GENERIC revision 1.279
1# $NetBSD: GENERIC,v 1.279 2012/01/10 20:29:49 rkujawa Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.90 2011/12/26 13:07:24 mlelstv Exp $
7#
8##
9# GENERIC machine description file
10#
11# This machine description file is used to generate the default NetBSD
12# kernel.  The generic kernel does not include all options, subsystems
13# and device drivers, but should be useful for most applications.
14#
15# The machine description file can be customised for your specific
16# machine to reduce the kernel size and improve its performance.
17#
18# For further information on compiling NetBSD kernels, see the config(8)
19# man page.
20#
21# For further information on hardware support for this architecture, see
22# the intro(4) man page.  For further information about kernel options
23# for this architecture, see the options(4) man page.  For an explanation
24# of each device driver in this file see the section 4 man page for the
25# device.
26
27
28include "arch/amiga/conf/std.amiga"
29
30options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
31
32#ident 		"GENERIC-$Revision: 1.279 $"
33
34
35maxusers	8
36options 	RTC_OFFSET=0
37
38#
39# mainboards to support (in addition to Amiga)
40#
41options 	DRACO
42options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
43				# MC68060 with an OS ROM up to (at least)
44				# V40 (OS3.1) and want to boot with the
45				# bootblock.
46				# You do not need this if you have a DraCo,
47				# have no 68060 or NEVER use the bootblock
48options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
49#
50# processors this kernel should support
51#
52options 	M68060		# support for 060
53options 	M060SP		# MC68060 software support (Required for 060)
54options 	M68040		# support for 040
55options 	FPSP		# MC68040 floating point support
56options 	M68030		# support for 030
57options 	M68020		# support for 020/851
58options 	FPU_EMULATE	# FPU emulation
59
60#
61# Networking options
62#
63options 	INET		# IP networking support (Required)
64options 	INET6		# IPV6
65#options 	IPSEC		# IP security
66#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
67#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
68#options 	IPSEC_DEBUG	# debug for IP security
69#options 	GATEWAY		# Packet forwarding
70#options 	DIRECTED_BROADCAST	# Broadcast across subnets
71
72#options 	MROUTING	# Multicast routing
73#options 	PIM		# Protocol Independent Multicast
74#options 	ISO,TPIP	# OSI
75#options 	EON		# OSI tunneling over IP
76options 	NETATALK	# AppleTalk networking protocols
77#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
78
79options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
80options 	PPP_DEFLATE	# Deflate compression support for PPP
81options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
82options 	PFIL_HOOKS	# pfil(9) packet filter hooks
83options 	IPFILTER_LOG	# ipmon(8) log support
84options 	IPFILTER_LOOKUP	# ippool(8) support
85options 	IPFILTER_COMPAT # Compat for IP-Filter
86#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
87
88#options 	ALTQ		# Manipulate network interfaces' output queues
89#options 	ALTQ_BLUE	# Stochastic Fair Blue
90#options 	ALTQ_CBQ	# Class-Based Queueing
91#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
92#options 	ALTQ_FIFOQ	# First-In First-Out Queue
93#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
94#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
95#options 	ALTQ_LOCALQ	# Local queueing discipline
96#options 	ALTQ_PRIQ	# Priority Queueing
97#options 	ALTQ_RED	# Random Early Detection
98#options 	ALTQ_RIO	# RED with IN/OUT
99#options 	ALTQ_WFQ	# Weighted Fair Queueing
100
101# Filesystems
102file-system 	FFS		# Berkeley fast file system
103file-system 	EXT2FS		# second extended file system (linux)
104#file-system 	LFS		# log-structured filesystem (experimental)
105
106file-system 	MFS		# Memory based filesystem
107
108file-system 	NFS		# Network File System client side code
109file-system 	ADOSFS		# AmigaDOS file system
110file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
111file-system 	MSDOSFS		# MS-DOS filesystem
112
113file-system 	KERNFS		# kernel data-structure filesystem
114
115file-system 	FDESC		# user file descriptor filesystem
116file-system 	NULLFS		# loopback filesystem
117file-system 	OVERLAY		# overlay filesystem
118file-system 	PROCFS		# /proc filesystem
119file-system 	UMAPFS		# NULLFS + uid and gid remapping
120file-system 	UNION		# union filesystem
121file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)
122file-system	PTYFS		# /dev/pts/N support
123file-system	TMPFS		# Efficient memory file-system
124#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
125
126# Filesystem options
127
128#options 	FFS_EI		# FFS Endian Independent support
129options 	WAPBL		# File system journaling support
130
131options 	QUOTA		# legacy UFS quotas
132options 	QUOTA2		# new, in-filesystem UFS quotas
133#options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
134options 	NFSSERVER	# Network File System server side code
135#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
136
137#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
138				# immutable) behave as system flags.
139
140#
141# Compatibility options for various existing systems
142#
143
144#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
145options 	COMPAT_43	# compatibility with 4.3BSD interfaces
146options 	COMPAT_09	# compatibility with NetBSD 0.9
147options 	COMPAT_10	# compatibility with NetBSD 1.0
148options 	COMPAT_12	# compatibility with NetBSD 1.2
149options 	COMPAT_13	# compatibility with NetBSD 1.3
150options 	COMPAT_14	# compatibility with NetBSD 1.4
151options 	COMPAT_15	# compatibility with NetBSD 1.5
152options 	COMPAT_16	# compatibility with NetBSD 1.6
153options 	COMPAT_20	# compatibility with NetBSD 2.0
154options 	COMPAT_30	# NetBSD 3.0 compatibility.
155options 	COMPAT_40	# NetBSD 4.0 compatibility.
156options 	COMPAT_50	# NetBSD 5.0 compatibility.
157options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
158options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
159options 	COMPAT_NOMID	# allow nonvalid machine id executables
160#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
161
162options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
163options 	COMPAT_AOUT_M68K # actually make some system calls work.
164options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
165
166#
167# Support for System V IPC facilities.
168#
169options 	SYSVSHM		# System V-like shared memory
170options 	SYSVMSG		# System V-like messages
171options 	SYSVSEM		# System V-like semaphores
172options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
173
174#
175# Support for various kernel options
176#
177
178options 	KTRACE		# system call tracing support
179#options 	INSECURE	# disable kernel security levels
180options 	SCSIVERBOSE	# human readable SCSI error messages
181options 	USERCONF	# userconf(4) support
182options 	NTP		# NTP phase/frequency locked loop
183#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
184
185# Enable experimental buffer queue strategy for better responsiveness under 
186# high disk I/O load. Use it with caution - it's not proven to be stable yet.
187#options 	BUFQ_READPRIO
188#options 	BUFQ_PRIOCSCAN
189
190#
191# Misc. debugging options
192#
193options 	DDB		# Kernel debugger
194#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
195#options 	DIAGNOSTIC	# Extra kernel sanity checks
196#options 	DEBUG		# Enable misc. kernel debugging code
197#options 	SYSCALL_DEBUG	# debug all syscalls.
198#options 	SCSIDEBUG	# Add SCSI debugging statements
199#options 	PANICBUTTON	# Forced crash via keypress (?)
200
201#
202# Amiga specific options
203#
204#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
205				# first bank of RAM. (default: unlimited)
206#options 	NKPTADD=4	# set this for 4 additional KPT pages
207#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
208				# per 16 MB (1<<24 bytes) of RAM
209				# uncomment and decrease this, or uncomment and
210				# increase NKPTADD if you get "out of PT pages"
211				# panics.
212
213# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
214# before the 10 secondinterval ends, or that KBDRESET does work at all.
215#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
216
217# These options improve performance with the built-in serial port
218# on slower Amigas.  Try the larger buffers first then lev6_defer.
219#options 	SERIBUF_SIZE=4096
220#options 	SEROBUF_SIZE=32
221#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
222
223#options	DEVRELOAD	# implement /dev/reload
224#				# currently only works for a.out kernels
225
226options 	RETINACONSOLE	# enable code to allow retina to be console
227options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
228options 	CL5426CONSOLE	# Cirrus console
229options 	CV64CONSOLE	# CyberVision console
230options 	TSENGCONSOLE	# Tseng console
231options 	CV3DCONSOLE	# CyberVision 64/3D console
232
233options 	GRF_ECS		# Enhanced Chip Set
234options 	GRF_NTSC	# NTSC
235options 	GRF_PAL		# PAL
236options 	GRF_A2024	# Support for the A2024
237options 	GRF_AGA		# AGA Chip Set
238options 	GRF_AGA_VGA	# AGA VGAONLY timing
239options 	GRF_SUPER72	# AGA Super-72
240#options 	KFONT_8X11	# 8x11 font
241
242# select a font for the console according to the character set and keymap
243# you want to use
244options        KFONT_CONS_ISO8859_1
245#options         KFONT_CONS_ISO8859_2
246
247# This is how you would tell the kernel the A2410 oscillator frequencies:
248# The used frequencies are the defaults, and do not need option setting
249#options 	ULOWELL_OSC1=36000000
250#options 	ULOWELL_OSC2=66667000
251
252# This is how you specify the blitting speed, higher values may speed up blits
253# a littel bit.  If you raise this value too much some trash may appear.
254# the commented version is the default.
255#options 	RH_MEMCLK=61000000
256# this option enables the 64 bit sprite which does not work
257# for quite a few people.  E.g. The cursor sprite will turn to a block
258# when moved to the top of the screen in X.
259#options 	RH_64BIT_SPRITE
260# enables fast scroll code appears to now work on 040 systems.
261#options 	RETINA_SPEED_HACK
262# enables the Hardwarecursor which does not work on some systems.
263#options 	RH_HARDWARECURSOR
264
265# wscons aware interface to amiga custom chips.
266# If you enable it enable also wskbd.
267#
268#amidisplaycc0	at mainbus0		# wscons interface to custom chips
269#wsdisplay0	at amidisplaycc0 console ?
270#options 	WSEMUL_VT100
271#options 	FONT_VT220L8x10
272#options	FONT_VT220ISO8x16
273
274p5bus0		at zbus0		# Phase5 CSPPC/BPPC internal bus
275
276grfcc0		at mainbus0		# custom chips
277grfrt0		at zbus0		# retina II
278grfrh0		at zbus0		# retina III
279grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
280grful0		at zbus0		# A2410
281grfcv0		at zbus0		# CyberVision 64
282grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
283grfcv3d0	at zbus0		# CyberVision 64/3D
284
285grf0		at grfcc0
286grf1		at grfrt0
287grf2		at grfrh0
288grf3		at grfcl?
289grf4		at grful0
290grf5		at grfcv0
291grf6		at grfet?
292grf7		at grfcv3d0
293ite0		at grf0			# terminal emulators for grfs
294ite1		at grf1			# terminal emulators for grfs
295ite2		at grf2			# terminal emulators for grfs
296ite3		at grf3			# terminal emulators for grfs
297ite4		at grf4			# terminal emulators for grfs
298ite5		at grf5			# terminal emulators for grfs
299ite6		at grf6			# terminal emulators for grfs
300ite7		at grf7			# terminal emulators for grfs
301
302#wsdisplay*	at grf5 console ?	# wsdisplay on top of grf (CV64)
303#wsdisplay*	at grf7 console ?	# wsdisplay on top of grf (CV64/3D)
304
305msc0		at zbus0		# A2232 MSC multiport serial.
306mfc0		at zbus0		# MultiFaceCard I/O board
307mfcs0		at mfc0 unit 0		# MFC serial
308mfcs1		at mfc0 unit 1		# MFC serial
309#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
310#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
311#mfcs2		at mfc1 unit 0
312#mfcs3		at mfc1 unit 1
313#mfcp1		at mfc1 unit 0
314
315hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
316#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
317com*		at hyper? port ?	# Hypercom3/4 serial ports
318lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
319
320#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
321#options 	IOBZCLOCK=24000000	# if needed.
322
323iobl*		at zbus?		# zbus IOBlix
324com*		at iobl? port ?		# IOBlix serial ports
325lpt*		at iobl? port ?		# IOBlix parallel ports
326
327
328#
329# Keyboard device. Optionally can attach a wskbd.
330# wskbd works together with a wsdisplay so enable them both if you will.
331# Don't enable wskbd if you use ite.
332#
333# XXX in std.amiga: kbd0 at mainbus0
334#wskbd0		at kbd0 console ?
335
336
337#
338# Amiga Mainboard devices (sans graphics and keyboard)
339#
340
341ser0		at mainbus0		# Amiga onboard serial
342par0		at mainbus0		# Amiga onboard parallel
343ms*		at mainbus0		# Amiga mice
344fdc0		at mainbus0		# Amiga FDC
345fd*		at fdc0 unit ?		# floppy disks on the later
346a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
347a2kbbc0 	at mainbus0		# A2000 battery backed clock
348aucc*		at mainbus0		# Amiga CC audio
349audio*		at aucc?
350
351#wsmouse*	at ms?
352
353#
354# DraCo Mainboard devices (sans keyboard)
355#
356
357drbbc0		at mainbus0		# DraCo battery backed clock
358drsupio0	at mainbus0		# DraCo superio chip
359com*		at drsupio? port ?	# DraCo serial
360lpt0		at drsupio? port ?	# DraCo parallel
361
362#
363# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
364#
365
366
367repulse*	at zbus0		# ALiENDESiGN Repulse
368audio*		at repulse?
369
370toccata*	at zbus0		# MacroSystem GmbH Toccata
371audio*		at toccata?
372
373# Ethernet cards:
374le*		at zbus0		# A2065, Ameristar, Ariadne
375ne*		at zbus0		# AriadneII, X-surf
376ed*		at zbus0		# Hydra, ASDG LanRover
377es*		at zbus0		# CEI A4066 EthernetPLUS
378qn*		at zbus0		# Quicknet
379
380# Arcnet
381bah*		at zbus0		# C=/Ameristar A2060 / 560
382
383# Greater Valley Product Bus
384gvpbus* 	at zbus0
385
386# scsi stuff, all possible
387gtsc0		at gvpbus?		# GVP series II scsi
388scsibus*	at gtsc0
389ahsc0		at mainbus0		# A3000 scsi
390scsibus*	at ahsc0
391atzsc0		at zbus0		# A2091 scsi
392scsibus*	at atzsc0
393wstsc0		at zbus0		# Wordsync II scsi
394scsibus*	at wstsc0
395ivsc0		at zbus0		# IVS scsi
396scsibus*	at ivsc0
397mlhsc0		at zbus0		# Hacker scsi
398scsibus*	at mlhsc0
399otgsc0		at zbus0		# 12 gauge scsi
400scsibus*	at otgsc0
401zssc0		at zbus0		# Zeus scsi
402scsibus*	at zssc0
403mgnsc0		at zbus0		# Magnum scsi
404scsibus*	at mgnsc0
405wesc0		at zbus0		# Warp Engine scsi
406scsibus*	at wesc0
407bppcsc0		at p5bus0		# BlizzardPPC 603e+ scsi
408scsibus*	at bppcsc0
409afsc0		at zbus0		# A4091 scsi
410scsibus*	at afsc0
411aftsc0		at mainbus0		# A4000T scsi
412scsibus*	at aftsc0
413flsc0		at zbus0		# FastlaneZ3 scsi
414scsibus*	at flsc0
415bzsc0		at zbus0		# Blizzard 1230 I,II scsi
416scsibus*	at bzsc0
417bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
418scsibus*	at bzivsc0
419bztzsc0 	at zbus0		# Blizzard 2060 scsi
420scsibus*	at bztzsc0
421cbsc0		at zbus0		# CyberSCSI I
422scsibus*	at cbsc0
423cbiisc0 	at zbus0		# CyberSCSI II
424scsibus*	at cbiisc0
425cbiiisc0 	at p5bus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
426scsibus*	at cbiiisc0
427empsc0		at zbus0		# Emplant scsi
428scsibus*	at empsc0
429
430wdc0		at mainbus0		# A4000 & A1200 IDE bus
431wdc*		at zbus0		# Buddha / Catweasel
432efa0		at mainbus0		# ELBOX FastATA 1200 Mk-III/Mk-IV 
433
434atabus* 	at wdc? channel ?	# ATA bus
435atabus*		at efa? channel ?	# ATA bus 
436wd*		at atabus? drive ?	#  + drives
437atapibus*	at atabus?		# ATAPI bus
438cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
439sd*		at atapibus? drive ?	# ATAPI disk drives
440
441pccard0		at mainbus0
442pcmcia*		at pccard0
443com*		at pcmcia? function ?		# Modems and serial cards
444pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
445aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
446wdc*		at pcmcia? function ?
447awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
448ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
449mbe*		at pcmcia? function ?		# MB8696x based Ethernet
450ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
451sm*		at pcmcia? function ?		# Megahertz Ethernet
452mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
453com*		at mhzc?
454sm*		at mhzc?
455
456
457drsc0		at mainbus0		# DraCo scsi
458scsibus*	at drsc0
459
460
461# each hard drive from low target to high
462# will configure to the next available sd unit number
463sd*	at scsibus? target ? lun ?	# scsi disks
464st*	at scsibus? target ? lun ?	# scsi tapes
465cd*	at scsibus? target ? lun ?	# scsi cds
466ch*	at scsibus? target ? lun ?	# scsi autochangers
467ss*	at scsibus? target ? lun ?	# scsi scanner
468uk*	at scsibus? target ? lun ?	# scsi unknown
469
470# PCI bus support
471options		PCIVERBOSE              # verbose PCI device autoconfig messages
472#options	PCI_CONFIG_DUMP
473options		PCI_NETBSD_CONFIGURE	# used only by mppb(4)
474
475p5pb0		at p5bus0		# Phase5 PCI bridge (CVPPC/BVPPC/G-REX)
476p5membar*	at zbus0		# Phase5 PCI bridge autoconfiguring BARs
477#options	P5PB_OLD_FIRMWARE	# enable support for p5pb with old fw
478#options	P5PB_GENFB		# enable genfb support for CVPPC/BVPPC
479#options	P5PB_DEBUG		# enable excessive debug for p5pb
480pci*		at p5pb0
481
482mppb*           at zbus0		# Matay Prometheus Zorro-PCI bridge
483pci*            at mppb?
484
485#genfb*		at pci?			# generic fb, CVPPC/BVPPC only
486ne*             at pci?			# NE2000 Ethernet
487
488# Bluetooth Controller and Device support
489# tested only with btuart on an A1200
490
491# Bluetooth PCMCIA Controllers
492bt3c*   at pcmcia? function ?           # 3Com 3CRWB6096-A
493btbc*   at pcmcia? function ?           # AnyCom BlueCard LSE041/039/139
494
495# Bluetooth Device Hub
496bthub*  at bcsp?
497bthub*  at bt3c?
498bthub*  at btbc?
499bthub*  at btuart?
500
501# Bluetooth HID support
502bthidev* at bthub?
503
504# Bluetooth Mouse
505btms*   at bthidev? reportid ?
506wsmouse* at btms? mux 0
507
508# Bluetooth Keyboard
509#btkbd* at bthidev? reportid ?
510#wskbd* at btkbd? console ? mux 1
511
512# Bluetooth Apple Magic Mouse
513btmagic* at bthub?
514wsmouse* at btmagic? mux 0
515
516# Bluetooth Audio support
517#btsco* at bthub?
518
519#
520# accept filters
521pseudo-device	accf_data		# "dataready" accept filter
522pseudo-device	accf_http		# "httpready" accept filter
523
524pseudo-device	loop			# loopback network interface
525pseudo-device	sl			# SLIP network interfaces
526pseudo-device	ppp			# PPP network interfaces
527pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
528pseudo-device	tun			# network tunnel line discipline
529pseudo-device	tap			# virtual Ethernet
530#pseudo-device	gre			# generic L3 over IP tunnel
531pseudo-device	bpfilter		# Berkeley packet filter
532#pseudo-device	carp			# Common Address Redundancy Protocol
533pseudo-device	ipfilter		# IP Filter package
534pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
535#pseudo-device	faith			# IPv[46] tcp relay translation i/f
536pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
537pseudo-device	vlan			# IEEE 802.1q encapsulation
538pseudo-device	bridge			# simple inter-network bridging
539#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
540pseudo-device	agr			# IEEE 802.3ad link aggregation
541#pseudo-device	pf			# PF packet filter
542#pseudo-device	pflog			# PF log if
543pseudo-device	fss			# file system snapshot device
544pseudo-device	putter			# for puffs and pud
545
546pseudo-device	view		4	# views (needed for grfcc)
547pseudo-device	pty			# pseudo-terminals
548pseudo-device	clockctl		# user control of clock subsystem
549
550#pseudo-device	wsfont			# wsfont(4) dynamic font loading support
551#pseudo-device	wsmux			# mouse & keyboard multiplexor
552
553pseudo-device	vnd			# vnode pseudo-disks
554#options 	VND_COMPRESSION		# compressed vnd(4)
555pseudo-device	ccd		4	# concatenated disk devices
556#pseudo-device	cgd		4	# cryptographic disk devices
557pseudo-device	raid		8	# RAIDframe disk driver
558options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
559# Options to enable various other RAIDframe RAID types.
560# options 	RF_INCLUDE_EVENODD=1
561# options 	RF_INCLUDE_RAID5_RS=1
562# options 	RF_INCLUDE_PARITYLOGGING=1
563# options 	RF_INCLUDE_CHAINDECLUSTER=1
564# options 	RF_INCLUDE_INTERDECLUSTER=1
565# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
566# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
567
568#options 	RND_COM			# use "com" randomness as well (BROKEN)
569
570pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
571pseudo-device	nsmb			# experimental - SMB requester
572pseudo-device   bcsp                    # BlueCore Serial Protocol
573pseudo-device   btuart                  # Bluetooth HCI UART (H4)
574
575# Veriexec
576#
577# a pseudo device needed for veriexec
578#pseudo-device	veriexec		1
579#
580# Uncomment the fingerprint methods below that are desired. Note that
581# removing fingerprint methods will have almost no impact on the kernel
582# code size.
583#
584#options VERIFIED_EXEC_FP_RMD160
585#options VERIFIED_EXEC_FP_SHA256
586#options VERIFIED_EXEC_FP_SHA384
587#options VERIFIED_EXEC_FP_SHA512
588#options VERIFIED_EXEC_FP_SHA1
589#options VERIFIED_EXEC_FP_MD5
590
591config	netbsd root on ? type ?
592