GENERIC revision 1.225
1 # $NetBSD: GENERIC,v 1.225 2005/08/19 05:19:49 christos Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.41 2005/07/31 04:04:31 yamt Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.225 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options DRACO 41 options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47 options P5PPC68KBOARD # Phase5 PPC/68K board support 48 # 49 # processors this kernel should support 50 # 51 options M68060 # support for 060 52 options M060SP # MC68060 software support (Required for 060) 53 options M68040 # support for 040 54 options FPSP # MC68040 floating point support 55 options M68030 # support for 030 56 options M68020 # support for 020/851 57 options FPU_EMULATE # FPU emulation 58 59 # 60 # Networking options 61 # 62 options INET # IP networking support (Required) 63 options INET6 # IPV6 64 #options IPSEC # IP security 65 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 67 #options IPSEC_DEBUG # debug for IP security 68 #options GATEWAY # Packet forwarding 69 #options DIRECTED_BROADCAST # Broadcast across subnets 70 71 #options MROUTING # Multicast routing 72 #options PIM # Protocol Independent Multicast 73 options NS # XNS 74 #options NSIP # XNS tunneling over IP 75 options ISO,TPIP # OSI 76 #options EON # OSI tunneling over IP 77 options CCITT,LLC,HDLC # X.25 78 options NETATALK # AppleTalk networking protocols 79 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 80 81 options PPP_BSDCOMP # BSD-Compress compression support for PPP 82 options PPP_DEFLATE # Deflate compression support for PPP 83 options PPP_FILTER # Active filter support for PPP (requires bpf) 84 options PFIL_HOOKS # pfil(9) packet filter hooks 85 options IPFILTER_LOG # ipmon(8) log support 86 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 87 88 #options ALTQ # Manipulate network interfaces' output queues 89 #options ALTQ_BLUE # Stochastic Fair Blue 90 #options ALTQ_CBQ # Class-Based Queueing 91 #options ALTQ_CDNR # Diffserv Traffic Conditioner 92 #options ALTQ_FIFOQ # First-In First-Out Queue 93 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 94 #options ALTQ_HFSC # Hierarchical Fair Service Curve 95 #options ALTQ_LOCALQ # Local queueing discipline 96 #options ALTQ_PRIQ # Priority Queueing 97 #options ALTQ_RED # Random Early Detection 98 #options ALTQ_RIO # RED with IN/OUT 99 #options ALTQ_WFQ # Weighted Fair Queueing 100 101 # Filesystems 102 file-system FFS # Berkeley fast file system 103 file-system EXT2FS # second extended file system (linux) 104 #file-system LFS # log-structured filesystem (experimental) 105 106 file-system MFS # Memory based filesystem 107 108 file-system NFS # Network File System client side code 109 file-system ADOSFS # AmigaDOS file system 110 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 111 file-system MSDOSFS # MS-DOS filesystem 112 113 file-system KERNFS # kernel data-structure filesystem 114 115 file-system FDESC # user file descriptor filesystem 116 file-system NULLFS # loopback filesystem 117 file-system OVERLAY # overlay filesystem 118 #file-system PORTAL # Portal filesystem 119 file-system PROCFS # /proc filesystem 120 file-system UMAPFS # NULLFS + uid and gid remapping 121 file-system UNION # union filesystem 122 file-system SMBFS # experimental - CIFS; also needs nsmb (below) 123 file-system PTYFS # /dev/pts/N support 124 125 # Filesystem options 126 127 #options FFS_EI # FFS Endian Independant support 128 129 options QUOTA # User and group quotas in FFS 130 options SOFTDEP # FFS soft updates support. 131 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 132 options NFSSERVER # Network File System server side code 133 #options FFS_NO_SNAPSHOT # ffs snapshots 134 135 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 136 # immutable) behave as system flags. 137 138 # 139 # Compatibility options for various existing systems 140 # 141 142 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 143 options COMPAT_43 # compatibility with 4.3BSD interfaces 144 options COMPAT_09 # compatibility with NetBSD 0.9 145 options COMPAT_10 # compatibility with NetBSD 1.0 146 options COMPAT_12 # compatibility with NetBSD 1.2 147 options COMPAT_13 # compatibility with NetBSD 1.3 148 options COMPAT_14 # compatibility with NetBSD 1.4 149 options COMPAT_15 # compatibility with NetBSD 1.5 150 options COMPAT_16 # compatibility with NetBSD 1.6 151 options COMPAT_20 # compatibility with NetBSD 2.0 152 options COMPAT_30 # NetBSD 3.0 compatibility. 153 options COMPAT_SUNOS # Support to run Sun (m68k) executables 154 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 155 options COMPAT_NOMID # allow nonvalid machine id executables 156 #options COMPAT_LINUX # Support to run Linux/m68k executables 157 158 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 159 options COMPAT_AOUT_M68K # actually make some system calls work. 160 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 161 162 # 163 # Support for System V IPC facilities. 164 # 165 options SYSVSHM # System V-like shared memory 166 options SYSVMSG # System V-like messages 167 options SYSVSEM # System V-like semaphores 168 #options SEMMNI=10 # number of semaphore identifiers 169 #options SEMMNS=60 # number of semaphores in system 170 #options SEMUME=10 # max number of undo entries per process 171 #options SEMMNU=30 # number of undo structures in system 172 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 173 174 # 175 # Support for various kernel options 176 # 177 178 options KTRACE # system call tracing support 179 options SYSTRACE # system call vetting via systrace(1) 180 options LKM # Loadable kernel modules 181 #options INSECURE # disable kernel security levels 182 options SCSIVERBOSE # human readable SCSI error messages 183 options USERCONF # userconf(4) support 184 options NTP # NTP phase/frequency locked loop 185 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 186 187 # Enable experimental buffer queue strategy for better responsiveness under 188 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 189 #options BUFQ_READPRIO 190 #options BUFQ_PRIOCSCAN 191 192 # 193 # Misc. debugging options 194 # 195 options DDB # Kernel debugger 196 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 197 options DIAGNOSTIC # Extra kernel sanity checks 198 #options DEBUG # Enable misc. kernel debugging code 199 #options SYSCALL_DEBUG # debug all syscalls. 200 #options SCSIDEBUG # Add SCSI debugging statements 201 #options PANICBUTTON # Forced crash via keypress (?) 202 203 # 204 # Amiga specific options 205 # 206 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 207 # first bank of RAM. (default: unlimited) 208 #options NKPTADD=4 # set this for 4 additional KPT pages 209 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 210 # per 16 MB (1<<24 bytes) of RAM 211 # uncomment and decrease this, or uncomment and 212 # increase NKPTADD if you get "out of PT pages" 213 # panics. 214 215 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 216 # before the 10 secondinterval ends, or that KBDRESET does work at all. 217 #options KBDRESET # sync on Ctrl-Amiga-Amiga 218 219 # These options improve performance with the built-in serial port 220 # on slower Amigas. Try the larger buffers first then lev6_defer. 221 #options SERIBUF_SIZE=4096 222 #options SEROBUF_SIZE=32 223 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 224 225 #options DEVRELOAD # implement /dev/reload 226 # # currently only works for a.out kernels 227 228 options RETINACONSOLE # enable code to allow retina to be console 229 options ULOWELLCONSOLE # enable code to allow a2410 to be console 230 options CL5426CONSOLE # Cirrus console 231 options CV64CONSOLE # CyberVision console 232 options TSENGCONSOLE # Tseng console 233 options CV3DCONSOLE # CyberVision 64/3D console 234 235 options GRF_ECS # Enhanced Chip Set 236 options GRF_NTSC # NTSC 237 options GRF_PAL # PAL 238 options GRF_A2024 # Support for the A2024 239 options GRF_AGA # AGA Chip Set 240 options GRF_AGA_VGA # AGA VGAONLY timing 241 options GRF_SUPER72 # AGA Super-72 242 #options KFONT_8X11 # 8x11 font 243 244 # select a font for the console according to the character set and keymap 245 # you want to use 246 options KFONT_CONS_ISO8859_1 247 #options KFONT_CONS_ISO8859_2 248 249 # This is how you would tell the kernel the A2410 oscillator frequencies: 250 # The used frequencies are the defaults, and do not need option setting 251 #options ULOWELL_OSC1=36000000 252 #options ULOWELL_OSC2=66667000 253 254 # This is how you specify the blitting speed, higher values may speed up blits 255 # a littel bit. If you raise this value too much some trash may appear. 256 # the commented version is the default. 257 #options RH_MEMCLK=61000000 258 # this option enables the 64 bit sprite which does not work 259 # for quite a few people. E.g. The cursor sprite will turn to a block 260 # when moved to the top of the screen in X. 261 #options RH_64BIT_SPRITE 262 # enables fast scroll code appears to now work on 040 systems. 263 #options RETINA_SPEED_HACK 264 # enables the Hardwarecursor which does not work on some systems. 265 #options RH_HARDWARECURSOR 266 267 # wscons aware interface to amiga custom chips. 268 # If you enable it enable also wskbd. 269 # 270 271 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 272 #wsdisplay0 at amidisplaycc0 console ? 273 #options WSEMUL_VT100 274 #options FONT_VT220L8x10 275 #options FONT_VT220ISO8x16 276 277 grfcc0 at mainbus0 # custom chips 278 grfrt0 at zbus0 # retina II 279 grfrh0 at zbus0 # retina III 280 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 281 grful0 at zbus0 # A2410 282 grfcv0 at zbus0 # CyberVision 64 283 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 284 grfcv3d0 at zbus0 # CyberVision 64/3D 285 286 grf0 at grfcc0 287 grf1 at grfrt0 288 grf2 at grfrh0 289 grf3 at grfcl? 290 grf4 at grful0 291 grf5 at grfcv0 292 grf6 at grfet? 293 grf7 at grfcv3d0 294 ite0 at grf0 # terminal emulators for grfs 295 ite1 at grf1 # terminal emulators for grfs 296 ite2 at grf2 # terminal emulators for grfs 297 ite3 at grf3 # terminal emulators for grfs 298 ite4 at grf4 # terminal emulators for grfs 299 ite5 at grf5 # terminal emulators for grfs 300 ite6 at grf6 # terminal emulators for grfs 301 ite7 at grf7 # terminal emulators for grfs 302 303 msc0 at zbus0 # A2232 MSC multiport serial. 304 mfc0 at zbus0 # MultiFaceCard I/O board 305 mfcs0 at mfc0 unit 0 # MFC serial 306 mfcs1 at mfc0 unit 1 # MFC serial 307 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 308 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 309 #mfcs2 at mfc1 unit 0 310 #mfcs3 at mfc1 unit 1 311 #mfcp1 at mfc1 unit 0 312 313 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 314 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 315 com* at hyper? port ? # Hypercom3/4 serial ports 316 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 317 318 #options IOBZCLOCK=22118400 # default, uncomment the next line 319 #options IOBZCLOCK=24000000 # if needed. 320 321 iobl* at zbus? # zbus IOBlix 322 com* at iobl? port ? # IOBlix serial ports 323 lpt* at iobl? port ? # IOBlix parallel ports 324 325 326 # 327 # Keyboard device. Optionally can attach a wskbd. 328 # wskbd works together with a wsdisplay so enable them both if you will. 329 # Don't enable wskbd if you use ite. 330 # 331 # XXX in std.amiga: kbd0 at mainbus0 332 333 #wskbd0 at kbd0 console ? 334 335 336 # 337 # Amiga Mainboard devices (sans graphics and keyboard) 338 # 339 340 ser0 at mainbus0 # Amiga onboard serial 341 par0 at mainbus0 # Amiga onboard parallel 342 ms* at mainbus0 # Amiga mice 343 fdc0 at mainbus0 # Amiga FDC 344 fd* at fdc0 unit ? # floppy disks on the later 345 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 346 a2kbbc0 at mainbus0 # A2000 battery backed clock 347 aucc* at mainbus0 # Amiga CC audio 348 audio* at aucc? 349 350 351 #wsmouse* at ms? 352 353 # 354 # DraCo Mainboard devices (sans keyboard) 355 # 356 357 drbbc0 at mainbus0 # DraCo battery backed clock 358 drsupio0 at mainbus0 # DraCo superio chip 359 com* at drsupio? port ? # DraCo serial 360 lpt0 at drsupio? port ? # DraCo parallel 361 362 # 363 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 364 # 365 366 367 repulse* at zbus0 # ALiENDESiGN Repulse 368 audio* at repulse? 369 370 toccata* at zbus0 # MacroSystem GmbH Toccata 371 audio* at toccata? 372 373 # Ethernet cards: 374 le* at zbus0 # A2065, Ameristar, Ariadne 375 ne* at zbus0 # AriadneII, X-surf 376 ed* at zbus0 # Hydra, ASDG LanRover 377 es* at zbus0 # CEI A4066 EthernetPLUS 378 qn* at zbus0 # Quicknet 379 380 # Arcnet 381 bah* at zbus0 # C=/Ameristar A2060 / 560 382 383 # Greater Valley Product Bus 384 gvpbus* at zbus0 385 386 # scsi stuff, all possible 387 gtsc0 at gvpbus? # GVP series II scsi 388 scsibus* at gtsc0 389 ahsc0 at mainbus0 # A3000 scsi 390 scsibus* at ahsc0 391 atzsc0 at zbus0 # A2091 scsi 392 scsibus* at atzsc0 393 wstsc0 at zbus0 # Wordsync II scsi 394 scsibus* at wstsc0 395 ivsc0 at zbus0 # IVS scsi 396 scsibus* at ivsc0 397 mlhsc0 at zbus0 # Hacker scsi 398 scsibus* at mlhsc0 399 otgsc0 at zbus0 # 12 gauge scsi 400 scsibus* at otgsc0 401 zssc0 at zbus0 # Zeus scsi 402 scsibus* at zssc0 403 mgnsc0 at zbus0 # Magnum scsi 404 scsibus* at mgnsc0 405 wesc0 at zbus0 # Warp Engine scsi 406 scsibus* at wesc0 407 afsc0 at zbus0 # A4091 scsi 408 scsibus* at afsc0 409 aftsc0 at mainbus0 # A4000T scsi 410 scsibus* at aftsc0 411 flsc0 at zbus0 # FastlaneZ3 scsi 412 scsibus* at flsc0 413 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 414 scsibus* at bzsc0 415 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 416 scsibus* at bzivsc0 417 bztzsc0 at zbus0 # Blizzard 2060 scsi 418 scsibus* at bztzsc0 419 cbsc0 at zbus0 # CyberSCSI I 420 scsibus* at cbsc0 421 cbiisc0 at zbus0 # CyberSCSI II 422 scsibus* at cbiisc0 423 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 424 scsibus* at cbiiisc0 425 empsc0 at zbus0 # Emplant scsi 426 scsibus* at empsc0 427 428 wdc0 at mainbus0 # A4000 & A1200 IDE bus 429 atabus* at wdc? channel ? # ATA bus 430 wd* at atabus? drive ? # + drives 431 atapibus* at atabus? # ATAPI bus 432 cd* at atapibus? drive ? # ATAPI CD-ROM drives 433 sd* at atapibus? drive ? # ATAPI disk drives 434 435 pccard0 at mainbus0 436 pcmcia* at pccard0 437 com* at pcmcia? function ? # Modems and serial cards 438 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 439 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 440 wdc* at pcmcia? function ? 441 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 442 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 443 mbe* at pcmcia? function ? # MB8696x based Ethernet 444 ne* at pcmcia? function ? # NE2000-compatible Ethernet 445 sm* at pcmcia? function ? # Megahertz Ethernet 446 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 447 com* at mhzc? 448 sm* at mhzc? 449 450 451 drsc0 at mainbus0 # DraCo scsi 452 scsibus* at drsc0 453 454 455 # each hard drive from low target to high 456 # will configure to the next available sd unit number 457 sd* at scsibus? target ? lun ? # scsi disks 458 st* at scsibus? target ? lun ? # scsi tapes 459 cd* at scsibus? target ? lun ? # scsi cds 460 ch* at scsibus? target ? lun ? # scsi autochangers 461 ss* at scsibus? target ? lun ? # scsi scanner 462 uk* at scsibus? target ? lun ? # scsi unknown 463 464 pseudo-device loop # loopback network interface 465 pseudo-device sl 1 # SLIP network interfaces 466 pseudo-device ppp 1 # PPP network interfaces 467 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 468 pseudo-device tun 1 # network tunnel line discipline 469 pseudo-device tap # virtual Ethernet 470 #pseudo-device gre 2 # generic L3 over IP tunnel 471 pseudo-device bpfilter 16 # Berkeley packet filter 472 pseudo-device ipfilter # IP Filter package 473 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 474 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 475 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 476 pseudo-device vlan # IEEE 802.1q encapsulation 477 pseudo-device bridge # simple inter-network bridging 478 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 479 #pseudo-device pf # PF packet filter 480 #pseudo-device pflog # PF log if 481 pseudo-device fss 4 # file system snapshot device 482 483 pseudo-device view 4 # views (needed for grfcc) 484 pseudo-device pty # pseudo-terminals 485 pseudo-device clockctl # user control of clock subsystem 486 487 #pseudo-device wsfont # wsfont(4) dynamic font loading support 488 #pseudo-device wsmux # mouse & keyboard multiplexor 489 490 pseudo-device vnd 4 # vnode pseudo-disks 491 #options VND_COMPRESSION # compressed vnd(4) 492 pseudo-device ccd 4 # concatenated disk devices 493 #pseudo-device cgd 4 # cryptographic disk devices 494 pseudo-device raid 8 # RAIDframe disk driver 495 options RAID_AUTOCONFIG # auto-configuration of RAID components 496 # Options to enable various other RAIDframe RAID types. 497 # options RF_INCLUDE_EVENODD=1 498 # options RF_INCLUDE_RAID5_RS=1 499 # options RF_INCLUDE_PARITYLOGGING=1 500 # options RF_INCLUDE_CHAINDECLUSTER=1 501 # options RF_INCLUDE_INTERDECLUSTER=1 502 # options RF_INCLUDE_PARITY_DECLUSTERING=1 503 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 504 505 pseudo-device rnd # /dev/random and in-kernel generator 506 #options RND_COM # use "com" randomness as well (BROKEN) 507 508 pseudo-device ksyms # /dev/ksyms (kernel symbols) 509 pseudo-device nsmb # experimental - SMB requester 510 511 config netbsd root on ? type ? 512
Indexes created Thu Oct 02 14:10:14 GMT 2025