GENERIC revision 1.214.2.3.4.1 1 # $NetBSD: GENERIC,v 1.214.2.3.4.1 2007/08/28 13:54:02 ghen Exp $
2 #
3 # This file was automatically created.
4 # Changes will be lost when make is run in this directory.
5 #
6 # Created from: # NetBSD: GENERIC.in,v 1.34.2.3 2005/11/05 00:39:47 tron Exp $
7 #
8 # GENERIC machine description file
9 #
10 # This machine description file is used to generate the default NetBSD
11 # kernel. The generic kernel does not include all options, subsystems
12 # and device drivers, but should be useful for most applications.
13 #
14 # The machine description file can be customised for your specific
15 # machine to reduce the kernel size and improve its performance.
16 #
17 # For further information on compiling NetBSD kernels, see the config(8)
18 # man page.
19 #
20 # For further information on hardware support for this architecture, see
21 # the intro(4) man page. For further information about kernel options
22 # for this architecture, see the options(4) man page. For an explanation
23 # of each device driver in this file see the section 4 man page for the
24 # device.
25
26
27 include "arch/amiga/conf/std.amiga"
28
29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary
30
31 #ident "GENERIC-$Revision: 1.214.2.3.4.1 $"
32
33
34 maxusers 8
35 options RTC_OFFSET=0
36
37 #
38 # mainboards to support (in addition to Amiga)
39 #
40 options DRACO
41 options BB060STUPIDROM # You need this, if you have a non-DraCo
42 # MC68060 with an OS ROM up to (at least)
43 # V40 (OS3.1) and want to boot with the
44 # bootblock.
45 # You do not need this if you have a DraCo,
46 # have no 68060 or NEVER use the bootblock
47 options P5PPC68KBOARD # Phase5 PPC/68K board support
48 #
49 # processors this kernel should support
50 #
51 options M68060 # support for 060
52 options M060SP # MC68060 software support (Required for 060)
53 options M68040 # support for 040
54 options FPSP # MC68040 floating point support
55 options M68030 # support for 030
56 options M68020 # support for 020/851
57 options FPU_EMULATE # FPU emulation
58
59 #
60 # Networking options
61 #
62 options INET # IP networking support (Required)
63 options INET6 # IPV6
64 #options IPSEC # IP security
65 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
66 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
67 #options IPSEC_DEBUG # debug for IP security
68 #options GATEWAY # Packet forwarding
69 #options DIRECTED_BROADCAST # Broadcast across subnets
70
71 #options MROUTING # Multicast routing
72 #options PIM # Protocol Independent Multicast
73 options NS # XNS
74 #options NSIP # XNS tunneling over IP
75 #options ISO,TPIP # OSI
76 #options EON # OSI tunneling over IP
77 options CCITT,LLC,HDLC # X.25
78 options NETATALK # AppleTalk networking protocols
79 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
80
81 options PPP_BSDCOMP # BSD-Compress compression support for PPP
82 options PPP_DEFLATE # Deflate compression support for PPP
83 options PPP_FILTER # Active filter support for PPP (requires bpf)
84 options PFIL_HOOKS # pfil(9) packet filter hooks
85 options IPFILTER_LOG # ipmon(8) log support
86 #options IPFILTER_DEFAULT_BLOCK # block all packets by default
87
88 #options ALTQ # Manipulate network interfaces' output queues
89 #options ALTQ_BLUE # Stochastic Fair Blue
90 #options ALTQ_CBQ # Class-Based Queueing
91 #options ALTQ_CDNR # Diffserv Traffic Conditioner
92 #options ALTQ_FIFOQ # First-In First-Out Queue
93 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
94 #options ALTQ_HFSC # Hierarchical Fair Service Curve
95 #options ALTQ_LOCALQ # Local queueing discipline
96 #options ALTQ_PRIQ # Priority Queueing
97 #options ALTQ_RED # Random Early Detection
98 #options ALTQ_RIO # RED with IN/OUT
99 #options ALTQ_WFQ # Weighted Fair Queueing
100
101 # Filesystems
102 file-system FFS # Berkeley fast file system
103 file-system EXT2FS # second extended file system (linux)
104 #file-system LFS # log-structured filesystem (experimental)
105
106 file-system MFS # Memory based filesystem
107
108 file-system NFS # Network File System client side code
109 file-system ADOSFS # AmigaDOS file system
110 file-system CD9660 # ISO 9660 + Rock Ridge filesystem
111 file-system MSDOSFS # MS-DOS filesystem
112
113 file-system KERNFS # kernel data-structure filesystem
114
115 file-system FDESC # user file descriptor filesystem
116 file-system NULLFS # loopback filesystem
117 file-system OVERLAY # overlay filesystem
118 #file-system PORTAL # Portal filesystem
119 file-system PROCFS # /proc filesystem
120 file-system UMAPFS # NULLFS + uid and gid remapping
121 file-system UNION # union filesystem
122 file-system SMBFS # experimental - CIFS; also needs nsmb (below)
123
124 # Filesystem options
125
126 #options FFS_EI # FFS Endian Independant support
127
128 options QUOTA # User and group quotas in FFS
129 options SOFTDEP # FFS soft updates support.
130 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
131 options NFSSERVER # Network File System server side code
132 #options FFS_NO_SNAPSHOT # ffs snapshots
133
134 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
135 # immutable) behave as system flags.
136
137 #
138 # Compatibility options for various existing systems
139 #
140
141 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
142 options COMPAT_43 # compatibility with 4.3BSD interfaces
143 options COMPAT_09 # compatibility with NetBSD 0.9
144 options COMPAT_10 # compatibility with NetBSD 1.0
145 options COMPAT_12 # compatibility with NetBSD 1.2
146 options COMPAT_13 # compatibility with NetBSD 1.3
147 options COMPAT_14 # compatibility with NetBSD 1.4
148 options COMPAT_15 # compatibility with NetBSD 1.5
149 options COMPAT_16 # compatibility with NetBSD 1.6
150 options COMPAT_20 # compatibility with NetBSD 2.0
151 options COMPAT_SUNOS # Support to run Sun (m68k) executables
152 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables
153 options COMPAT_NOMID # allow nonvalid machine id executables
154 #options COMPAT_LINUX # Support to run Linux/m68k executables
155
156 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x)
157 options COMPAT_AOUT_M68K # actually make some system calls work.
158 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
159
160 #
161 # Support for System V IPC facilities.
162 #
163 options SYSVSHM # System V-like shared memory
164 options SYSVMSG # System V-like messages
165 options SYSVSEM # System V-like semaphores
166 #options SEMMNI=10 # number of semaphore identifiers
167 #options SEMMNS=60 # number of semaphores in system
168 #options SEMUME=10 # max number of undo entries per process
169 #options SEMMNU=30 # number of undo structures in system
170 options P1003_1B_SEMAPHORE # p1003.1b semaphore support
171
172 #
173 # Support for various kernel options
174 #
175
176 options KTRACE # system call tracing support
177 options SYSTRACE # system call vetting via systrace(1)
178 options LKM # Loadable kernel modules
179 #options INSECURE # disable kernel security levels
180 options SCSIVERBOSE # human readable SCSI error messages
181 options USERCONF # userconf(4) support
182 options NTP # NTP phase/frequency locked loop
183 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
184
185 # Enable experimental buffer queue strategy for better responsiveness under
186 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
187 #options NEW_BUFQ_STRATEGY
188
189 #
190 # Misc. debugging options
191 #
192 options DDB # Kernel debugger
193 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
194 #options DIAGNOSTIC # Extra kernel sanity checks
195 #options DEBUG # Enable misc. kernel debugging code
196 #options SYSCALL_DEBUG # debug all syscalls.
197 #options SCSIDEBUG # Add SCSI debugging statements
198 #options PANICBUTTON # Forced crash via keypress (?)
199
200 #
201 # Amiga specific options
202 #
203 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
204 # first bank of RAM. (default: unlimited)
205 #options NKPTADD=4 # set this for 4 additional KPT pages
206 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page
207 # per 16 MB (1<<24 bytes) of RAM
208 # uncomment and decrease this, or uncomment and
209 # increase NKPTADD if you get "out of PT pages"
210 # panics.
211
212 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
213 # before the 10 secondinterval ends, or that KBDRESET does work at all.
214 #options KBDRESET # sync on Ctrl-Amiga-Amiga
215
216 # These options improve performance with the built-in serial port
217 # on slower Amigas. Try the larger buffers first then lev6_defer.
218 #options SERIBUF_SIZE=4096
219 #options SEROBUF_SIZE=32
220 #options LEV6_DEFER # defers l6 to l4 (below serial l5)
221
222 #options DEVRELOAD # implement /dev/reload
223 # # currently only works for a.out kernels
224
225 options RETINACONSOLE # enable code to allow retina to be console
226 options ULOWELLCONSOLE # enable code to allow a2410 to be console
227 options CL5426CONSOLE # Cirrus console
228 options CV64CONSOLE # CyberVision console
229 options TSENGCONSOLE # Tseng console
230 options CV3DCONSOLE # CyberVision 64/3D console
231
232 options GRF_ECS # Enhanced Chip Set
233 options GRF_NTSC # NTSC
234 options GRF_PAL # PAL
235 options GRF_A2024 # Support for the A2024
236 options GRF_AGA # AGA Chip Set
237 options GRF_AGA_VGA # AGA VGAONLY timing
238 options GRF_SUPER72 # AGA Super-72
239 #options KFONT_8X11 # 8x11 font
240
241 # select a font for the console according to the character set and keymap
242 # you want to use
243 options KFONT_CONS_ISO8859_1
244 #options KFONT_CONS_ISO8859_2
245
246 # This is how you would tell the kernel the A2410 oscillator frequencies:
247 # The used frequencies are the defaults, and do not need option setting
248 #options ULOWELL_OSC1=36000000
249 #options ULOWELL_OSC2=66667000
250
251 # This is how you specify the blitting speed, higher values may speed up blits
252 # a littel bit. If you raise this value too much some trash may appear.
253 # the commented version is the default.
254 #options RH_MEMCLK=61000000
255 # this option enables the 64 bit sprite which does not work
256 # for quite a few people. E.g. The cursor sprite will turn to a block
257 # when moved to the top of the screen in X.
258 #options RH_64BIT_SPRITE
259 # enables fast scroll code appears to now work on 040 systems.
260 #options RETINA_SPEED_HACK
261 # enables the Hardwarecursor which does not work on some systems.
262 #options RH_HARDWARECURSOR
263
264 # wscons aware interface to amiga custom chips.
265 # If you enable it enable also wskbd.
266 #
267
268 #amidisplaycc0 at mainbus0 # wscons interface to custom chips
269 #wsdisplay0 at amidisplaycc0 console ?
270 #options WSEMUL_VT100
271 #options FONT_VT220L8x10
272 #options FONT_VT220ISO8x16
273
274 grfcc0 at mainbus0 # custom chips
275 grfrt0 at zbus0 # retina II
276 grfrh0 at zbus0 # retina III
277 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum
278 grful0 at zbus0 # A2410
279 grfcv0 at zbus0 # CyberVision 64
280 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
281 grfcv3d0 at zbus0 # CyberVision 64/3D
282
283 grf0 at grfcc0
284 grf1 at grfrt0
285 grf2 at grfrh0
286 grf3 at grfcl?
287 grf4 at grful0
288 grf5 at grfcv0
289 grf6 at grfet?
290 grf7 at grfcv3d0
291 ite0 at grf0 # terminal emulators for grfs
292 ite1 at grf1 # terminal emulators for grfs
293 ite2 at grf2 # terminal emulators for grfs
294 ite3 at grf3 # terminal emulators for grfs
295 ite4 at grf4 # terminal emulators for grfs
296 ite5 at grf5 # terminal emulators for grfs
297 ite6 at grf6 # terminal emulators for grfs
298 ite7 at grf7 # terminal emulators for grfs
299
300 msc0 at zbus0 # A2232 MSC multiport serial.
301 mfc0 at zbus0 # MultiFaceCard I/O board
302 mfcs0 at mfc0 unit 0 # MFC serial
303 mfcs1 at mfc0 unit 1 # MFC serial
304 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
305 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board
306 #mfcs2 at mfc1 unit 0
307 #mfcs3 at mfc1 unit 1
308 #mfcp1 at mfc1 unit 0
309
310 hyper* at zbus? # zbus HyperCom3/3+/4/4+
311 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
312 com* at hyper? port ? # Hypercom3/4 serial ports
313 lpt* at hyper? port ? # Hypercom3+/4+ parallel port
314
315 #options IOBZCLOCK=22118400 # default, uncomment the next line
316 #options IOBZCLOCK=24000000 # if needed.
317
318 iobl* at zbus? # zbus IOBlix
319 com* at iobl? port ? # IOBlix serial ports
320 lpt* at iobl? port ? # IOBlix parallel ports
321
322
323 #
324 # Keyboard device. Optionally can attach a wskbd.
325 # wskbd works together with a wsdisplay so enable them both if you will.
326 # Don't enable wskbd if you use ite.
327 #
328 # XXX in std.amiga: kbd0 at mainbus0
329
330 #wskbd0 at kbd0 console ?
331
332
333 #
334 # Amiga Mainboard devices (sans graphics and keyboard)
335 #
336
337 ser0 at mainbus0 # Amiga onboard serial
338 par0 at mainbus0 # Amiga onboard parallel
339 ms* at mainbus0 # Amiga mice
340 fdc0 at mainbus0 # Amiga FDC
341 fd* at fdc0 unit ? # floppy disks on the later
342 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
343 a2kbbc0 at mainbus0 # A2000 battery backed clock
344 aucc* at mainbus0 # Amiga CC audio
345 audio* at aucc?
346
347
348 #wsmouse* at ms?
349
350 #
351 # DraCo Mainboard devices (sans keyboard)
352 #
353
354 drbbc0 at mainbus0 # DraCo battery backed clock
355 drsupio0 at mainbus0 # DraCo superio chip
356 com* at drsupio? port ? # DraCo serial
357 lpt0 at drsupio? port ? # DraCo parallel
358
359 #
360 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
361 #
362
363
364 repulse* at zbus0 # ALiENDESiGN Repulse
365 audio* at repulse?
366
367 toccata* at zbus0 # MacroSystem GmbH Toccata
368 audio* at toccata?
369
370 # Ethernet cards:
371 le* at zbus0 # A2065, Ameristar, Ariadne
372 ne* at zbus0 # AriadneII, X-surf
373 ed* at zbus0 # Hydra, ASDG LanRover
374 es* at zbus0 # CEI A4066 EthernetPLUS
375 qn* at zbus0 # Quicknet
376
377 # Arcnet
378 bah* at zbus0 # C=/Ameristar A2060 / 560
379
380 # Greater Valley Product Bus
381 gvpbus* at zbus0
382
383 # scsi stuff, all possible
384 gtsc0 at gvpbus? # GVP series II scsi
385 scsibus* at gtsc0
386 ahsc0 at mainbus0 # A3000 scsi
387 scsibus* at ahsc0
388 atzsc0 at zbus0 # A2091 scsi
389 scsibus* at atzsc0
390 wstsc0 at zbus0 # Wordsync II scsi
391 scsibus* at wstsc0
392 ivsc0 at zbus0 # IVS scsi
393 scsibus* at ivsc0
394 mlhsc0 at zbus0 # Hacker scsi
395 scsibus* at mlhsc0
396 otgsc0 at zbus0 # 12 gauge scsi
397 scsibus* at otgsc0
398 zssc0 at zbus0 # Zeus scsi
399 scsibus* at zssc0
400 mgnsc0 at zbus0 # Magnum scsi
401 scsibus* at mgnsc0
402 wesc0 at zbus0 # Warp Engine scsi
403 scsibus* at wesc0
404 afsc0 at zbus0 # A4091 scsi
405 scsibus* at afsc0
406 aftsc0 at mainbus0 # A4000T scsi
407 scsibus* at aftsc0
408 flsc0 at zbus0 # FastlaneZ3 scsi
409 scsibus* at flsc0
410 bzsc0 at zbus0 # Blizzard 1230 I,II scsi
411 scsibus* at bzsc0
412 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
413 scsibus* at bzivsc0
414 bztzsc0 at zbus0 # Blizzard 2060 scsi
415 scsibus* at bztzsc0
416 cbsc0 at zbus0 # CyberSCSI I
417 scsibus* at cbsc0
418 cbiisc0 at zbus0 # CyberSCSI II
419 scsibus* at cbiisc0
420 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
421 scsibus* at cbiiisc0
422 empsc0 at zbus0 # Emplant scsi
423 scsibus* at empsc0
424
425 wdc0 at mainbus0 # A4000 & A1200 IDE bus
426 atabus* at wdc? channel ? # ATA bus
427 wd* at atabus? drive ? # + drives
428 atapibus* at atabus? # ATAPI bus
429 cd* at atapibus? drive ? # ATAPI CD-ROM drives
430 sd* at atapibus? drive ? # ATAPI disk drives
431
432 pccard0 at mainbus0
433 pcmcia* at pccard0
434 com* at pcmcia? function ? # Modems and serial cards
435 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
436 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
437 wdc* at pcmcia? function ?
438 awi* at pcmcia? function ? # BayStack 650 (802.11FH)
439 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
440 mbe* at pcmcia? function ? # MB8696x based Ethernet
441 ne* at pcmcia? function ? # NE2000-compatible Ethernet
442 sm* at pcmcia? function ? # Megahertz Ethernet
443 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
444 com* at mhzc?
445 sm* at mhzc?
446
447
448 drsc0 at mainbus0 # DraCo scsi
449 scsibus* at drsc0
450
451
452 # each hard drive from low target to high
453 # will configure to the next available sd unit number
454 sd* at scsibus? target ? lun ? # scsi disks
455 st* at scsibus? target ? lun ? # scsi tapes
456 cd* at scsibus? target ? lun ? # scsi cds
457 ch* at scsibus? target ? lun ? # scsi autochangers
458 ss* at scsibus? target ? lun ? # scsi scanner
459 uk* at scsibus? target ? lun ? # scsi unknown
460
461 pseudo-device loop # loopback network interface
462 pseudo-device sl 1 # SLIP network interfaces
463 pseudo-device ppp 1 # PPP network interfaces
464 pseudo-device pppoe # PPP over Ethernet (RFC 2516)
465 pseudo-device tun 1 # network tunnel line discipline
466 pseudo-device tap # virtual Ethernet
467 #pseudo-device gre 2 # generic L3 over IP tunnel
468 pseudo-device bpfilter 16 # Berkeley packet filter
469 pseudo-device ipfilter # IP Filter package
470 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
471 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f
472 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
473 pseudo-device vlan # IEEE 802.1q encapsulation
474 pseudo-device bridge # simple inter-network bridging
475 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
476 #pseudo-device pf # PF packet filter
477 #pseudo-device pflog # PF log if
478 pseudo-device fss 4 # file system snapshot device
479
480 pseudo-device view 4 # views (needed for grfcc)
481 pseudo-device pty # pseudo-terminals
482 pseudo-device clockctl # user control of clock subsystem
483
484 #pseudo-device wsfont # wsfont(4) dynamic font loading support
485
486 pseudo-device vnd 4 # vnode pseudo-disks
487 #options VND_COMPRESSION # compressed vnd(4)
488 pseudo-device ccd 4 # concatenated disk devices
489 #pseudo-device cgd 4 # cryptographic disk devices
490 pseudo-device raid 8 # RAIDframe disk driver
491 options RAID_AUTOCONFIG # auto-configuration of RAID components
492 # Options to enable various other RAIDframe RAID types.
493 # options RF_INCLUDE_EVENODD=1
494 # options RF_INCLUDE_RAID5_RS=1
495 # options RF_INCLUDE_PARITYLOGGING=1
496 # options RF_INCLUDE_CHAINDECLUSTER=1
497 # options RF_INCLUDE_INTERDECLUSTER=1
498 # options RF_INCLUDE_PARITY_DECLUSTERING=1
499 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
500
501 pseudo-device rnd # /dev/random and in-kernel generator
502 #options RND_COM # use "com" randomness as well (BROKEN)
503
504 pseudo-device ksyms # /dev/ksyms (kernel symbols)
505 pseudo-device nsmb # experimental - SMB requester
506
507 config netbsd root on ? type ?
508