GENERIC revision 1.206
1# $NetBSD: GENERIC,v 1.206 2004/11/10 17:25:21 christos Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.23 2004/06/28 21:07:47 bouyer Exp $
7#
8# GENERIC machine description file
9#
10# This machine description file is used to generate the default NetBSD
11# kernel.  The generic kernel does not include all options, subsystems
12# and device drivers, but should be useful for most applications.
13#
14# The machine description file can be customised for your specific
15# machine to reduce the kernel size and improve its performance.
16#
17# For further information on compiling NetBSD kernels, see the config(8)
18# man page.
19#
20# For further information on hardware support for this architecture, see
21# the intro(4) man page.  For further information about kernel options
22# for this architecture, see the options(4) man page.  For an explanation
23# of each device driver in this file see the section 4 man page for the
24# device.
25
26
27include "arch/amiga/conf/std.amiga"
28
29options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
30
31#ident 		"GENERIC-$Revision: 1.206 $"
32
33
34maxusers	8
35options 	RTC_OFFSET=0
36
37#
38# mainboards to support (in addition to Amiga)
39#
40options 	DRACO
41options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
42				# MC68060 with an OS ROM up to (at least)
43				# V40 (OS3.1) and want to boot with the
44				# bootblock.
45				# You do not need this if you have a DraCo,
46				# have no 68060 or NEVER use the bootblock
47options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
48#
49# processors this kernel should support
50#
51options 	M68060		# support for 060
52options 	M060SP		# MC68060 software support (Required for 060)
53options 	M68040		# support for 040
54options 	FPSP		# MC68040 floating point support
55options 	M68030		# support for 030
56options 	M68020		# support for 020/851
57options 	FPU_EMULATE	# FPU emulation
58
59#
60# Networking options
61#
62options 	INET		# IP networking support (Required)
63options 	INET6		# IPV6
64#options 	IPSEC		# IP security
65#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
66#options 	IPSEC_DEBUG	# debug for IP security
67#options 	GATEWAY		# Packet forwarding
68#options 	DIRECTED_BROADCAST	# Broadcast across subnets
69
70#options 	MROUTING	# Multicast routing
71#options 	PIM		# Protocol Independent Multicast
72options 	NS		# XNS
73#options 	NSIP		# XNS tunneling over IP
74options 	ISO,TPIP	# OSI
75#options 	EON		# OSI tunneling over IP
76options 	CCITT,LLC,HDLC	# X.25
77options 	NETATALK	# AppleTalk networking protocols
78#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
79
80options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
81options 	PPP_DEFLATE	# Deflate compression support for PPP
82options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
83options 	PFIL_HOOKS	# pfil(9) packet filter hooks
84options 	IPFILTER_LOG	# ipmon(8) log support
85#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
86
87#options 	ALTQ		# Manipulate network interfaces' output queues
88#options 	ALTQ_BLUE	# Stochastic Fair Blue
89#options 	ALTQ_CBQ	# Class-Based Queueing
90#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
91#options 	ALTQ_FIFOQ	# First-In First-Out Queue
92#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
93#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
94#options 	ALTQ_LOCALQ	# Local queueing discipline
95#options 	ALTQ_PRIQ	# Priority Queueing
96#options 	ALTQ_RED	# Random Early Detection
97#options 	ALTQ_RIO	# RED with IN/OUT
98#options 	ALTQ_WFQ	# Weighted Fair Queueing
99
100# Filesystems
101file-system 	FFS		# Berkeley fast file system
102file-system 	EXT2FS		# second extended file system (linux)
103#file-system 	LFS		# log-structured filesystem (experimental)
104
105file-system 	MFS		# Memory based filesystem
106
107file-system 	NFS		# Network File System client side code
108file-system 	ADOSFS		# AmigaDOS file system
109file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
110file-system 	MSDOSFS		# MS-DOS filesystem
111
112file-system 	KERNFS		# kernel data-structure filesystem
113
114file-system 	FDESC		# user file descriptor filesystem
115file-system 	NULLFS		# loopback filesystem
116file-system 	OVERLAY		# overlay filesystem
117#file-system 	PORTAL		# Portal filesystem
118file-system 	PROCFS		# /proc filesystem
119file-system 	UMAPFS		# NULLFS + uid and gid remapping
120file-system 	UNION		# union filesystem
121
122# Filesystem options
123
124#options 	FFS_EI		# FFS Endian Independant support
125
126options 	QUOTA		# User and group quotas in FFS
127options 	SOFTDEP		# FFS soft updates support.
128options 	NFSSERVER	# Network File System server side code
129
130#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
131				# immutable) behave as system flags.
132
133#
134# Compatibility options for various existing systems
135#
136
137#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
138options 	COMPAT_43	# compatibility with 4.3BSD interfaces
139options 	COMPAT_09	# compatibility with NetBSD 0.9
140options 	COMPAT_10	# compatibility with NetBSD 1.0
141options 	COMPAT_12	# compatibility with NetBSD 1.2
142options 	COMPAT_13	# compatibility with NetBSD 1.3
143options 	COMPAT_14	# compatibility with NetBSD 1.4
144options 	COMPAT_15	# compatibility with NetBSD 1.5
145options 	COMPAT_16	# compatibility with NetBSD 1.6
146options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
147options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
148options 	COMPAT_NOMID	# allow nonvalid machine id executables
149#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
150
151options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
152options 	COMPAT_AOUT_M68K # actually make some system calls work.
153options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
154
155#
156# Support for System V IPC facilities.
157#
158options 	SYSVSHM		# System V-like shared memory
159options 	SYSVMSG		# System V-like messages
160options 	SYSVSEM		# System V-like semaphores
161#options 	SEMMNI=10	# number of semaphore identifiers
162#options 	SEMMNS=60	# number of semaphores in system
163#options 	SEMUME=10	# max number of undo entries per process
164#options 	SEMMNU=30	# number of undo structures in system
165options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
166
167#
168# Support for various kernel options
169#
170
171options 	KTRACE		# system call tracing support
172options 	SYSTRACE	# system call vetting via systrace(1)
173options 	LKM		# Loadable kernel modules
174#options 	INSECURE	# disable kernel security levels
175options 	SCSIVERBOSE	# human readable SCSI error messages
176options 	USERCONF	# userconf(4) support
177options 	NTP		# NTP phase/frequency locked loop
178#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
179
180# Enable experimental buffer queue strategy for better responsiveness under 
181# high disk I/O load. Use it with caution - it's not proven to be stable yet.
182#options 	NEW_BUFQ_STRATEGY
183
184#
185# Misc. debugging options
186#
187options 	DDB		# Kernel debugger
188#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
189options 	DIAGNOSTIC	# Extra kernel sanity checks
190#options 	DEBUG		# Enable misc. kernel debugging code
191#options 	SYSCALL_DEBUG	# debug all syscalls.
192#options 	SCSIDEBUG	# Add SCSI debugging statements
193#options 	PANICBUTTON	# Forced crash via keypress (?)
194
195#
196# Amiga specific options
197#
198#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
199				# first bank of RAM. (default: unlimited)
200#options 	NKPTADD=4	# set this for 4 additional KPT pages
201#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
202				# per 16 MB (1<<24 bytes) of RAM
203				# uncomment and decrease this, or uncomment and
204				# increase NKPTADD if you get "out of PT pages"
205				# panics.
206
207# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
208# before the 10 secondinterval ends, or that KBDRESET does work at all.
209#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
210
211# These options improve performance with the built-in serial port
212# on slower Amigas.  Try the larger buffers first then lev6_defer.
213#options 	SERIBUF_SIZE=4096
214#options 	SEROBUF_SIZE=32
215#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
216
217#options	DEVRELOAD	# implement /dev/reload
218#				# currently only works for a.out kernels
219
220options 	RETINACONSOLE	# enable code to allow retina to be console
221options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
222options 	CL5426CONSOLE	# Cirrus console
223options 	CV64CONSOLE	# CyberVision console
224options 	TSENGCONSOLE	# Tseng console
225options 	CV3DCONSOLE	# CyberVision 64/3D console
226
227options 	GRF_ECS		# Enhanced Chip Set
228options 	GRF_NTSC	# NTSC
229options 	GRF_PAL		# PAL
230options 	GRF_A2024	# Support for the A2024
231options 	GRF_AGA		# AGA Chip Set
232options 	GRF_AGA_VGA	# AGA VGAONLY timing
233options 	GRF_SUPER72	# AGA Super-72
234#options 	KFONT_8X11	# 8x11 font
235
236# select a font for the console according to the character set and keymap
237# you want to use
238options        KFONT_CONS_ISO8859_1
239#options         KFONT_CONS_ISO8859_2
240
241# This is how you would tell the kernel the A2410 oscillator frequencies:
242# The used frequencies are the defaults, and do not need option setting
243#options 	ULOWELL_OSC1=36000000
244#options 	ULOWELL_OSC2=66667000
245
246# This is how you specify the blitting speed, higher values may speed up blits
247# a littel bit.  If you raise this value too much some trash may appear.
248# the commented version is the default.
249#options 	RH_MEMCLK=61000000
250# this option enables the 64 bit sprite which does not work
251# for quite a few people.  E.g. The cursor sprite will turn to a block
252# when moved to the top of the screen in X.
253#options 	RH_64BIT_SPRITE
254# enables fast scroll code appears to now work on 040 systems.
255#options 	RETINA_SPEED_HACK
256# enables the Hardwarecursor which does not work on some systems.
257#options 	RH_HARDWARECURSOR
258
259# wscons aware interface to amiga custom chips.
260# If you enable it enable also wskbd.
261#
262
263#amidisplaycc0	at mainbus0		# wscons interface to custom chips
264#wsdisplay0	at amidisplaycc0 console ?
265#options 	WSEMUL_VT100
266#options 	FONT_VT220L8x10
267#options	FONT_VT220ISO8x16
268
269grfcc0		at mainbus0		# custom chips
270grfrt0		at zbus0		# retina II
271grfrh0		at zbus0		# retina III
272grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
273grful0		at zbus0		# A2410
274grfcv0		at zbus0		# CyberVision 64
275grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
276grfcv3d0	at zbus0		# CyberVision 64/3D
277
278grf0		at grfcc0
279grf1		at grfrt0
280grf2		at grfrh0
281grf3		at grfcl?
282grf4		at grful0
283grf5		at grfcv0
284grf6		at grfet?
285grf7		at grfcv3d0
286ite0		at grf0			# terminal emulators for grfs
287ite1		at grf1			# terminal emulators for grfs
288ite2		at grf2			# terminal emulators for grfs
289ite3		at grf3			# terminal emulators for grfs
290ite4		at grf4			# terminal emulators for grfs
291ite5		at grf5			# terminal emulators for grfs
292ite6		at grf6			# terminal emulators for grfs
293ite7		at grf7			# terminal emulators for grfs
294
295msc0		at zbus0		# A2232 MSC multiport serial.
296mfc0		at zbus0		# MultiFaceCard I/O board
297mfcs0		at mfc0 unit 0		# MFC serial
298mfcs1		at mfc0 unit 1		# MFC serial
299#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
300#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
301#mfcs2		at mfc1 unit 0
302#mfcs3		at mfc1 unit 1
303#mfcp1		at mfc1 unit 0
304
305hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
306#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
307com*		at hyper? port ?	# Hypercom3/4 serial ports
308lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
309
310#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
311#options 	IOBZCLOCK=24000000	# if needed.
312
313iobl*		at zbus?		# zbus IOBlix
314com*		at iobl? port ?		# IOBlix serial ports
315lpt*		at iobl? port ?		# IOBlix parallel ports
316
317
318#
319# Keyboard device. Optionally can attach a wskbd.
320# wskbd works together with a wsdisplay so enable them both if you will.
321# Don't enable wskbd if you use ite.
322#
323# XXX in std.amiga: kbd0 at mainbus0
324
325#wskbd0		at kbd0 console ?
326
327
328#
329# Amiga Mainboard devices (sans graphics and keyboard)
330#
331
332ser0		at mainbus0		# Amiga onboard serial
333par0		at mainbus0		# Amiga onboard parallel
334ms*		at mainbus0		# Amiga mice
335fdc0		at mainbus0		# Amiga FDC
336fd*		at fdc0 unit ?		# floppy disks on the later
337a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
338a2kbbc0 	at mainbus0		# A2000 battery backed clock
339aucc*		at mainbus0		# Amiga CC audio
340audio*		at aucc?
341
342
343#wsmouse*	at ms?
344
345#
346# DraCo Mainboard devices (sans keyboard)
347#
348
349drbbc0		at mainbus0		# DraCo battery backed clock
350drsupio0	at mainbus0		# DraCo superio chip
351com*		at drsupio? port ?	# DraCo serial
352lpt0		at drsupio? port ?	# DraCo parallel
353
354#
355# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
356#
357
358
359repulse*	at zbus0		# ALiENDESiGN Repulse
360audio*		at repulse?
361
362toccata*	at zbus0		# MacroSystem GmbH Toccata
363audio*		at toccata?
364
365# Ethernet cards:
366le*		at zbus0		# A2065, Ameristar, Ariadne
367ne*		at zbus0		# AriadneII, X-surf
368ed*		at zbus0		# Hydra, ASDG LanRover
369es*		at zbus0		# CEI A4066 EthernetPLUS
370qn*		at zbus0		# Quicknet
371
372# Arcnet
373bah*		at zbus0		# C=/Ameristar A2060 / 560
374
375# Greater Valley Product Bus
376gvpbus* 	at zbus0
377
378# scsi stuff, all possible
379gtsc0		at gvpbus?		# GVP series II scsi
380scsibus*	at gtsc0
381ahsc0		at mainbus0		# A3000 scsi
382scsibus*	at ahsc0
383atzsc0		at zbus0		# A2091 scsi
384scsibus*	at atzsc0
385wstsc0		at zbus0		# Wordsync II scsi
386scsibus*	at wstsc0
387ivsc0		at zbus0		# IVS scsi
388scsibus*	at ivsc0
389mlhsc0		at zbus0		# Hacker scsi
390scsibus*	at mlhsc0
391otgsc0		at zbus0		# 12 gauge scsi
392scsibus*	at otgsc0
393zssc0		at zbus0		# Zeus scsi
394scsibus*	at zssc0
395mgnsc0		at zbus0		# Magnum scsi
396scsibus*	at mgnsc0
397wesc0		at zbus0		# Warp Engine scsi
398scsibus*	at wesc0
399afsc0		at zbus0		# A4091 scsi
400scsibus*	at afsc0
401aftsc0		at mainbus0		# A4000T scsi
402scsibus*	at aftsc0
403flsc0		at zbus0		# FastlaneZ3 scsi
404scsibus*	at flsc0
405bzsc0		at zbus0		# Blizzard 1230 I,II scsi
406scsibus*	at bzsc0
407bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
408scsibus*	at bzivsc0
409bztzsc0 	at zbus0		# Blizzard 2060 scsi
410scsibus*	at bztzsc0
411cbsc0		at zbus0		# CyberSCSI I
412scsibus*	at cbsc0
413cbiisc0 	at zbus0		# CyberSCSI II
414scsibus*	at cbiisc0
415cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
416scsibus*	at cbiiisc0
417empsc0		at zbus0		# Emplant scsi
418scsibus*	at empsc0
419#idesc0		at mainbus0		# A4000 & A1200 IDE
420#scsibus*	at idesc0
421
422# <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
423# <<< are uncommented >>>
424wdc0		at mainbus0		# A4000 & A1200 IDE bus
425atabus* 	at wdc? channel ?	# ATA bus
426wd*		at atabus? drive ?	#  + drives
427atapibus*	at atabus?		# ATAPI bus
428cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
429sd*		at atapibus? drive ?	# ATAPI disk drives
430
431pccard0		at mainbus0
432pcmcia*		at pccard0
433com*		at pcmcia? function ?		# Modems and serial cards
434pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
435aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
436wdc*		at pcmcia? function ?
437awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
438ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
439mbe*		at pcmcia? function ?		# MB8696x based Ethernet
440ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
441sm*		at pcmcia? function ?		# Megahertz Ethernet
442mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
443com*		at mhzc?
444sm*		at mhzc?
445
446
447drsc0		at mainbus0		# DraCo scsi
448scsibus*	at drsc0
449
450
451# each hard drive from low target to high
452# will configure to the next available sd unit number
453sd*	at scsibus? target ? lun ?	# scsi disks
454st*	at scsibus? target ? lun ?	# scsi tapes
455cd*	at scsibus? target ? lun ?	# scsi cds
456ch*	at scsibus? target ? lun ?	# scsi autochangers
457ss*	at scsibus? target ? lun ?	# scsi scanner
458uk*	at scsibus? target ? lun ?	# scsi unknown
459
460pseudo-device	loop			# loopback network interface
461pseudo-device	sl		1	# SLIP network interfaces
462pseudo-device	ppp		1	# PPP network interfaces
463pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
464pseudo-device	tun		1	# network tunnel line discipline
465#pseudo-device	gre		2	# generic L3 over IP tunnel
466pseudo-device	bpfilter	16	# Berkeley packet filter
467pseudo-device	ipfilter		# IP Filter package
468pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
469#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
470#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
471pseudo-device	vlan			# IEEE 802.1q encapsulation
472pseudo-device	bridge			# simple inter-network bridging
473#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
474#pseudo-device	pf			# PF packet filter
475#pseudo-device	pflog			# PF log if
476
477pseudo-device	view		4	# views (needed for grfcc)
478pseudo-device	pty			# pseudo-terminals
479pseudo-device	clockctl		# user control of clock subsystem
480
481#pseudo-device	wsfont			# wsfont(4) dynamic font loading support
482
483pseudo-device	vnd		4	# vnode pseudo-disks
484pseudo-device	ccd		4	# concatenated disk devices
485#pseudo-device	cgd		4	# cryptographic disk devices
486pseudo-device	raid		8	# RAIDframe disk driver
487options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
488# Options to enable various other RAIDframe RAID types.
489# options 	RF_INCLUDE_EVENODD=1
490# options 	RF_INCLUDE_RAID5_RS=1
491# options 	RF_INCLUDE_PARITYLOGGING=1
492# options 	RF_INCLUDE_CHAINDECLUSTER=1
493# options 	RF_INCLUDE_INTERDECLUSTER=1
494# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
495# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
496
497pseudo-device	rnd			# /dev/random and in-kernel generator
498#options 	RND_COM			# use "com" randomness as well (BROKEN)
499
500pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
501
502config	netbsd root on ? type ?
503