Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.218
      1 # $NetBSD: GENERIC,v 1.218 2005/06/26 12:08:11 rpaulo Exp $
      2 #
      3 # This file was automatically created.
      4 # Changes will be lost when make is run in this directory.
      5 #
      6 # Created from: # NetBSD: GENERIC.in,v 1.36 2005/06/09 14:43:30 tsutsui Exp $
      7 #
      8 # GENERIC machine description file
      9 #
     10 # This machine description file is used to generate the default NetBSD
     11 # kernel.  The generic kernel does not include all options, subsystems
     12 # and device drivers, but should be useful for most applications.
     13 #
     14 # The machine description file can be customised for your specific
     15 # machine to reduce the kernel size and improve its performance.
     16 #
     17 # For further information on compiling NetBSD kernels, see the config(8)
     18 # man page.
     19 #
     20 # For further information on hardware support for this architecture, see
     21 # the intro(4) man page.  For further information about kernel options
     22 # for this architecture, see the options(4) man page.  For an explanation
     23 # of each device driver in this file see the section 4 man page for the
     24 # device.
     25 
     26 
     27 include "arch/amiga/conf/std.amiga"
     28 
     29 options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     30 
     31 #ident 		"GENERIC-$Revision: 1.218 $"
     32 
     33 
     34 maxusers	8
     35 options 	RTC_OFFSET=0
     36 
     37 #
     38 # mainboards to support (in addition to Amiga)
     39 #
     40 options 	DRACO
     41 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     42 				# MC68060 with an OS ROM up to (at least)
     43 				# V40 (OS3.1) and want to boot with the
     44 				# bootblock.
     45 				# You do not need this if you have a DraCo,
     46 				# have no 68060 or NEVER use the bootblock
     47 options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
     48 #
     49 # processors this kernel should support
     50 #
     51 options 	M68060		# support for 060
     52 options 	M060SP		# MC68060 software support (Required for 060)
     53 options 	M68040		# support for 040
     54 options 	FPSP		# MC68040 floating point support
     55 options 	M68030		# support for 030
     56 options 	M68020		# support for 020/851
     57 options 	FPU_EMULATE	# FPU emulation
     58 
     59 #
     60 # Networking options
     61 #
     62 options 	INET		# IP networking support (Required)
     63 options 	INET6		# IPV6
     64 #options 	IPSEC		# IP security
     65 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     66 #options 	IPSEC_DEBUG	# debug for IP security
     67 #options 	GATEWAY		# Packet forwarding
     68 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     69 
     70 #options 	MROUTING	# Multicast routing
     71 #options 	PIM		# Protocol Independent Multicast
     72 options 	NS		# XNS
     73 #options 	NSIP		# XNS tunneling over IP
     74 options 	ISO,TPIP	# OSI
     75 #options 	EON		# OSI tunneling over IP
     76 options 	CCITT,LLC,HDLC	# X.25
     77 options 	NETATALK	# AppleTalk networking protocols
     78 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
     79 
     80 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     81 options 	PPP_DEFLATE	# Deflate compression support for PPP
     82 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     83 options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     84 options 	IPFILTER_LOG	# ipmon(8) log support
     85 #options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
     86 
     87 #options 	ALTQ		# Manipulate network interfaces' output queues
     88 #options 	ALTQ_BLUE	# Stochastic Fair Blue
     89 #options 	ALTQ_CBQ	# Class-Based Queueing
     90 #options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
     91 #options 	ALTQ_FIFOQ	# First-In First-Out Queue
     92 #options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
     93 #options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
     94 #options 	ALTQ_LOCALQ	# Local queueing discipline
     95 #options 	ALTQ_PRIQ	# Priority Queueing
     96 #options 	ALTQ_RED	# Random Early Detection
     97 #options 	ALTQ_RIO	# RED with IN/OUT
     98 #options 	ALTQ_WFQ	# Weighted Fair Queueing
     99 
    100 # Filesystems
    101 file-system 	FFS		# Berkeley fast file system
    102 file-system 	EXT2FS		# second extended file system (linux)
    103 #file-system 	LFS		# log-structured filesystem (experimental)
    104 
    105 file-system 	MFS		# Memory based filesystem
    106 
    107 file-system 	NFS		# Network File System client side code
    108 file-system 	ADOSFS		# AmigaDOS file system
    109 file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
    110 file-system 	MSDOSFS		# MS-DOS filesystem
    111 
    112 file-system 	KERNFS		# kernel data-structure filesystem
    113 
    114 file-system 	FDESC		# user file descriptor filesystem
    115 file-system 	NULLFS		# loopback filesystem
    116 file-system 	OVERLAY		# overlay filesystem
    117 #file-system 	PORTAL		# Portal filesystem
    118 file-system 	PROCFS		# /proc filesystem
    119 file-system 	UMAPFS		# NULLFS + uid and gid remapping
    120 file-system 	UNION		# union filesystem
    121 file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)
    122 #file-system    PTYFS           # experimental - /dev/ptm support
    123 
    124 # Filesystem options
    125 
    126 #options 	FFS_EI		# FFS Endian Independant support
    127 
    128 options 	QUOTA		# User and group quotas in FFS
    129 options 	SOFTDEP		# FFS soft updates support.
    130 #options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
    131 options 	NFSSERVER	# Network File System server side code
    132 #options 	FFS_NO_SNAPSHOT	# ffs snapshots
    133 
    134 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    135 				# immutable) behave as system flags.
    136 
    137 #
    138 # Compatibility options for various existing systems
    139 #
    140 
    141 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
    142 options 	COMPAT_43	# compatibility with 4.3BSD interfaces
    143 options 	COMPAT_09	# compatibility with NetBSD 0.9
    144 options 	COMPAT_10	# compatibility with NetBSD 1.0
    145 options 	COMPAT_12	# compatibility with NetBSD 1.2
    146 options 	COMPAT_13	# compatibility with NetBSD 1.3
    147 options 	COMPAT_14	# compatibility with NetBSD 1.4
    148 options 	COMPAT_15	# compatibility with NetBSD 1.5
    149 options 	COMPAT_16	# compatibility with NetBSD 1.6
    150 options 	COMPAT_20	# compatibility with NetBSD 2.0
    151 options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
    152 options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
    153 options 	COMPAT_NOMID	# allow nonvalid machine id executables
    154 #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
    155 
    156 options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
    157 options 	COMPAT_AOUT_M68K # actually make some system calls work.
    158 options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
    159 
    160 #
    161 # Support for System V IPC facilities.
    162 #
    163 options 	SYSVSHM		# System V-like shared memory
    164 options 	SYSVMSG		# System V-like messages
    165 options 	SYSVSEM		# System V-like semaphores
    166 #options 	SEMMNI=10	# number of semaphore identifiers
    167 #options 	SEMMNS=60	# number of semaphores in system
    168 #options 	SEMUME=10	# max number of undo entries per process
    169 #options 	SEMMNU=30	# number of undo structures in system
    170 options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
    171 
    172 #
    173 # Support for various kernel options
    174 #
    175 
    176 options 	KTRACE		# system call tracing support
    177 options 	SYSTRACE	# system call vetting via systrace(1)
    178 options 	LKM		# Loadable kernel modules
    179 #options 	INSECURE	# disable kernel security levels
    180 options 	SCSIVERBOSE	# human readable SCSI error messages
    181 options 	USERCONF	# userconf(4) support
    182 options 	NTP		# NTP phase/frequency locked loop
    183 #options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
    184 
    185 # Enable experimental buffer queue strategy for better responsiveness under 
    186 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
    187 #options 	BUFQ_READPRIO
    188 #options 	BUFQ_PRIOCSCAN
    189 
    190 #
    191 # Misc. debugging options
    192 #
    193 options 	DDB		# Kernel debugger
    194 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    195 options 	DIAGNOSTIC	# Extra kernel sanity checks
    196 #options 	DEBUG		# Enable misc. kernel debugging code
    197 #options 	SYSCALL_DEBUG	# debug all syscalls.
    198 #options 	SCSIDEBUG	# Add SCSI debugging statements
    199 #options 	PANICBUTTON	# Forced crash via keypress (?)
    200 
    201 #
    202 # Amiga specific options
    203 #
    204 #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    205 				# first bank of RAM. (default: unlimited)
    206 #options 	NKPTADD=4	# set this for 4 additional KPT pages
    207 #options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    208 				# per 16 MB (1<<24 bytes) of RAM
    209 				# uncomment and decrease this, or uncomment and
    210 				# increase NKPTADD if you get "out of PT pages"
    211 				# panics.
    212 
    213 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    214 # before the 10 secondinterval ends, or that KBDRESET does work at all.
    215 #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    216 
    217 # These options improve performance with the built-in serial port
    218 # on slower Amigas.  Try the larger buffers first then lev6_defer.
    219 #options 	SERIBUF_SIZE=4096
    220 #options 	SEROBUF_SIZE=32
    221 #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    222 
    223 #options	DEVRELOAD	# implement /dev/reload
    224 #				# currently only works for a.out kernels
    225 
    226 options 	RETINACONSOLE	# enable code to allow retina to be console
    227 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    228 options 	CL5426CONSOLE	# Cirrus console
    229 options 	CV64CONSOLE	# CyberVision console
    230 options 	TSENGCONSOLE	# Tseng console
    231 options 	CV3DCONSOLE	# CyberVision 64/3D console
    232 
    233 options 	GRF_ECS		# Enhanced Chip Set
    234 options 	GRF_NTSC	# NTSC
    235 options 	GRF_PAL		# PAL
    236 options 	GRF_A2024	# Support for the A2024
    237 options 	GRF_AGA		# AGA Chip Set
    238 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    239 options 	GRF_SUPER72	# AGA Super-72
    240 #options 	KFONT_8X11	# 8x11 font
    241 
    242 # select a font for the console according to the character set and keymap
    243 # you want to use
    244 options        KFONT_CONS_ISO8859_1
    245 #options         KFONT_CONS_ISO8859_2
    246 
    247 # This is how you would tell the kernel the A2410 oscillator frequencies:
    248 # The used frequencies are the defaults, and do not need option setting
    249 #options 	ULOWELL_OSC1=36000000
    250 #options 	ULOWELL_OSC2=66667000
    251 
    252 # This is how you specify the blitting speed, higher values may speed up blits
    253 # a littel bit.  If you raise this value too much some trash may appear.
    254 # the commented version is the default.
    255 #options 	RH_MEMCLK=61000000
    256 # this option enables the 64 bit sprite which does not work
    257 # for quite a few people.  E.g. The cursor sprite will turn to a block
    258 # when moved to the top of the screen in X.
    259 #options 	RH_64BIT_SPRITE
    260 # enables fast scroll code appears to now work on 040 systems.
    261 #options 	RETINA_SPEED_HACK
    262 # enables the Hardwarecursor which does not work on some systems.
    263 #options 	RH_HARDWARECURSOR
    264 
    265 # wscons aware interface to amiga custom chips.
    266 # If you enable it enable also wskbd.
    267 #
    268 
    269 #amidisplaycc0	at mainbus0		# wscons interface to custom chips
    270 #wsdisplay0	at amidisplaycc0 console ?
    271 #options 	WSEMUL_VT100
    272 #options 	FONT_VT220L8x10
    273 #options	FONT_VT220ISO8x16
    274 
    275 grfcc0		at mainbus0		# custom chips
    276 grfrt0		at zbus0		# retina II
    277 grfrh0		at zbus0		# retina III
    278 grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
    279 grful0		at zbus0		# A2410
    280 grfcv0		at zbus0		# CyberVision 64
    281 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    282 grfcv3d0	at zbus0		# CyberVision 64/3D
    283 
    284 grf0		at grfcc0
    285 grf1		at grfrt0
    286 grf2		at grfrh0
    287 grf3		at grfcl?
    288 grf4		at grful0
    289 grf5		at grfcv0
    290 grf6		at grfet?
    291 grf7		at grfcv3d0
    292 ite0		at grf0			# terminal emulators for grfs
    293 ite1		at grf1			# terminal emulators for grfs
    294 ite2		at grf2			# terminal emulators for grfs
    295 ite3		at grf3			# terminal emulators for grfs
    296 ite4		at grf4			# terminal emulators for grfs
    297 ite5		at grf5			# terminal emulators for grfs
    298 ite6		at grf6			# terminal emulators for grfs
    299 ite7		at grf7			# terminal emulators for grfs
    300 
    301 msc0		at zbus0		# A2232 MSC multiport serial.
    302 mfc0		at zbus0		# MultiFaceCard I/O board
    303 mfcs0		at mfc0 unit 0		# MFC serial
    304 mfcs1		at mfc0 unit 1		# MFC serial
    305 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    306 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    307 #mfcs2		at mfc1 unit 0
    308 #mfcs3		at mfc1 unit 1
    309 #mfcp1		at mfc1 unit 0
    310 
    311 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    312 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    313 com*		at hyper? port ?	# Hypercom3/4 serial ports
    314 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    315 
    316 #options 	IOBZCLOCK=22118400 	# default, uncomment the next line
    317 #options 	IOBZCLOCK=24000000	# if needed.
    318 
    319 iobl*		at zbus?		# zbus IOBlix
    320 com*		at iobl? port ?		# IOBlix serial ports
    321 lpt*		at iobl? port ?		# IOBlix parallel ports
    322 
    323 
    324 #
    325 # Keyboard device. Optionally can attach a wskbd.
    326 # wskbd works together with a wsdisplay so enable them both if you will.
    327 # Don't enable wskbd if you use ite.
    328 #
    329 # XXX in std.amiga: kbd0 at mainbus0
    330 
    331 #wskbd0		at kbd0 console ?
    332 
    333 
    334 #
    335 # Amiga Mainboard devices (sans graphics and keyboard)
    336 #
    337 
    338 ser0		at mainbus0		# Amiga onboard serial
    339 par0		at mainbus0		# Amiga onboard parallel
    340 ms*		at mainbus0		# Amiga mice
    341 fdc0		at mainbus0		# Amiga FDC
    342 fd*		at fdc0 unit ?		# floppy disks on the later
    343 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    344 a2kbbc0 	at mainbus0		# A2000 battery backed clock
    345 aucc*		at mainbus0		# Amiga CC audio
    346 audio*		at aucc?
    347 
    348 
    349 #wsmouse*	at ms?
    350 
    351 #
    352 # DraCo Mainboard devices (sans keyboard)
    353 #
    354 
    355 drbbc0		at mainbus0		# DraCo battery backed clock
    356 drsupio0	at mainbus0		# DraCo superio chip
    357 com*		at drsupio? port ?	# DraCo serial
    358 lpt0		at drsupio? port ?	# DraCo parallel
    359 
    360 #
    361 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    362 #
    363 
    364 
    365 repulse*	at zbus0		# ALiENDESiGN Repulse
    366 audio*		at repulse?
    367 
    368 toccata*	at zbus0		# MacroSystem GmbH Toccata
    369 audio*		at toccata?
    370 
    371 # Ethernet cards:
    372 le*		at zbus0		# A2065, Ameristar, Ariadne
    373 ne*		at zbus0		# AriadneII, X-surf
    374 ed*		at zbus0		# Hydra, ASDG LanRover
    375 es*		at zbus0		# CEI A4066 EthernetPLUS
    376 qn*		at zbus0		# Quicknet
    377 
    378 # Arcnet
    379 bah*		at zbus0		# C=/Ameristar A2060 / 560
    380 
    381 # Greater Valley Product Bus
    382 gvpbus* 	at zbus0
    383 
    384 # scsi stuff, all possible
    385 gtsc0		at gvpbus?		# GVP series II scsi
    386 scsibus*	at gtsc0
    387 ahsc0		at mainbus0		# A3000 scsi
    388 scsibus*	at ahsc0
    389 atzsc0		at zbus0		# A2091 scsi
    390 scsibus*	at atzsc0
    391 wstsc0		at zbus0		# Wordsync II scsi
    392 scsibus*	at wstsc0
    393 ivsc0		at zbus0		# IVS scsi
    394 scsibus*	at ivsc0
    395 mlhsc0		at zbus0		# Hacker scsi
    396 scsibus*	at mlhsc0
    397 otgsc0		at zbus0		# 12 gauge scsi
    398 scsibus*	at otgsc0
    399 zssc0		at zbus0		# Zeus scsi
    400 scsibus*	at zssc0
    401 mgnsc0		at zbus0		# Magnum scsi
    402 scsibus*	at mgnsc0
    403 wesc0		at zbus0		# Warp Engine scsi
    404 scsibus*	at wesc0
    405 afsc0		at zbus0		# A4091 scsi
    406 scsibus*	at afsc0
    407 aftsc0		at mainbus0		# A4000T scsi
    408 scsibus*	at aftsc0
    409 flsc0		at zbus0		# FastlaneZ3 scsi
    410 scsibus*	at flsc0
    411 bzsc0		at zbus0		# Blizzard 1230 I,II scsi
    412 scsibus*	at bzsc0
    413 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
    414 scsibus*	at bzivsc0
    415 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    416 scsibus*	at bztzsc0
    417 cbsc0		at zbus0		# CyberSCSI I
    418 scsibus*	at cbsc0
    419 cbiisc0 	at zbus0		# CyberSCSI II
    420 scsibus*	at cbiisc0
    421 cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    422 scsibus*	at cbiiisc0
    423 empsc0		at zbus0		# Emplant scsi
    424 scsibus*	at empsc0
    425 
    426 wdc0		at mainbus0		# A4000 & A1200 IDE bus
    427 atabus* 	at wdc? channel ?	# ATA bus
    428 wd*		at atabus? drive ?	#  + drives
    429 atapibus*	at atabus?		# ATAPI bus
    430 cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    431 sd*		at atapibus? drive ?	# ATAPI disk drives
    432 
    433 pccard0		at mainbus0
    434 pcmcia*		at pccard0
    435 com*		at pcmcia? function ?		# Modems and serial cards
    436 pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
    437 aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
    438 wdc*		at pcmcia? function ?
    439 awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
    440 ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    441 mbe*		at pcmcia? function ?		# MB8696x based Ethernet
    442 ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
    443 sm*		at pcmcia? function ?		# Megahertz Ethernet
    444 mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
    445 com*		at mhzc?
    446 sm*		at mhzc?
    447 
    448 
    449 drsc0		at mainbus0		# DraCo scsi
    450 scsibus*	at drsc0
    451 
    452 
    453 # each hard drive from low target to high
    454 # will configure to the next available sd unit number
    455 sd*	at scsibus? target ? lun ?	# scsi disks
    456 st*	at scsibus? target ? lun ?	# scsi tapes
    457 cd*	at scsibus? target ? lun ?	# scsi cds
    458 ch*	at scsibus? target ? lun ?	# scsi autochangers
    459 ss*	at scsibus? target ? lun ?	# scsi scanner
    460 uk*	at scsibus? target ? lun ?	# scsi unknown
    461 
    462 pseudo-device	loop			# loopback network interface
    463 pseudo-device	sl		1	# SLIP network interfaces
    464 pseudo-device	ppp		1	# PPP network interfaces
    465 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    466 pseudo-device	tun		1	# network tunnel line discipline
    467 pseudo-device	tap			# virtual Ethernet
    468 #pseudo-device	gre		2	# generic L3 over IP tunnel
    469 pseudo-device	bpfilter	16	# Berkeley packet filter
    470 pseudo-device	ipfilter		# IP Filter package
    471 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    472 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    473 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    474 pseudo-device	vlan			# IEEE 802.1q encapsulation
    475 pseudo-device	bridge			# simple inter-network bridging
    476 #options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
    477 #pseudo-device	pf			# PF packet filter
    478 #pseudo-device	pflog			# PF log if
    479 pseudo-device	fss		4	# file system snapshot device
    480 
    481 pseudo-device	view		4	# views (needed for grfcc)
    482 pseudo-device	pty			# pseudo-terminals
    483 pseudo-device	clockctl		# user control of clock subsystem
    484 
    485 #pseudo-device	wsfont			# wsfont(4) dynamic font loading support
    486 #pseudo-device	wsmux			# mouse & keyboard multiplexor
    487 
    488 pseudo-device	vnd		4	# vnode pseudo-disks
    489 pseudo-device	ccd		4	# concatenated disk devices
    490 #pseudo-device	cgd		4	# cryptographic disk devices
    491 pseudo-device	raid		8	# RAIDframe disk driver
    492 options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    493 # Options to enable various other RAIDframe RAID types.
    494 # options 	RF_INCLUDE_EVENODD=1
    495 # options 	RF_INCLUDE_RAID5_RS=1
    496 # options 	RF_INCLUDE_PARITYLOGGING=1
    497 # options 	RF_INCLUDE_CHAINDECLUSTER=1
    498 # options 	RF_INCLUDE_INTERDECLUSTER=1
    499 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    500 # options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    501 
    502 pseudo-device	rnd			# /dev/random and in-kernel generator
    503 #options 	RND_COM			# use "com" randomness as well (BROKEN)
    504 
    505 pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
    506 pseudo-device	nsmb			# experimental - SMB requester
    507 
    508 config	netbsd root on ? type ?
    509