GENERIC revision 1.255
1 # $NetBSD: GENERIC,v 1.255 2008/09/24 17:20:43 tsutsui Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.68 2008/09/24 17:18:02 tsutsui Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.255 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options DRACO 41 options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47 options P5PPC68KBOARD # Phase5 PPC/68K board support 48 # 49 # processors this kernel should support 50 # 51 options M68060 # support for 060 52 options M060SP # MC68060 software support (Required for 060) 53 options M68040 # support for 040 54 options FPSP # MC68040 floating point support 55 options M68030 # support for 030 56 options M68020 # support for 020/851 57 options FPU_EMULATE # FPU emulation 58 59 # 60 # Networking options 61 # 62 options INET # IP networking support (Required) 63 options INET6 # IPV6 64 #options IPSEC # IP security 65 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 67 #options IPSEC_DEBUG # debug for IP security 68 #options GATEWAY # Packet forwarding 69 #options DIRECTED_BROADCAST # Broadcast across subnets 70 71 #options MROUTING # Multicast routing 72 #options PIM # Protocol Independent Multicast 73 #options ISO,TPIP # OSI 74 #options EON # OSI tunneling over IP 75 options NETATALK # AppleTalk networking protocols 76 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 78 options PPP_BSDCOMP # BSD-Compress compression support for PPP 79 options PPP_DEFLATE # Deflate compression support for PPP 80 options PPP_FILTER # Active filter support for PPP (requires bpf) 81 options PFIL_HOOKS # pfil(9) packet filter hooks 82 options IPFILTER_LOG # ipmon(8) log support 83 options IPFILTER_LOOKUP # ippool(8) support 84 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86 #options ALTQ # Manipulate network interfaces' output queues 87 #options ALTQ_BLUE # Stochastic Fair Blue 88 #options ALTQ_CBQ # Class-Based Queueing 89 #options ALTQ_CDNR # Diffserv Traffic Conditioner 90 #options ALTQ_FIFOQ # First-In First-Out Queue 91 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 92 #options ALTQ_HFSC # Hierarchical Fair Service Curve 93 #options ALTQ_LOCALQ # Local queueing discipline 94 #options ALTQ_PRIQ # Priority Queueing 95 #options ALTQ_RED # Random Early Detection 96 #options ALTQ_RIO # RED with IN/OUT 97 #options ALTQ_WFQ # Weighted Fair Queueing 98 99 # Filesystems 100 file-system FFS # Berkeley fast file system 101 file-system EXT2FS # second extended file system (linux) 102 #file-system LFS # log-structured filesystem (experimental) 103 104 file-system MFS # Memory based filesystem 105 106 file-system NFS # Network File System client side code 107 file-system ADOSFS # AmigaDOS file system 108 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 109 file-system MSDOSFS # MS-DOS filesystem 110 111 file-system KERNFS # kernel data-structure filesystem 112 113 file-system FDESC # user file descriptor filesystem 114 file-system NULLFS # loopback filesystem 115 file-system OVERLAY # overlay filesystem 116 #file-system PORTAL # Portal filesystem 117 file-system PROCFS # /proc filesystem 118 file-system UMAPFS # NULLFS + uid and gid remapping 119 file-system UNION # union filesystem 120 file-system SMBFS # experimental - CIFS; also needs nsmb (below) 121 file-system PTYFS # /dev/pts/N support 122 #file-system TMPFS # Efficient memory file-system 123 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 124 125 # Filesystem options 126 127 #options FFS_EI # FFS Endian Independant support 128 options WAPBL # File system journaling support - Experimental 129 130 options QUOTA # User and group quotas in FFS 131 options SOFTDEP # FFS soft updates support. 132 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 133 options NFSSERVER # Network File System server side code 134 #options FFS_NO_SNAPSHOT # No FFS snapshot support 135 136 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 137 # immutable) behave as system flags. 138 139 # 140 # Compatibility options for various existing systems 141 # 142 143 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 144 options COMPAT_43 # compatibility with 4.3BSD interfaces 145 options COMPAT_09 # compatibility with NetBSD 0.9 146 options COMPAT_10 # compatibility with NetBSD 1.0 147 options COMPAT_12 # compatibility with NetBSD 1.2 148 options COMPAT_13 # compatibility with NetBSD 1.3 149 options COMPAT_14 # compatibility with NetBSD 1.4 150 options COMPAT_15 # compatibility with NetBSD 1.5 151 options COMPAT_16 # compatibility with NetBSD 1.6 152 options COMPAT_20 # compatibility with NetBSD 2.0 153 options COMPAT_30 # NetBSD 3.0 compatibility. 154 options COMPAT_40 # NetBSD 4.0 compatibility. 155 options COMPAT_SUNOS # Support to run Sun (m68k) executables 156 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 157 options COMPAT_NOMID # allow nonvalid machine id executables 158 #options COMPAT_LINUX # Support to run Linux/m68k executables 159 160 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 161 options COMPAT_AOUT_M68K # actually make some system calls work. 162 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 163 164 # 165 # Support for System V IPC facilities. 166 # 167 options SYSVSHM # System V-like shared memory 168 options SYSVMSG # System V-like messages 169 options SYSVSEM # System V-like semaphores 170 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 171 172 # 173 # Support for various kernel options 174 # 175 176 options KTRACE # system call tracing support 177 options LKM # Loadable kernel modules 178 #options INSECURE # disable kernel security levels 179 options SCSIVERBOSE # human readable SCSI error messages 180 options USERCONF # userconf(4) support 181 options NTP # NTP phase/frequency locked loop 182 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 183 184 # Enable experimental buffer queue strategy for better responsiveness under 185 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 186 #options BUFQ_READPRIO 187 #options BUFQ_PRIOCSCAN 188 189 # 190 # Misc. debugging options 191 # 192 options DDB # Kernel debugger 193 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 194 #options DIAGNOSTIC # Extra kernel sanity checks 195 #options DEBUG # Enable misc. kernel debugging code 196 #options SYSCALL_DEBUG # debug all syscalls. 197 #options SCSIDEBUG # Add SCSI debugging statements 198 #options PANICBUTTON # Forced crash via keypress (?) 199 200 # 201 # Amiga specific options 202 # 203 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 204 # first bank of RAM. (default: unlimited) 205 #options NKPTADD=4 # set this for 4 additional KPT pages 206 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 207 # per 16 MB (1<<24 bytes) of RAM 208 # uncomment and decrease this, or uncomment and 209 # increase NKPTADD if you get "out of PT pages" 210 # panics. 211 212 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 213 # before the 10 secondinterval ends, or that KBDRESET does work at all. 214 #options KBDRESET # sync on Ctrl-Amiga-Amiga 215 216 # These options improve performance with the built-in serial port 217 # on slower Amigas. Try the larger buffers first then lev6_defer. 218 #options SERIBUF_SIZE=4096 219 #options SEROBUF_SIZE=32 220 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 221 222 #options DEVRELOAD # implement /dev/reload 223 # # currently only works for a.out kernels 224 225 options RETINACONSOLE # enable code to allow retina to be console 226 options ULOWELLCONSOLE # enable code to allow a2410 to be console 227 options CL5426CONSOLE # Cirrus console 228 options CV64CONSOLE # CyberVision console 229 options TSENGCONSOLE # Tseng console 230 options CV3DCONSOLE # CyberVision 64/3D console 231 232 options GRF_ECS # Enhanced Chip Set 233 options GRF_NTSC # NTSC 234 options GRF_PAL # PAL 235 options GRF_A2024 # Support for the A2024 236 options GRF_AGA # AGA Chip Set 237 options GRF_AGA_VGA # AGA VGAONLY timing 238 options GRF_SUPER72 # AGA Super-72 239 #options KFONT_8X11 # 8x11 font 240 241 # select a font for the console according to the character set and keymap 242 # you want to use 243 options KFONT_CONS_ISO8859_1 244 #options KFONT_CONS_ISO8859_2 245 246 # This is how you would tell the kernel the A2410 oscillator frequencies: 247 # The used frequencies are the defaults, and do not need option setting 248 #options ULOWELL_OSC1=36000000 249 #options ULOWELL_OSC2=66667000 250 251 # This is how you specify the blitting speed, higher values may speed up blits 252 # a littel bit. If you raise this value too much some trash may appear. 253 # the commented version is the default. 254 #options RH_MEMCLK=61000000 255 # this option enables the 64 bit sprite which does not work 256 # for quite a few people. E.g. The cursor sprite will turn to a block 257 # when moved to the top of the screen in X. 258 #options RH_64BIT_SPRITE 259 # enables fast scroll code appears to now work on 040 systems. 260 #options RETINA_SPEED_HACK 261 # enables the Hardwarecursor which does not work on some systems. 262 #options RH_HARDWARECURSOR 263 264 # wscons aware interface to amiga custom chips. 265 # If you enable it enable also wskbd. 266 # 267 268 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 269 #wsdisplay0 at amidisplaycc0 console ? 270 #options WSEMUL_VT100 271 #options FONT_VT220L8x10 272 #options FONT_VT220ISO8x16 273 274 grfcc0 at mainbus0 # custom chips 275 grfrt0 at zbus0 # retina II 276 grfrh0 at zbus0 # retina III 277 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 278 grful0 at zbus0 # A2410 279 grfcv0 at zbus0 # CyberVision 64 280 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 281 grfcv3d0 at zbus0 # CyberVision 64/3D 282 283 grf0 at grfcc0 284 grf1 at grfrt0 285 grf2 at grfrh0 286 grf3 at grfcl? 287 grf4 at grful0 288 grf5 at grfcv0 289 grf6 at grfet? 290 grf7 at grfcv3d0 291 ite0 at grf0 # terminal emulators for grfs 292 ite1 at grf1 # terminal emulators for grfs 293 ite2 at grf2 # terminal emulators for grfs 294 ite3 at grf3 # terminal emulators for grfs 295 ite4 at grf4 # terminal emulators for grfs 296 ite5 at grf5 # terminal emulators for grfs 297 ite6 at grf6 # terminal emulators for grfs 298 ite7 at grf7 # terminal emulators for grfs 299 300 msc0 at zbus0 # A2232 MSC multiport serial. 301 mfc0 at zbus0 # MultiFaceCard I/O board 302 mfcs0 at mfc0 unit 0 # MFC serial 303 mfcs1 at mfc0 unit 1 # MFC serial 304 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 305 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 306 #mfcs2 at mfc1 unit 0 307 #mfcs3 at mfc1 unit 1 308 #mfcp1 at mfc1 unit 0 309 310 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 311 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 312 com* at hyper? port ? # Hypercom3/4 serial ports 313 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 314 315 #options IOBZCLOCK=22118400 # default, uncomment the next line 316 #options IOBZCLOCK=24000000 # if needed. 317 318 iobl* at zbus? # zbus IOBlix 319 com* at iobl? port ? # IOBlix serial ports 320 lpt* at iobl? port ? # IOBlix parallel ports 321 322 323 # 324 # Keyboard device. Optionally can attach a wskbd. 325 # wskbd works together with a wsdisplay so enable them both if you will. 326 # Don't enable wskbd if you use ite. 327 # 328 # XXX in std.amiga: kbd0 at mainbus0 329 330 #wskbd0 at kbd0 console ? 331 332 333 # 334 # Amiga Mainboard devices (sans graphics and keyboard) 335 # 336 337 ser0 at mainbus0 # Amiga onboard serial 338 par0 at mainbus0 # Amiga onboard parallel 339 ms* at mainbus0 # Amiga mice 340 fdc0 at mainbus0 # Amiga FDC 341 fd* at fdc0 unit ? # floppy disks on the later 342 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 343 a2kbbc0 at mainbus0 # A2000 battery backed clock 344 aucc* at mainbus0 # Amiga CC audio 345 audio* at aucc? 346 347 348 #wsmouse* at ms? 349 350 # 351 # DraCo Mainboard devices (sans keyboard) 352 # 353 354 drbbc0 at mainbus0 # DraCo battery backed clock 355 drsupio0 at mainbus0 # DraCo superio chip 356 com* at drsupio? port ? # DraCo serial 357 lpt0 at drsupio? port ? # DraCo parallel 358 359 # 360 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 361 # 362 363 364 repulse* at zbus0 # ALiENDESiGN Repulse 365 audio* at repulse? 366 367 toccata* at zbus0 # MacroSystem GmbH Toccata 368 audio* at toccata? 369 370 # Ethernet cards: 371 le* at zbus0 # A2065, Ameristar, Ariadne 372 ne* at zbus0 # AriadneII, X-surf 373 ed* at zbus0 # Hydra, ASDG LanRover 374 es* at zbus0 # CEI A4066 EthernetPLUS 375 qn* at zbus0 # Quicknet 376 377 # Arcnet 378 bah* at zbus0 # C=/Ameristar A2060 / 560 379 380 # Greater Valley Product Bus 381 gvpbus* at zbus0 382 383 # scsi stuff, all possible 384 gtsc0 at gvpbus? # GVP series II scsi 385 scsibus* at gtsc0 386 ahsc0 at mainbus0 # A3000 scsi 387 scsibus* at ahsc0 388 atzsc0 at zbus0 # A2091 scsi 389 scsibus* at atzsc0 390 wstsc0 at zbus0 # Wordsync II scsi 391 scsibus* at wstsc0 392 ivsc0 at zbus0 # IVS scsi 393 scsibus* at ivsc0 394 mlhsc0 at zbus0 # Hacker scsi 395 scsibus* at mlhsc0 396 otgsc0 at zbus0 # 12 gauge scsi 397 scsibus* at otgsc0 398 zssc0 at zbus0 # Zeus scsi 399 scsibus* at zssc0 400 mgnsc0 at zbus0 # Magnum scsi 401 scsibus* at mgnsc0 402 wesc0 at zbus0 # Warp Engine scsi 403 scsibus* at wesc0 404 afsc0 at zbus0 # A4091 scsi 405 scsibus* at afsc0 406 aftsc0 at mainbus0 # A4000T scsi 407 scsibus* at aftsc0 408 flsc0 at zbus0 # FastlaneZ3 scsi 409 scsibus* at flsc0 410 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 411 scsibus* at bzsc0 412 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 413 scsibus* at bzivsc0 414 bztzsc0 at zbus0 # Blizzard 2060 scsi 415 scsibus* at bztzsc0 416 cbsc0 at zbus0 # CyberSCSI I 417 scsibus* at cbsc0 418 cbiisc0 at zbus0 # CyberSCSI II 419 scsibus* at cbiisc0 420 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 421 scsibus* at cbiiisc0 422 empsc0 at zbus0 # Emplant scsi 423 scsibus* at empsc0 424 425 wdc0 at mainbus0 # A4000 & A1200 IDE bus 426 wdc* at zbus0 # Buddha / Catweasel 427 428 atabus* at wdc? channel ? # ATA bus 429 wd* at atabus? drive ? # + drives 430 atapibus* at atabus? # ATAPI bus 431 cd* at atapibus? drive ? # ATAPI CD-ROM drives 432 sd* at atapibus? drive ? # ATAPI disk drives 433 434 pccard0 at mainbus0 435 pcmcia* at pccard0 436 com* at pcmcia? function ? # Modems and serial cards 437 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 438 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 439 wdc* at pcmcia? function ? 440 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 441 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 442 mbe* at pcmcia? function ? # MB8696x based Ethernet 443 ne* at pcmcia? function ? # NE2000-compatible Ethernet 444 sm* at pcmcia? function ? # Megahertz Ethernet 445 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 446 com* at mhzc? 447 sm* at mhzc? 448 449 450 drsc0 at mainbus0 # DraCo scsi 451 scsibus* at drsc0 452 453 454 # each hard drive from low target to high 455 # will configure to the next available sd unit number 456 sd* at scsibus? target ? lun ? # scsi disks 457 st* at scsibus? target ? lun ? # scsi tapes 458 cd* at scsibus? target ? lun ? # scsi cds 459 ch* at scsibus? target ? lun ? # scsi autochangers 460 ss* at scsibus? target ? lun ? # scsi scanner 461 uk* at scsibus? target ? lun ? # scsi unknown 462 463 # 464 # accept filters 465 pseudo-device accf_data # "dataready" accept filter 466 pseudo-device accf_http # "httpready" accept filter 467 468 pseudo-device loop # loopback network interface 469 pseudo-device sl # SLIP network interfaces 470 pseudo-device ppp # PPP network interfaces 471 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 472 pseudo-device tun # network tunnel line discipline 473 pseudo-device tap # virtual Ethernet 474 #pseudo-device gre # generic L3 over IP tunnel 475 pseudo-device bpfilter # Berkeley packet filter 476 #pseudo-device carp # Common Address Redundancy Protocol 477 pseudo-device ipfilter # IP Filter package 478 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 479 #pseudo-device faith # IPv[46] tcp relay translation i/f 480 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 481 pseudo-device vlan # IEEE 802.1q encapsulation 482 pseudo-device bridge # simple inter-network bridging 483 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 484 pseudo-device agr # IEEE 802.3ad link aggregation 485 #pseudo-device pf # PF packet filter 486 #pseudo-device pflog # PF log if 487 pseudo-device fss 4 # file system snapshot device 488 489 pseudo-device view 4 # views (needed for grfcc) 490 pseudo-device pty # pseudo-terminals 491 pseudo-device clockctl # user control of clock subsystem 492 493 #pseudo-device wsfont # wsfont(4) dynamic font loading support 494 #pseudo-device wsmux # mouse & keyboard multiplexor 495 496 pseudo-device vnd # vnode pseudo-disks 497 #options VND_COMPRESSION # compressed vnd(4) 498 pseudo-device ccd 4 # concatenated disk devices 499 #pseudo-device cgd 4 # cryptographic disk devices 500 pseudo-device raid 8 # RAIDframe disk driver 501 options RAID_AUTOCONFIG # auto-configuration of RAID components 502 # Options to enable various other RAIDframe RAID types. 503 # options RF_INCLUDE_EVENODD=1 504 # options RF_INCLUDE_RAID5_RS=1 505 # options RF_INCLUDE_PARITYLOGGING=1 506 # options RF_INCLUDE_CHAINDECLUSTER=1 507 # options RF_INCLUDE_INTERDECLUSTER=1 508 # options RF_INCLUDE_PARITY_DECLUSTERING=1 509 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 510 511 pseudo-device rnd # /dev/random and in-kernel generator 512 #options RND_COM # use "com" randomness as well (BROKEN) 513 514 pseudo-device ksyms # /dev/ksyms (kernel symbols) 515 pseudo-device nsmb # experimental - SMB requester 516 517 # Veriexec 518 # 519 # a pseudo device needed for veriexec 520 #pseudo-device veriexec 1 521 # 522 # Uncomment the fingerprint methods below that are desired. Note that 523 # removing fingerprint methods will have almost no impact on the kernel 524 # code size. 525 # 526 #options VERIFIED_EXEC_FP_RMD160 527 #options VERIFIED_EXEC_FP_SHA256 528 #options VERIFIED_EXEC_FP_SHA384 529 #options VERIFIED_EXEC_FP_SHA512 530 #options VERIFIED_EXEC_FP_SHA1 531 #options VERIFIED_EXEC_FP_MD5 532 533 config netbsd root on ? type ? 534
Indexes created Fri Oct 03 02:09:57 GMT 2025