GENERIC revision 1.217
1# $NetBSD: GENERIC,v 1.217 2005/06/25 12:05:15 rpaulo Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.36 2005/06/09 14:43:30 tsutsui Exp $
7#
8# GENERIC machine description file
9#
10# This machine description file is used to generate the default NetBSD
11# kernel.  The generic kernel does not include all options, subsystems
12# and device drivers, but should be useful for most applications.
13#
14# The machine description file can be customised for your specific
15# machine to reduce the kernel size and improve its performance.
16#
17# For further information on compiling NetBSD kernels, see the config(8)
18# man page.
19#
20# For further information on hardware support for this architecture, see
21# the intro(4) man page.  For further information about kernel options
22# for this architecture, see the options(4) man page.  For an explanation
23# of each device driver in this file see the section 4 man page for the
24# device.
25
26
27include "arch/amiga/conf/std.amiga"
28
29options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
30
31#ident 		"GENERIC-$Revision: 1.217 $"
32
33
34maxusers	8
35options 	RTC_OFFSET=0
36
37#
38# mainboards to support (in addition to Amiga)
39#
40options 	DRACO
41options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
42				# MC68060 with an OS ROM up to (at least)
43				# V40 (OS3.1) and want to boot with the
44				# bootblock.
45				# You do not need this if you have a DraCo,
46				# have no 68060 or NEVER use the bootblock
47options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
48#
49# processors this kernel should support
50#
51options 	M68060		# support for 060
52options 	M060SP		# MC68060 software support (Required for 060)
53options 	M68040		# support for 040
54options 	FPSP		# MC68040 floating point support
55options 	M68030		# support for 030
56options 	M68020		# support for 020/851
57options 	FPU_EMULATE	# FPU emulation
58
59#
60# Networking options
61#
62options 	INET		# IP networking support (Required)
63options 	INET6		# IPV6
64#options 	IPSEC		# IP security
65#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
66#options 	IPSEC_DEBUG	# debug for IP security
67#options 	GATEWAY		# Packet forwarding
68#options 	DIRECTED_BROADCAST	# Broadcast across subnets
69
70#options 	MROUTING	# Multicast routing
71#options 	PIM		# Protocol Independent Multicast
72options 	NS		# XNS
73#options 	NSIP		# XNS tunneling over IP
74options 	ISO,TPIP	# OSI
75#options 	EON		# OSI tunneling over IP
76options 	CCITT,LLC,HDLC	# X.25
77options 	NETATALK	# AppleTalk networking protocols
78#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
79
80options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
81options 	PPP_DEFLATE	# Deflate compression support for PPP
82options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
83options 	PFIL_HOOKS	# pfil(9) packet filter hooks
84options 	IPFILTER_LOG	# ipmon(8) log support
85#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
86
87#options 	ALTQ		# Manipulate network interfaces' output queues
88#options 	ALTQ_BLUE	# Stochastic Fair Blue
89#options 	ALTQ_CBQ	# Class-Based Queueing
90#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
91#options 	ALTQ_FIFOQ	# First-In First-Out Queue
92#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
93#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
94#options 	ALTQ_LOCALQ	# Local queueing discipline
95#options 	ALTQ_PRIQ	# Priority Queueing
96#options 	ALTQ_RED	# Random Early Detection
97#options 	ALTQ_RIO	# RED with IN/OUT
98#options 	ALTQ_WFQ	# Weighted Fair Queueing
99
100# Filesystems
101file-system 	FFS		# Berkeley fast file system
102file-system 	EXT2FS		# second extended file system (linux)
103#file-system 	LFS		# log-structured filesystem (experimental)
104
105file-system 	MFS		# Memory based filesystem
106
107file-system 	NFS		# Network File System client side code
108file-system 	ADOSFS		# AmigaDOS file system
109file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
110file-system 	MSDOSFS		# MS-DOS filesystem
111
112file-system 	KERNFS		# kernel data-structure filesystem
113
114file-system 	FDESC		# user file descriptor filesystem
115file-system 	NULLFS		# loopback filesystem
116file-system 	OVERLAY		# overlay filesystem
117#file-system 	PORTAL		# Portal filesystem
118file-system 	PROCFS		# /proc filesystem
119file-system 	UMAPFS		# NULLFS + uid and gid remapping
120file-system 	UNION		# union filesystem
121file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)
122#file-system	PTYFS		# experimental - /dev/ptm support
123
124# Filesystem options
125
126#options 	FFS_EI		# FFS Endian Independant support
127
128options 	QUOTA		# User and group quotas in FFS
129options 	SOFTDEP		# FFS soft updates support.
130#options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
131options 	NFSSERVER	# Network File System server side code
132#options 	FFS_NO_SNAPSHOT	# ffs snapshots
133
134#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
135				# immutable) behave as system flags.
136
137#
138# Compatibility options for various existing systems
139#
140
141#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
142options 	COMPAT_43	# compatibility with 4.3BSD interfaces
143options 	COMPAT_09	# compatibility with NetBSD 0.9
144options 	COMPAT_10	# compatibility with NetBSD 1.0
145options 	COMPAT_12	# compatibility with NetBSD 1.2
146options 	COMPAT_13	# compatibility with NetBSD 1.3
147options 	COMPAT_14	# compatibility with NetBSD 1.4
148options 	COMPAT_15	# compatibility with NetBSD 1.5
149options 	COMPAT_16	# compatibility with NetBSD 1.6
150options 	COMPAT_20	# compatibility with NetBSD 2.0
151options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
152options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
153options 	COMPAT_NOMID	# allow nonvalid machine id executables
154#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
155
156options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
157options 	COMPAT_AOUT_M68K # actually make some system calls work.
158options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
159
160#
161# Support for System V IPC facilities.
162#
163options 	SYSVSHM		# System V-like shared memory
164options 	SYSVMSG		# System V-like messages
165options 	SYSVSEM		# System V-like semaphores
166#options 	SEMMNI=10	# number of semaphore identifiers
167#options 	SEMMNS=60	# number of semaphores in system
168#options 	SEMUME=10	# max number of undo entries per process
169#options 	SEMMNU=30	# number of undo structures in system
170options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
171
172#
173# Support for various kernel options
174#
175
176options 	KTRACE		# system call tracing support
177options 	SYSTRACE	# system call vetting via systrace(1)
178options 	LKM		# Loadable kernel modules
179#options 	INSECURE	# disable kernel security levels
180options 	SCSIVERBOSE	# human readable SCSI error messages
181options 	USERCONF	# userconf(4) support
182options 	NTP		# NTP phase/frequency locked loop
183#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
184
185# Enable experimental buffer queue strategy for better responsiveness under 
186# high disk I/O load. Use it with caution - it's not proven to be stable yet.
187#options 	BUFQ_READPRIO
188#options 	BUFQ_PRIOCSCAN
189
190#
191# Misc. debugging options
192#
193options 	DDB		# Kernel debugger
194#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
195options 	DIAGNOSTIC	# Extra kernel sanity checks
196#options 	DEBUG		# Enable misc. kernel debugging code
197#options 	SYSCALL_DEBUG	# debug all syscalls.
198#options 	SCSIDEBUG	# Add SCSI debugging statements
199#options 	PANICBUTTON	# Forced crash via keypress (?)
200
201#
202# Amiga specific options
203#
204#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
205				# first bank of RAM. (default: unlimited)
206#options 	NKPTADD=4	# set this for 4 additional KPT pages
207#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
208				# per 16 MB (1<<24 bytes) of RAM
209				# uncomment and decrease this, or uncomment and
210				# increase NKPTADD if you get "out of PT pages"
211				# panics.
212
213# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
214# before the 10 secondinterval ends, or that KBDRESET does work at all.
215#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
216
217# These options improve performance with the built-in serial port
218# on slower Amigas.  Try the larger buffers first then lev6_defer.
219#options 	SERIBUF_SIZE=4096
220#options 	SEROBUF_SIZE=32
221#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
222
223#options	DEVRELOAD	# implement /dev/reload
224#				# currently only works for a.out kernels
225
226options 	RETINACONSOLE	# enable code to allow retina to be console
227options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
228options 	CL5426CONSOLE	# Cirrus console
229options 	CV64CONSOLE	# CyberVision console
230options 	TSENGCONSOLE	# Tseng console
231options 	CV3DCONSOLE	# CyberVision 64/3D console
232
233options 	GRF_ECS		# Enhanced Chip Set
234options 	GRF_NTSC	# NTSC
235options 	GRF_PAL		# PAL
236options 	GRF_A2024	# Support for the A2024
237options 	GRF_AGA		# AGA Chip Set
238options 	GRF_AGA_VGA	# AGA VGAONLY timing
239options 	GRF_SUPER72	# AGA Super-72
240#options 	KFONT_8X11	# 8x11 font
241
242# select a font for the console according to the character set and keymap
243# you want to use
244options        KFONT_CONS_ISO8859_1
245#options         KFONT_CONS_ISO8859_2
246
247# This is how you would tell the kernel the A2410 oscillator frequencies:
248# The used frequencies are the defaults, and do not need option setting
249#options 	ULOWELL_OSC1=36000000
250#options 	ULOWELL_OSC2=66667000
251
252# This is how you specify the blitting speed, higher values may speed up blits
253# a littel bit.  If you raise this value too much some trash may appear.
254# the commented version is the default.
255#options 	RH_MEMCLK=61000000
256# this option enables the 64 bit sprite which does not work
257# for quite a few people.  E.g. The cursor sprite will turn to a block
258# when moved to the top of the screen in X.
259#options 	RH_64BIT_SPRITE
260# enables fast scroll code appears to now work on 040 systems.
261#options 	RETINA_SPEED_HACK
262# enables the Hardwarecursor which does not work on some systems.
263#options 	RH_HARDWARECURSOR
264
265# wscons aware interface to amiga custom chips.
266# If you enable it enable also wskbd.
267#
268
269#amidisplaycc0	at mainbus0		# wscons interface to custom chips
270#wsdisplay0	at amidisplaycc0 console ?
271#options 	WSEMUL_VT100
272#options 	FONT_VT220L8x10
273#options	FONT_VT220ISO8x16
274
275grfcc0		at mainbus0		# custom chips
276grfrt0		at zbus0		# retina II
277grfrh0		at zbus0		# retina III
278grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
279grful0		at zbus0		# A2410
280grfcv0		at zbus0		# CyberVision 64
281grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
282grfcv3d0	at zbus0		# CyberVision 64/3D
283
284grf0		at grfcc0
285grf1		at grfrt0
286grf2		at grfrh0
287grf3		at grfcl?
288grf4		at grful0
289grf5		at grfcv0
290grf6		at grfet?
291grf7		at grfcv3d0
292ite0		at grf0			# terminal emulators for grfs
293ite1		at grf1			# terminal emulators for grfs
294ite2		at grf2			# terminal emulators for grfs
295ite3		at grf3			# terminal emulators for grfs
296ite4		at grf4			# terminal emulators for grfs
297ite5		at grf5			# terminal emulators for grfs
298ite6		at grf6			# terminal emulators for grfs
299ite7		at grf7			# terminal emulators for grfs
300
301msc0		at zbus0		# A2232 MSC multiport serial.
302mfc0		at zbus0		# MultiFaceCard I/O board
303mfcs0		at mfc0 unit 0		# MFC serial
304mfcs1		at mfc0 unit 1		# MFC serial
305#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
306#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
307#mfcs2		at mfc1 unit 0
308#mfcs3		at mfc1 unit 1
309#mfcp1		at mfc1 unit 0
310
311hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
312#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
313com*		at hyper? port ?	# Hypercom3/4 serial ports
314lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
315
316#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
317#options 	IOBZCLOCK=24000000	# if needed.
318
319iobl*		at zbus?		# zbus IOBlix
320com*		at iobl? port ?		# IOBlix serial ports
321lpt*		at iobl? port ?		# IOBlix parallel ports
322
323
324#
325# Keyboard device. Optionally can attach a wskbd.
326# wskbd works together with a wsdisplay so enable them both if you will.
327# Don't enable wskbd if you use ite.
328#
329# XXX in std.amiga: kbd0 at mainbus0
330
331#wskbd0		at kbd0 console ?
332
333
334#
335# Amiga Mainboard devices (sans graphics and keyboard)
336#
337
338ser0		at mainbus0		# Amiga onboard serial
339par0		at mainbus0		# Amiga onboard parallel
340ms*		at mainbus0		# Amiga mice
341fdc0		at mainbus0		# Amiga FDC
342fd*		at fdc0 unit ?		# floppy disks on the later
343a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
344a2kbbc0 	at mainbus0		# A2000 battery backed clock
345aucc*		at mainbus0		# Amiga CC audio
346audio*		at aucc?
347
348
349#wsmouse*	at ms?
350
351#
352# DraCo Mainboard devices (sans keyboard)
353#
354
355drbbc0		at mainbus0		# DraCo battery backed clock
356drsupio0	at mainbus0		# DraCo superio chip
357com*		at drsupio? port ?	# DraCo serial
358lpt0		at drsupio? port ?	# DraCo parallel
359
360#
361# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
362#
363
364
365repulse*	at zbus0		# ALiENDESiGN Repulse
366audio*		at repulse?
367
368toccata*	at zbus0		# MacroSystem GmbH Toccata
369audio*		at toccata?
370
371# Ethernet cards:
372le*		at zbus0		# A2065, Ameristar, Ariadne
373ne*		at zbus0		# AriadneII, X-surf
374ed*		at zbus0		# Hydra, ASDG LanRover
375es*		at zbus0		# CEI A4066 EthernetPLUS
376qn*		at zbus0		# Quicknet
377
378# Arcnet
379bah*		at zbus0		# C=/Ameristar A2060 / 560
380
381# Greater Valley Product Bus
382gvpbus* 	at zbus0
383
384# scsi stuff, all possible
385gtsc0		at gvpbus?		# GVP series II scsi
386scsibus*	at gtsc0
387ahsc0		at mainbus0		# A3000 scsi
388scsibus*	at ahsc0
389atzsc0		at zbus0		# A2091 scsi
390scsibus*	at atzsc0
391wstsc0		at zbus0		# Wordsync II scsi
392scsibus*	at wstsc0
393ivsc0		at zbus0		# IVS scsi
394scsibus*	at ivsc0
395mlhsc0		at zbus0		# Hacker scsi
396scsibus*	at mlhsc0
397otgsc0		at zbus0		# 12 gauge scsi
398scsibus*	at otgsc0
399zssc0		at zbus0		# Zeus scsi
400scsibus*	at zssc0
401mgnsc0		at zbus0		# Magnum scsi
402scsibus*	at mgnsc0
403wesc0		at zbus0		# Warp Engine scsi
404scsibus*	at wesc0
405afsc0		at zbus0		# A4091 scsi
406scsibus*	at afsc0
407aftsc0		at mainbus0		# A4000T scsi
408scsibus*	at aftsc0
409flsc0		at zbus0		# FastlaneZ3 scsi
410scsibus*	at flsc0
411bzsc0		at zbus0		# Blizzard 1230 I,II scsi
412scsibus*	at bzsc0
413bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
414scsibus*	at bzivsc0
415bztzsc0 	at zbus0		# Blizzard 2060 scsi
416scsibus*	at bztzsc0
417cbsc0		at zbus0		# CyberSCSI I
418scsibus*	at cbsc0
419cbiisc0 	at zbus0		# CyberSCSI II
420scsibus*	at cbiisc0
421cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
422scsibus*	at cbiiisc0
423empsc0		at zbus0		# Emplant scsi
424scsibus*	at empsc0
425
426wdc0		at mainbus0		# A4000 & A1200 IDE bus
427atabus* 	at wdc? channel ?	# ATA bus
428wd*		at atabus? drive ?	#  + drives
429atapibus*	at atabus?		# ATAPI bus
430cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
431sd*		at atapibus? drive ?	# ATAPI disk drives
432
433pccard0		at mainbus0
434pcmcia*		at pccard0
435com*		at pcmcia? function ?		# Modems and serial cards
436pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
437aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
438wdc*		at pcmcia? function ?
439awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
440ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
441mbe*		at pcmcia? function ?		# MB8696x based Ethernet
442ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
443sm*		at pcmcia? function ?		# Megahertz Ethernet
444mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
445com*		at mhzc?
446sm*		at mhzc?
447
448
449drsc0		at mainbus0		# DraCo scsi
450scsibus*	at drsc0
451
452
453# each hard drive from low target to high
454# will configure to the next available sd unit number
455sd*	at scsibus? target ? lun ?	# scsi disks
456st*	at scsibus? target ? lun ?	# scsi tapes
457cd*	at scsibus? target ? lun ?	# scsi cds
458ch*	at scsibus? target ? lun ?	# scsi autochangers
459ss*	at scsibus? target ? lun ?	# scsi scanner
460uk*	at scsibus? target ? lun ?	# scsi unknown
461
462pseudo-device	loop			# loopback network interface
463pseudo-device	sl		1	# SLIP network interfaces
464pseudo-device	ppp		1	# PPP network interfaces
465pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
466pseudo-device	tun		1	# network tunnel line discipline
467pseudo-device	tap			# virtual Ethernet
468#pseudo-device	gre		2	# generic L3 over IP tunnel
469pseudo-device	bpfilter	16	# Berkeley packet filter
470pseudo-device	ipfilter		# IP Filter package
471pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
472#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
473#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
474pseudo-device	vlan			# IEEE 802.1q encapsulation
475pseudo-device	bridge			# simple inter-network bridging
476#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
477#pseudo-device	pf			# PF packet filter
478#pseudo-device	pflog			# PF log if
479pseudo-device	fss		4	# file system snapshot device
480
481pseudo-device	view		4	# views (needed for grfcc)
482pseudo-device	pty			# pseudo-terminals
483pseudo-device	clockctl		# user control of clock subsystem
484
485#pseudo-device	wsfont			# wsfont(4) dynamic font loading support
486#pseudo-device	wsmux			# mouse & keyboard multiplexor
487
488pseudo-device	vnd		4	# vnode pseudo-disks
489pseudo-device	ccd		4	# concatenated disk devices
490#pseudo-device	cgd		4	# cryptographic disk devices
491pseudo-device	raid		8	# RAIDframe disk driver
492options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
493# Options to enable various other RAIDframe RAID types.
494# options 	RF_INCLUDE_EVENODD=1
495# options 	RF_INCLUDE_RAID5_RS=1
496# options 	RF_INCLUDE_PARITYLOGGING=1
497# options 	RF_INCLUDE_CHAINDECLUSTER=1
498# options 	RF_INCLUDE_INTERDECLUSTER=1
499# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
500# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
501
502pseudo-device	rnd			# /dev/random and in-kernel generator
503#options 	RND_COM			# use "com" randomness as well (BROKEN)
504
505pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
506pseudo-device	nsmb			# experimental - SMB requester
507
508config	netbsd root on ? type ?
509