GENERIC revision 1.211
1# $NetBSD: GENERIC,v 1.211 2005/02/11 08:25:53 dsl Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.30 2005/01/31 16:54:33 hannken Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.211 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options DRACO 41options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47options P5PPC68KBOARD # Phase5 PPC/68K board support 48# 49# processors this kernel should support 50# 51options M68060 # support for 060 52options M060SP # MC68060 software support (Required for 060) 53options M68040 # support for 040 54options FPSP # MC68040 floating point support 55options M68030 # support for 030 56options M68020 # support for 020/851 57options FPU_EMULATE # FPU emulation 58 59# 60# Networking options 61# 62options INET # IP networking support (Required) 63options INET6 # IPV6 64#options IPSEC # IP security 65#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66#options IPSEC_DEBUG # debug for IP security 67#options GATEWAY # Packet forwarding 68#options DIRECTED_BROADCAST # Broadcast across subnets 69 70#options MROUTING # Multicast routing 71#options PIM # Protocol Independent Multicast 72options NS # XNS 73#options NSIP # XNS tunneling over IP 74options ISO,TPIP # OSI 75#options EON # OSI tunneling over IP 76options CCITT,LLC,HDLC # X.25 77options NETATALK # AppleTalk networking protocols 78#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 79 80options PPP_BSDCOMP # BSD-Compress compression support for PPP 81options PPP_DEFLATE # Deflate compression support for PPP 82options PPP_FILTER # Active filter support for PPP (requires bpf) 83options PFIL_HOOKS # pfil(9) packet filter hooks 84options IPFILTER_LOG # ipmon(8) log support 85#options IPFILTER_DEFAULT_BLOCK # block all packets by default 86 87#options ALTQ # Manipulate network interfaces' output queues 88#options ALTQ_BLUE # Stochastic Fair Blue 89#options ALTQ_CBQ # Class-Based Queueing 90#options ALTQ_CDNR # Diffserv Traffic Conditioner 91#options ALTQ_FIFOQ # First-In First-Out Queue 92#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 93#options ALTQ_HFSC # Hierarchical Fair Service Curve 94#options ALTQ_LOCALQ # Local queueing discipline 95#options ALTQ_PRIQ # Priority Queueing 96#options ALTQ_RED # Random Early Detection 97#options ALTQ_RIO # RED with IN/OUT 98#options ALTQ_WFQ # Weighted Fair Queueing 99 100# Filesystems 101file-system FFS # Berkeley fast file system 102file-system EXT2FS # second extended file system (linux) 103#file-system LFS # log-structured filesystem (experimental) 104 105file-system MFS # Memory based filesystem 106 107file-system NFS # Network File System client side code 108file-system ADOSFS # AmigaDOS file system 109file-system CD9660 # ISO 9660 + Rock Ridge filesystem 110file-system MSDOSFS # MS-DOS filesystem 111 112file-system KERNFS # kernel data-structure filesystem 113 114file-system FDESC # user file descriptor filesystem 115file-system NULLFS # loopback filesystem 116file-system OVERLAY # overlay filesystem 117#file-system PORTAL # Portal filesystem 118file-system PROCFS # /proc filesystem 119file-system UMAPFS # NULLFS + uid and gid remapping 120file-system UNION # union filesystem 121 122# Filesystem options 123 124#options FFS_EI # FFS Endian Independant support 125 126options QUOTA # User and group quotas in FFS 127options SOFTDEP # FFS soft updates support. 128#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 129options NFSSERVER # Network File System server side code 130options FFS_SNAPSHOT # ffs snapshots 131 132#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 133 # immutable) behave as system flags. 134 135# 136# Compatibility options for various existing systems 137# 138 139#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 140options COMPAT_43 # compatibility with 4.3BSD interfaces 141options COMPAT_09 # compatibility with NetBSD 0.9 142options COMPAT_10 # compatibility with NetBSD 1.0 143options COMPAT_12 # compatibility with NetBSD 1.2 144options COMPAT_13 # compatibility with NetBSD 1.3 145options COMPAT_14 # compatibility with NetBSD 1.4 146options COMPAT_15 # compatibility with NetBSD 1.5 147options COMPAT_16 # compatibility with NetBSD 1.6 148options COMPAT_SUNOS # Support to run Sun (m68k) executables 149options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 150options COMPAT_NOMID # allow nonvalid machine id executables 151#options COMPAT_LINUX # Support to run Linux/m68k executables 152 153options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 154options COMPAT_AOUT_M68K # actually make some system calls work. 155options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 156 157# 158# Support for System V IPC facilities. 159# 160options SYSVSHM # System V-like shared memory 161options SYSVMSG # System V-like messages 162options SYSVSEM # System V-like semaphores 163#options SEMMNI=10 # number of semaphore identifiers 164#options SEMMNS=60 # number of semaphores in system 165#options SEMUME=10 # max number of undo entries per process 166#options SEMMNU=30 # number of undo structures in system 167options P1003_1B_SEMAPHORE # p1003.1b semaphore support 168 169# 170# Support for various kernel options 171# 172 173options KTRACE # system call tracing support 174options SYSTRACE # system call vetting via systrace(1) 175options LKM # Loadable kernel modules 176#options INSECURE # disable kernel security levels 177options SCSIVERBOSE # human readable SCSI error messages 178options USERCONF # userconf(4) support 179options NTP # NTP phase/frequency locked loop 180#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 181 182# Enable experimental buffer queue strategy for better responsiveness under 183# high disk I/O load. Use it with caution - it's not proven to be stable yet. 184#options NEW_BUFQ_STRATEGY 185 186# 187# Misc. debugging options 188# 189options DDB # Kernel debugger 190#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 191options DIAGNOSTIC # Extra kernel sanity checks 192#options DEBUG # Enable misc. kernel debugging code 193#options SYSCALL_DEBUG # debug all syscalls. 194#options SCSIDEBUG # Add SCSI debugging statements 195#options PANICBUTTON # Forced crash via keypress (?) 196 197# 198# Amiga specific options 199# 200#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 201 # first bank of RAM. (default: unlimited) 202#options NKPTADD=4 # set this for 4 additional KPT pages 203#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 204 # per 16 MB (1<<24 bytes) of RAM 205 # uncomment and decrease this, or uncomment and 206 # increase NKPTADD if you get "out of PT pages" 207 # panics. 208 209# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 210# before the 10 secondinterval ends, or that KBDRESET does work at all. 211#options KBDRESET # sync on Ctrl-Amiga-Amiga 212 213# These options improve performance with the built-in serial port 214# on slower Amigas. Try the larger buffers first then lev6_defer. 215#options SERIBUF_SIZE=4096 216#options SEROBUF_SIZE=32 217#options LEV6_DEFER # defers l6 to l4 (below serial l5) 218 219#options DEVRELOAD # implement /dev/reload 220# # currently only works for a.out kernels 221 222options RETINACONSOLE # enable code to allow retina to be console 223options ULOWELLCONSOLE # enable code to allow a2410 to be console 224options CL5426CONSOLE # Cirrus console 225options CV64CONSOLE # CyberVision console 226options TSENGCONSOLE # Tseng console 227options CV3DCONSOLE # CyberVision 64/3D console 228 229options GRF_ECS # Enhanced Chip Set 230options GRF_NTSC # NTSC 231options GRF_PAL # PAL 232options GRF_A2024 # Support for the A2024 233options GRF_AGA # AGA Chip Set 234options GRF_AGA_VGA # AGA VGAONLY timing 235options GRF_SUPER72 # AGA Super-72 236#options KFONT_8X11 # 8x11 font 237 238# select a font for the console according to the character set and keymap 239# you want to use 240options KFONT_CONS_ISO8859_1 241#options KFONT_CONS_ISO8859_2 242 243# This is how you would tell the kernel the A2410 oscillator frequencies: 244# The used frequencies are the defaults, and do not need option setting 245#options ULOWELL_OSC1=36000000 246#options ULOWELL_OSC2=66667000 247 248# This is how you specify the blitting speed, higher values may speed up blits 249# a littel bit. If you raise this value too much some trash may appear. 250# the commented version is the default. 251#options RH_MEMCLK=61000000 252# this option enables the 64 bit sprite which does not work 253# for quite a few people. E.g. The cursor sprite will turn to a block 254# when moved to the top of the screen in X. 255#options RH_64BIT_SPRITE 256# enables fast scroll code appears to now work on 040 systems. 257#options RETINA_SPEED_HACK 258# enables the Hardwarecursor which does not work on some systems. 259#options RH_HARDWARECURSOR 260 261# wscons aware interface to amiga custom chips. 262# If you enable it enable also wskbd. 263# 264 265#amidisplaycc0 at mainbus0 # wscons interface to custom chips 266#wsdisplay0 at amidisplaycc0 console ? 267#options WSEMUL_VT100 268#options FONT_VT220L8x10 269#options FONT_VT220ISO8x16 270 271grfcc0 at mainbus0 # custom chips 272grfrt0 at zbus0 # retina II 273grfrh0 at zbus0 # retina III 274grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 275grful0 at zbus0 # A2410 276grfcv0 at zbus0 # CyberVision 64 277grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 278grfcv3d0 at zbus0 # CyberVision 64/3D 279 280grf0 at grfcc0 281grf1 at grfrt0 282grf2 at grfrh0 283grf3 at grfcl? 284grf4 at grful0 285grf5 at grfcv0 286grf6 at grfet? 287grf7 at grfcv3d0 288ite0 at grf0 # terminal emulators for grfs 289ite1 at grf1 # terminal emulators for grfs 290ite2 at grf2 # terminal emulators for grfs 291ite3 at grf3 # terminal emulators for grfs 292ite4 at grf4 # terminal emulators for grfs 293ite5 at grf5 # terminal emulators for grfs 294ite6 at grf6 # terminal emulators for grfs 295ite7 at grf7 # terminal emulators for grfs 296 297msc0 at zbus0 # A2232 MSC multiport serial. 298mfc0 at zbus0 # MultiFaceCard I/O board 299mfcs0 at mfc0 unit 0 # MFC serial 300mfcs1 at mfc0 unit 1 # MFC serial 301#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 302#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 303#mfcs2 at mfc1 unit 0 304#mfcs3 at mfc1 unit 1 305#mfcp1 at mfc1 unit 0 306 307hyper* at zbus? # zbus HyperCom3/3+/4/4+ 308#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 309com* at hyper? port ? # Hypercom3/4 serial ports 310lpt* at hyper? port ? # Hypercom3+/4+ parallel port 311 312#options IOBZCLOCK=22118400 # default, uncomment the next line 313#options IOBZCLOCK=24000000 # if needed. 314 315iobl* at zbus? # zbus IOBlix 316com* at iobl? port ? # IOBlix serial ports 317lpt* at iobl? port ? # IOBlix parallel ports 318 319 320# 321# Keyboard device. Optionally can attach a wskbd. 322# wskbd works together with a wsdisplay so enable them both if you will. 323# Don't enable wskbd if you use ite. 324# 325# XXX in std.amiga: kbd0 at mainbus0 326 327#wskbd0 at kbd0 console ? 328 329 330# 331# Amiga Mainboard devices (sans graphics and keyboard) 332# 333 334ser0 at mainbus0 # Amiga onboard serial 335par0 at mainbus0 # Amiga onboard parallel 336ms* at mainbus0 # Amiga mice 337fdc0 at mainbus0 # Amiga FDC 338fd* at fdc0 unit ? # floppy disks on the later 339a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 340a2kbbc0 at mainbus0 # A2000 battery backed clock 341aucc* at mainbus0 # Amiga CC audio 342audio* at aucc? 343 344 345#wsmouse* at ms? 346 347# 348# DraCo Mainboard devices (sans keyboard) 349# 350 351drbbc0 at mainbus0 # DraCo battery backed clock 352drsupio0 at mainbus0 # DraCo superio chip 353com* at drsupio? port ? # DraCo serial 354lpt0 at drsupio? port ? # DraCo parallel 355 356# 357# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 358# 359 360 361repulse* at zbus0 # ALiENDESiGN Repulse 362audio* at repulse? 363 364toccata* at zbus0 # MacroSystem GmbH Toccata 365audio* at toccata? 366 367# Ethernet cards: 368le* at zbus0 # A2065, Ameristar, Ariadne 369ne* at zbus0 # AriadneII, X-surf 370ed* at zbus0 # Hydra, ASDG LanRover 371es* at zbus0 # CEI A4066 EthernetPLUS 372qn* at zbus0 # Quicknet 373 374# Arcnet 375bah* at zbus0 # C=/Ameristar A2060 / 560 376 377# Greater Valley Product Bus 378gvpbus* at zbus0 379 380# scsi stuff, all possible 381gtsc0 at gvpbus? # GVP series II scsi 382scsibus* at gtsc0 383ahsc0 at mainbus0 # A3000 scsi 384scsibus* at ahsc0 385atzsc0 at zbus0 # A2091 scsi 386scsibus* at atzsc0 387wstsc0 at zbus0 # Wordsync II scsi 388scsibus* at wstsc0 389ivsc0 at zbus0 # IVS scsi 390scsibus* at ivsc0 391mlhsc0 at zbus0 # Hacker scsi 392scsibus* at mlhsc0 393otgsc0 at zbus0 # 12 gauge scsi 394scsibus* at otgsc0 395zssc0 at zbus0 # Zeus scsi 396scsibus* at zssc0 397mgnsc0 at zbus0 # Magnum scsi 398scsibus* at mgnsc0 399wesc0 at zbus0 # Warp Engine scsi 400scsibus* at wesc0 401afsc0 at zbus0 # A4091 scsi 402scsibus* at afsc0 403aftsc0 at mainbus0 # A4000T scsi 404scsibus* at aftsc0 405flsc0 at zbus0 # FastlaneZ3 scsi 406scsibus* at flsc0 407bzsc0 at zbus0 # Blizzard 1230 I,II scsi 408scsibus* at bzsc0 409bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 410scsibus* at bzivsc0 411bztzsc0 at zbus0 # Blizzard 2060 scsi 412scsibus* at bztzsc0 413cbsc0 at zbus0 # CyberSCSI I 414scsibus* at cbsc0 415cbiisc0 at zbus0 # CyberSCSI II 416scsibus* at cbiisc0 417cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 418scsibus* at cbiiisc0 419empsc0 at zbus0 # Emplant scsi 420scsibus* at empsc0 421 422wdc0 at mainbus0 # A4000 & A1200 IDE bus 423atabus* at wdc? channel ? # ATA bus 424wd* at atabus? drive ? # + drives 425atapibus* at atabus? # ATAPI bus 426cd* at atapibus? drive ? # ATAPI CD-ROM drives 427sd* at atapibus? drive ? # ATAPI disk drives 428 429pccard0 at mainbus0 430pcmcia* at pccard0 431com* at pcmcia? function ? # Modems and serial cards 432pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 433aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 434wdc* at pcmcia? function ? 435awi* at pcmcia? function ? # BayStack 650 (802.11FH) 436ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 437mbe* at pcmcia? function ? # MB8696x based Ethernet 438ne* at pcmcia? function ? # NE2000-compatible Ethernet 439sm* at pcmcia? function ? # Megahertz Ethernet 440mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 441com* at mhzc? 442sm* at mhzc? 443 444 445drsc0 at mainbus0 # DraCo scsi 446scsibus* at drsc0 447 448 449# each hard drive from low target to high 450# will configure to the next available sd unit number 451sd* at scsibus? target ? lun ? # scsi disks 452st* at scsibus? target ? lun ? # scsi tapes 453cd* at scsibus? target ? lun ? # scsi cds 454ch* at scsibus? target ? lun ? # scsi autochangers 455ss* at scsibus? target ? lun ? # scsi scanner 456uk* at scsibus? target ? lun ? # scsi unknown 457 458pseudo-device loop # loopback network interface 459pseudo-device sl 1 # SLIP network interfaces 460pseudo-device ppp 1 # PPP network interfaces 461pseudo-device pppoe # PPP over Ethernet (RFC 2516) 462pseudo-device tun 1 # network tunnel line discipline 463pseudo-device tap # virtual Ethernet 464#pseudo-device gre 2 # generic L3 over IP tunnel 465pseudo-device bpfilter 16 # Berkeley packet filter 466pseudo-device ipfilter # IP Filter package 467pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 468#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 469#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 470pseudo-device vlan # IEEE 802.1q encapsulation 471pseudo-device bridge # simple inter-network bridging 472#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 473#pseudo-device pf # PF packet filter 474#pseudo-device pflog # PF log if 475pseudo-device fss 4 # file system snapshot device 476 477pseudo-device view 4 # views (needed for grfcc) 478pseudo-device pty # pseudo-terminals 479pseudo-device clockctl # user control of clock subsystem 480 481#pseudo-device wsfont # wsfont(4) dynamic font loading support 482 483pseudo-device vnd 4 # vnode pseudo-disks 484pseudo-device ccd 4 # concatenated disk devices 485#pseudo-device cgd 4 # cryptographic disk devices 486pseudo-device raid 8 # RAIDframe disk driver 487options RAID_AUTOCONFIG # auto-configuration of RAID components 488# Options to enable various other RAIDframe RAID types. 489# options RF_INCLUDE_EVENODD=1 490# options RF_INCLUDE_RAID5_RS=1 491# options RF_INCLUDE_PARITYLOGGING=1 492# options RF_INCLUDE_CHAINDECLUSTER=1 493# options RF_INCLUDE_INTERDECLUSTER=1 494# options RF_INCLUDE_PARITY_DECLUSTERING=1 495# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 496 497pseudo-device rnd # /dev/random and in-kernel generator 498#options RND_COM # use "com" randomness as well (BROKEN) 499 500pseudo-device ksyms # /dev/ksyms (kernel symbols) 501 502config netbsd root on ? type ? 503