MMNET_GENERIC revision 1.26
1 # $NetBSD: MMNET_GENERIC,v 1.26 2016/12/13 20:42:17 christos Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/evbarm/conf/std.mmnet" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.26 $" 26 27 maxusers 32 # estimated number of users 28 29 # CPU support. 30 options CPU_ARM9E 31 makeoptions CPUFLAGS="-mtune=arm926ej-s -mcpu=arm926ej-s" 32 33 # CPU-related options. 34 #options MATH_EMULATE # floating point emulation 35 36 # doesn't work with MP just yet.. 37 #options PERFCTRS # performance-monitoring counters support 38 39 #options MULTIBOOT # Multiboot support (see multiboot(8)) 40 41 # delay between "rebooting ..." message and hardware reset, in milliseconds 42 #options CPURESET_DELAY=2000 43 44 # This option allows you to force a serial console at the specified 45 # I/O address. see console(4) for details. 46 #options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600 47 # you don't want the option below ON iff you are using the 48 # serial console option of the new boot strap code. 49 #options CONS_OVERRIDE # Always use above! independent of boot info 50 51 # Standard system options 52 53 #options INSECURE # disable kernel security levels - X needs this 54 55 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 56 options NTP # NTP phase/frequency locked loop 57 58 options KTRACE # system call tracing via ktrace(1) 59 60 options SYSVMSG # System V-like message queues 61 options SYSVSEM # System V-like semaphores 62 options SYSVSHM # System V-like memory sharing 63 64 #options USERCONF # userconf(4) support 65 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 66 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 67 68 # Beep when it is safe to power down the system (requires sysbeep) 69 #options BEEP_ONHALT 70 # Some tunable details of the above feature (default values used below) 71 #options BEEP_ONHALT_COUNT=3 # Times to beep 72 #options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz) 73 #options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs) 74 75 # Enable experimental buffer queue strategy for better responsiveness under 76 # high disk I/O load. Likely stable but not yet the default. 77 #options BUFQ_READPRIO 78 #options BUFQ_PRIOCSCAN 79 80 # Diagnostic/debugging support options 81 options DIAGNOSTIC # expensive kernel consistency checks 82 options DEBUG # expensive debugging checks/support 83 options DDB # in-kernel debugger 84 options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic' 85 options DDB_HISTORY_SIZE=512 # enable history editing in DDB 86 #options KGDB # remote debugger 87 #options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600 88 makeoptions DEBUG="-g" # compile full symbol table 89 makeoptions COPTS="-Os" 90 makeoptions COPY_SYMTAB=1 91 #options SYSCALL_STATS # per syscall counts 92 #options SYSCALL_TIMES # per syscall times 93 #options SYSCALL_TIMES_HASCOUNTER # use 'broken' rdtsc (soekris) 94 95 # Compatibility options 96 options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries 97 #options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI 98 #options COMPAT_09 # NetBSD 0.9, 99 #options COMPAT_10 # NetBSD 1.0, 100 #options COMPAT_11 # NetBSD 1.1, 101 #options COMPAT_12 # NetBSD 1.2 (and 386BSD and BSDI) 102 #options COMPAT_13 # NetBSD 1.3 (and 386BSD and BSDI) 103 #options COMPAT_14 # NetBSD 1.4, 104 #options COMPAT_15 # NetBSD 1.5, 105 options COMPAT_16 # NetBSD 1.6, 106 options COMPAT_20 # NetBSD 2.0, and 107 options COMPAT_30 # NetBSD 3.0 binary compatibility 108 options COMPAT_43 # 4.3BSD, 386BSD, and BSDI 109 #options COMPAT_386BSD_MBRPART # recognize old partition ID 110 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 111 112 #options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility 113 #options COMPAT_SVR4 # binary compatibility with SVR4 114 #options COMPAT_IBCS2 # binary compatibility with SCO and ISC 115 #options COMPAT_LINUX # binary compatibility with Linux 116 #options COMPAT_FREEBSD # binary compatibility with FreeBSD 117 #options COMPAT_MACH # binary compatibility with Mach binaries 118 #options COMPAT_DARWIN # binary compatibility with Darwin binaries 119 #options EXEC_MACHO # exec MACH-O binaries 120 #options COMPAT_NDIS # NDIS network driver 121 #options COMPAT_PECOFF # kernel support to run Win32 apps 122 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 123 124 # File systems 125 file-system FFS # UFS 126 #file-system EXT2FS # second extended file system (linux) 127 #file-system LFS # log-structured file system 128 file-system MFS # memory file system 129 file-system NFS # Network File System client 130 #file-system NTFS # Windows/NT file system (experimental) 131 #file-system CD9660 # ISO 9660 + Rock Ridge file system 132 file-system MSDOSFS # MS-DOS file system 133 #file-system FDESC # /dev/fd 134 file-system KERNFS # /kern 135 file-system NULLFS # loopback file system 136 #file-system OVERLAY # overlay file system 137 #file-system PROCFS # /proc 138 #file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 139 #file-system UMAPFS # NULLFS + uid and gid remapping 140 file-system UNION # union file system 141 #file-system CODA # Coda File System; also needs vcoda (below) 142 #file-system SMBFS # experimental - CIFS; also needs nsmb (below) 143 file-system PTYFS # /dev/ptm support 144 file-system TMPFS # Efficient memory file-system 145 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 146 147 # File system options 148 #options QUOTA # UFS quotas 149 #options FFS_EI # FFS Endian Independent support 150 options WAPBL # File system journaling support 151 # Note that UFS_DIRHASH is suspected of causing kernel memory corruption. 152 # It is not recommended for general use. 153 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 154 #options NFSSERVER # Network File System server 155 options FFS_NO_SNAPSHOT # No FFS snapshot support 156 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 157 # immutable) behave as system flags. 158 159 # Networking options 160 options GATEWAY # packet forwarding 161 options INET # IP + ICMP + TCP + UDP 162 #options INET6 # IPV6 163 #options IPSEC # IP security 164 #options IPSEC_DEBUG # debug for IP security 165 #options MROUTING # IP multicast routing 166 #options PIM # Protocol Independent Multicast 167 #options NETATALK # AppleTalk networking protocols 168 options PPP_BSDCOMP # BSD-Compress compression support for PPP 169 options PPP_DEFLATE # Deflate compression support for PPP 170 options PPP_FILTER # Active filter support for PPP (requires bpf) 171 options IPFILTER_LOG # ipmon(8) log support 172 options IPFILTER_LOOKUP # ippool(8) support 173 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 174 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 175 176 #options ALTQ # Manipulate network interfaces' output queues 177 #options ALTQ_BLUE # Stochastic Fair Blue 178 #options ALTQ_CBQ # Class-Based Queueing 179 #options ALTQ_CDNR # Diffserv Traffic Conditioner 180 #options ALTQ_FIFOQ # First-In First-Out Queue 181 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 182 #options ALTQ_HFSC # Hierarchical Fair Service Curve 183 #options ALTQ_LOCALQ # Local queueing discipline 184 #options ALTQ_PRIQ # Priority Queueing 185 #options ALTQ_RED # Random Early Detection 186 #options ALTQ_RIO # RED with IN/OUT 187 #options ALTQ_WFQ # Weighted Fair Queueing 188 189 # These options enable verbose messages for several subsystems. 190 # Warning, these may compile large string tables into the kernel! 191 options MIIVERBOSE # verbose PHY autoconfig messages 192 options PCMCIAVERBOSE # verbose PCMCIA configuration messages 193 options SCSIVERBOSE # human readable SCSI error messages 194 options USBVERBOSE # verbose USB device autoconfig messages 195 196 options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM 197 198 # 199 # wscons options 200 # 201 # builtin terminal emulations 202 #options WSEMUL_SUN # sun terminal emulation 203 #options WSEMUL_VT100 # VT100 / VT220 emulation 204 # customization of console and kernel output - see dev/wscons/wsdisplayvar.h 205 #options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 206 #options WS_DEFAULT_FG=WSCOL_WHITE 207 #options WS_DEFAULT_BG=WSCOL_BLACK 208 #options WS_DEFAULT_COLATTR="(0)" 209 #options WS_DEFAULT_MONOATTR="(0)" 210 #options WS_KERNEL_FG=WSCOL_GREEN 211 #options WS_KERNEL_BG=WSCOL_BLACK 212 #options WS_KERNEL_COLATTR="" 213 #options WS_KERNEL_MONOATTR="" 214 # customization of console border color 215 #options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8) 216 #options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color 217 # compatibility to other console drivers 218 #options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 219 #options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 220 #options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 221 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 222 #options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode 223 #options WSKBD_USONLY # strip off non-US keymaps 224 # don't attach pckbd as the console if no PS/2 keyboard is found 225 #options PCKBD_CNATTACH_MAY_FAIL 226 # see dev/pckbport/wskbdmap_mfii.c for implemented layouts 227 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for pckbd driver 228 #options UKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for ukbd driver 229 # allocate a number of virtual screens at autoconfiguration time 230 #options WSDISPLAY_DEFAULTSCREENS=4 231 # use a large software cursor that doesn't blink 232 #options PCDISPLAY_SOFTCURSOR 233 # modify the screen type of the console; defaults to "80x25" 234 #options VGA_CONSOLE_SCREENTYPE="\"80x24\"" 235 # work around a hardware bug that loaded fonts don't work; found on ATI cards 236 #options VGA_CONSOLE_ATI_BROKEN_FONTSEL 237 # console scrolling support. 238 #options WSDISPLAY_SCROLLSUPPORT 239 # enable VGA raster mode capable of displaying multilingual text on console 240 #options VGA_RASTERCONSOLE 241 # enable splash screen support; requires hw driver support 242 #options SPLASHSCREEN 243 244 # Kernel root file system and dump configuration. 245 #config netbsd root on sd0c type ffs 246 config netbsd root on ? type ? 247 #config netbsd root on ? type ? 248 #config netbsd root on ? type nfs 249 250 # 251 # Device configuration 252 # 253 254 mainbus0 at root 255 256 cpu* at mainbus? 257 258 # Basic Bus Support 259 at91bus0 at mainbus? # AT91 bus 260 261 262 # Integrated peripherals: 263 # On-chip interrupt controller 264 at91aic0 at at91bus0 addr 0xfffff000 size 0x200 265 266 # On-chip timer 267 #at91st0 at at91bus0 addr 0xfffffd00 size 0x100 pid 1 268 at91tctmr0 at at91bus0 addr 0xfffa0000 size 0x40 pid 17 269 270 # On-chip debug UART 271 at91dbgu0 at at91bus0 addr 0xfffff200 size 0x200 pid 1 272 273 # On-chip UARTs 274 #at91usart0 at at91bus0 addr 0xfffc0000 size 0x4000 pid 6 275 #at91usart1 at at91bus0 addr 0xfffc4000 size 0x4000 pid 7 276 #at91usart2 at at91bus0 addr 0xfffc8000 size 0x4000 pid 8 277 #at91usart3 at at91bus0 addr 0xfffcc000 size 0x4000 pid 9 278 279 # On-chip ethernet 280 at91emac0 at at91bus0 addr 0xfffc4000 size 0x4000 pid 21 281 282 # General purpose I/O 283 at91pio0 at at91bus0 addr 0xfffff400 size 0x200 pid 2 284 at91pio1 at at91bus0 addr 0xfffff600 size 0x200 pid 3 285 at91pio2 at at91bus0 addr 0xfffff800 size 0x200 pid 4 286 gpio* at at91pio? 287 288 # On-chip CF interface 289 #at91cf0 at at91bus0 addr 0x50000000 size 0x900000 pid 4 290 #pcmcia0 at at91cf0 291 292 # On-chip USB 1.1 293 ohci0 at at91bus0 addr 0x00500000 size 0x100000 pid 20 294 295 # On-chip SPI 296 #at91spi0 at at91bus0 addr 0xfffe0000 size 0x4000 pid 13 297 #spi0 at at91spi0 298 #spi_obuf0 at spi0 slave 1 299 #gpio* at spi_obuf? 300 301 # On-chip I2C 302 at91twi0 at at91bus0 addr 0xfffac000 size 0x4000 pid 11 303 iic0 at at91twi? 304 #ds1672rtc* at iic0 addr 0x68 305 #seeprom* at iic0 addr 0x50 size 4096 306 307 # Hardware monitors 308 309 # AMD 768 and 8111 power/ACPI controllers 310 #dbcool* at iic? addr 0x2C # Unknown other motherboard(s) 311 #dbcool* at iic? addr 0x2D # Tyan S2881 312 #dbcool* at iic? addr 0x2E # Tyan S2882-D 313 314 # 1-Wire support 315 #gpioow* at gpio? offset 6 mask 0x1 # 1-wire bitbanging via gpio 316 #onewire* at gpioow? 317 318 # 1-Wire devices 319 #owtemp* at onewire? # Temperature sensors 320 321 # SCSI Controllers and Devices 322 323 # SCSI bus support 324 scsibus* at scsi? 325 326 # SCSI devices 327 sd* at scsibus? target ? lun ? # SCSI disk drives 328 #st* at scsibus? target ? lun ? # SCSI tape drives 329 #cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 330 #ch* at scsibus? target ? lun ? # SCSI autochangers 331 #ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices 332 #ss* at scsibus? target ? lun ? # SCSI scanners 333 #uk* at scsibus? target ? lun ? # SCSI unknown 334 335 336 # ATAPI bus support 337 atapibus* at atapi? 338 339 # ATAPI devices 340 # flags have the same meaning as for IDE drives. 341 #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 342 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 343 #st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 344 #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 345 346 347 # Miscellaneous mass storage devices 348 349 350 351 # Network Interfaces 352 353 # MII/PHY support 354 #acphy* at mii? phy ? # Altima AC101 and AMD Am79c874 PHYs 355 #amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs 356 #bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs 357 #brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs 358 #ciphy* at mii? phy ? # Cicada CS8201 Gig-E PHYs 359 #dmphy* at mii? phy ? # Davicom DM9101 PHYs 360 #exphy* at mii? phy ? # 3Com internal PHYs 361 #gentbi* at mii? phy ? # Generic Ten-Bit 1000BASE-[CLS]X PHYs 362 #glxtphy* at mii? phy ? # Level One LXT-1000 PHYs 363 #gphyter* at mii? phy ? # NS83861 Gig-E PHY 364 #icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 365 #igphy* at mii? phy ? # Intel IGP01E1000 366 #ikphy* at mii? phy ? # Intel 82563 PHYs 367 #inphy* at mii? phy ? # Intel 82555 PHYs 368 #iophy* at mii? phy ? # Intel 82553 PHYs 369 #lxtphy* at mii? phy ? # Level One LXT-970 PHYs 370 #makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs 371 #nsphy* at mii? phy ? # NS83840 PHYs 372 #nsphyter* at mii? phy ? # NS83843 PHYs 373 #pnaphy* at mii? phy ? # generic HomePNA PHYs 374 #qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 375 #rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 376 #rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 377 #sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 378 #tlphy* at mii? phy ? # ThunderLAN PHYs 379 #tqphy* at mii? phy ? # TDK Semiconductor PHYs 380 ukphy* at at91emac? phy ? 381 ukphy* at aue? phy ? # generic unknown PHYs 382 ukphy* at axe? phy ? # generic unknown PHYs 383 ukphy* at udav? phy ? # generic unknown PHYs 384 ukphy* at url? phy ? # generic unknown PHYs 385 #urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs 386 387 388 # USB Controller and Devices 389 390 # USB bus support 391 usb* at ohci? 392 393 # USB Hubs 394 uhub* at usb? 395 uhub* at uhub? port ? configuration ? interface ? 396 397 # USB HID device 398 #uhidev* at uhub? port ? configuration ? interface ? 399 400 # USB Mice 401 #ums* at uhidev? reportid ? 402 #wsmouse* at ums? mux 0 403 404 # USB eGalax touch-panel 405 #uep* at uhub? port ? 406 #wsmouse* at uep? mux 0 407 408 # USB Keyboards 409 #ukbd* at uhidev? reportid ? 410 #wskbd* at ukbd? console ? mux 1 411 412 # USB serial adapter 413 #ucycom* at uhidev? reportid ? 414 415 # USB Generic HID devices 416 #uhid* at uhidev? reportid ? 417 418 # USB Printer 419 #ulpt* at uhub? port ? configuration ? interface ? 420 421 # USB Modem 422 #umodem* at uhub? port ? configuration ? 423 #ucom* at umodem? 424 425 # USB Mass Storage 426 umass* at uhub? port ? configuration ? interface ? 427 wd* at umass? 428 429 # USB audio 430 #uaudio* at uhub? port ? configuration ? 431 432 # USB MIDI 433 #umidi* at uhub? port ? configuration ? 434 435 # USB IrDA 436 # USB-IrDA bridge spec 437 #uirda* at uhub? port ? configuration ? interface ? 438 #irframe* at uirda? 439 440 # SigmaTel STIr4200 USB/IrDA Bridge 441 #ustir* at uhub? port ? 442 #irframe* at ustir? 443 444 # USB Ethernet adapters 445 aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters 446 axe* at uhub? port ? # ASIX AX88172 based adapters 447 cdce* at uhub? port ? # CDC, Ethernet Networking Control Model 448 cue* at uhub? port ? # CATC USB-EL1201A based adapters 449 kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters 450 udav* at uhub? port ? # Davicom DM9601 based adapters 451 url* at uhub? port ? # Realtek RTL8150L based adapters 452 453 # USB 802.11 adapters 454 atu* at uhub? port ? # Atmel AT76C50XX based adapters 455 ural* at uhub? port ? # Ralink Technology RT2500USB 802.11a/b/g 456 rum* at uhub? port ? # Ralink Technology RT2501/RT2601 802.11a/b/g 457 458 # Prolific PL2301/PL2302 host-to-host adapter 459 upl* at uhub? port ? 460 461 # Serial adapters 462 ubsa* at uhub? port ? # Belkin serial adapter 463 ucom* at ubsa? portno ? 464 465 uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter 466 ucom* at uftdi? portno ? 467 468 #uipaq* at uhub? port ? # iPAQ PDAs 469 #ucom* at uipaq? portno ? 470 471 umct* at uhub? port ? # MCT USB-RS232 serial adapter 472 ucom* at umct? portno ? 473 474 uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 475 ucom* at uplcom? portno ? 476 477 uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter 478 ucom* at uvscom? portno ? 479 480 # Diamond Multimedia Rio 500 481 #urio* at uhub? port ? 482 483 # USB Handspring Visor 484 #uvisor* at uhub? port ? 485 #ucom* at uvisor? 486 487 # Kyocera AIR-EDGE PHONE 488 #ukyopon* at uhub? port ? 489 #ucom* at ukyopon? portno ? 490 491 # USB scanners 492 #uscanner* at uhub? port ? 493 494 # USB scanners that use SCSI emulation, e.g., HP5300 495 #usscanner* at uhub? port ? 496 497 # Topfield TF5000PVR range of DVB recorders 498 #utoppy* at uhub? port ? 499 500 # Y@P firmware loader 501 #uyap* at uhub? port ? 502 503 # D-Link DSB-R100 USB radio 504 #udsbr* at uhub? port ? 505 #radio* at udsbr? 506 507 # USB Generic driver 508 #ugen* at uhub? port ? 509 # On ugen bulk endpoints, perform read-ahead and write-behind. 510 #options UGEN_BULK_RA_WB 511 512 513 # IrDA and Consumer Ir devices 514 515 # Toshiba Oboe 516 517 # Audio Devices 518 519 # Audio support 520 #audio* at audiobus? 521 522 #spkr* at audio? # PC speaker (synthesized) 523 524 # MIDI support 525 #midi* at midibus? 526 #midi* at pcppi? # MIDI interface to the PC speaker 527 528 529 530 # Bluetooth Controller and Device support 531 532 # Bluetooth PCMCIA Controllers 533 #bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A 534 535 # Bluetooth USB Controllers 536 #ubt* at uhub? port ? configuration ? interface ? 537 538 # Bluetooth Device Hub 539 #bthub* at bt3c? 540 #bthub* at ubt? 541 542 # Bluetooth HID support 543 #bthidev* at bthub? 544 545 # Bluetooth Mouse 546 #btms* at bthidev? reportid ? 547 #wsmouse* at btms? mux 0 548 549 # Bluetooth Keyboard 550 #btkbd* at bthidev? reportid ? 551 #wskbd* at btkbd? console ? mux 1 552 553 # Bluetooth Audio support 554 #btsco* at bthub? 555 556 557 558 559 # Pseudo-Devices 560 561 #pseudo-device crypto # /dev/crypto device 562 #pseudo-device swcrypto # software crypto implementation 563 564 # disk/mass storage pseudo-devices 565 #pseudo-device ccd # concatenated/striped disk devices 566 #pseudo-device cgd # cryptographic disk devices 567 #pseudo-device raid # RAIDframe disk driver 568 #options RAID_AUTOCONFIG # auto-configuration of RAID components 569 # Options to enable various other RAIDframe RAID types. 570 #options RF_INCLUDE_EVENODD=1 571 #options RF_INCLUDE_RAID5_RS=1 572 #options RF_INCLUDE_PARITYLOGGING=1 573 #options RF_INCLUDE_CHAINDECLUSTER=1 574 #options RF_INCLUDE_INTERDECLUSTER=1 575 #options RF_INCLUDE_PARITY_DECLUSTERING=1 576 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 577 #pseudo-device fss # file system snapshot device 578 #pseudo-device putter # for puffs and pud 579 580 pseudo-device md # memory disk device (ramdisk) 581 #pseudo-device vnd # disk-like interface to files 582 #options VND_COMPRESSION # compressed vnd(4) 583 584 # network pseudo-devices 585 pseudo-device bpfilter # Berkeley packet filter 586 #pseudo-device carp # Common Address Redundancy Protocol 587 pseudo-device ipfilter # IP filter (firewall) and NAT 588 pseudo-device loop # network loopback 589 pseudo-device ppp # Point-to-Point Protocol 590 #pseudo-device pppoe # PPP over Ethernet (RFC 2516) 591 #pseudo-device sl # Serial Line IP 592 #pseudo-device strip # Starmode Radio IP (Metricom) 593 #pseudo-device irframetty # IrDA frame line discipline 594 #pseudo-device tap # virtual Ethernet 595 pseudo-device tun # network tunneling over tty 596 #pseudo-device gre # generic L3 over IP tunnel 597 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 598 #pseudo-device faith # IPv[46] tcp relay translation i/f 599 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 600 #pseudo-device vlan # IEEE 802.1q encapsulation 601 #pseudo-device bridge # simple inter-network bridging 602 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 603 pseudo-device pf # PF packet filter 604 pseudo-device pflog # PF log if 605 # srt is EXPERIMENTAL 606 #pseudo-device srt # source-address-based routing 607 608 # miscellaneous pseudo-devices 609 pseudo-device pty # pseudo-terminals 610 #pseudo-device sequencer # MIDI sequencer 611 #options RND_COM # use "com" randomness as well (BROKEN) 612 pseudo-device clockctl # user control of clock subsystem 613 pseudo-device ksyms # /dev/ksyms 614 615 # a pseudo device needed for Coda # also needs CODA (above) 616 #pseudo-device vcoda # coda minicache <-> venus comm. 617 618 # a pseudo device needed for SMBFS 619 #pseudo-device nsmb # experimental - SMB requester 620 621 # wscons pseudo-devices 622 #pseudo-device wsmux # mouse & keyboard multiplexor 623 #pseudo-device wsfont 624 625 #options FILEASSOC # fileassoc(9) - required for Veriexec 626 # and PAX_SEGVGUARD 627 628 # Veriexec 629 #pseudo-device veriexec 630 # 631 # Uncomment the fingerprint methods below that are desired. Note that 632 # removing fingerprint methods will have almost no impact on the kernel 633 # code size. 634 # 635 #options VERIFIED_EXEC_FP_RMD160 636 #options VERIFIED_EXEC_FP_SHA256 637 #options VERIFIED_EXEC_FP_SHA384 638 #options VERIFIED_EXEC_FP_SHA512 639 #options VERIFIED_EXEC_FP_SHA1 640 #options VERIFIED_EXEC_FP_MD5 641 642 options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 643
Indexes created Tue Sep 30 20:09:53 GMT 2025