPTADD=4 # set this for 4 additional KPT pages 185 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 186 # per 16 MB (1<<24 bytes) of RAM 187 # uncomment and decrease this, or uncomment and 188 # increase NKPTADD if you get "out of PT pages" 189 # panics. 190 191 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 192 # before the 10 secondinterval ends, or that KBDRESET does work at all. 193 #options KBDRESET # sync on Ctrl-Amiga-Amiga 194 195 # These options improve performance with the built-in serial port 196 # on slower Amigas. Try the larger buffers first then lev6_defer. 197 #options SERIBUF_SIZE=4096 198 #options SEROBUF_SIZE=32 199 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 200 201 #options DEVRELOAD # implement /dev/reload 202 # # currently only works for a.out kernels 203 204 options RETINACONSOLE # enable code to allow retina to be console 205 options ULOWELLCONSOLE # enable code to allow a2410 to be console 206 options CL5426CONSOLE # Cirrus console 207 options CV64CONSOLE # CyberVision console 208 options TSENGCONSOLE # Tseng console 209 options CV3DCONSOLE # CyberVision 64/3D console 210 211 options GRF_ECS # Enhanced Chip Set 212 options GRF_NTSC # NTSC 213 options GRF_PAL # PAL 214 options GRF_A2024 # Support for the A2024 215 options GRF_AGA # AGA Chip Set 216 options GRF_AGA_VGA # AGA VGAONLY timing 217 options GRF_SUPER72 # AGA Super-72 218 #options KFONT_8X11 # 8x11 font 219 220 # select a font for the console according to the character set and keymap 221 # you want to use 222 options KFONT_CONS_ISO8859_1 223 #options KFONT_CONS_ISO8859_2 224 225 # This is how you would tell the kernel the A2410 oscillator frequencies: 226 # The used frequencies are the defaults, and do not need option setting 227 #options ULOWELL_OSC1=36000000 228 #options ULOWELL_OSC2=66667000 229 230 # This is how you specify the blitting speed, higher values may speed up blits 231 # a littel bit. If you raise this value too much some trash may appear. 232 # the commented version is the default. 233 #options RH_MEMCLK=61000000 234 # this option enables the 64 bit sprite which does not work 235 # for quite a few people. E.g. The cursor sprite will turn to a block 236 # when moved to the top of the screen in X. 237 #options RH_64BIT_SPRITE 238 # enables fast scroll code appears to now work on 040 systems. 239 #options RETINA_SPEED_HACK 240 # enables the Hardwarecursor which does not work on some systems. 241 #options RH_HARDWARECURSOR 242 243 # wscons aware interface to amiga custom chips. 244 # If you enable it enable also wskbd. 245 # 246 247 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 248 #wsdisplay0 at amidisplaycc0 console ? 249 #options WSEMUL_VT100 250 #options FONT_BOLD8x16 251 #options FONT_VT220L8x10 252 253 grfcc0 at mainbus0 # custom chips 254 grfrt0 at zbus0 # retina II 255 grfrh0 at zbus0 # retina III 256 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 257 grful0 at zbus0 # A2410 258 grfcv0 at zbus0 # CyberVision 64 259 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 260 grfcv3d0 at zbus0 # CyberVision 64/3D 261 262 grf0 at grfcc0 263 grf1 at grfrt0 264 grf2 at grfrh0 265 grf3 at grfcl? 266 grf4 at grful0 267 grf5 at grfcv0 268 grf6 at grfet? 269 grf7 at grfcv3d0 270 ite0 at grf0 # terminal emulators for grfs 271 ite1 at grf1 # terminal emulators for grfs 272 ite2 at grf2 # terminal emulators for grfs 273 ite3 at grf3 # terminal emulators for grfs 274 ite4 at grf4 # terminal emulators for grfs 275 ite5 at grf5 # terminal emulators for grfs 276 ite6 at grf6 # terminal emulators for grfs 277 ite7 at grf7 # terminal emulators for grfs 278 279 msc0 at zbus0 # A2232 MSC multiport serial. 280 mfc0 at zbus0 # MultiFaceCard I/O board 281 mfcs0 at mfc0 unit 0 # MFC serial 282 mfcs1 at mfc0 unit 1 # MFC serial 283 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 284 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 285 #mfcs2 at mfc1 unit 0 286 #mfcs3 at mfc1 unit 1 287 #mfcp1 at mfc1 unit 0 288 289 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 290 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 291 com* at hyper? port ? # Hypercom3/4 serial ports 292 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 293 294 #options IOBZCLOCK=22118400 # default, uncomment the next line 295 #options IOBZCLOCK=24000000 # if needed. 296 297 iobl* at zbus? # zbus IOBlix 298 com* at iobl? port ? # IOBlix serial ports 299 lpt* at iobl? port ? # IOBlix parallel ports 300 301 302 # 303 # Keyboard device. Optionally can attach a wskbd. 304 # wskbd works together with a wsdisplay so enable them both if you will. 305 # Don't enable wskbd if you use ite. 306 # 307 # XXX in std.amiga: kbd0 at mainbus0 308 309 #wskbd0 at kbd0 console ? 310 311 312 # 313 # Amiga Mainboard devices (sans graphics and keyboard) 314 # 315 316 ser0 at mainbus0 # Amiga onboard serial 317 par0 at mainbus0 # Amiga onboard parallel 318 ms* at mainbus0 # Amiga mice 319 fdc0 at mainbus0 # Amiga FDC 320 fd* at fdc0 unit ? # floppy disks on the later 321 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 322 a2kbbc0 at mainbus0 # A2000 battery backed clock 323 aucc* at mainbus0 # Amiga CC audio 324 audio* at aucc? 325 326 327 #wsmouse* at ms? 328 329 # 330 # DraCo Mainboard devices (sans keyboard) 331 # 332 333 drbbc0 at mainbus0 # DraCo battery backed clock 334 drsupio0 at mainbus0 # DraCo superio chip 335 com* at drsupio? port ? # DraCo serial 336 lpt0 at drsupio? port ? # DraCo parallel 337 338 # 339 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 340 # 341 342 343 repulse* at zbus0 # ALiENDESiGN Repulse 344 audio* at repulse? 345 346 toccata* at zbus0 # MacroSystem GmbH Toccata 347 audio* at toccata? 348 349 # Ethernet cards: 350 le* at zbus0 # A2065, Ameristar, Ariadne 351 ne* at zbus0 # AriadneII, X-surf 352 ed* at zbus0 # Hydra, ASDG LanRover 353 es* at zbus0 # CEI A4066 EthernetPLUS 354 qn* at zbus0 # Quicknet 355 356 # Arcnet 357 bah* at zbus0 # C=/Ameristar A2060 / 560 358 359 # Greater Valley Product Bus 360 gvpbus* at zbus0 361 362 # scsi stuff, all possible 363 gtsc0 at gvpbus? # GVP series II scsi 364 scsibus* at gtsc0 365 ahsc0 at mainbus0 # A3000 scsi 366 scsibus* at ahsc0 367 atzsc0 at zbus0 # A2091 scsi 368 scsibus* at atzsc0 369 wstsc0 at zbus0 # Wordsync II scsi 370 scsibus* at wstsc0 371 ivsc0 at zbus0 # IVS scsi 372 scsibus* at ivsc0 373 mlhsc0 at zbus0 # Hacker scsi 374 scsibus* at mlhsc0 375 otgsc0 at zbus0 # 12 gauge scsi 376 scsibus* at otgsc0 377 zssc0 at zbus0 # Zeus scsi 378 scsibus* at zssc0 379 mgnsc0 at zbus0 # Magnum scsi 380 scsibus* at mgnsc0 381 wesc0 at zbus0 # Warp Engine scsi 382 scsibus* at wesc0 383 afsc0 at zbus0 # A4091 scsi 384 scsibus* at afsc0 385 aftsc0 at mainbus0 # A4000T scsi 386 scsibus* at aftsc0 387 flsc0 at zbus0 # FastlaneZ3 scsi 388 scsibus* at flsc0 389 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 390 scsibus* at bzsc0 391 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 392 scsibus* at bzivsc0 393 bztzsc0 at zbus0 # Blizzard 2060 scsi 394 scsibus* at bztzsc0 395 cbsc0 at zbus0 # CyberSCSI I 396 scsibus* at cbsc0 397 cbiisc0 at zbus0 # CyberSCSI II 398 scsibus* at cbiisc0 399 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 400 scsibus* at cbiiisc0 401 empsc0 at zbus0 # Emplant scsi 402 scsibus* at empsc0 403 #idesc0 at mainbus0 # A4000 & A1200 IDE 404 #scsibus* at idesc0 405 406 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 407 # <<< are uncommented >>> 408 wdc0 at mainbus0 # A4000 & A1200 IDE bus 409 atabus* at wdc? channel ? # ATA bus 410 wd* at atabus? drive ? # + drives 411 atapibus* at atabus? # ATAPI bus 412 cd* at atapibus? drive ? # ATAPI CD-ROM drives 413 sd* at atapibus? drive ? # ATAPI disk drives 414 415 pccard0 at mainbus0 416 pcmcia* at pccard0 417 com* at pcmcia? function ? # Modems and serial cards 418 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 419 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 420 wdc* at pcmcia? function ? 421 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 422 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 423 mbe* at pcmcia? function ? # MB8696x based Ethernet 424 ne* at pcmcia? function ? # NE2000-compatible Ethernet 425 sm* at pcmcia? function ? # Megahertz Ethernet 426 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 427 com* at mhzc? 428 sm* at mhzc? 429 430 431 drsc0 at mainbus0 # DraCo scsi 432 scsibus* at drsc0 433 434 435 # each hard drive from low target to high 436 # will configure to the next available sd unit number 437 sd* at scsibus? target ? lun ? # scsi disks 438 st* at scsibus? target ? lun ? # scsi tapes 439 cd* at scsibus? target ? lun ? # scsi cds 440 ch* at scsibus? target ? lun ? # scsi autochangers 441 ss* at scsibus? target ? lun ? # scsi scanner 442 uk* at scsibus? target ? lun ? # scsi unknown 443 444 pseudo-device loop # loopback network interface 445 pseudo-device sl 1 # SLIP network interfaces 446 pseudo-device ppp 1 # PPP network interfaces 447 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 448 pseudo-device tun 1 # network tunnel line discipline 449 #pseudo-device gre 2 # generic L3 over IP tunnel 450 pseudo-device bpfilter 16 # Berkeley packet filter 451 pseudo-device ipfilter # IP Filter package 452 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 453 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 454 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 455 pseudo-device vlan # IEEE 802.1q encapsulation 456 pseudo-device bridge # simple inter-network bridging 457 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 458 459 pseudo-device view 4 # views (needed for grfcc) 460 pseudo-device pty # pseudo-terminals 461 pseudo-device clockctl # user control of clock subsystem 462 463 pseudo-device vnd 4 # vnode pseudo-disks 464 pseudo-device ccd 4 # concatenated disk devices 465 #pseudo-device cgd 4 # cryptographic disk devices 466 pseudo-device raid 8 # RAIDframe disk driver 467 options RAID_AUTOCONFIG # auto-configuration of RAID components 468 # Options to enable various other RAIDframe RAID types. 469 # options RF_INCLUDE_EVENODD=1 470 # options RF_INCLUDE_RAID5_RS=1 471 # options RF_INCLUDE_PARITYLOGGING=1 472 # options RF_INCLUDE_CHAINDECLUSTER=1 473 # options RF_INCLUDE_INTERDECLUSTER=1 474 # options RF_INCLUDE_PARITY_DECLUSTERING=1 475 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 476 477 pseudo-device rnd # /dev/random and in-kernel generator 478 #options RND_COM # use "com" randomness as well (BROKEN) 479 480 pseudo-device ksyms # /dev/ksyms (kernel symbols) 481 482 config netbsd root on ? type ? 483
Indexes created Fri Oct 03 02:09:57 GMT 2025