GENERIC revision 1.233
1# $NetBSD: GENERIC,v 1.233 2006/02/02 21:32:08 reinoud Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.48 2005/12/10 14:53:10 tsutsui Exp $
7#
8# GENERIC machine description file
9#
10# This machine description file is used to generate the default NetBSD
11# kernel.  The generic kernel does not include all options, subsystems
12# and device drivers, but should be useful for most applications.
13#
14# The machine description file can be customised for your specific
15# machine to reduce the kernel size and improve its performance.
16#
17# For further information on compiling NetBSD kernels, see the config(8)
18# man page.
19#
20# For further information on hardware support for this architecture, see
21# the intro(4) man page.  For further information about kernel options
22# for this architecture, see the options(4) man page.  For an explanation
23# of each device driver in this file see the section 4 man page for the
24# device.
25
26
27include "arch/amiga/conf/std.amiga"
28
29options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
30
31#ident 		"GENERIC-$Revision: 1.233 $"
32
33
34maxusers	8
35options 	RTC_OFFSET=0
36
37#
38# mainboards to support (in addition to Amiga)
39#
40options 	DRACO
41options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
42				# MC68060 with an OS ROM up to (at least)
43				# V40 (OS3.1) and want to boot with the
44				# bootblock.
45				# You do not need this if you have a DraCo,
46				# have no 68060 or NEVER use the bootblock
47options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
48#
49# processors this kernel should support
50#
51options 	M68060		# support for 060
52options 	M060SP		# MC68060 software support (Required for 060)
53options 	M68040		# support for 040
54options 	FPSP		# MC68040 floating point support
55options 	M68030		# support for 030
56options 	M68020		# support for 020/851
57options 	FPU_EMULATE	# FPU emulation
58
59#
60# Networking options
61#
62options 	INET		# IP networking support (Required)
63options 	INET6		# IPV6
64#options 	IPSEC		# IP security
65#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
66#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
67#options 	IPSEC_DEBUG	# debug for IP security
68#options 	GATEWAY		# Packet forwarding
69#options 	DIRECTED_BROADCAST	# Broadcast across subnets
70
71#options 	MROUTING	# Multicast routing
72#options 	PIM		# Protocol Independent Multicast
73options 	NS		# XNS
74#options 	NSIP		# XNS tunneling over IP
75options 	ISO,TPIP	# OSI
76#options 	EON		# OSI tunneling over IP
77options 	CCITT,LLC,HDLC	# X.25
78options 	NETATALK	# AppleTalk networking protocols
79#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
80
81options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
82options 	PPP_DEFLATE	# Deflate compression support for PPP
83options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
84options 	PFIL_HOOKS	# pfil(9) packet filter hooks
85options 	IPFILTER_LOG	# ipmon(8) log support
86#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
87
88#options 	ALTQ		# Manipulate network interfaces' output queues
89#options 	ALTQ_BLUE	# Stochastic Fair Blue
90#options 	ALTQ_CBQ	# Class-Based Queueing
91#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
92#options 	ALTQ_FIFOQ	# First-In First-Out Queue
93#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
94#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
95#options 	ALTQ_LOCALQ	# Local queueing discipline
96#options 	ALTQ_PRIQ	# Priority Queueing
97#options 	ALTQ_RED	# Random Early Detection
98#options 	ALTQ_RIO	# RED with IN/OUT
99#options 	ALTQ_WFQ	# Weighted Fair Queueing
100
101# Filesystems
102file-system 	FFS		# Berkeley fast file system
103file-system 	EXT2FS		# second extended file system (linux)
104#file-system 	LFS		# log-structured filesystem (experimental)
105
106file-system 	MFS		# Memory based filesystem
107
108file-system 	NFS		# Network File System client side code
109file-system 	ADOSFS		# AmigaDOS file system
110file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
111file-system 	MSDOSFS		# MS-DOS filesystem
112
113file-system 	KERNFS		# kernel data-structure filesystem
114
115file-system 	FDESC		# user file descriptor filesystem
116file-system 	NULLFS		# loopback filesystem
117file-system 	OVERLAY		# overlay filesystem
118#file-system 	PORTAL		# Portal filesystem
119file-system 	PROCFS		# /proc filesystem
120file-system 	UMAPFS		# NULLFS + uid and gid remapping
121file-system 	UNION		# union filesystem
122file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)
123file-system	PTYFS		# /dev/pts/N support
124#file-system	TMPFS		# experimental - Efficient memory file-system
125#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
126
127# Filesystem options
128
129#options 	FFS_EI		# FFS Endian Independant support
130
131options 	QUOTA		# User and group quotas in FFS
132options 	SOFTDEP		# FFS soft updates support.
133#options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
134options 	NFSSERVER	# Network File System server side code
135#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
136
137#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
138				# immutable) behave as system flags.
139
140#
141# Compatibility options for various existing systems
142#
143
144#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
145options 	COMPAT_43	# compatibility with 4.3BSD interfaces
146options 	COMPAT_09	# compatibility with NetBSD 0.9
147options 	COMPAT_10	# compatibility with NetBSD 1.0
148options 	COMPAT_12	# compatibility with NetBSD 1.2
149options 	COMPAT_13	# compatibility with NetBSD 1.3
150options 	COMPAT_14	# compatibility with NetBSD 1.4
151options 	COMPAT_15	# compatibility with NetBSD 1.5
152options 	COMPAT_16	# compatibility with NetBSD 1.6
153options 	COMPAT_20	# compatibility with NetBSD 2.0
154options 	COMPAT_30	# NetBSD 3.0 compatibility.
155options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
156options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
157options 	COMPAT_NOMID	# allow nonvalid machine id executables
158#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
159
160options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
161options 	COMPAT_AOUT_M68K # actually make some system calls work.
162options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
163
164#
165# Support for System V IPC facilities.
166#
167options 	SYSVSHM		# System V-like shared memory
168options 	SYSVMSG		# System V-like messages
169options 	SYSVSEM		# System V-like semaphores
170#options 	SEMMNI=10	# number of semaphore identifiers
171#options 	SEMMNS=60	# number of semaphores in system
172#options 	SEMUME=10	# max number of undo entries per process
173#options 	SEMMNU=30	# number of undo structures in system
174options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
175
176#
177# Support for various kernel options
178#
179
180options 	KTRACE		# system call tracing support
181options 	SYSTRACE	# system call vetting via systrace(1)
182options 	LKM		# Loadable kernel modules
183#options 	INSECURE	# disable kernel security levels
184options 	SCSIVERBOSE	# human readable SCSI error messages
185options 	USERCONF	# userconf(4) support
186options 	NTP		# NTP phase/frequency locked loop
187#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
188
189# Enable experimental buffer queue strategy for better responsiveness under 
190# high disk I/O load. Use it with caution - it's not proven to be stable yet.
191#options 	BUFQ_READPRIO
192#options 	BUFQ_PRIOCSCAN
193
194#
195# Misc. debugging options
196#
197options 	DDB		# Kernel debugger
198#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
199#options 	DIAGNOSTIC	# Extra kernel sanity checks
200#options 	DEBUG		# Enable misc. kernel debugging code
201#options 	SYSCALL_DEBUG	# debug all syscalls.
202#options 	SCSIDEBUG	# Add SCSI debugging statements
203#options 	PANICBUTTON	# Forced crash via keypress (?)
204
205#
206# Amiga specific options
207#
208#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
209				# first bank of RAM. (default: unlimited)
210#options 	NKPTADD=4	# set this for 4 additional KPT pages
211#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
212				# per 16 MB (1<<24 bytes) of RAM
213				# uncomment and decrease this, or uncomment and
214				# increase NKPTADD if you get "out of PT pages"
215				# panics.
216
217# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
218# before the 10 secondinterval ends, or that KBDRESET does work at all.
219#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
220
221# These options improve performance with the built-in serial port
222# on slower Amigas.  Try the larger buffers first then lev6_defer.
223#options 	SERIBUF_SIZE=4096
224#options 	SEROBUF_SIZE=32
225#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
226
227#options	DEVRELOAD	# implement /dev/reload
228#				# currently only works for a.out kernels
229
230options 	RETINACONSOLE	# enable code to allow retina to be console
231options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
232options 	CL5426CONSOLE	# Cirrus console
233options 	CV64CONSOLE	# CyberVision console
234options 	TSENGCONSOLE	# Tseng console
235options 	CV3DCONSOLE	# CyberVision 64/3D console
236
237options 	GRF_ECS		# Enhanced Chip Set
238options 	GRF_NTSC	# NTSC
239options 	GRF_PAL		# PAL
240options 	GRF_A2024	# Support for the A2024
241options 	GRF_AGA		# AGA Chip Set
242options 	GRF_AGA_VGA	# AGA VGAONLY timing
243options 	GRF_SUPER72	# AGA Super-72
244#options 	KFONT_8X11	# 8x11 font
245
246# select a font for the console according to the character set and keymap
247# you want to use
248options        KFONT_CONS_ISO8859_1
249#options         KFONT_CONS_ISO8859_2
250
251# This is how you would tell the kernel the A2410 oscillator frequencies:
252# The used frequencies are the defaults, and do not need option setting
253#options 	ULOWELL_OSC1=36000000
254#options 	ULOWELL_OSC2=66667000
255
256# This is how you specify the blitting speed, higher values may speed up blits
257# a littel bit.  If you raise this value too much some trash may appear.
258# the commented version is the default.
259#options 	RH_MEMCLK=61000000
260# this option enables the 64 bit sprite which does not work
261# for quite a few people.  E.g. The cursor sprite will turn to a block
262# when moved to the top of the screen in X.
263#options 	RH_64BIT_SPRITE
264# enables fast scroll code appears to now work on 040 systems.
265#options 	RETINA_SPEED_HACK
266# enables the Hardwarecursor which does not work on some systems.
267#options 	RH_HARDWARECURSOR
268
269# wscons aware interface to amiga custom chips.
270# If you enable it enable also wskbd.
271#
272
273#amidisplaycc0	at mainbus0		# wscons interface to custom chips
274#wsdisplay0	at amidisplaycc0 console ?
275#options 	WSEMUL_VT100
276#options 	FONT_VT220L8x10
277#options	FONT_VT220ISO8x16
278
279grfcc0		at mainbus0		# custom chips
280grfrt0		at zbus0		# retina II
281grfrh0		at zbus0		# retina III
282grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
283grful0		at zbus0		# A2410
284grfcv0		at zbus0		# CyberVision 64
285grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
286grfcv3d0	at zbus0		# CyberVision 64/3D
287
288grf0		at grfcc0
289grf1		at grfrt0
290grf2		at grfrh0
291grf3		at grfcl?
292grf4		at grful0
293grf5		at grfcv0
294grf6		at grfet?
295grf7		at grfcv3d0
296ite0		at grf0			# terminal emulators for grfs
297ite1		at grf1			# terminal emulators for grfs
298ite2		at grf2			# terminal emulators for grfs
299ite3		at grf3			# terminal emulators for grfs
300ite4		at grf4			# terminal emulators for grfs
301ite5		at grf5			# terminal emulators for grfs
302ite6		at grf6			# terminal emulators for grfs
303ite7		at grf7			# terminal emulators for grfs
304
305msc0		at zbus0		# A2232 MSC multiport serial.
306mfc0		at zbus0		# MultiFaceCard I/O board
307mfcs0		at mfc0 unit 0		# MFC serial
308mfcs1		at mfc0 unit 1		# MFC serial
309#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
310#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
311#mfcs2		at mfc1 unit 0
312#mfcs3		at mfc1 unit 1
313#mfcp1		at mfc1 unit 0
314
315hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
316#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
317com*		at hyper? port ?	# Hypercom3/4 serial ports
318lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
319
320#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
321#options 	IOBZCLOCK=24000000	# if needed.
322
323iobl*		at zbus?		# zbus IOBlix
324com*		at iobl? port ?		# IOBlix serial ports
325lpt*		at iobl? port ?		# IOBlix parallel ports
326
327
328#
329# Keyboard device. Optionally can attach a wskbd.
330# wskbd works together with a wsdisplay so enable them both if you will.
331# Don't enable wskbd if you use ite.
332#
333# XXX in std.amiga: kbd0 at mainbus0
334
335#wskbd0		at kbd0 console ?
336
337
338#
339# Amiga Mainboard devices (sans graphics and keyboard)
340#
341
342ser0		at mainbus0		# Amiga onboard serial
343par0		at mainbus0		# Amiga onboard parallel
344ms*		at mainbus0		# Amiga mice
345fdc0		at mainbus0		# Amiga FDC
346fd*		at fdc0 unit ?		# floppy disks on the later
347a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
348a2kbbc0 	at mainbus0		# A2000 battery backed clock
349aucc*		at mainbus0		# Amiga CC audio
350audio*		at aucc?
351
352
353#wsmouse*	at ms?
354
355#
356# DraCo Mainboard devices (sans keyboard)
357#
358
359drbbc0		at mainbus0		# DraCo battery backed clock
360drsupio0	at mainbus0		# DraCo superio chip
361com*		at drsupio? port ?	# DraCo serial
362lpt0		at drsupio? port ?	# DraCo parallel
363
364#
365# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
366#
367
368
369repulse*	at zbus0		# ALiENDESiGN Repulse
370audio*		at repulse?
371
372toccata*	at zbus0		# MacroSystem GmbH Toccata
373audio*		at toccata?
374
375# Ethernet cards:
376le*		at zbus0		# A2065, Ameristar, Ariadne
377ne*		at zbus0		# AriadneII, X-surf
378ed*		at zbus0		# Hydra, ASDG LanRover
379es*		at zbus0		# CEI A4066 EthernetPLUS
380qn*		at zbus0		# Quicknet
381
382# Arcnet
383bah*		at zbus0		# C=/Ameristar A2060 / 560
384
385# Greater Valley Product Bus
386gvpbus* 	at zbus0
387
388# scsi stuff, all possible
389gtsc0		at gvpbus?		# GVP series II scsi
390scsibus*	at gtsc0
391ahsc0		at mainbus0		# A3000 scsi
392scsibus*	at ahsc0
393atzsc0		at zbus0		# A2091 scsi
394scsibus*	at atzsc0
395wstsc0		at zbus0		# Wordsync II scsi
396scsibus*	at wstsc0
397ivsc0		at zbus0		# IVS scsi
398scsibus*	at ivsc0
399mlhsc0		at zbus0		# Hacker scsi
400scsibus*	at mlhsc0
401otgsc0		at zbus0		# 12 gauge scsi
402scsibus*	at otgsc0
403zssc0		at zbus0		# Zeus scsi
404scsibus*	at zssc0
405mgnsc0		at zbus0		# Magnum scsi
406scsibus*	at mgnsc0
407wesc0		at zbus0		# Warp Engine scsi
408scsibus*	at wesc0
409afsc0		at zbus0		# A4091 scsi
410scsibus*	at afsc0
411aftsc0		at mainbus0		# A4000T scsi
412scsibus*	at aftsc0
413flsc0		at zbus0		# FastlaneZ3 scsi
414scsibus*	at flsc0
415bzsc0		at zbus0		# Blizzard 1230 I,II scsi
416scsibus*	at bzsc0
417bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
418scsibus*	at bzivsc0
419bztzsc0 	at zbus0		# Blizzard 2060 scsi
420scsibus*	at bztzsc0
421cbsc0		at zbus0		# CyberSCSI I
422scsibus*	at cbsc0
423cbiisc0 	at zbus0		# CyberSCSI II
424scsibus*	at cbiisc0
425cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
426scsibus*	at cbiiisc0
427empsc0		at zbus0		# Emplant scsi
428scsibus*	at empsc0
429
430wdc0		at mainbus0		# A4000 & A1200 IDE bus
431atabus* 	at wdc? channel ?	# ATA bus
432wd*		at atabus? drive ?	#  + drives
433atapibus*	at atabus?		# ATAPI bus
434cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
435sd*		at atapibus? drive ?	# ATAPI disk drives
436
437pccard0		at mainbus0
438pcmcia*		at pccard0
439com*		at pcmcia? function ?		# Modems and serial cards
440pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
441aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
442wdc*		at pcmcia? function ?
443awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
444ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
445mbe*		at pcmcia? function ?		# MB8696x based Ethernet
446ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
447sm*		at pcmcia? function ?		# Megahertz Ethernet
448mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
449com*		at mhzc?
450sm*		at mhzc?
451
452
453drsc0		at mainbus0		# DraCo scsi
454scsibus*	at drsc0
455
456
457# each hard drive from low target to high
458# will configure to the next available sd unit number
459sd*	at scsibus? target ? lun ?	# scsi disks
460st*	at scsibus? target ? lun ?	# scsi tapes
461cd*	at scsibus? target ? lun ?	# scsi cds
462ch*	at scsibus? target ? lun ?	# scsi autochangers
463ss*	at scsibus? target ? lun ?	# scsi scanner
464uk*	at scsibus? target ? lun ?	# scsi unknown
465
466pseudo-device	loop			# loopback network interface
467pseudo-device	sl		1	# SLIP network interfaces
468pseudo-device	ppp		1	# PPP network interfaces
469pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
470pseudo-device	tun		1	# network tunnel line discipline
471pseudo-device	tap			# virtual Ethernet
472#pseudo-device	gre		2	# generic L3 over IP tunnel
473pseudo-device	bpfilter	16	# Berkeley packet filter
474pseudo-device	ipfilter		# IP Filter package
475pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
476#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
477#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
478pseudo-device	vlan			# IEEE 802.1q encapsulation
479pseudo-device	bridge			# simple inter-network bridging
480#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
481#pseudo-device	pf			# PF packet filter
482#pseudo-device	pflog			# PF log if
483pseudo-device	fss		4	# file system snapshot device
484
485pseudo-device	view		4	# views (needed for grfcc)
486pseudo-device	pty			# pseudo-terminals
487pseudo-device	clockctl		# user control of clock subsystem
488
489#pseudo-device	wsfont			# wsfont(4) dynamic font loading support
490#pseudo-device	wsmux			# mouse & keyboard multiplexor
491
492pseudo-device	vnd		4	# vnode pseudo-disks
493#options 	VND_COMPRESSION		# compressed vnd(4)
494pseudo-device	ccd		4	# concatenated disk devices
495#pseudo-device	cgd		4	# cryptographic disk devices
496pseudo-device	raid		8	# RAIDframe disk driver
497options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
498# Options to enable various other RAIDframe RAID types.
499# options 	RF_INCLUDE_EVENODD=1
500# options 	RF_INCLUDE_RAID5_RS=1
501# options 	RF_INCLUDE_PARITYLOGGING=1
502# options 	RF_INCLUDE_CHAINDECLUSTER=1
503# options 	RF_INCLUDE_INTERDECLUSTER=1
504# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
505# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
506
507pseudo-device	rnd			# /dev/random and in-kernel generator
508#options 	RND_COM			# use "com" randomness as well (BROKEN)
509
510pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
511pseudo-device	nsmb			# experimental - SMB requester
512
513# Veriexec
514#options VERIFIED_EXEC
515#
516# a pseudo device needed for veriexec
517#pseudo-device	veriexec		1
518#
519# Uncomment the fingerprint methods below that are desired. Note that
520# removing fingerprint methods will have almost no impact on the kernel
521# code size.
522#
523#options VERIFIED_EXEC_FP_RMD160
524#options VERIFIED_EXEC_FP_SHA256
525#options VERIFIED_EXEC_FP_SHA384
526#options VERIFIED_EXEC_FP_SHA512
527#options VERIFIED_EXEC_FP_SHA1
528#options VERIFIED_EXEC_FP_MD5
529
530config	netbsd root on ? type ?
531